Recovery CD-ROM for Portege 3500 doesn't work!

I have Portege 3500 tablet-pc and the Recovery-cd doesn't work.
I followed the instructions but nothing happened that my windows start again!!
Can you tell me please how i can recover my notebook?
Thank you

Hi
As far as I know the Portg 3500 dose not support any internal CD/DVD drives.
Did you use an supported and compatible external drive to boot from the CD?

Similar Messages

External DvD-rom for Portege 3500

I recently acquired a Portege 3500 as well as a Toshiba external DVD-ROM (model No. PA3246U-1DVD). As I attempt to find drivers for this I have failed horribly (for the dvd-rom). It is connected via a Card Bus card. Toshiba says the drivers should be part of Windows but my system cannot find them. I was wondering if anyone here had drivers for the Portege 3500 for this. If I'm not mistaken they should be for PCMCIA adapters. Any help on this would be greatly appreciated.
*Side note: Retailers say the Toshiba external DVD-ROMs ships with cd contain both manual and drivers. If anyone has a copy or could point me to a site with them it would be greatly appreciated as well.

mostly the external DVD-drives are made by freecom
you can find the freecom cardbus driver for your 3500 here :
http://support.toshiba-tro.de/tools/portege/p3500/win-xp-tbe/cardbus-drv/cb-drv-p3500-xp-tbe-5135661-en.zip
if you need additional drivers you can find and download them at the freecom website ( www.freecom.com )

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

http://support.apple.com/kb/TS2005
http://support.apple.com/kb/HT1861
https://ssl.apple.com/support/proapps/serialnumbers/

Question '''OS Win2000''' using '''FireFox 5.01 - portable''' Problem: '''Plug-in for Windows-Mediaplayer doesn't work

'''OS Win2000'''
using '''FireFox 5.01 - portable'''
Problem:
'''Plug-in for Windows-Mediaplayer doesn't work '''
cause: presumably - Win2000 only copes with WMP 9.0
Your FF 5.01-portable works only for WMP 12 (??)
I have no problems with WMP when I use my regular FF 3.6 on this old Win2000. - WMP - Plug-in of FF3.6 works perfectly on my Win2000
'''question:'''
What can I do to get WMP running on my Win2000 using FF5.01-portable ?''''''

See the Portable Firefox support forum for help with that. <br />
http://portableapps.com/forums/support/firefox_portable

TA44597 I'm trying to put playlist onto cd. My computer has built in cd rom/dvd player that doesn't work, I purchased an external dvd rom which plugs into my computer via usb. iTunes recognises when I have inserted a cd to play but will not burn to it.

I'm trying to put playlist onto cd. My computer has built in cd rom/dvd player that doesn't work, I purchased an external dvd rom which plugs into my computer via usb. iTunes recognises when I have inserted a cd to play but will not burn to it. help!

Portsian wrote:
I'm trying to put playlist onto cd. My computer has built in cd rom/dvd player that doesn't work, I purchased an external dvd rom which plugs into my computer via usb.
Is it also a CD/DVD burner? Or is it kjust a CD/DVD player?

My iphone keeps blocking in a "boot" mode... blackscreen with apple logo... the restarting (home and power button for 10 sec) doesn't work.

my iphone keeps blocking in a "boot" mode... blackscreen with apple logo... the restarting (home and power button for 10 sec) doesn't work. when i get it in DFU mode and try restoring with itunes it remains the same... provider already "fixed" this problem twice with a "software update" only to get the same problem again... it just "reboots" this time it happened @ night while charging... previous time in my jacket pocket... this is the 3th time it happens, and my provider (Mobistar belgium) doesn't wish to exchange or refund my iphone witch clearly has something wrong 3 times same problem in 3 months...

imanfromsweden wrote:
Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
Please help....
On belhalf of my fellow volunteers, the answer is, "We'll try our best."
My advice is to try not to treat this like it is a paid service provided by compensated professionals. Ask nicely and one of the nice folks here might take some time out of their weekend to offer advice.

My charger for ipad air doesn't work.Can I use charger 10w without any worreies?

My charger for ipad air doesn't work.Can I use charger 10w without any worreies(damage battery)?Is it possible to change in apple store with warranty?

"Can I use charger 10w without any worreies(damage battery)?"
Yes you can.
"Is it possible to change in apple store with warranty?"
If you mean "can I get my power adapter replaced under warranty, at the Apple store?", yes.

USB recovery media from Toshiba for Windows 7 doesn´t work

Hi,
Recently as my laptop Potégé was slow I reinstalled Windows without using Toshiba recovery disks. Now I can't activate Windows 7 (64 bits), so I ordered a USB recovery media from Toshiba. I tried to use it but it doesn't work. I turn off the laptop, turn it on again pressing F12, -with the USB plugged to the laptop- and when I press HDD recovery, the system just takes me to Windows as usual, without reinstalling. Any thoughts on how to reinstall?
Solved!
Go to Solution.

Hi,
Are you getting a boot option menu when you press f12? Have you tried going into BIOS to check your boot order? Usually f2 or DEL will get you to BIOS, or at the bottom of the boot option menu (which I assume is f12). Once you are in BIOS, check that your USB drive is above the others in the boot order and save your configuration and reboot. If you are still having a problem, you might check to see how many USB devices you have plugged in, or chained, and remove the ones that are not necessary because they could interfere with booting to your USB drive. If you are using a USB hub, you might try putting the usb key into a different slot to give it priority over the other USB devices on boot up. The highest priority slot on a USB hub might be the one closest to the USB cable that plugs in to your laptop's USB port.

My iPod 5 shut down and hasn't turned back on (this isn't the first time it happened) I've read to put it in recovery mode but my home button doesn't work, how can I fix it?

ipod 5, had it for about 2-3 years, constantly shuts downs for about 12 hours but this time it hasn't turned on for a whole day, and my home button doesn't work which occurred a long time ago.

Try this previous discussion:
Turn on without Home/Power Button

Citrix Receiver - AppWorld says for Classic but doesn't work

(Posted this in the other forum for downloaded apps, reposting here since I seemed to have posted in the wrong forum.)
http://appworld.blackberry.com/webstore/content/34621918/?lang=en
Something wrong with the compatibility? Website says compatible with Classic when you mouse over Supported Devices, but when I load it on the device it doesn't work.
Sideloading from Citrix doesn't work either, it says the app has been replaced and told me to redownload from World.

Citrix themselves provided a BAR file. I used BB10 App Manager via Dev mode.
http://www.citrix.com/downloads/citrix-receiver/other-platforms/receiver-for-blackberry10.html

Bought game for BB, but doesn't work

I bought a game on Bplay, and have received 2 mails on my computer about the purchasing. So I had to forward the mail to my phone, and open the link that was in the mail, when I open it on my phone it says:
"Not Available on DesktopNot Available on Desktop
Please visit this URL with your BlackBerry device. If you are on your device and believe you arrived here in error, please follow the directions below to ensure you are using the correct browser.
Push the BlackBerry button (or track-wheel for those without a BlackBerry button) to bring up the menu. Select options.
Select General Properties.
Make sure your default browser is: Internet Browser
Exit out of General Properties and enter Browser Configuration.
Scroll down to Emulation Mode / Browser Identification and make sure it is set to BlackBerry."
If I change the things and try it again, it doesn't work again. I payed 9.99 dollar for this, that's not a problem at all, but I really want this game.
Can someone please help me?
My pin is: 255CD889
I almost always respond immediatly and otherwise I'm sleeping and reply when I wake up
Hope someone can help me!
thanks

dzero wrote:
huh so i payed for nothing?
first i couldnt download it and a day later they say its valid
it doesnt work, what you told me on bb messenger.
what can i do?
again go to https://www.bplay.com/purchases/regen.php enter your email address you used for purchase you will get a email with a link go to the link in the email and will take you to a page that shows ALL your past purchases... Click on the resend download link for this game and will then email you a new link to download the game click on that link on your Blackberry.

How can I get Firefox version 5? I use an application for banking that doesn't work with version 6 yet.

I am using an application for banking with Bank of America that doesn't work with Firefox 6 so I need to install Firefox 5 until Bank of America can update their app to work with Firefox 6. Can you tell me how to find the download for Firefox 5?
Thank you

I have an old iPhoto version and it still works with Mavericks, the version before yours, that is puzzling.

TS3989 'Options' button for Photo Stream doesn't work?

When I go to Photo Stream, it says I'm not signed in. The resolution says to select Photo Stream and click Options, but nothing happens when I do so. Why won't the Options button work and what can I do?

I followed your advise, but it doesn't work. Photos made with iPad works now (after putting all photo stream on and off), but iPhone 4 is not photostreaming at all (also not after redoing what you advised), also iPad photo does not appear on iPhone 4.
Strange is that i see two icloud photostream albums in Photo application (both (staying) empty). I can imagine there is a conflict with the two icloud accounts (i first used apple id for buying in itunes (hoped to merge) and than rethought and activated icloud (mobileMe) account instead. Could that be the problem? And how to get rid of that (restarting iPhone didn't work, a reset I am not fond of, nore a restore.
Who knows the answer?

Adobe reader for Nokia 6680 doesn't work on my Nokia 6670

I downoladed adobe reader for Nokia6680. I installed it on my Nokia6670, it prompted no error meesage, but it is not visible on my phone menu. Why, given that same OS and same screen, the reader for 6680 doesn't work on 6670?

Use the Nokia 6670 bundled NetFront web browser to enable you browse pdf document, but the speed is very slow and the character rendering is not good.

Workaround for browse which doesn't work upon login

I've seen this post here before that the browse feature doesn't work when you first launch the web player in Windows. I use the web player with Spotify Unlimited on a laptop running Windows 7. I seem to get a new release nearly every day, and this problem persisits. So what you can do is launch the application, log in, close the application, (you won't be able to log out and it won't matter anyway). Then wait a few minutes or you'll get the dialog box The spotify application is not responding. Then re-launch Spotify and the browse feature will work.

Hi Rick -
I do not have multiple versions of RoboHelp installed on my machine. The browse sequence worked with a new project, but it won't work with my established project (which has "exclude" conditional tags for some topics in several folders and some folders that are excluded all together). I do have more than one window definition, but the only one that is used is the "secondary" window. I attempted to enable browse sequence for both (main and secondary), but it still would not work. My primary layout is Microsoft HTML Help. The project is NOT in source control. I inherited the project, which had multiple tech writers building it since 2002. Also, since attempting to enable a browse sequence, the project opens very, very slowly. So I removed the browse sequence and performance increase somewhat, but it takes a long time to open. The project is not that large - 900 topics. Any additional thoughts . . .
Regards,
Denise
Date: Thu, 2 Jul 2009 07:04:09 -0600
From: [email protected]
To: [email protected]
Subject: Browse sequence doesn't work in project
Hello again
By chance do you have multiple versions of RoboHelp installed? I do and I'm unable to coax the Browse Sequence bar into a CHM I compile using RoboHelp 8.
You may be onto a bug. I'd strongly encourage you to report as same to Adobe. (Link is in my sig line)
A parting question here. Does it show if you create a new project?
Ohhh, and another question or two just popped in.
Do you have more than one Window definition?
Is your primary layout configured to be Microsoft HTML Help?
Cheers... Rick
| http://www.robowizard.com/pc.gif | Helpful and Handy Links
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
http://www.gooberguides.com/ProductPages/RoboHelp/RoboHelp72Day.htm
http://www.ShowMeSolutions.biz
http://sorcererstone.wordpress.com/
http://www.gooberguides.com |
>

Recovery CD-ROM for Portege 3500 doesn't work!

Similar Messages

Maybe you are looking for