Recovery CD for XP in combination with dual HDD on Satellite Pro P300

On my Satellite Pro P300 there are two harddisks, both 160 GB.
At the moment Windows Vista Business is installed, as it was preinstalled.
On the first disk there are 3 partitions, one EISA-partition, one Vista boot-partition and one partition for HHDRecovery (contains image for Vista Product Recovery).
In Vista there is an option for Complete PC Backup. This provides the possibility to completely restore Vista to the situation at the time of the backup.
I made a Full PC Backup of the complete first hard drive (3 partitions) and saved it on the second harddrive.
Now I want to use the provided Toshiba Product Recovery for Windows XP to install Windows XP on the laptop.
I assume that the first harddrive will be completely overwritten, but I am not sure if the second drive will also be overwritten.
Does anybody know if my data on the second drive will be lost when i use the Product Recovery for XP?
I would like to preserve the data on the second drive, because it gives me the option to restore the laptop to the situation with Vista without reinstalling/activating all applications.
Also all my personal files are on that drive.

Normally it would be no problem to temporarily remove the second harddisk.
But I am not sure if my warranty will be void after that; the machine is only a few weeks old.
If the warranty is still valid after removing and reinstalling the second harddisk, I will try that option.
I just wonder if anybody knows for a fact that it does not write the second harddisk.
As you said, I also assume that it will not write the second harddisk, but I just want to be sure.

Similar Messages

  • Use of business partner functionality in combination with dual control

    Is there a generally agreed upon procedure to use the business partner functionality in combination with dual control? The problem is that when you block a business partner, the customer/ vendor master data aren't blocked automatically. You can then still use them in transactions, which leads to problems.
    So is there a way to make this work or a procedure to do this?
    Niels Vanwingh

    Thanks Masa,
    I did notice the 'Add external supplier from' in create supplier or bidder option. However there is a small catch and your experience may help.
    Let me explain the requirement and scenario here in SRM 7.
    We are implementing the Registration of Supplier scenario; both ROS and SRM are in same client. When a potential supplier registers themselves in the registration system, a BP number is created (an Internal number range is defined for this). After accepting the potential supplier in pre-select screen the purchaser has two options to transfer the potential supplier from the ROS system to SRM
    Option 1: He can select the accepted potential supplier from the supplier directory option and transfer the business partner to SRM. In this case the business partner number of the potential supplier is retained in SRM and a business partner with supplier and bidder tag is created. However the purchaser does not have any option to select which type of business partner he would like to create like supplier or bidder.
    Option 2: Purchase can go to create supplier or bidder option and choose the u2018Add external supplier formu2019 from the ROS system and create the business partner. The ROS business partner details are copied to the create supplier screen, but the purchaser have to provide an external business partner number for the supplier. This is because we have defined external number range for business partner for the vendors that are replicated from ERP to SRM.
    Objective is the ROS business partner should be retained in SRM with option to create as supplier and bidder and then manually create ERP supplier with same SRM BP number and map against SRM supplier.
    Is there any way we can achieve this?
    In SRM 5.5 with Manage business partner functionality we could achieve as system give us the option which business partner type we would like to create as well as retains the ROS BP number in SRM.
    Regards
    Sandeep

  • Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? Difference between Enterprise and SE?

    We’re seeing the following issue: sql - Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? - Stack Overflow (posted by a colleague of mine) and are curious to know if this behaviour is due to a difference between standard and enterprise, or could we doing something else wrong in our DB config.?
    We have also reproduced the issue on the following stacks:
    Oracle SE One 11.2.0.3 (with Spatial enabled)
    Redhat Linux 2.6.32-358.6.2.el6.x86_64 #1 SMP Thu May 16 20:59:36 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
    11.2.0.3.0 Standard Edition and 11.2.0.4.0 Standard Edition (both with Spatial enabled)
    Microsoft Windows Server 2003R2 Standard x64 Edition
    However, the SQL works fine if we try it on Oracle 11.2.0.3.0 *Enterprise* Edition.
    Any help or advice would be much appreciated.
    Kindest Regards,
    Kevin

    In my experience sdo_filter ALWAYS uses the spatial index, so that's not the problem. Since you did not provide the explain plans, we can't say for sure but I think yhu is right: Standard Edition can't use the bitmap operations, and thus it'll take longer to combine the results of the two queries (because the optimizer will surely split this OR up in two parts, then combine them).
    BTW: when asking questions about queries here, it would be nice if you posted the queries here as well, so that we do not have to check another website in order to see what you are doing. Plus it will probably get you more answers, because not everyone can be bothered to click on that link. It would also have been nice if you had posted your own answer on the other post here as well, because my recommendation would have been to use union all - but since you already found that out for yourself my recommendation would have been a little late.

  • I lost my recovery partition for hp dv6 63300ee, with windows 7 home,, what can i do to back it?

    i lost my recovery partition for hp dv6 63300ee, with windows 7 home,, what can i do to back it?

    Hi,
    This assumes that Windows 7 was the original OS that your notebook came with.
    If you created a set of Recovery Discs you can use these to reinstall the original OS - they will also re-create the Recovery Partition on the Hard Drive as well as reinstalling all your original software.  Remember this is a destructive process, so back up any personal files etc that you wish to keep before reinstalling the Operating System.
    If you don't have your original Recovery Discs, you can order a replacement set using the link below.
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c00810334&cc=us&lc=en&dlc=en
    If you have any problem with this link, order them directly from HP.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I am using Lightroom on my MAC where I import the finalized JPEG-pictures into iPhoto to create a slideshow (for instance in combination with films). When exporting the slideshow with a 1080p resolution to iTunes I experience difficulties (missing slides

    I am using Lightroom on my MAC where I import the finalized JPEG-pictures into iPhoto to create a slideshow (for instance in combination with films). When exporting the slideshow with a 1080p resolution to iTunes I experience difficulties (missing slides and black transitions). When using JPEG-pictures directly from the camera there are no problems, so the manipulation in Lightroom seem to cause corrupt files. Does anyone recognize tje problem and could it have anything to do with the introduction of the Yosemite software? Is Lightroom already Yosemite-proof?

    In iPhoto 11 the Originals folder is renamed Masters.
    IPhoto menu -> Provide iPhoto Feedback and report the bug.
    Regards
    TD

  • Writing permissions for software in combination with ftp?

    It seems that i have various writing permisions problems, for example:
    1) I use Cyberduck FTP in combination with textwrangler to edit online files, in leopard i can edit a file, but it does not write it correct to ftp location.
    2) In Aptana studio I got the same problem while using ftp acces, it seems that it does write to temp folder local, but it just can't update online.
    3) Repair permissions just failes and gives errors
    I have 2 here (silver and white intel) both with leopard, both with same troubles.

    ..." I get a message saying I do not have permission"...
    That message really annoys me because it is an example of a poorly worded (misleading) dialogue - the problem has nothing to do with unix "permissions". It just means the app isn't in the list of applications approved by the "admin" for use in the managed account.
    If you are the developer, make sure you have given your app a unique 'CFBundleIdentifier' or else it likely won't be possible to add the programme to 'mcx_settings', meaning it won't work in a "managed" account.
    http://docs.info.apple.com/article.html?artnum=300842
    http://developer.apple.com/qa/qa2004/qa1373.html
    If the app isn't a "package", give it a unique "creator" code there is probably some procedure somewhere about figuring out what is allowed or what has already been taken, but I'm not a developer so I can't give you any more details...

  • How to change startup disk for a 2012 Mac mini with dual HDD and clean installed with Windows 8.1?

    Hi,
    I have a Mac-mini (late 2012 model), originally with Mac OS X Maverick Server installed (with two HDD). Recently, I had clean installed Windows 8.1 on one of the HDD (worked perfectly, just slow) and swapped the other HDD (with Mac OSX) with a SSD. I then cloned the Windows OS HDD in to the new SSD. Now I am trying to boot this Mac mini from this SSD, however, since this Mac mini do not have BIOS for me to change the boot sequence at the startup, is there any one can help?
    Thank you,
    Liusc

    If you boot with the Option key depressed what boot options are shown?
    Also:
    Restart your computer
    After Windows is installed, you can switch between OS X and Windows. Use the Startup Disk preference pane in OS X, or the Boot Camp system tray item in Windows to select your startup disk, then restart your computer
    How to install Windows using Boot Camp - Apple Support

  • Fingerprint scanner issue with Win 7 and Satellite Pro A300

    SORRY MODEL IS A300.
    Upgraded/overlayed Vista to Windows 7 Professional and have found fingerprint scanner not working.
    Unable to remove program and wont accept fresh install of fingerprint scanner or even new fingerprint to be scanned. (Old Vista program working in background somehwere?)
    Is the fingerprint scanner which was installed under Vista now not compatible with WIndows 7.
    There seems to be no upgrades or downloads for Fingerprint Drivers for Windows 7 as yet.
    Message was edited by: lasdec1

    Hi mate
    To be honest I doubt that Win 7 drivers would be published for this oldie.
    I mean the Satellite Pro A30 is a older series and even Vista drivers were not published for this model row
    I searched on the Toshiba European driver page but I found only the W2k, Win XP drivers for this unit
    So if you want to use Win 7 on this notebook, then you need to collect the drivers at your own hand and this would be the same with the fingerprint reader. Maybe the driver designed and released for other series would work.
    It looks like Toshiba is in progress of driver release for different series you could take a look to the different series and could try the drivers.

  • Problems with disk drive assembly Satellite pro 4200

    I have problems with a Satellite pro 4200.
    The Notbook reads no more disks. The drive assembly I exchanged ready, however did not function. The drive assembly is addressed, but it is to be read not possible disks or formatted. Also a Bios update is not possible, since the drive assembly reads no more disks.
    cu
    Eltgen

    Hi Eltgen
    Sorry but it is not easy to say what the problem is on this way. If I understand you right you have built in a new FDD because old one was defective. Am I right?
    It will be interesting to know is the new one already used part. Maybe is the new one also defective. I hope that a small control light is on if you put the disk inside.

  • XSLT-Mapping for Genesys in combination with IC Webclient

    Hi,
    Im not sure if this is the correct area of the SDN but I dont know better
    I have the following problem:
    In the Account Identification Profile I can define an ApplicationID and an XSLT-File to transform my SOAP-request accordingly to search a Businesspartner by CAD (CallAttachedData).
    I used the sample program CRM_IC_BPIDENT_EXT_IAD_GENESYS and didnt change anything but whatever I send via the CCS there is no search done.
    Am I using the XSLT-program the wrong way in the meaning of "adapat it to your needs" or am I missing sth?
    Thanks for your help,
    Ben.

    Thanks for your reply.
    The code for the XSLT-File is as follows:
    <xsl:transform version="1.0"
    xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
    xmlns:sapxsl="http://www.sap.com/sapxsl"
    xmlns:asx="http://www.sap.com/abapxml" version="1.0"
    >
    <xsl:strip-space elements="*"/>
    <xsl:template match="Application">
    <asx:abap>
    <asx:values>
    <PartnerSearch>
    <xsl:for-each select="*">
    <item>
    <NAME><xsl:value-of select="name()"/></NAME>
    <VALUE><xsl:value-of select="."/></VALUE>
    </item>
    </xsl:for-each>
    </PartnerSearch>
    </asx:values>
    </asx:abap>
    </xsl:template>
    </xsl:transform>
    I cant tell if the output-format is correct as there is no error, at least I dont know where I could search for. There is no obvious errormessage at the IC client.
    The output looks like this:
    <?xml version="1.0" encoding="utf-8"?>
    DD42A914E95D02F1816A001E4F1CFA631b2591c:11abf6f5653:-
    7ffffalsetrueEnded4Not in process1826021068262601+07131355771671
    <asx:abap xmlns:asx="http://www.sap.com/abapxml">
    <asx:values>
    <PartnerSearch/>
    </asx:values>
    </asx:abap>
    <asx:abap xmlns:asx="http://www.sap.com/abapxml">
    <asx:values>
    <PartnerSearch>
    <item>
    <NAME>CURRENTCONTACT</NAME>
    <VALUE>GenesysContact</VALUE>
    </item>
    <item>
    <NAME>CURRENTCUSTOMER</NAME>
    <VALUE>GenesysCus</VALUE>
    </item>
    <item>
    <NAME>CURRENTCOMPONENT</NAME>
    <VALUE>GenesysComponent</VALUE>
    </item>
    <item>
    <NAME>BPCONFIRMED</NAME>
    <VALUE>G</VALUE>
    </item>
    </PartnerSearch>
    </asx:values>
    </asx:abap>
    <asx:abap xmlns:asx="http://www.sap.com/abapxml">
    <asx:values>
    <PartnerSearch>
    <item>
    <NAME>TargetName</NAME>
    <VALUE>826_group1</VALUE>
    </item>
    <item>
    <NAME>TargetType</NAME>
    <VALUE>2</VALUE>
    </item>
    </PartnerSearch>
    </asx:values>
    </asx:abap>
    <asx:abap xmlns:asx="http://www.sap.com/abapxml">
    <asx:values>
    <PartnerSearch>
    <item>
    <NAME>RTargetPlaceSelected</NAME>
    <VALUE>826PL_8263000</VALUE>
    </item>
    <item>
    <NAME>ServiceType</NAME>
    <VALUE>default</VALUE>
    </item>
    <item>
    <NAME>RTenant</NAME>
    <VALUE>Customers</VALUE>
    </item>
    <item>
    <NAME>RTargetTypeSelected</NAME>
    <VALUE>2</VALUE>
    </item>
    <item>
    <NAME>RTargetObjectSelected</NAME>
    <VALUE>826_group1</VALUE>
    </item>
    <item>
    <NAME>RRequestedSkillCombination</NAME>
    <VALUE></VALUE>
    </item>
    <item>
    <NAME>RTargetRuleSelected</NAME>
    <VALUE></VALUE>
    </item>
    <item>
    <NAME>RTargetRequested</NAME>
    <VALUE>826_group1</VALUE>
    </item>
    <item>
    <NAME>RStrategyName</NAME>
    <VALUE>826_RouteToAgent_SAP</VALUE>
    </item>
    <item>
    <NAME>CustomerSegment</NAME>
    <VALUE>default</VALUE>
    </item>
    <item>
    <NAME>PegAG826_group1</NAME>
    <VALUE>1</VALUE>
    </item>
    <item>
    <NAME>RTargetAgentSelected</NAME>
    <VALUE>AGENT03</VALUE>
    </item>
    <item>
    <NAME>ServiceObjective</NAME>
    <VALUE></VALUE>
    </item>
    <item>
    <NAME>gplus-analytics-id</NAME>
    <VALUE>1b2591c:11abf6f5653:-7fff</VALUE>
    </item>
    </PartnerSearch>
    </asx:values>
    </asx:abap>
    I modified the input so that there is a field "<item><name>POST_CODE1</name><value>9100</value></item>" which should be correct for searching but nothing happens.
    Does anybody know where I can see what SAP does with this information?
    Thanks for your help!!!!
    Regards,
    Ben.

  • Request for "WHERE  -   IN" Combination with Bind Variables.

    Hi,
    In ADF BC
    Im Creating the Bind Variables Searching methodolgy in ViewObject.
    SQL Editor:
    Query Like
    SELECT * FROM SEASON season WHERE season.MMYEAR IN (102007,112007) Here Done this query.
    In ViewObject Bind Variable Like B_MMYear .
    SQL Statement : SELECT season.Code,season.Location,season.MMYEAR FROM SEASON season already is there in SQL Statement in ViewObject
    Just im adding this conditon "WHERE season.MMYEAR IN (:B_MMYear)"
    after
    Drag&drop the ExecutewithParams form
    and im giving the MMYear like *102007,112008* then push ExecutewithParams....no Rows to Display...
    when im giving the only one vlaue like 102007 (Or ) 112007 then displays the suitable Row.
    how i can give the query Like "WHERE - IN" Combination in Bind Variables.
    Thanks,
    Rama.
    Edited by: user634195 on Oct 17, 2008 6:37 AM

    Thanks for rply Mr Timo.
    my BindVariable is not Numeric Type...it as a String. ok
    i already checks the debugging
    but i didn't get Exact Query
    query seems without Values same As SQL Statement in ViewOBject.
    like this
    SELECT season.Code,season.Location,season.MMYEAR FROM SEASON season WHERE season.MMYEAR IN (:B_MMYear)
    you Know...India Season of the Culture....
    see.
    In India Colture have Two Seasions
    1.Rabi.
    2.Kharif.
    example:
    Present Year : 2008 ok
    Rabi Season Strats from Oct2008 to March2009.
    Kharif Season Starts from Apr2008 to Sep2008.
    ok
    In my JSP Page one DropDown is there that is Season ok.
    when i select the Rabi....Then Rabi Months comes to page in CoreTable.
    i already done in DB:
    For Rabi:
    SELECT season.Code,season.Location,season.MMYEAR FROM SEASON season WHERE season.MMYEAR IN (10,11,12,01,02,03) done.
    For Kharif:
    SELECT season.Code,season.Location,season.MMYEAR FROM SEASON season WHERE season.MMYEAR IN (04,05,06,07,08,09) also done.
    the realtion b/w Bind Variable and Value....i think is somethink diff.
    Edited by: user634195 on Oct 17, 2008 7:50 AM

  • Which HAL for a msi 9141 with dual xeons?

    Hello im having trouble with my graphics card, a bfg 6800gt oc recieveing a code 12 error  ( cant find enough resources)   , they say the solution to my issue is to force a different HAL ( Hardware Abstraction Layer) So i can  Manually assign IRQ's  MS article Concerning HALs im not to keen on the idea but hey their they "experts" right .. Mind you the machine was working fine for 2 years. So my question is Which HAL to use.
    sys:
    XP Pro sp2
    MSI-9141
    2 Xeons @ 2.8 533 FSB
    4gigs pc2100
    bfg 6800 gt oc
    SB aud 2 Zs
    hard drives mouse the usuall.

    Ok i now have a fresh install of windowz and hte sound card pulled out. I have tryed switchin HAL to MPS PC no change. Reinstalled again w/format back to ACPI MPS PC. Tryed disabling HT no joy there either. I tryed to post some msinfo docs but i think i made the post to long cause i couldnt actually post it. I will work on making those available. Question. Is it ok for the Intel SM BUS  controller to share irq with graphx card. thats how it was for about 2 years already but so far i have not been able to assign irqs manually. COnflict an sharing msinfo32 follows
    System Information report written at: 12/02/05 17:10:09
    System Name: [Conflicts/Sharing]
    Resource   Device   
    I/O Port 0x00000000-0x00000CF7   PCI bus   
    I/O Port 0x00000000-0x00000CF7   Direct memory access controller   
    I/O Port 0x000003C0-0x000003DF   Intel(R) E7000 Series Processor to AGP Controller - 2552   
    I/O Port 0x000003C0-0x000003DF   VgaSave   
    IRQ 10   NVIDIA GeForce 6800 GT   
    IRQ 10   Intel(R) 82801DB/DBM SMBus Controller - 24C3    
    IRQ 18   Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7    
    IRQ 18   Intel(R) PRO/1000 MT Desktop Adapter   
    Memory Address 0xA0000-0xBFFFF   PCI bus   
    Memory Address 0xA0000-0xBFFFF   Intel(R) E7000 Series Processor to AGP Controller - 2552   
    Memory Address 0xA0000-0xBFFFF   VgaSave   
    I/O Port 0x000003B0-0x000003BB   Intel(R) E7000 Series Processor to AGP Controller - 2552   
    I/O Port 0x000003B0-0x000003BB   VgaSave   
    Memory Address 0xF8000000-0xFAFFFFFF   Intel(R) E7000 Series Processor to AGP Controller - 2552   
    Memory Address 0xF8000000-0xFAFFFFFF   NVIDIA GeForce 6800 GT   
    oh an isnt vgasave supposed to happen when the vid card doesnt pass?      
    thx again

  • Help for  bone tool combined with 3d tool

    hello to the forum
    im making a bone animating system in flash but then i want to give it a more vital animation by manipulating its z y x position how is it possible using the 3d tool?im doing everything needed but when i get to that point nothing seems to work,i dont get 3d tool options.
    thanks.

    thank u for ur reply,ill get to it and let u know if i managed to achieve my animation.
    best regards

  • Data Recovery Tip For Boot Camp Users with Damaged OSX Disk

    My iMac suddenly stopped booting (endless gear on white load screen).
    It won't target mode. Disk Repair fails. It wont safe boot.
    However, it does have a Windows Boot Camp partition.
    I was able to use HFSExplorer (a free 3rd party app) to mount my OSX drive inside windows (when it wouldn't mount on my macbook connected by firewire - even though it could see the device). I then saved a load of data I hadn't yet backed up.
    This method saved me a lot of stress, so I was hoping it could help someone else out.
    BTW I'm about to do a fresh install of OSX as I can't get it to boot.
    1. This will not affect my (still functioning) Windows partition, will it?
    2. Is there anything else I can try to get it to boot right? There's 3-4 "red" errors on disk repair and it says it can't fix them.

    If you are able to access the Mac OS X volume then you should be able to install a fresh Leopard. First I would erase the volume and zero out the data if Disk Utility will do it before the install. What I am afraid will happen is that DU will tell you that it cannot unmount the volume to do the erase. If so, a new version of Leopard may still have issues.
    Dah•veed

  • Combination with Sata HDD and Pata HDD

    I am using 1x Sata HDD and 1x Pata HDD, The problem is when I want to install fresh install of windows XP, the setup identify as my disk 1 is the Pata HDD  (partition C and D) and disk 2 is the Sata HDD (E and F), I want to install the windows on the Sata HDD so I want it to become (C and D) as disk 1.
    I found a solution by removing the power cable from the Pata HDD and then the installtion identifies the sata hdd as C and D/ disk1, but I need a solution without have to unplug the pata power cable.
    thx

    Windows will not let you change the drive letter where the "Windows" folder is. This is because critical files are linked to the registry when you install programs in the Program Files folder after a normal install.
    For a fresh install the best solution you have is to install Windows with only the SATA drive installed and no other drives. Then when you are sure you only have one drive in the computer you need to repartition the SATA drive into the two sizes you want during the CD install of XP. During the XP install choose one of the partitions (preferably the first) beginning at 0 on the disk. Windows will just leave the other partition alone until after you are done installing XP. Then go into the disk manager after Windows is setup and enable the orphaned second partition you created earlier in Windows setup (Windows will not initialize it automatically). That one will be D:\. Then intall the other drive(s) in whatever order or creation you see fit. Only then can you change those drive letters (partitions). Feel free to experiment and by the way you may need Partition Magic to do a bit of house keeping seeing how you have so many partitions.

Maybe you are looking for