Recovery CD error on Equium - missing NTSF.SYS

Hello
This is my first post to this forum. I have a Toshiba Equium, about 18 months old. Had a problem with the OS windows XP, so tried to use the recovery disk. I chose the simple option and the ghost utility appears to work until you re-boot. It then tells me i have a missing or corrupt file.
first file missing is ISAPNP.SYS if i copy this from a XP disk it then tells me that NTSF.SYS is missing. I don't believe this is a recovery process problem, it maybe the hard drive. I have used FDISK to format.
Does anyone have nay other suggestions
thank you for your time
Kev

Hello Kev
It will be interesting to know which notebook model you have. Anyway, if the HDD is not defective and if the recovery image can be installed to the end everything must work well.
It is not easy to say what is problem there but if possible try to obtain second HDD and check recovery procedure again. If everything works well you will know what the problem was.
Let us know how you will handle with this issue.

Similar Messages

Recovery help needed for Equium A300D-13X

Hi all,
After experiencing too many problems to list with my Equium A 300D 13X, both hardware and software, I decided to go ahead with a complete restoration to factory settings.
My first step was to create 2 dvd recovery discs, using the Toshiba recovery disc creator.
As far as I can tell, both recovery disc's were successfully created, insofar as the recovery disc creator said as such.
Not knowing what step to take next, I started the laptop with the fist of the two recovery disc within the disc drive, thinking this would reset the laptop to it's factory settings, however it did not.
Now when I start up the laptop I get the following message;
BOOTMGR is missing
Press Ctrl+Alt+Del to restart
which restarts the laptop again displaying the above message.
Pressing F8 on start up does nothing.
Pressing F12, multi boot selection, brings up a Boot Menu with 3 options;
HDD1: TOSHIBA MK2046GSX-(S1)
CD/DVD: MAT****ADVD-RAM UJ-850S-(PM)
LAN: Marvell Yukon 88E8040T
If I select the CD/DVD option, a black screen with the text ;
Windows is loading files
is shown. I'am guessing this is the correct path to recovery,
however after the following recovery utility screens regarding language selection etc, a text filled dialogue box
X:\windows\systems32\cmd.exe
runs through, but ultimately becomes static at the line:
Copying F:\06948XSP.swm to V:\HDDRecovery\SWImg 1/6
without successfully finishing the recovery process.
Any help in resolving this problem would be greatly appreciated.
Kind regards,
Kev.

> My first step was to create 2 dvd recovery discs, using the Toshiba recovery disc creator.
> As far as I can tell, both recovery disc's were successfully created, insofar as the recovery disc creator said as such.
What to say buddy you have done everything correctly.
The recover disk has been created successfully (did you see a message saying this??).
Booting from recovery disk should start the recovery procedure and you should follow the installation on the screen.
Usually this should function.
The error; BOOTMGR is missing says that boot manager on HDD has been deleted and its not possible to boot from HDD.
You should boot from CD as you did; pressing F12 choosing CD/DVD drive
Try to format the HDD again using another Windows CD.
In such case you will need to set SATA mode to compatible in BIOS and then you could boot from WinXP CD.
After that try the recovery disk again

Impdp triggers always give error ORA-04071:missing BEFORE, AFTER or INSTEAD

Hello,
I am using 11g impdp to create a test system.
I use this cmd to import
impdp 'SYS/xxxxx@PWRFUN AS SYSDBA' dumpfile=PWRPROD.DMP logfile=PWRFUNimportPROD.log SCHEMAS=pwrplant TABLE_EXISTS_ACTION=REPLACE
Then I get this error for all the triggers
ORA-39083: Object type TRIGGER failed to create with error:
ORA-04071: missing BEFORE, AFTER or INSTEAD OF keyword
Failing sql is:
CREATE TRIGGER "PWRPLANT"."APPROVAL_STEPS_HISTORY" PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
FOR EACH ROW
BEGIN    :new.user_id := USER;    :new.time_stamp := SYSDATE; END;
As you can see, the trigger does contain the word "before".
When I remove " "PWRPLANT"."APPROVAL_STEPS_HISTORY" " and run the trigger below, it compiles correctly. Why is this, and how do I make my impdp to run correctly?
CREATE TRIGGER PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
FOR EACH ROW
BEGIN    :new.user_id := USER;    :new.time_stamp := SYSDATE; END;

same error, thanks for your attemp
Error starting at line 1 in command:
CREATE TRIGGER "PWRPLANT"."APPROVAL_STEPS_HISTORY" PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
REFERENCING new AS new
FOR EACH ROW
BEGIN :new.user_id := USER; :new.time_stamp := SYSDATE; END;
Error report:
ORA-04071: missing BEFORE, AFTER or INSTEAD OF keyword
04071. 00000 - "missing BEFORE, AFTER or INSTEAD OF keyword"
*Cause:    The trigger statement is missing the BEFORE/AFTER/INSTEAD OF clause.
*Action:   Specify either BEFORE, AFTER or INSTEAD OF.

Nakisa 4.1 - TalentHubHRExec missing masterBuild.sys does not exist

Dear Gurus,
I'm not able to do searching using employee on Nakisa TalenHubHRExec using employee listing anda position listing on data grid list.
I check from cds.log show missing masterBuild.sys does not exist, appreciate if can advise where should i get the file.Below i capture 2 error from the log, i already follow based on NakisaAdmin guide for Role Authorization Mapping using NakisaAdminConsole.
Error 1
04 Mar 2014 11:49:13 ERROR com.nakisa.Logger - Strings : readFile : java.io.FileNotFoundException: File 'NakisaPath\apps\Nakisa\TalentHubHRExec\servlet_jsp\TalentHubHRExec\root\.system\Admin_Config\__000__TalentHubHRExec_TF\masterBuild.sys' does not exist
04 Mar 2014 11:49:13 ERROR com.nakisa.Logger - java.io.FileNotFoundException: File ''NakisaPath\apps\Nakisa\TalentHubHRExec\servlet_jsp\TalentHubHRExec\root\.system\Admin_Config\__000__TalentHubHRExec_TF\masterBuild.sys' does not exist at org.apache.commons.io.FileUtils.openInputStream(FileUtils.java:137)
Error 2
04 Mar 2014 11:53:33 ERROR com.nakisa.Logger - com.nakisa.manager.ui.subucs.RoleMapping : getRolesDataSet : Error with roles DataSet. Connection String: ASHOST=NakisaHost SYSNR=00 CLIENT=100 USER=firhasa PASSWD=passwd
04 Mar 2014 12:02:24 ERROR com.nakisa.Logger - RoleMapping_SAP.MapRoles() : Message: while trying to invoke the method com.sap.mw.jco.JCO$Function.getImportParameterList() of a null object loaded from local variable 'function'
Regards
Mohamad Firhad Samuri

Hi Mohamad,
Your cds logs shows different errors however i have few questions here in terms of troubleshooting.
1. Any search listings worked earlier or it never worked ?
2. Have you properly imported the abap add-ons and transport pack ?
3. Do you have any customizations in listings ?
4. TREX is working fine, please confirm with Basis
5. Have you imported and exported the build ?
Dipak Bujjad

I work with a Mac & I had to restore my computer for my time machine back-up. When I attempt to open/edit a photo with either camera raw or photoshop I get the following error message: Error 150:30 , it also sys that licensing for the product has stopped

I work with a Mac & I had to restore my computer for my time machine back-up. When I attempt to open/edit a photo with either camera raw or photoshop I get the following error message: Error 150:30 , it also sys that licensing for the product has stopped working?

Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene

Getting error like "Error in portal_sso_redirect: missing application registration information" while trying to run application using Oracle SSO

Hi All,
I am trying to implement SSO authentication for my APEX application. I have registered the application as a SSO partner application.
I have set the authentication scheme to Oracle Application server Single Sign On.
When i run the application i am getting the below error.
Error in portal_sso_redirect: missing application registration information: p_partner_app_name:g_listener_token:HTML_DB:ofss220104.in.oracle.com:5050Please register this application as described in the installation guide.
Please help me to resolve this.
Thanks and Regards,
Suhas

Suhas,
After you registered your application as a SSO partner application did you use the information from Oracle SSO (home URL, success URL, Logout URL, app_name etc) and loaded it into the APEX_SSO schema using the regapp.sql script from the ssosdk?
Step 4 of http://www.oracle.com/technetwork/testcontent/sso-partner-app-100552.html#INSTALL
Ricker

Error in portal_sso_redirect missing application registration information:

Hi,
I am getting the following error message, when i run any of my APEX Page. Please help me to resolve this issue.
Error in portal_sso_redirect missing application registration information:
p_partner_app_name:g_listerner_token:HTML_DB:stbp5.oracle.com:80
please register this application as described in the installation guide.
What is the issue? What is the fix for that?
Regards
Balaji S

Suhas,
After you registered your application as a SSO partner application did you use the information from Oracle SSO (home URL, success URL, Logout URL, app_name etc) and loaded it into the APEX_SSO schema using the regapp.sql script from the ssosdk?
Step 4 of http://www.oracle.com/technetwork/testcontent/sso-partner-app-100552.html#INSTALL
Ricker

IR Report Search - ORA-20001: get_dbms_sql_cursor error ORA-00936: missing expression

Hi All,
I had created a IR report based on a table and it was working with no issues. But after few days, when I try searching using the IR search bar it shows "ORA-20001: get_dbms_sql_cursor error ORA-00936: missing expression" error message. I don't see any debug messages or errors in the debug window. The Finder drop down is empty too, there are no columns displayed to filter.
When I recreate the IR report(new page) based on the same table, It works fine and there are no issues with the search. But the old IR report search doesnt work. I have not modified the any thing in the old report after initial creation. Report uses Primary key based on a sequence.
What might have caused this issue?
Is there a way to intercept the search query from IR report?
Apex version - 4.2.3.00.08.
Any help on this appreciated.
Thanks,
Jagan

Hi MK, as I had mentioned in my post, I don't see any logs in the debug window, query tab.
Can you please guide me how to check the query logs on search?
Thanks,
Jagan

ERROR: ORACLE prepare error: ORA-00936: missing expression

Hello,
I am required to run "pass-through" Oracle SQL, to extract data from tables into SAS for processing and manipulation. My code (attached) reads and writes (executes) but with zero records to test first. I cannot get past the Prepare Error.
The query is very much like other queries that seem to work, but I cannot get past this prepare error. I have no other access to individauls with adequate knowledge of PL SQL, and as a last stop hoped others in the forum could quickly spot the source of errror.
Thanks very much in advance for any assistance.
Jeff
1 ;*';*";*/;quit;run;
2 OPTIONS PAGENO=MIN;
3 %LET _CLIENTTASKLABEL=%NRBQUOTE(rx_biplr_v3_2);
4 %LET _EGTASKLABEL=%NRBQUOTE(rx_biplr_v3_2);
5 %LET _CLIENTPROJECTNAME=%NRBQUOTE();
6 %LET _SASPROGRAMFILE=;
7
8 ODS _ALL_ CLOSE;
NOTE: Some of your options or statements may not be supported with the Activex or Java series of devices. Graph defaults for these
drivers may be different from other SAS/GRAPH device drivers. For further information, please contact Technical Support.
9 OPTIONS DEV=ACTIVEX;
10 FILENAME EGHTML TEMP;
NOTE: Writing HTML(EGHTML) Body file: EGHTML
11 ODS HTML(ID=EGHTML) FILE=EGHTML ENCODING='utf-8' STYLE=EGDefault
11 ! STYLESHEET=(URL="file:///C:/Program%20Files/SAS/Shared%20Files/BIClientStyles/EGDefault.css")
11 ! ATTRIBUTES=("CODEBASE"="http://www2.sas.com/codebase/graph/v91/sasgraph.exe") NOGTITLE NOGFOOTNOTE GPATH=&sasworklocation
11 ! ;
12
13 %gaccessible;
14 /********************************************************/
15 * RX_BIPLR_V3.SAS ;
16 /********************************************************/
17
18 dm 'log;clear;out;clear';
19 options linesize =120;
20 Option obs=0 NoReplace;
21
22 ****************************************************************************************;
23 *Date Programmer Reviewed By WHAT WAS DONE;
24 *----- -------------- ------------ -----------------------------------------;
25 *2005 David Boyd Program creation for test population;
26 *;
27 *02/06/2006 Ivon Jones Modified to include total population;
28 *;
29 *07/20/2006 Ivon Jones Identified data elements for exclusion;
30 * or inclusion for consolidation with ;
31 * Robin's report;
32 *;
33 *08/18/2006 Ivon Jones Updated the Specific Therapeutic Classes;
34 * 10-2009 J Shaf - modified to extract actual or potential Bipolar Dx from UBH and Medical Claims;
35 ****************************************************************************************;
36
37
38
39 *%let allclmorgn = ('M','A') ; /* all claims origin code */
40 %let begdate='01SEP2009'd;
41 %let enddate='30SEP2009'd;
42 %let q = %str(%') ;
43
44
45 data _null_ ;
46 call symput('fdos',put(intnx('month',"&begdate"d,-27,'beginning'), date9.) ) ;
47 call symput('ldos',put(intnx('month',"&enddate"d,-0,'ending'), date9.) ) ;
48 run ;
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
2 The SAS System 11:44 Friday, October 30, 2009
cpu time 0.01 seconds
49
50
51
52 **************************************************************;
53 * ??Use the data _null_ step to create a macro variable for the ;
54 * year and month based on the ldos macro variable in the data ;
55 * step above?? ;
56 **************************************************************;
57
58
59 data _null_ ;
60 if month("&ldos"d) < 10
61 then call symput('yr_mo',compress(year("&ldos"d) || '0' || month("&ldos"d) ) ) ;
62 else call symput('yr_mo',compress(year("&ldos"d) || month("&ldos"d) ) ) ;
63 run ;
NOTE: Numeric values have been converted to character values at the places given by: (Line):(Column).
61:39 61:64 62:39 62:57
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.00 seconds
64
65 *%put &biplr_dx;
66 %put &begdate ;
'01SEP2009'd
67 %put &enddate ;
'30SEP2009'd
68 %put &fdos ;
01JUN2007
69 %put &ldos ;
30SEP2009
70 %put &q ;
71
72
73 libname biplr'/home/jshafi01/projects/adhoc/biplr_dprsn/data';
NOTE: Libref BIPLR was successfully assigned as follows:
Engine: V9
Physical Name: /home/jshafi01/projects/adhoc/biplr_dprsn/data
74 libname rosdwp oracle user="&oracle_user." pass="&oracle_pass." buffsize=32767 path='rosdwp';
NOTE: Libref ROSDWP was successfully assigned as follows:
Engine: ORACLE
Physical Name: rosdwp
75
76 data work.biplr_up_v1;
77 attrib mbr_id length=$26;
78 set biplr.biplr_ubh_med_v1;
79 run;
NOTE: There were 0 observations read from the data set BIPLR.BIPLR_UBH_MED_V1.
NOTE: The data set WORK.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: DATA statement used (Total process time):
real time 0.01 seconds
3 The SAS System 11:44 Friday, October 30, 2009
cpu time 0.00 seconds
80
81 proc contents;
82 run;
NOTE: PROCEDURE CONTENTS used (Total process time):
real time 0.03 seconds
cpu time 0.03 seconds
83
84 proc datasets
85      library = rosdwp nolist;
86      delete biplr_up_v1;
87 quit;
NOTE: Deleting ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: PROCEDURE DATASETS used (Total process time):
real time 3.74 seconds
cpu time 0.03 seconds
88
89 proc datasets
90      library=work nolist;
91      copy out = rosdwp move;
92      select biplr_up_v1 ;
93 quit;
NOTE: Moving WORK.BIPLR_UP_V1 to ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: SAS variable labels, formats, and lengths are not written to DBMS tables.
NOTE: There were 0 observations read from the data set WORK.BIPLR_UP_V1.
NOTE: The data set ROSDWP.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.32 seconds
cpu time 0.04 seconds
94
95
96
97 *****************************************************************************;
98
99 *execute(commit) by rosdwp
100 ******************************************************************************;
101
102
103 proc SQL noprint ;
104 connect to oracle as rosdwp (user="&oracle_user." password="&oracle_pass" buffsize=32767 path='rosdwp'
104 ! preserve_comments);
105      execute(alter session set nls_date_format = 'ddmonyyyy') by rosdwp;
106 CREATE table biplr_rx as
107 SELECT
108 mrb_id,
109 pcp_spc,
110 rx_date,
4 The SAS System 11:44 Friday, October 30, 2009
111 brand,
112 generic,
113 ahfs_cd,
114 ahfs_dsc,
115 lbl,
116 strngth,
117 unt,
118 spc_tx_cls_cd,
119 spc_tx_cls_dsc,
120 gcn,
121 rx_num,
122 rx_ingrd,
123 rx_paid,
124 rx_cnt,
125 rx_qty,
126 rx_day
127 FROM connection to rosdwp
128 (SELECT
129 mid.UNIQ_MBR_ID as mrb_id,
130 pd.PRVDR_SPCLTY_DESC as pcp_spc,
131 pcf.LAST_SRVC_DT as rx_date,
132 dd.BRAND_NAME as brand,
133 dd.GNRC_NAME as generic,
134 dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
135 dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc,
136 dd.LABEL_NAME as lbl,
137 dd.STRNGTH_NUM as strngth,
138 dd.STRNGTH_UNIT_DESC as unt,
139 dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd,
140 dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc,
141 dd.GCN_NUM as gcn,
142 pcf.PRSCRPTN_NUM as rx_num,
143 SUM(pcf.INGRDNT_AMT) as rx_ingrd,
144 SUM(pcf.PD_AMT) as rx_paid,
145 SUM(pcf.UNIT_SRVC_CNT) as rx_cnt,
146 SUM(pcf.DSPNSD_QTY) as rx_qty,
147 SUM(pcf.DAY_SUPLY_CNT) as rx_day
148 FROM
149 PHRMCY_CLM_FACT pcf,
150 MBR_ID_DMNSN mid,
151 DRUG_DMNSN dd,
152 PRVDR_DMNSN pd,
153           biplr_up_v1
154 WHERE
155 (
156 (biplr_up_v1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And
157 (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
158 (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
159 (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
160 (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
161 (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
162 (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN between &q.&fdos.&q and &q.&ldos.&q)
163      )
164 Group By
165 mid.UNIQ_MBR_ID ,
166 pd.PRVDR_SPCLTY_DESC ,
167 pcf.LAST_SRVC_DT ,
168 dd.BRAND_NAME ,
5 The SAS System 11:44 Friday, October 30, 2009
169 dd.GNRC_NAME ,
170 dd.AHFS_THRPTC_CLS_CD ,
171 dd.AHFS_THRPTC_CLS_DESC ,
172 dd.LABEL_NAME ,
173 dd.STRNGTH_NUM ,
174 dd.STRNGTH_UNIT_DESC ,
175 dd.SPECF_THRPTC_CLS_CD ,
176 dd.SPECF_THRPTC_CLS_DESC ,
177 dd.GCN_NUM ,
178 pcf.PRSCRPTN_NUM
179 );
ERROR: ORACLE prepare error: ORA-00936: missing expression. SQL statement: SELECT mid.UNIQ_MBR_ID as mrb_id,
pd.PRVDR_SPCLTY_DESC as pcp_spc, pcf.LAST_SRVC_DT as rx_date, dd.BRAND_NAME as brand, dd.GNRC_NAME as generic,
dd.AHFS_THRPTC_CLS_CD as ahfs_cd, dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc, dd.LABEL_NAME as lbl, dd.STRNGTH_NUM as
strngth, dd.STRNGTH_UNIT_DESC as unt, dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd, dd.SPECF_THRPTC_CLS_DESC as
spc_tx_cls_dsc, dd.GCN_NUM as gcn, pcf.PRSCRPTN_NUM as rx_num, SUM(pcf.INGRDNT_AMT) as rx_ingrd, SUM(pcf.PD_AMT)
as rx_paid, SUM(pcf.UNIT_SRVC_CNT) as rx_cnt, SUM(pcf.DSPNSD_QTY) as rx_qty, SUM(pcf.DAY_SUPLY_CNT) as rx_day
FROM PHRMCY_CLM_FACT pcf, MBR_ID_DMNSN mid, DRUG_DMNSN dd, PRVDR_DMNSN pd, biplr_up_v1 WHERE (
(biplr_up_v1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And (PHRMCY_CLM_FACT.FINL_CLM_KEY =
PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
(PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
(PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN between '01JUN2007'
and '30SEP2009') ) Group By mid.UNIQ_MBR_ID , pd.PRVDR_SPCLTY_DESC , pcf.LAST_SRVC_DT , dd.BRAND_NAME ,
dd.GNRC_NAME , dd.AHFS_THRPTC_CLS_CD , dd.AHFS_THRPTC_CLS_DESC , dd.LABEL_NAME , dd.STRNGTH_NUM ,
dd.STRNGTH_UNIT_DESC , dd.SPECF_THRPTC_CLS_CD , dd.SPECF_THRPTC_CLS_DESC , dd.GCN_NUM , pcf.PRSCRPTN_NUM.
NOTE: PROC SQL set option NOEXEC and will continue to check the syntax of statements.
180 execute (drop table biplr_up_v1) by rosdwp;
NOTE: Statement not executed due to NOEXEC option.
181 disconnect from rosdwp;
NOTE: Statement not executed due to NOEXEC option.
182 quit;
NOTE: The SAS System stopped processing this step because of errors.
NOTE: PROCEDURE SQL used (Total process time):
real time 0.14 seconds
cpu time 0.03 seconds
183
184

Hello Again ,
Wish Oracle was a bit more informative. Am using a SAS Institute Product called Enterprise Guide. A "hot fix" was installed to address an issue that the product appears unable to save the latest version of edited code changes (hence " BETWEEN between" remaining even after a prior edit). In any case, with the change, am now receiving this error:
" ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT"."LAST_SRVC_DT": invalid identifier". (Log file appears below)
-The error remains, regardless of whether one uses "pass through" code to pass the date range to Oracle (which looks ok from the log output below I believe), or if I hard code the date range into the PL SQL query itself.
-The Prepare error always appears at end of the inner SELECT.
-The Prepare error remains, with or without the GROUP BY clause.
Is there anything else here I am missing? Someone suggested a reserve word - but from other ANSI SQL versions, I do not see that is the case. I have consulted SAS Tech Support and SAS List Serve at University of GA. but nothing definitive from these sources. Have requested facility to be able to run Oracle directly, outside this SAS Institute product - in process.
Any suggestions are greatly appreciated. Thanks to everyone very much.
Jeff
14 /********************************************************/
15 * RX_BIPLR_V3.SAS ;
16 /********************************************************/
17
18 dm 'log;clear;out;clear';
19 options linesize =120;
20 Option obs=0 NoReplace;
21
22 ****************************************************************************************;
23 *Date       Programmer         Reviewed By     WHAT WAS DONE;
24 *-----      --------------     ------------    -----------------------------------------;
25 *2005 D. Boyd Program creation for test population;
26 *;
27 *02/06/2006 I. Jones Modified to include total population;
28 *;
29 *07/20/2006 I. Jones Identified data elements for exclusion;
30 * or inclusion for consolidation with ;
31 * Robin's report;
32 *;
33 *08/18/2006 I Jones Updated the Specific Therapeutic Classes;
34 * 10-2009 J Shaf - modified to extract actual or potential Bipolar Dx from UBH and Medical Claims;
35 ****************************************************************************************;
36
37
38
39 *%let allclmorgn = ('M','A') ; /* all claims origin code */
40 %let begdate='01SEP2009'd;
41 %let enddate='30SEP2009'd;
42 %let q = %str(%') ;
43
44
45 data null ;
46 call symput('fdos',put(intnx('month',"&begdate"d,-27,'beginning'), date9.) ) ;
47 call symput('ldos',put(intnx('month',"&enddate"d,-0,'ending'), date9.) ) ;
48 run ;
2 The SAS System 12:46 Monday, November 2, 2009
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.00 seconds
49
50
51
52 **************************************************************;
53 * ??Use the data null step to create a macro variable for the ;
54 * year and month based on the ldos macro variable in the data ;
55 * step above?? ;
56 **************************************************************;
57
58
59 data null ;
60 if month("&ldos"d) < 10
61 then call symput('yr_mo',compress(year("&ldos"d) || '0' || month("&ldos"d) ) ) ;
62 else call symput('yr_mo',compress(year("&ldos"d) || month("&ldos"d) ) ) ;
63 run ;
NOTE: Numeric values have been converted to character values at the places given by: (Line):(Column).
61:39 61:64 62:39 62:57
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.01 seconds
64
65 *%put &biplr_dx;
66 %put &begdate ;
'01SEP2009'd
67 %put &enddate ;
'30SEP2009'd
68 %put &fdos ;
01JUN2007
69 %put &ldos ;
30SEP2009
70 %put &q ;
71
72
73 libname biplr'/home/jshafi01/projects/adhoc/biplr_dprsn/data';
NOTE: Libref BIPLR was successfully assigned as follows:
Engine: V9
Physical Name: /home/jshafi01/projects/adhoc/biplr_dprsn/data
74 libname rosdwp oracle user="&oracle_user." pass="&oracle_pass." buffsize=32767 path='rosdwp';
NOTE: Libref ROSDWP was successfully assigned as follows:
Engine: ORACLE
Physical Name: rosdwp
75
76 data work.biplr_up_v1;
77 attrib mbr_id length=$26;
78 set biplr.biplr_ubh_med_v1;
79 run;
NOTE: There were 0 observations read from the data set BIPLR.BIPLR_UBH_MED_V1.
NOTE: The data set WORK.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.01 seconds
80
81 proc contents;
82 run;
NOTE: PROCEDURE CONTENTS used (Total process time):
real time 0.02 seconds
cpu time 0.02 seconds
83
84 proc datasets
85      library = rosdwp nolist;
86      delete biplr_up_v1;
87 quit;
NOTE: Deleting ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.61 seconds
cpu time 0.01 seconds
88
89 proc datasets
90      library=work nolist;
91      copy out = rosdwp move;
92      select biplr_up_v1 ;
93 quit;
NOTE: Moving WORK.BIPLR_UP_V1 to ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: SAS variable labels, formats, and lengths are not written to DBMS tables.
NOTE: There were 0 observations read from the data set WORK.BIPLR_UP_V1.
NOTE: The data set ROSDWP.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.15 seconds
cpu time 0.04 seconds
94
95
96
97 *****************************************************************************;
98
99 *execute(commit) by rosdwp
100 ******************************************************************************;
101
102
103 proc SQL noprint ;
104 connect to oracle as rosdwp (user="&oracle_user." password="&oracle_pass" buffsize=32767 path='rosdwp'
104 ! preserve_comments);
105      execute(alter session set nls_date_format = 'ddmonyyyy') by rosdwp;
106 CREATE table biplr_rx as
107 SELECT
108 mrb_id,
109 uniq_mbr_id,
110 pcp_spc,
111 rx_date,
112 brand,
113 generic,
114 ahfs_cd,
115 ahfs_dsc,
116 lbl,
117 strngth,
118 unt,
119 spc_tx_cls_cd,
120 spc_tx_cls_dsc,
121 gcn,
122 rx_num,
123 rx_ingrd,
124 rx_paid,
125 rx_cnt,
126 rx_qty,
127 rx_day
128 FROM connection to rosdwp
129 (SELECT
130 mid.UNIQ_MBR_ID as uniq_mrb_id,
131 blpr.mrb_id.mbr_id,
132 pd.PRVDR_SPCLTY_DESC as pcp_spc,
133 pcf.LAST_SRVC_DT as rx_date,
134 dd.BRAND_NAME as brand,
135 dd.GNRC_NAME as generic,
136 dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
137 dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc,
138 dd.LABEL_NAME as lbl,
139 dd.STRNGTH_NUM as strngth,
140 dd.STRNGTH_UNIT_DESC as unt,
141 dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd,
142 dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc,
143 dd.GCN_NUM as gcn,
144 pcf.PRSCRPTN_NUM as rx_num,
145 SUM(pcf.INGRDNT_AMT) as rx_ingrd,
146 SUM(pcf.PD_AMT) as rx_paid,
147 SUM(pcf.UNIT_SRVC_CNT) as rx_cnt,
148 SUM(pcf.DSPNSD_QTY) as rx_qty,
149 SUM(pcf.DAY_SUPLY_CNT) as rx_day
150 FROM
151 PHRMCY_CLM_FACT pcf,
152 MBR_ID_DMNSN mid,
153 DRUG_DMNSN dd,
154 PRVDR_DMNSN pd,
155      BIPLR_UP_V1 blpr
156 WHERE
157 (BIPLR_UP_V1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And
158 (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
159 (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
160 (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
161 (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
162 (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
163 (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN &q.&fdos.&q and &q.&ldos.&q)
164 );
ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT"."LAST_SRVC_DT": invalid identifier. SQL statement: SELECT
mid.UNIQ_MBR_ID as uniq_mrb_id, blpr.mrb_id.mbr_id, pd.PRVDR_SPCLTY_DESC as pcp_spc, pcf.LAST_SRVC_DT as
rx_date, dd.BRAND_NAME as brand, dd.GNRC_NAME as generic, dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc, dd.LABEL_NAME as lbl, dd.STRNGTH_NUM as strngth, dd.STRNGTH_UNIT_DESC as
unt, dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd, dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc, dd.GCN_NUM as gcn,
pcf.PRSCRPTN_NUM as rx_num, SUM(pcf.INGRDNT_AMT) as rx_ingrd, SUM(pcf.PD_AMT) as rx_paid, SUM(pcf.UNIT_SRVC_CNT)
as rx_cnt, SUM(pcf.DSPNSD_QTY) as rx_qty, SUM(pcf.DAY_SUPLY_CNT) as rx_day FROM PHRMCY_CLM_FACT pcf,
MBR_ID_DMNSN mid, DRUG_DMNSN dd, PRVDR_DMNSN pd, BIPLR_UP_V1 blpr WHERE (BIPLR_UP_V1.mbr_id =
MBR_ID_DMNSN.UNIQ_MBR_ID) And (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
(PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
(PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
(PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN '01JUN2007' and '30SEP2009').
NOTE: PROC SQL set option NOEXEC and will continue to check the syntax of statements.
165 execute (drop table biplr_up_v1) by rosdwp;
NOTE: Statement not executed due to NOEXEC option.
166 disconnect from rosdwp;
NOTE: Statement not executed due to NOEXEC option.
167 quit;
NOTE: The SAS System stopped processing this step because of errors.
NOTE: PROCEDURE SQL used (Total process time):
real time 0.24 seconds
cpu time 0.02 seconds
168
Edited by: user12142482 on Nov 2, 2009 4:02 PM

I cannot install iTunes. I get a Windows Error 126 and missing msvcr80.dll. I've tried uninstalling and re-installing based on all the suggestions, but still have an issue

I cannot install iTunes. I get a Windows Error 126 and missing msvcr80.dll. I've tried uninstalling and re-installing based on all the suggestions, but still have an issue. I've removed all the services, tried moving the dll files as suggested, but I still have no success. Spent all day on this issue. I am running windows 7.

Sorry to hear this isn't going smoothly for you. Try Troubleshooting issues with iTunes for Windows updates. You may have seen some of the suggestions here before but is has taken some users more than one attempt.
tt2

HP Officejet Pro 8610 - Error Code: " 0xc19a0013" (missing or failed printhead)

I purchased the printer (HP Officejet Pro 8610 e-All-in-one printer) in January, 2015. The printer functioned properly - copy, fax, and scan, until two days ago. Now, it does not print at all. Received an error code: "0xc19a0013" (Missing or Failed Printhead). An expanded version of the error code reads: "The Printhead appears to be missing, not detected, or incorrectly installed. Error Code: 0xc19a0013. The printer uses a removable printhead, HP Ink Cartridges 950 (black) and 951(cmy). I have used HP Support Troubleshooting recommendations: all software and firmware for this printer is installed; the HP ink cartridges are not low or empty; removed the ink cartridges from the printhead and reinstalled them.
There are multible steps in the troubleshooting recommendation, but I stopped at removing the printhead. Because of my technical inexperience, and there were too many ceveats (beware, caution, proper reinstallation, and etc.) with removing the printhead that could cause greater problems. So, I stopped at removing and cleaning the printhead. Also, used the HP Printer Scan Doctor for assistance. The tool for cleaning the printhead doesn't work. What troubles me most with the 0xc19a0013 error code is its explanation: The printhead appears to be missing, not detected, or incorrectly installed. I can use all the help I can get to understand what is going on with the error code that I have received, and how to resolve the malfunctioning printer.
This question was solved.
View Solution.

Contact HP technical support at 800-474-6836 for more options.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
Country-language selector.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Had error 7 windows error 126 and missing MSVCR80.dill. Went through the steps to uninstall and apple mobile device support will not delete. Now I can't download itunes. Help!!

Had error 7 windows error 126 and missing MSVCR80.dill. Went through the steps to uninstall and apple mobile device would not uninstall. Now I can"t download itunes. Help!!

apple mobile device would not uninstall.
Try using the fixit from the following Microsoft document to remove Apple Mobile Device Support:
Fix problems with programs that can't be installed or uninstalled

TS3694 Trying to install new version of I tunes. Get the following error msgs:Itunes not installed correctly reinstall (Windows error 126), and missing file MSVCR80.DLL?

Trying to upgrade Itunes get the following error msgs: Itunes not installed correctly reinstall (Windows error 126) and missing file MSVCR80.DLL?

Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
(98972)

Hp pavillion a000 recovery disk error.. where to go from here?

HI.. .fIRST Thank you so much for being here today...
I have an HP pavillion a000 which was bought used.
About a week ago I got pre-windows msgs. on the 3rd time it has frozen at this point
Msg as follows...
bla bla.. but windows did not start successfully..
a recent hardwared or software change may have caused this..
It has counted down and started in normal mode..
then it has frozen.. and I have tried to start it it all modes..
This last attempt actually started windows and went back to this screen
I put in the compaq recovery disk... I get red screen saying recovery disk error..
PLEASE Contact support
I have un plugged..re plugged and we go in circles...
I'm not sure where to go from here but any suggestions would be VERY appreciated as I do have some artwork I was doing stuck in computer now..
Do you think it's a software,, hardware or even a virus thing??
Additional info... Hp pavillion a000 system no.174A-ABA. hw bom 8121110 sw bom NA 40
serial no. mxk34916m
operating system.. Windows xp... yes I tried recovery disks I have.. puter says...non compatible..
I use firefox as browser via century link dsl..
I can pull the hard drive and I have a harness for accessing the hard drive directly via usb download if you think that's an option but not letting me into windows even has me doubtful that would work;;;
So as I mentioned.. ANY sugestions you can offer as what to try next would be MOST welcome!
I can replace the computer easy enough but I would love to be ables to rescue my art in progress at least!

Hello ValeryWildflowr,
If the computer was working fine before you might just want to try a system restore. This should correct the problem without affecting any of your files.
Here is a link for a system restore.
Let me know if this helps.

Dynamic table in Oracle report data model using laxical parameter is giving error Ora-00936: missing expression

Hi ,
I am using Oracle report 10G
And trying to create report with dynamic table
SELECT &COL1, &COL2
FROM &TAB
If I put this on data model it gives below error
ORA-00936: missing expression
==> from
Can anybody advise to solve this issue.
Regards,
Brajesh

Look in the Reports Builder Help:
If you want to use lexical references in your SELECT clause, you should create a separate lexical reference for each column you will substitute. In addition, you should assign an alias to each lexical reference.
Does adding the column alias solve the problem?

Recovery CD error on Equium - missing NTSF.SYS

Similar Messages

Maybe you are looking for