Recovery disc failure

I have the recovery disk i purchased for my dv6-3120us laptop and a new harddrive. The disc reformats and goes through the processes and does take a long time. then it says recovery failed and gives me 3 options save - details - retry. i have retried i looked a the details. i will have to look at the details again. to do this i had to put the other drive back in. this is a 500 gb and the new drive is a 1tb. i hope that is not the problem...   just need some advise  thanks  ....

Hi,

Similar Messages

  • Recovery Disc Failure after Hard Drive replace of a DV7 series notebook

    I have a HP Pavilion dv7-4270us with Windows 7 64 bit and recently got a message on bootup stating that the SMART system of my Hard Drive has failed. I purchased a Momentus XT Hybrid drive. I purchased the Recovery discs, since I neglected to follow my own advice and didn't make a set. Replaced the Hard Drive, and started the Recovery process, after the Application disc, the system said Finished, Clicked on the button, the system shutdown. Turned the power back on, Recovery took over for a couple of minutes stating that it was copying some files, a couple of minutes later it claimed that it was finished asking me to click finished. After I did so, the system rebooted hanging on the HP logo screen with the statement in the lower left corner stating "Press ESC for the Startup Menu". My only recourse has been to power down machine. When I restart the computer I get the message "Bootmgr missing".
    I have already poured through the forums and tried downloading the Windows 7 Home Premium 64 bit DVD from Digital Life. As it begins the Install it states that a driver is missing, I have poured through the drivers for this computer and don't see anything for SATA, and none of the others would be needed for bootup. I have been successful in loading my Windows 7 Professional on the system, but since I don't have an extra key code for Professional lying around, it isn't helping right now.
    I have also attempted to partition the new drive manually using my desktop and a device allowing me to see the drive using a USB port, but it did not go right. The good news is that the old drive is still working to a point. I can read it through the USB port, and I can back-up the drive, except for the Recovery partition. But when I put the new drive in and setup the partitions similar to the original drive, it still does not boot.
    I have attempted many other things all to utter failure, I am not used to failing when it comes to computers, so be gentle.
    This question was solved.
    View Solution.

    Hi:
    The missing driver is due to either a bad burn or use a different brand DVD. You have to burn the ISO file at the slowest possible speed you can.
    Also, double check the file size of the ISO you downloaded. Sometimes you don't get the full 3.xx GB even though the download says completed.
    If you have a 4GB or larger USB flash drive you can install W7 that way.
    Just follow these instructions...
    Download the MS W7 USB installation tool, and read the instructions on the page for use.
    http://www.microsoftstore.com/store/msstore/html/p​bPage.Help_Win7_usbdvd_dwnTool
    You may also need to do this mod like I did if the flash tool errors out.
    Download the bootsect file form http://www.everettsporting.com/bootsect.zip
    You will need to go to the control panel, select the large icon view, go to the folder options icon, View tab, and select the show hidden files and folders option.
    Once downloaded, copy the BootSect.exe file to the same folder that includes the installed Windows7-USB-DVD-Download-Tool.exe file. The default install directory of that file in Windows 7 is C:\Users\USERNAME\AppData\Local\Apps\Windows 7 USB DVD Download Tool\
    Run the Windows 7 USB/DVD Download Tool application as indicated on the Microsoft Store web site. The end result will give you a bootable USB flash drive that contains everything you need to install the 64-bit version of Windows 7.
    Paul

  • HP recovery disc failure with the following error message

    Notebook:
    HP Pavilion g7-1070us
    OS: Window 7 home premium 64-bit
    Problem:
    Notebook failed to start. Bought recovery disc set from HP and tried to do the factory restore (Factory image recovery)
    The first two steps went smoothly:
    1) "Reformatting the window partition of the ard drive;"
    2) "Copying files required to restore the hard-drive;"
    But at step 3: "Restoring files to the hard-drive", when the progress bar showed 46%, it got stuck and the following  error message popped up:
    Copy File Fails
    From: E:/PRELOAD/BASE3.SWM
    To: C:/RM/Image/BASE3.SWM
    I tried a few times and every time it got stuck at exactly the same point.
    PLease help!!!! Thanks a lot!!

    Hi,
    Assuming this is just a problem with the recovery media, here's an alternative option you could try.
    Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
    An example of a COA Label can be seen Here.
    You can create an installation disc yourself using another PC - just download the correct Disc Image ( this must be the exact same version that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  These Images are clean and from a well-respected source, however there are only limited versions available.
    Windows-7 sp1-iso-official-32-bit-and-64-bit
    Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
    http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
    Any additional drivers and software you may need can be found Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Compac presario C700 recovery discs failure

    My Compac Presario froze, I closed it and then it would not start.  I managed to get onto restore facility but it would not work and ultimately I got out my 3 recovery discs.  The first 2 ran successfully but the third only goes to 18% and stops.  This means I cannot use the computer.  I really would appreciate any help on this.  Thanks

    Hello @yorkshirelad ,
    Thanks for posting on the HP Forums!
    I understand you are experiencing an issue with your notebook. However, since this is a commercial notebook, you should post your issue on the notebook board of the HP Enterprise Forums for a better answer.
    Have a wonderful day!
    Mario
    I worked on behalf of HP.

  • TouchSmart tx2-1370us Recovery Disc Set Failure

    I am posting on behalf of my sister.  Here is her story:
    Her TouchSmart tx2-1370us notebook's screen broke a while back.  It was under warranty from where she bought it from so it was sent off to be repaired.  When it came back the screen was fixed but there was a note stating they had lost her Windows 7.  The computer loaded and ran perfectly fine but it had the 'this is not a genuine copy of windows' pop-up.  She claims she was unable to read the product key sticker under the computer good enough to get it to accept anything she entered.  When she called the store, they told her HP would be able to help recover it.  HP sold her recovery discs that were supposed to restore the computer.  It is a 3-disc set, 2 labeled System Recovery DVD Windows 7 Home Premium and 1 supplemental CD labeled Application & Driver Recovery CD.  The CDs were ran multiple times always coming up as unsuccessful after the first 2 CDs.  I won't get into her customer support experience but she claims she spoke on the phone with HP 6 times over the course of a week and nothing they had to say or offer helped.  Always unsuccessful recovery message.  She gave up, almost crying at this point, and I said I'd try.
    After a little searching I found a patch on HP's web site which would supposedly fix the recovery discs issue.  The patch was installed correctly, green checkmark and all, and all 3 CDs ran through successfully.  The computer rebooted and the HP Software Installation screen ran for a while before another restart then the usual recovery unsuccessful message.  I tried it plenty of times with the same result everytime.  I saved the log from the last go at it and will post it below.  It appears the BIOS states Vista as the OS but she bought the computer pre-loaded with Windows 7.  Could there be something in that fact causing an issue?
    Someone suggested to reset the BIOS to factory defaults but that didn't work either.
    When saving the log to USB I could see all the files, there's 3 drives listed SDV(C Local Disk(D & BOOT(X
    Any help or suggestions would be appreciated.
    Here is the log:
    [ 2:30:01.41] Entering Checking OS Edition...
    [ 2:30:01.41] Check RStone.ini file to determine the requried edition.
    [ 2:30:01.44] Exiting Checking OS Edition...
    [ 2:30:01.46] Check if Upgrading Win 7 is required.  
    [ 2:30:01.47] Current Edition is [HomeBasic]...
    [ 2:30:01.47] Required [Starter]. Don't need to upgrade...
    [ 2:30:01.47] Required [Starter] ...
    [ 2:30:05.17] Required [Starter] Edition. But, OS is not [Starter]...
    [ 2:30:05.17] Upgrading OS edition might have some problem...
    Deployment Image Servicing and Management tool
    Version: 6.1.7600.16385
    Image Version: 6.1.7600.16385
    Current edition is:
    Current Edition : HomeBasic
    The operation completed successfully.
    Component: TDC Preinstall Diagnostic Tools for Windows 7 - TDC
    Error found: You have set Vista Flag on a Win 7 image, please use EEPROM to set ~OS SKU~ value = 2
    [ 2:38:37.07] --------------------------------------------------​----------------------------------------
    ***Factory Update Failure !! ***
    [ 2:38:37.07] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
    [ 2:38:37.07] --------------------------------------------------​----------------------------------------
    [ 2:29:20.80] Start BBOffline.cmd...
    UPDrv=[C:]
    [ 2:29:21.35] Set UIA Error Code to 951
    [ 2:29:21.68] Starts [FixUps].
    [ 2:29:21.68] --------------------------------------------------​-------------------
    [ 2:29:21.68] FixUps.cmd...
    [ 2:29:21.68] create overall progress info...
    [ 2:29:21.72] FixUps.cmd completed...
    [ 2:29:21.72] --------------------------------------------------​-------------------
    [ 2:29:21.72] Starts [Tweaks for SSRD].
    [ 2:29:21.72] --------------------------------------------------​-------------------
    [ 2:29:21.72] SSRD Tweaks to change user default locale...
    [ 2:29:21.72] Copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES.DLL.
    [ 2:29:21.76] Run "IntlCfg.exe -skudefaults:en-US -image:C:".
    [ 2:29:27.64] --------------------------------------------------​-------------------
    [ 2:29:27.64] Starts [Sleep 10 sec].
    [ 2:29:37.68] Starts [Create RStoneFUpdate.INI].
    [ 2:29:47.78] Starts [create 1GB Pagefile for offline].
     Volume in drive C has no label.
     Volume Serial Number is 60E6-4F60
     Directory of C:\system.sav\bbv
    01/01/2001  02:29 AM     1,073,741,824 pagefile.sys
                   1 File(s)  1,073,741,824 bytes
                   0 Dir(s)  26,019,311,616 bytes free
    [ 2:29:47.85] Launch PININST.exe for Offline ...
    [ 2:30:13.27] Start SysID Check...
    [ 2:30:16.34] Start Option Code Checks...
    [ 2:30:18.37] Start PIN Tweaks...
    [ 2:30:19.44] --------------------------------------------------​-------------------
    [ 2:30:19.44] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
    [ 2:30:19.44] Update PININST_BBV.ini ...
    [ 2:30:19.46] Update PININST_BBV2.ini ...
    [ 2:30:19.48] Update PININST_BBV2POST.INI ...
    [ 2:30:19.49] Update PININST_BBVClean.INI ...
    [ 2:30:19.52] --------------------------------------------------​-------------------
    [ 2:30:20.40] Start Factory Update(s)...
    [ 2:30:27.43] Start QFE Offline installation...
    [ 2:38:36.81] PININST_OFF: PASSED...
    [ 2:38:36.91] Type C:\System.sav\Logs\BBFindEr.log...
    [ 2:38:36.93] Type C:\System.sav\Logs\BBFindE0.log...
    ---------- C:\SYSTEM.SAV\LOGS\BBFIND4QFE.LOG
    [ 2:38:36.93] Check FUList.log if there is duplicate Desc...
    No duplication.
    [ 2:38:37.05] No Duplicated Desc is found... PASSED.
    [ 2:38:37.05] There was no Factory Update...
    This question was solved.
    View Solution.

    Lets take a chance it is for W7
    go here and download the correct version of W7 (home or pro, they don't have a starter edition), bit version 32 or 64, and language, it will be a very large iso file, once downloaded, burn it to a DVD+R blank disc as an Image, this can be done on a Windows 7 PC, by right clicking on the iso file and select "open with" > "windows disc image burner"
    http://www.mydigitallife.info/official-windows-7-s​p1-iso-from-digital-river/
    This will make a regular windows 7 install disc you can use to get Windows installed, use the key to see if it will activate.
    Then you will have to download drivers for your particular model from the HP site and install.
    http://h10025.www1.hp.com/ewfrf/wc/product?product​=4041813&lc=en&cc=us&dlc=en&task=&lang=en&cc=us

  • Satellite Pro M40 hard drive failure - Recovery disc on new drive?

    Hi
    My Satellite Pro M40 hard disk has died and I want to install a new drive. Unfortunately my old drive is 60Gig and the Toshiba parts website has only 40 Gig or 80 Gig drives.
    Will I encounter any problems with the recovery disc if the hard drive is not exactly the same?
    Your advice would be appreciated.
    C

    No, there shouldnt be any problem with the Toshiba recovery CD.
    On the recovery CD you will find a Windows OS, Toshiba drivers and utilities and additional software.
    These whole applications are packed in image files.
    You should only be sure that the HDD is compatible with your notebook and will be recognized in the BIOS.
    Then just simply boot from the recovery CD and the installation should start.

  • Questions RE: Using System Recovery Discs on HP G71-358NR (Options?)

    I bought my HP G71-358NR Notebook in Dec 2009. It has Windows 7 Home Premium x32/x64 ). I am on my second hard drive (had to replace in Feb 2012), and I do have the HP System Recovery DVDs (there are 2 of them), and the HP Driver Recovery CD (1 disc).
    Short version (my actual question) - obviously I did a "clean re-install" the first time, since it was a brand-new hard disk, so everything on the Recovery Discs was used, and I don't remember exactly what happened during the install. But is there a way to do a "short version" - re-installing JUST the Windows OS (or "repairing" just that) - so that I don't have to also re-install everything already on my laptop (which all seems to be working fine - the only thing is I can't do the Windows/MS security updates, or any of their updates at all - but everything else seems to be working as normal - I did get my HP Support Assistant back, which runs and always tells me there are no problems to report). I don't remember if the Recovery discs ask you if you want to "ire-nstall or repair only the OS" or "do an entire, clean re-install" or not.
    Here's the long version - as to what happened - in case anyone cares to read it - because it may give some insight, and since it involves 3 original HP software programs being "Uninstalled" - even though the HP Support Asst. is now back and seemingly running, maybe my problem stems from one of the other 2, and there IS something simpler I can do to fix this - I will tell you what I found that is "now wrong" in my laptop, how it got that way, and what I've already tried, obviously to no avail): 
    About 2 months ago my niece's boyfriend decided to "help me out" and make my computer faster, by looking at things - he looked at my programs, and for some of them he would ask me what it was and/or if I used them at all. He did not bother to ask me about the HP ones (which, up to this point, I had not removed because I did actually like them and find them useful - I had no idea he wouldn't ask me about them first, before arbitrarily uninstalling them). I wasn't exactly sure what he deleted at first (as I was busy chatting with my niece and sister). Right before he "cleaned things up," he also installed a new keyboard and screen. I dropped my laptop on cement a few weeks prior, and the screen broke (it was "blank" when I turned the laptop on, and completely unuseable). Also, I had gotten water in a few of the keys approx. 1-1/2 yrs ago, so a few keys didn't work right, so for any "major" writing, I used a wireless keyboard - so I figured that since I had to replace the screen I may as well also buy the keyboard to replace at the same time.
    Everything worked fine after he replaced the screen and keyboard - I used my laptop for a few hours afterword, then turned it off. Before it turned off, it installed 28 updates (there were so many because I had not used my laptop for about 2-3 weeks, from the time my screen broke until I got it replaced). The next day it was working fine, but suddenly I was getting the message that I needed to Activate my Windows 7 Home Premium (that I may be using a "pirated" version, etc.). In trying to figure out what happened, I noticed that he "Uninstalled" 3 HP programs/software. The reason I know exactly which ones is because I decided to just do a "System Restore" to the time right before he messed around with things. At some point in my "looking around" in my laptop, I noticed that the BIOS wasn't right - I don't know a whole lot about it, so I rarely go in there, but I did notice one thing - that a lot of information was "missing" - info I KNOW should have SOMETHING there. When I ran the restore from the function key (F10?) I think it worked the first time - I believe that may be how I got my HP Support Assistant back - but when I tried it again a week or two later, it kept running the same 2 things (the "hard disk scan" and something else, I can't remember off-hand) over and over and over - each time saying that there were no problems. 
    The 3 he "Uninstalled" each had a "Restore Point" (I'm not sure if he put them there, of if HP automatically does it, as a "precaution"). The 3 are: 1) HP Setup, 2) HP Update and 3) HP Quick Launch Buttons. I tried using the System Restore several times - each time, it went through all the motions, but at the last step, when it "restarts" the laptop, it restarts and I get the message that "the System Restore was NOT successful," etc. And it tells you to try turning off your antivirus, etc. I did whatever it says to do, and it kept being "unsuccessful."  I tried (again, several times) putting in my Product Key - which I KNOW for a fact is correct - but MS won't accept it. I cannot make out about 3-4 digits/characters of the COA - it's on the bottom of my laptop and they are "worn" to the point that I'm not sure exactly what they are (just those 3-4 ones, the rest I can read). I now know that there is a difference between the OEM-SLP and the COA-SLP keys (which I DO have a copy of the OEM-SLP key, from running a Belarc Advisor shortly after receiving my new laptop - mistakenly thinking that that was the only "Product Key" I ever needed - I was not aware of the COA-SLP, or the importance of saving it somewhere, until just recently, after all this happened). I don't really want to "change the Product Key" to the COA-SLP one, anyway, because during my research, I found one website that said:
    “COA SLP: This is the Product key that you see on the sticker on the side or bottom of your computer. It is a valid product key, BUT SHOULD ONLY BE USED IN LIMITED SITUATIONS (such as if the OEM SLP key stops self-activating for whatever reason). The key must be activated by Phone. (Note: All manufacturers that use the OEM SLP system are required by contract to include a Certificate of Authenticity (COA) sticker, that has a COA SLP key, on the computer.”
    (Note, other than those 3-4 digits/characters of the COA-SLP key, I can read everything else - Model #, Serial #, etc. - nothing else seems to have rubbed-off)I have been troubleshooting (researching and), ever since this happened approx 2 months ago. I have run the MS Genuine Advantage Tool (have the printout), ran the "scannow" (whose results said, “Windows Resource Protection did not find any integrity  violations.” - ? Go figure), and even one solution that said to "Rebuild the license store" - which again did absolutely nothing. I have tried every "fix" except reinstalling via my Recovery Discs. At some point I became suspicious that my problem, was, in fact, due to him uninstalling any or all of those 3 HP programs. Then I found an answer to just about my same exact problem on an MS Windows troubleshooting page - they said:
    “the HP OEM OS requires information in the HP motherboard to cause the OS to activate”
    then it also listed WHY - it gave a couple examples from what the person's "Microsoft Genuine Advantage Diagnostic Tool" printout says - and those examples/results are EXACTLY what my printout says.
    So I'm concerned that one of those HP programs contained information crucial - that communicates with BIOS/Motherboard, and tells them that my Windows 7 Home Premium x64 not only exists on this laptop, but is also LEGAL. If that's correct, is there a way to remedy it (and putting back those programs/software) via the HP website, without having to do a clean re-install and lose everything? Again - don't forget, the System Restore won't work, either (which I assume has something to do with the BIOS info being gone?)

    If your BIOS is missing critical info which id's it as an HP machine, such as model,serial,etc it usually requires service from HP to correct it. I will try a contact I have to see if he can help. He stays quite busy so it may take a few days before I know anything.
    The fact that your Windows is requiring activation would cause the failure of Windows updates, etc since MS thinks you re running pirated software. The info in BIOS is what defines whether or not you are legally running OEM Windows. This is when the COA license would help, since it would replace the OEM key used to install at the factory -which "appears" to be running illegally now if pertinent info is missing in BIOS.
    I have seen it suggested that sometimes you can make out all of the numbers by focusing a bright flashlight on the COA label
    Removing the HP software you mentioned should not have any affect on BIOS info. However you can install/reinstall most software/drivers from your Support page:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4080...
    OR-by using Recovery Manager-Reinstalling Drivers/Software>> Windows 7
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Installed new hard drive ran hp recovery disc's- get error code

    I am reinstalling xp on a new hard drive and I get this message stop: 0x0000007b?
    reinstalling xp and I get this message stop: 0x0000007b (oxf9e53524,0xc0000034,0x00000000,0x0000… It is on an hp dv5000 running windows xp professional! I have an old hard drive and it still works but since it says failure is innement I decided to get a new hard drive and when I used the recovery disc's on the new hard drive, i got the message above!
    The weird thing is that I can put my old hard drive back into the laptop and it works fine but still about to fail! I also have an xp disc that my friend had so CAN I use it instead and  would it fix my problem or not? The disc says this on it!
    operating system cd microsoft windows xp home sp2 (contains software and drivers already installed. for software reinstallation and repair only) 
    (Please note: the software on this cd is already installed. store in a safe place and refer to your user documentation if you need to reinstall or repair your system software. for distribution with new hp or compaq pc) 
    ok there is only one disc and it is black and white ! Is this an actual windows xp disc that can be used on any hp that has had xp on it or what? 
    can I just install this cd and start from scratch or is it the same as my recovery discs? 
    I dont know how to boot into the menu and all that stuff so please be detailed if you can help me! I really appreciate any help! thanks 

    No, recovery discs are particular to each PC make and model.
    I would try cloning the old hard drive to the new one using this software
    http://www.todo-backup.com/products/home/free-backup-software.htm
    Clone How to
    http://www.todo-backup.com/products/features/disk-clone-guide.htm
    You can order recovery media here
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
    If HP no longer has Recovery Media for your model, order them here
    http://www.computersurgeons.com/Default.aspx

  • Error when create a set of recovery disc . In HP Pavilion G6-2103TU Laptop

    Dear friends.
                  when i create a set of  recovery disc in DVD-R.Error  occur (we are experiencing errors in recovery media  creation.tray again ).  Two  disc already create at 3rd disc  this problem facing.helps me.
    jyoti prakash
    Jyoti prakash

    Phone your local HP Support and tell them about the failure. Sometimes you can get a set sent out free of charge. If not there should only be a small charge. Choose your country here to get the number>>
    Contact HP
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Very Confused over Reinstall Discs, Recovery Discs and how do I CREATE THEM!

    I am the owner of a Lenova IdeaCenter K300 Computer with Windows 7 64Bit OS
    The system has been running for just about a year now...no issues, very stable...however after a recent issue with another computer MFG system...I have questions:
    First the Other MFG system - The computer was purchased in April of 2008 with Windows Vista, the computer was unplugged on November 1, 2008 and stored in a cool Dry place....In October of 2011 My Godson wanted a new computer and I told him I have a computer that was lightly used and would do what he wanted it to do.
    I plugged in a monitor, keyboard, mouse, and turned on the unit when MUCH to my surprise the HD had failed...BADLY...so I went to a local store, purchased a new HD and installed it on the machine. 
    First let me explain that this computer MFG after several calls to them looking for help.. explained to me the following
    1: Reinstall Discs were NOT avail
    2: The System did not support creating Recovery discs since all the information that the system needed was stored on
        the Hard Drive that was supplied with the system...and that the OEM Windows VISTA version was available to use for
        3 years
    I said Okay, but I have a computer that had a HD failure so how do I go about reinstalling Windows Vista to get the computer up and running again?  They told me that I had to PURCHASE from a store a copy of Windows Vista.   I said that I had from two other computers from another MFG Windows Vista Reinstall Discs, can I use those, and use the Product Key code supplied by YOUR company to reintsall the OS?  They said NO...you need the orginal Hard Drive....I was like WHAT!
    Needless to say you can imagine my EXTREME frustration over not being able to get the computer up and running again.  After several calls to the Presidents Office I was finally....after 6 weeks of battle able for a cost mind you of $19.99 to get physical DVD's to reintall Windows Vista onto the system - (they should arrive this week)
    So now I am sitting in front of this LENOVA computer wondering ...Worse CaseScenerio...HD FAILURE...and lets face it it DOES HAPPEN.
    so here are my questions
    1: What is the difference between Recovery Disc and Reinstall Dics?
    2: If this Lenova System can only Create Recovery Discs ...and the HD needs to be replaced will the Recovery discs reintsall Windows 7 on this system?
    3: How do I create these discs...I found an option on Lenova Rescue System to create Recovery Discs but it was 24  4.5 GB DVD's to do this?  Windows Vista only needed 2
    Am I missing something here can some one Please help me
    thank you!

    They should sell you recovery disc without any problems. If you call customer service and you feel that the conversation is going no ware you probably talking to wrong person. Disconnect and tray another time, you will never speak to the same person twice
    OEM reinstall disc doesn’t need activation, retail windows disc needs but you have serial number on the sticker so just call Microsoft and activate it.
    Recovery disc is a copy of your computer hard drive with windows, drivers, software included
    Reinstall disc is the same for all computers with windows only, you have to install drivers and software separately
    Reinstall OEM disc is only for Lenovo system but it is the same like retail windows disc with added pre-activation

  • How to create Factory Default Recovery Disc with OneKey Recovery 4.0

    I have a K430 and before I use it it (as with any machine I have bought) I wanted to make my recovery disc(s).
    Throughout this website there are guides to do this with version 7, but this desktop has version 4.0 of OKR
    I can save an image of my system partition but need the ability to install on to a clean hard drive in case of hard drive failure. 
    I have checked the Kb and forums and been through the Windows 8 programs but nothing points me the right way.
    This is compounded by the fact that none of my drive imaging tools like the Seagate drive that was shipped in this machine (Ghost4Linux, CloneZilla, Acronis Easy Migrate) 
    Where is my option to create said media? 
    Solved!
    Go to Solution.

    Just to close this one.
    I spoke to customer support on the phone as this post remained unanswered,
    There are no recovery disc to buy or create for this machine, so should the hard drive fail you would need to source your own discs.
    This machine will now be returned, a lost sale for the sake of a DVD.
    Must say the guy I spoke to on the phone was really helpful and courteous, sadly held back by company policy.

  • New Hard drive replacement not working with Recovery Disc from old drive.

    Had a recent hard drive failure and I my HP Recovery disc that I received last year to to restore after system failure; won't work now on new hard drive.  Unable to copy disc from Drive D to Drive C is the error I'm getting during phase 1 of recovery setup.  BootMgr is not found error when i startup PC.  Unable to recover Windows.  My Hard disk and system memory test were failing, now ok after new drive install'; still can't get into Windows though.

    Hi gardnevd,
    As I understand you are facing a Recovery Issue with the new Hard Disk Drive (HDD) you have installed. Kindly request you to provide me with the following information:
    Product Number or Product Description of your unit
    Click here to know where to find the Product information.
    Once I have this information I shall provide you with instructions on further handling this incident.
    Let us know how it goes!
    *Although I am an HP employee, I am speaking for myself and not for HP.
    *Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    * Click on "Purple Thumbs up" button to the left side of my post to say thanks!
    Regards
    Ahmed

  • Media Recovery Disc

    I have a Satellite P305-S8820, running Vista 64. It does not seem to have the ability to create a recovery disc. When I search for "Media Recovery" or "Toshiba Recovery" I get negative results. When I tried to order a recovery disc, entering my serial number and part number, the only choice I have is for Vista 32. Is there any way I can recover my Vista 64 system in case of a failure?

    Sure, you can upgrade that computer to Windows 7. Be sure to use the 32-bit version. See my recent post here.
    After you restore Windows Vista, follow the instructions.
       How To Manually Upgrade from Vista to Windows 7 - Satellite P300/305
       Toshiba Upgrade Assistant for Windows 7
    Your model's downloads are here.
    -Jerry

  • Recovery Manager Failure: Failed to create EFI partition

    Envy 15-1055SE
    Windows 7 Home Premium 64 bit
    The original HD failed (500GB) and it was replaced it with a working unit of the same size (500GB). Since the hard drive was completely dead and I no longer had access to the recovery partition we installed Windows 7 Home Premium 64bit on the new hard drive, assuming we could use my Windows Key and then just download all the applicable drivers from the HP site. Windows did install and was running, but since my key was not compatible and trying to get all the correct drivers for my specific notebook was essentially impossible I rush ordered the recovery discs form HP. Once received, we then attempted to restore the system using recovery media supplied by HP (590684-003 , WINDOWS 7 PREMIUM 64B + SUPP 2 RECOVERY).
    Multiple attempts were made with the replacement HD raw, formatted or untouched from the last failure. I have also downloaded and used the Cyberlink Recover Discs Utility from the HP site that supposed to resolve Recovery Discs issues, but all attempts ended exactly the same way.  After using and ejecting all three recovery discs Recovery Manager terminated with the same error:
    Recovery Manager
    The Recovery Attempt has Failed.
    Select one of the following buttons
    [Savelog]   [Details]   [Retry]
    Pressing [Details] results in this message:
    CTO ERRORFLG
    Fail to Create EFI Partition...
    Diskpart return error level [-2147024809]...
    Retrying ultimately loops to the same error.
    So, what now???

    So I took your advice and called HP support. As you stated, they recommended new recovery discs, which they sent me and I recieved today. So I went through the whole process again and got the same error.
    When I was on the phone with support they mentioned that I could have purchased a replacement drive from them for 2.5 times the price i paid for mine. And they didn't confirm if that would fix my problem or come with everything already installed.
    At this point I'm at a loss, I don't have the money to pay that much for a "possible" solution, when I have a perfectly fine working new hard drive already.
    There has to be a solution out there, as everyone I talked doesn't understand why the recovery disc/process isn't working. Can someone please provide some useful advise/suggestions?

  • Restoring from HP Recovery Discs

    I experienced a hard drive failure on my Pavillion d4d-1543sb laptop.  Before I new that this was a hard failure I ordered the Recovery CD's from HP which I received last November.  I was not able to get the laptop past the BIOS hard drive tests and so I put the product away for a while.  I just replaced the hard drive with the comprarable replacement of the same size and brought out my Recovery Discs again.  I also ran the memory, CPU and both quick and long version of the hard drive tests, all passing.  When trying to restore from the CD's, the 1st CD loads fine and then I'm asked for the 2nd CD.  This just hangs and the only button that is enabled in the Cancel button.  If I hit the space bar the disc is ejected and a boot-up starts.  The laptop then simply goes into a loop with a restart every 3 to 5 minutes.  I have let this run for over 12 hours and it never comes out of the loop.
    Is there a key sequence that needs to be entered when the second disc is inserted? Are there any other suggestions?

    I think the model you entered was a mistake? Can't find a d4d-1543sb anywhere at HP site to check the specs of your machine.
    Sometimes a new hdd requires prepping with Cyberlink Utility cd first. Download and Save the file. Once download is complete, put a blank cd in your drive and click the file to automatically create a boot cd. Boot with this cd and wait until you get a green check mark indicating hdd is ready. Remove the cd , insert first Recovery Disk and restart the laptop.
    http://ftp.hp.com/pub/softlib/software11/COL32372/​pv-80183-1/sp44645.exe
    If it still hangs on the 2nd disc just leave it for awhile, the drive may be having problems reading it and will move on eventually. If not try tapping the Enter key.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

Maybe you are looking for