Recovery disk error message

Hi,
I am trying to create a recovery back up dvd of the software on my new a666d-st2g01 laptop. When I attempt to do this I get an error message telling me to "insert blank media". I am trying to use memorex DVD-rs. Does anyone know what I can do about this?
Thanks

a666d-st2g01
Maybe this one?
Satellite A660D-ST2G01
If the DVD burner works for ordinary data, then there may be something wrong with the program. If necessary, you can get them from Toshiba.
    Order Toshiba Recovery Media
-Jerry

Similar Messages

  • No Disk error Messages in PSE8

    On and off I keep getting the following error message when I switch between Edit and Orgainzier in PSE8
    and sometime other times.  Photoshop ElementsOrgainzer.exe-No Disk    There is no disk in the
    drive.   Please insert a disk into drive \Device\Harddisk4\DR4.
    I have to hit Cancel 3-4 times to get rid of it.
    What is this and how do I stop it?  Tks. ALan

    I have recently experienced this message repeatedly in PSE6 running on Vista. I believe after either saving a file from PSE6 to a floppy in drive A or opening a file in PSE6 from an SD memory card in drive J. Resolved by recreating both situations then ensuring that i used photoshop to open files from and save files to the resident C drive before removing the floppy disk from drive A and using the 'safely remove hardware' function in Vista to confirm that it was safe to remove the SD card.
    Following this procedure I have experienced no more 'no disk error messages'

  • Disk error message in Organizer

    When I open Organizer in Acrobat Pro 9, I get a No Disk error message:
    "There is no disk in the drive. Please insert a disk into drive \Devise\Harddisk\DR1" with buttons to Cancel, Try Again, Continue.
    If I cancel [and I have to cancel twice for each error message, the message changes to ...Harddisk2\DR2 through to Harddisk4\DR4.
    I always get there in the end, but how can I stop the error messages appearing in the first place? It's incredibly irritating!
    There are no preferences for Organizer, and nothing I can see in the Acrobat preferences that would help.

    I'm surprised PS even runs on that computer although of course 5.0 LE is pretty old.
    A 165 MB file may just be too much for it.
    How can you "set your c drive to 4096MB"? Do you mean Paging file?
    We need someone with a long memory to chime in, but you do need to clarify what you are doing.

  • Hp pavillion a000 recovery disk error.. where to go from here?

    HI.. .fIRST Thank you so much for being here today...
    I have an HP pavillion a000 which was bought used.
    About a week ago I got pre-windows msgs. on the 3rd time it has frozen at this point
    Msg as follows...
    bla bla.. but windows did not start successfully..
    a recent hardwared or software change may have caused this..
    It has counted down and started in normal mode..
    then it has frozen.. and I have tried to start it it all modes..
    This last attempt actually started windows and went back to this screen
    I put in the compaq recovery disk...  I get red screen saying recovery disk error..
    PLEASE Contact support
    I have un plugged..re plugged and we go in circles...
    I'm not sure where to go from here but any suggestions would be VERY appreciated as I do have some artwork I was doing stuck in computer now..
    Do you think it's a software,, hardware or  even a virus thing??
    Additional info... Hp pavillion a000   system no.174A-ABA.   hw bom 8121110   sw bom NA 40
    serial no.  mxk34916m
    operating system.. Windows xp... yes I tried recovery disks I have..  puter says...non compatible..
     I use firefox as browser via century link dsl..
    I can pull the hard drive and I have a harness for accessing the hard drive directly via usb download if you think that's an option but not letting me into windows even has me doubtful that would work;;;
    So as I mentioned.. ANY sugestions you can offer as what to try next would be MOST welcome!
    I can replace the computer easy enough but I would love to be ables to rescue my art in progress at least!

    Hello ValeryWildflowr,
    If the computer was working fine before you might just want to try a system restore. This should correct the problem without affecting any of your files.
    Here is a link for a system restore.
    Let me know if this helps.

  • "Missing Disks" Error Message - Unable to open FCP

    Every time I tried to open FCP, a "missing disks" error message shows up and prevents me from opening the application. It says, "To preserve the integrity of the date used by Final Cut Pro, it is necessary to ensure the existence of the following path(s):" and it says "Macintosh HD is offline." There are two options for the error message, "Check Again" or "Reset Scratch Disks." When I click "Check Again," nothing happens. When I click, "Reset Scratch Disks", it takes me to a "Scratch Disks" window, which shows, "9.8GB on Macintosh HD is offline." I click "OK", but it only takes me back the same "missing disks" error message. What should I do to solve this error and open FCP?
    Thanks in advance.

    Hi -
    If you are mid-project, then first I would find your project file and make a duplicate by Control-clicking on it, and selecting Duplicate. You can rename that new file so it is easy to remember. Once that is done, you have a protection back up of your project file so that whatever happens, you can recover back to this point in your project by opening the duplicated file.
    Selecting (or Re-Selecting) a Scratch Disk does not affect what has been done in a project's past, it will only affect what FCP will do once it is launched and where it will place media and renders as you go forward.
    A bigger concern/interest to me is why the disk Macintosh HD is offline, since Macintosh HD is usually the name of the internal system disk on your computer.
    Have you renamed your internal hard disk (either intentionally or unintentionally)?
    Do you have external disks connected to your computer?
    Have you installed any new software - like Snow Leopard, or Fusion?
    If you have had the disk Macintosh HD selected as your scratch disk all throughout your project up to this point, it is likely that the disk Macintosh HD has your captured footage and renders. So . . . if it is off-line as a scratch disk, once you reset your scratch disk to an available drive and open your project, it is likely that the project will show that all your media, which it previously associated with the missing disk is offline as well.
    If that is the case, you will need to reconnect your media and re-render your renders. This can be done by selecting your offline clips and Control clicking on one of them and selecting Reconnect Media . . .
    *If you are not feeling confident about proceeding, I would recommend a trip to an Apple store to get someone to walk you through the process.*
    Hope this helps.

  • Vista recovery manager error messages

    When trying to create recovery disks I get and error message "not a blank disk in drive".  Tried this with out of box cd's and dvd's.  Same result.
    This question was solved.
    View Solution.

    Hi Whalenbajan,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Notebook and not being able to create recovery discs. The system does only allow you to make one set of recovery disks. Here is a document on creating recovery discs.
    If all else fails then contact HP Support and Order the recovery disks. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Windows - No Disk error message when connecting Ipod to computer

    I recently connected my Ipod to the Computer as I have done for the last year and I am now getting an error message reading: "Windows - No Disk". It then asks me to insert a disk. I cannot cancel out, continue or retry which are the three choices. I eventually have to Ctrl + Alt + Del to close out Itunes. Can anyone help? Thank You.
    Dell XPS   Windows 2000  

    I have been ejecting it. This problem only began recently. I read through about 30 pages of this forum and found someone postoing about the same problem. They said it may be McAfee Viruscan in the background.I'll check that out.

  • "Windows - No Disk" error message on file transfer

    Hello!
    I updated our ZDM7 server from plain old ZDM7 with no updates to ZDM7 SP1
    IR1. Now, when initiating File Transfer operation with any workstation, up
    comes this error message:
    "Windows - No Disk"
    "Exception Processing Message c0000013 Parameters 75b6bf9c 4 75b6bf9c 75b6bf9c"
    [Cancel] [Try Again] [Continue]
    If I click "Continue" 4 times, file transfer starts up successfully.
    Any ideas about how to get rid of this annoying message?
    Toomas Aas

    Toomas,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • 'No Disk' error message on Photoshop startup

    Recently I have been receieving the following error message when Photoshop CS6 x64 srtarts up on my Windows 7 machine. Ps resides on my SSD.
    I don't always get the message but when I press X, Cancel, Try Again, or Continue the message repeats until finally Ps starts. I'm not sure what drive \Device\Harddisk3\Dr3 is supposed to mean. Does anyone have a clue what Ps is complaining about?

    I realize this is a mighty old thread, but I've recently had the same issue with Illustrator CSS 2014, and this is the only thread I could google that dealt with it.
    I scratched my head for a while on this, but I think I figured out the issue. At least I think I figured it out on my end. The error comes from the "recently opened" menu as far as I can tell. I had an old external hard-drive that I was browsing some old work on. I unplugged it when done and continued to go along with my newer work the next day. When I attempted to save my newer work in Illustrator, I got the "no disk" message several times, but powered through it with "try  again" till it saved.
    I'm thinking the error is just the system bumping the file that I had recently opened and now cannot locate slowly down and eventually off the "recently opened" menu. Not sure why Windows is smart enough to bypass this error sometimes and not others with most portable drives, but perhaps its an issue with how old this drive was, or perhaps because I did not properly eject the drive. Networked drives being connected and not connected may cause a similar issue. Not sure.

  • "Can't read or write to disk" error message

    hi...
    got my husband a 16g nano and i'm trying to sync his songs. i have the newest version of itunes installed. it put almost half of the songs on the nano and all of a sudden itunes has an error that says something about "can't write to nano. disk is not readable or writeable." i can view the nano contents, but i can't add to it and it will not let me sync it anymore.
    does anyone have any suggestions? thanks!

    thanks jason,
    i looked at the tips page you suggested and i tried it again on my new laptop and it still won't work. i'm going to try to restore it and then put it on the laptop again, hopefully that will work.
    the odd thing is it will start to sync and it comes up with the error message about half way through syncing (half the songs do make it to the ipod.) why can't it sync the whole way?? i'm perplexed.

  • Importing CD - No Disk Error Message When Ejecting CD

    Every since I upgraded my itunes to the latest version, I am getting an error message telling me there is no cd every time I eject my cd after importing. It gives me an option to retry, continue and cancel. No matter what I pick it does not recognize the next cd and my windows cursor is stuck in a rotating hourglass position even after I end the itunes program! Can anyone please shed some light? Thank you!

    Thanks Bob! My problem was that I was following advice from elsewhere on the internet that said I should burn a DVD in UDF format when in fact just burning it using disk utility in ISO made it work. Thank you so much!

  • IPod Touch stuck in recovery mode, error message 1611 when trying to restore.

    I bought a 2nd generation ipod touch from someone on CL and it appeared to me that it just needed to be plugged into the computer and be synced with itunes. But its stuck in recovery mode. When I plug it into my computer, itunes says it sees the ipod is in recovery mode and needs to be restored. Sout t I click on restore and it tries to restore it, but then it stops in the process and gives me error message 1611. I looked up this error message and it has to do with system security. I messed with my security settings and I still get this message. I tried using my home computer instead of my laptop and it still gave me the same message. Ive also tried holding down the power and home button for several seconds and it still goes back to recovery and gives me the same error message when I try to restore it. Also, itunes recognizes my ipod, but my computer does not.. Can anyone help me? Do I just have to bring the ipod into an apple store and have them figure it out? Thanks in advance!

    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    Have you tried what is in bold

  • "Disk error" message on install

    I have a CD for Windows XP Pro. I ran the BootCamp partition and the first part went smoothly. After I restarted to finish the install, I got this message in a DOS formatted screen...
    Disk error
    Press any key to restart
    When I press a key, nothing happens. I have to restart and select OSX to get my computer back up.
    Any suggestions?

    Shaun:
    Read *[_THIS ARTICLE_|http://docs.info.apple.com/article.html?artnum=306504]* written by Apple to address this issue. There are several threads on these forums discussing this issue and one of them is [HERE|http://discussions.apple.com/thread.jspa?messageID=6210710&#6210710].
    *[_THIS THREAD_|http://discussions.apple.com/thread.jspa?messageID=6560499&#6560499]* discusses the entire issue in details and provides a solution.
    Let me know how it goes and good luck.
    Axel F.

  • Disk error message on Sun StorEdge 3310.

    Hi guys,
    Does anyone see the following error message in the /var/adm/messages? Should I have to replace this faulty disk?
    Mar 6 11:06:21 balrog scsi: [ID 107833 kern.warning] WARNING: /pci@1d,700000/sc
    si@1/sd@5,0 (sd36):Mar 6 11:06:21 balrog Error for Command: write(10) Error Level:Retryable
    Mar 6 11:06:21 balrog scsi: [ID 107833 kern.notice] Requested Block: 5491072 Error Block: 5491079
    Mar 6 11:06:21 balrog scsi: [ID 107833 kern.notice] Vendor: SEAGATE
    Serial Number: 0447B9LRDV
    Mar 6 11:06:21 balrog scsi: [ID 107833 kern.notice] Sense Key: Hardware Error
    Mar 6 11:06:21 balrog scsi: [ID 107833 kern.notice] ASC: 0x32 (no defect spare location available), ASCQ: 0x0, FRU: 0x4
    Looking forward to your comments.
    Jeff.

    A good output that would give you a hint of a problem is iostat -En
    This output reports anykind of errors to a particular disk since the last reboot. If you are seeing high error numbers, then you can move onto running a file system check - fsck - on the drive.
    If you have anykind of RAID setup, check to see if any issues are being reported. Depending on what you are using to manage the RAID - Veritas Volume Manager or Solaris Disk Suite - they will most certainly tell you if there is an issue. A vxprint for Veritas and a metastat for DiskSuite will show you what you have setup and if there are any recognized disk issues.

  • Window - No Disk error message after update to iTunes 7.1

    I updated to iTunes 7.1. After turning on iTunes for the first time after the download, I get a box that says "Updating iTunes Library". During this process, I get the dreaded error message: "Windows - No Disk" I clicked on it a few times and it went away. Then it came back and no amount of clicking would make it go away. At this point, iTunes no longer responds. I have gone thru this process now about 5 times.
    What is the fix?
    Does Apple answer this issue anywhere or is it left to its customers to speculate about this stuff?
    Thank you fellow consumers.
    David
    dell laptop   Windows XP  

    Do you mean like it says Windows-No Disk in Drive, please insert a disk? That type of message?
    Rachyl

Maybe you are looking for