Recovery and MBR

I recently purchased a Sartellite Core I7 with Win7 64bit installed. I don't have the exact model number since I am posting from a different machine. Anyway here is my situation: I recently contracted a rootkit (Alureon.A). My automatic update began failing and started popping an error describing what was wrong. I followed links and downloaded software to remove it. Nothing seemed to remove it and since the computer was so new I just decided to use the recovery partition on the hard drive. It installed perfectly and the computer is as good as new. My question is: Did the recovery completely overwrite and create a new master boot record, effectively getting rid of the rootkit? I prefer not to wipe the drive to DoD standards since the drive is over 500GB in size. Quite a lengthy process and it would destroy my recovery partition.
Solved!
Go to Solution.

Did the recovery completely overwrite and create a new master boot record, effectively getting rid of the rootkit?
Yes. The recovery process restores every byte on the hard disk. The MBR resides in the first sector.
The recovery does not affect the BIOS, however.
-Jerry

Similar Messages

Rescue and Recovery and mcafee endpoint encryption

just an fyi. Maybe it will save someone hassle. Apparently mcafee endpoint encryption and rescue and recovery are not compatible My company uses mcafee solution to protect data. IT installed corp image and wiped recovery partition. They also missed most of updated lenovo drivers. I have installed Lenovo solution center and followed all suggestios to update drivers etc. And then I followed its solution to install rescue and recovery... And after reboot i got a mcafee message that endpoint encryption is not installed... Apparently rescue and recovery modified MBR of the disk making laptop unusable. Now will have to chase IT guy who installed my laptop in order to recover it. Lenovo developers please add additional check into rescue and recovery install to at least warn user of potential issue if mcafee endpoint encryption is installed. Thanks.

I'm not sure what answer you are looking for. R&R modifies the boot loader, and other software can also modify it. From R&R perspective, we can't possibly know every other piece of software that modifies the boot loader, or know when an existing boot loader is already installed which is incompatible with R&R.
If your company uses Sophos Safeguard or WinMagic SecureDoc, instead of McAfee Endpoint Encryption, the same scenario would work.
More information about the R&R boot loader is in the R&R deployment guide here:
http://support.lenovo.com/en_US/guides-and-manuals/detail.page?DocID=UM007642
McAfee should have tools that can repair its boot loader.

Did PC Recovery and Dowloaded iTunes, wont open, only get error reports.

I just did a PC recovery and have all of my music from iTunes backed up on a dock drive. I just re-downloaded iTunes and installed it. iTunes won't open, I just get an error report every time. I clicked on the setup file and tried to repair it. I've uninstalled it and redownloaded it. Still the same result. Does anyone have any ideas on what else I could do?

does that help anyone?
dv8000 Windows XP

HT1212 My 7 year pls has forgotten her passcode for her iPod touch. I have put it into recovery and through iTunes tried to restore. But it will only let me also try to update it with iOS 6.1.3 which no longer allows the bypass of the passcode. Can anyone

My 7 year old has a passcode on her iPod touch. She forgot it, after multiple attempts at what it could have been, it comes up with disabled etc.....I have tried it in recovery and hooking it up to iTunes (which the device has been previously synced up to) to restore. But the problem I am having is it only gives me the option to update also, to iOS 6.1.3 with the new bug fix which it won't allow you to bypass the passcode. It gets a little into the downloading, turns the iPod on and then asks for the passcode to continue?! I am at a loss as to what to do now, as every forum says put it in recovery and restore. I can't use the 'find my iPhone' app as the iPod is offline. I've tried it on a laptop not prev synced up to and get the same problem. Has any one got any ideas!

Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer

My ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend

my ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend

I have not seen a solution for error (1)
make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT1339 I have tried restoring an Ipod Nano 6th Generation but it seems to keep looping back and saying it is in recovery and needs restoring, can anyone help?

I have tried restoring an Ipod Nano 6th Generation but it seems to keep looping back and saying it is in recovery and needs restoring, can anyone help?

Try doing a level reformat of the iPod's flash storage instead to see if that kills the restore loop using the instructions in the article below.
http://www.methodshop.com/gadgets/ipodsupport/erase/
B-rock

I just downloaded version 7.1.1 and my phone is stuck on a screen showing me to plug phone into computer and go to iTunes. When I do this, iTunes says my phone is in recovery and I need to do a hard restore. Doing this, it says it will go back to factory

how can I keep my data doing a hard recovery on my phone? I uploaded newest version and phone is stuck on a screen telling me to plug phone into computer and go to iTunes, when I do this, iTunes says my phone is in recovery and I need to restore, Can anyone please help me get my phone back without losing anything?

You shouldn't have to restore your phone to keep your data. But first press home and on button at the same time until phone shows up Apple logo an boots up normally. When the phone comes back on plug into ituens and back it up by selecting "Back Up Now". Once backed up, you can press update and install 7.1.1 and it will restore and recover all your previously backed up data. You can also press "update" and itunes will automtically back up the phoen and install 7.1.1.

Welcome to the SQL Server Disaster Recovery and Availability Forum

(Edited 8/14/2009 to correct links - Paul)
Hello everyone and welcome to the SQL Server Disaster Recovery and Availability forum. The goal of this Forum is to offer a gathering place for SQL Server users to discuss:
Using backup and restore
Using DBCC, including interpreting output from CHECKDB and related commands
Diagnosing and recovering from hardware issues
Planning/executing a disaster recovery and/or high-availability strategy, including choosing technologies to use
The forum will have Microsoft experts in all these areas and so we should be able to answer any question. Hopefully everyone on the forum will contribute not only questions, but opinions and answers as well. I’m looking forward to seeing this becoming a vibrant forum.
This post has information to help you understand what questions to post here, and where to post questions about other technologies as well as some tips to help you find answers to your questions more quickly and how to ask a good question. See you in the group!
Paul Randal
Lead Program Manager, SQL Storage Engine and SQL Express
Be a good citizen of the Forum
When an answer resolves your problem, please mark the thread as Answered. This makes it easier for others to find the solution to this problem when they search for it later. If you find a post particularly helpful, click the link indicating that it was helpful
What to post in this forum
It seems obvious, but this forum is for discussion and questions around disaster recovery and availability using SQL Server. When you want to discuss something that is specific to those areas, this is the place to be. There are several other forums related to specific technologies you may be interested in, so if your question falls into one of these areas where there is a better batch of experts to answer your question, we’ll just move your post to that Forum so those experts can answer. Any alerts you set up will move with the post, so you’ll still get notification. Here are a few of the other forums that you might find interesting:
SQL Server Setup & Upgrade – This is where to ask all your setup and upgrade related questions. (http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/threads)
Database Mirroring – This is the best place to ask Database Mirroring how-to questions. (http://social.msdn.microsoft.com/Forums/en-US/sqldatabasemirroring/threads)
SQL Server Replication – If you’ve already decided to use Replication, check out this forum. (http://social.msdn.microsoft.com/Forums/en-US/sqlreplication/threads)
SQL Server Database Engine – Great forum for general information about engine issues such as performance, FTS, etc. (http://social.msdn.microsoft.com/Forums/en-US/sqldatabaseengine/threads)
How to find your answer faster
There is a wealth of information already available to help you answer your questions. Finding an answer via a few quick searches is much quicker than posting a question and waiting for an answer. Here are some great places to start your research:
SQL Server 2005 Books Onlinne
Search it online at http://msdn2.microsoft.com
Download the full version of the BOL from here
Microsoft Support Knowledge Base:
Search it online at http://support.microsoft.com
Search the SQL Storage Engine PM Team Blog:
The blog is located at https://blogs.msdn.com/sqlserverstorageengine/default.aspx
Search other SQL Forums and Web Sites:
MSN Search: http://www.bing.com/
Or use your favorite search engine
How to ask a good question
Make sure to give all the pertinent information that people will need to answer your question. Questions like “I got an IO error, any ideas?” or “What’s the best technology for me to use?” will likely go unanswered, or at best just result in a request for more information. Here are some ideas of what to include:
For the “I got an IO error, any ideas?” scenario:
The exact error message. (The SQL Errorlog and Windows Event Logs can be a rich source of information. See the section on error logs below.)
What were you doing when you got the error message?
When did this start happening?
Any troubleshooting you’ve already done. (e.g. “I’ve already checked all the firmware and it’s up-to-date” or "I've run SQLIOStress and everything looks OK" or "I ran DBCC CHECKDB and the output is <blah>")
Any unusual occurrences before the error occurred (e.g. someone tripped the power switch, a disk in a RAID5 array died)
If relevant, the output from ‘DBCC CHECKDB (yourdbname) WITH ALL_ERRORMSGS, NO_INFOMSGS’
The SQL Server version and service pack level
For the “What’s the best technology for me to use?” scenario:
What exactly are you trying to do? Enable local hardware redundancy? Geo-clustering? Instance-level failover? Minimize downtime during recovery from IO errors with a single-system?
What are the SLAs (Service Level Agreements) you must meet? (e.g. an uptime percentage requirement, a minimum data-loss in the event of a disaster requirement, a maximum downtime in the event of a disaster requirement)
What hardware restrictions do you have? (e.g. “I’m limited to a single system” or “I have several worldwide mirror sites but the size of the pipe between them is limited to X Mbps”)
What kind of workload does you application have? (or is it a mixture of applications consolidated on a single server, each with different SLAs) How much transaction log volume is generated?
What kind of regular maintenance does your workload demand that you perform (e.g. “the update pattern of my main table is such that fragmentation increases in the clustered index, slowing down the most common queries so there’s a need to perform some fragmentation removal regularly”)
Finding the Logs
You will often find more information about an error by looking in the Error and Event logs. There are two sets of logs that are interesting:
SQL Error Log: default location: C:\Program Files\Microsoft SQL Server\MSSQL.#\MSSQL\LOG (Note: The # changes depending on the ID number for the installed Instance. This is 1 for the first installation of SQL Server, but if you have mulitple instances, you will need to determine the ID number you’re working with. See the BOL for more information about Instance ID numbers.)
Windows Event Log: Go to the Event Viewer in the Administrative Tools section of the Start Menu. The System event log will show details of IO subsystem problems. The Application event log will show details of SQL Server problems.

hi,I have a question on sql database high availability. I have tried using database mirroring, where I am using sql standard edition, in this database mirroring of synchronous mode is the only option available, and it is giving problem, like sql time out errors on my applicatons since i had put in the database mirroring, as asynchronous is only available on enterprise version, is there any suggestions on this. thanks ---vijay

I have had to update my iphone 4 through itunes and it has come up that itunes has found a iphone that is in recovery and needs to be restored, I cannot loose all my pics on my phone so need to know what I can do! My phone is not working now.

I have had to update my iphone 4 in itunes and it has now come up with a message, itunes has found a iphone in recovery and needs to restore it.
I dont want to do this as I cannot loose all my pics on my phone!
My phone is now not working and has an itunes symbol on it with a usb cord!!!!
Please help!!

Reset, hold both home and power buttons until the iPhone begins to start, try this a few times if necessary. If still problem, you may have to just Restore your iPhone to get it working. In the future sync your iPhone with iTunes routinely and when it contains important data, iCloud when set correctly will do this for you continuously.

Windows 8.1 Pro, Type recovery and Search can't find anything

System is installed in a classroom with the latest updates. One of the lessons had the students type
recovery on the Tiles page and it should return 5 results (the other 10 systems in the room returned the correct results). This system couldn't find anything so I got called to troubleshoot.
I first compared locations being searched in Indexing Options
to the system right next to this system. They were identical. Next, I went into
Advanced and chose the Delete and Rebuild Index option. Weirdly, while the indexing was going on, I did a search for
recovery and it found some entries. I didn't think to compare the results to the other system, I just assumed I had resolved the problem. No luck, after the indexing was complete, I typed in
recovery and no results were found!
Since another option under Advanced is to choose a new location for the
Index File. I figured it couldn't hurt although I didn't think it would help either. I decided to more the
index file to the root directory on the C: drive. That didn't work, the system just ignored the change. Each system is this classroom has two
BACKUP partitions on the external drive attached to each system. We use
System Images so that's why two BACKUP partitions, allows us to always have at least one backup in case something happens. I next tried relocating the
Index File to the second BACKUP partition (H:). Surprisingly, that fixed the problem. My question is: WHY!!!

Hi,
According to your description,it seems that the permission caused this issue.
I suggest that you try using build-in administrator to test it.
Also,check the Write permission on the C:drive.
Regards,
Kelvin Xu
TechNet Community Support

Recovery and data preservation

I have a hp pavilion dv 8000. Had a operating system crash. Goes to windows xp prof sTar up screen then asks for safe mode, safe mode with networking etc. selecting any will cause system to reboot and start process over in a perpetual loop. It has two physicla drives. Hitachi. When it was operating ok it had a c drive for software exe. And d drive for data. When I use an adapter to see each drive after removing them, all I see is a f drive for my data on one physical drive and f disk and recovery g disk on the other. Files on recovery seem to be hidden. The operating system xp is corrupt so I should see the c drive, but don,t I want to get some pst files out of c drive. How do it do it Also i made recovery disks about 3 yrs ago. If I use them wil I lose all pst on c drive and data on d drive? NEED HELP!

Jim,
Thanks for chiming in on a topic where I didn't expect to get many replies. All of your comments are well appreciated. I was basically asking because I was under the impression that unless your master is in RAW format, making adjustments to exposure, contrast and even recovery and black point would not do much and could even be detrimental to things such as skin tone, etc. I like to shoot in RAW for the reason of being able to have more fine control to adjustments, but for everyday shots and portraits I don't always go to RAW format since a lot of the time I have trouble getting the shot right with the manual controls. I also don't want the large RAW files for every shot that I take. Still, a lot of JPEG's need adjustments, even if just minor tweaks. The tweaks I make look fine on the screen, but I wasn't sure if they would look okay when printed out and I didn't want to spend countless hours making adjustments and spend (waste) money on prints that weren't going to come out good.
Anyway, that is the background to my thinking in making this post. Thanks again for chiming in.
Mac

Recovery and support drives

HP laptops come with a couple of extra drives for recovery and support purposes. I'm wondering if these drives actually need a drive letter assigned to them or if the drive letter can be changed.
All and any comments greatly appreciated.
WD
This question was solved.
View Solution.

Hi, WD.
Yes the recovery partition is tied to the drive letter.
Don't re-letter anything you see.
If you want to add a partition, I would assign it a drive letter past the last lettered drive you see.
If you need to recover your OS, back up anything on any partition you create, as the recovery process will set the hard drive back to its orignal configuration.
Some folks find that out the hard way.

I need help reinstalling Adobe Photoshop Elements 12 and Premium Elements 12. I have opaid for these programs however my computer recently needed to be reset via recovery and they were erased, Any help? The link Adobe chat gave me download something-but t

Help. Need to reinstall Adobe Photoshop Elements 12 and Premier Elements 12. Both are pre paid programs that I had on computer, however the system needed to be reset via recovery and these programs were erased> Since I already forked out the cash for these I'd like to be using them as I am an artist and need the programs. Please, any help? Ideas?

You should try to keep the title short and sweet and put the details in the message... it's a mystery what happened regarding the download link, so here's some...
PSE 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
PE 10, 11, 12 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html

How to have Snow Leopard, Mavericks with built-in recovery, and Windows 7 (Bootcamp) on my iMac (Intel)?

I would like to have Snow Leopard, Mavericks with built-in recovery, and Windows 7 (Bootcamp) on my iMac (Intel). Is this possible? If so, how? Currently, I have Snow Leopard and Windows 7 (Bootcamp) running on my iMac. I have enough disk space to split my Snow Leopard partition. I have read that if I split my Snow Leopard partition, clone my Snow Leopard partition to the new partition, and boot to the new partition, that I may have problems with the Maverick's upgrade because it may not be able to create the recovery parition, or that it may erase the Windows partition, or that it may mess up the Windows boot process.

Simplest is to install Mavs on an ext HD, using FW or TB. I don't do windoze, so can't advise about the Boot Camp and multiple volumes issue. Since there's no Boot Camp, I have four volumes running SL through Mavs.

Help required . Disk recovery and OS installation

Hallo, I'm following a procedure I was given by a Genius at Apple Store. I had an issue with the disk and I formatted and I was trying to install the OS. it went for Internet recovery and it asked me to install Mountain Lion (which I hadn't bought before. So I wasn't allowed to install it.
Then I went to a different machine, a MacBook and I bought with my apple I'd the mountain lion OS. But it yet doesn't allow the installation.. Any hint?
Thanks a lot
Andrea

Also another question. To install the SDK1.4, do I just install it like I normally do as in a Win98 box? I thought there was a XP plug-in that needed to be downloaded and installed too some time ago? Did the plug-in later became built into the installation bundle? I read somewhere there was a legal judgement made to force Microshaft to support Java?
Sorry I've been out of the XP loop...

Recovery and MBR

Similar Messages

Maybe you are looking for