Recovery disks not working for Satellite L350

I have a Toshiba Satellite L350 which I bought some years ago
Originally it was a vista home premium laptop and I opted for the Toshiba windows 7 upgrade and its been pretty much trouble free .
However recently something went a bit weird and things just were not working well (it would not always log you out and never seemed to shutdown correctly) and various other applications did not run correctly.
After a few uninstalls ,reinstalls, scans and Microsoft patches did nothing I decided to take the plunge and use the recovery disk.
I had bought one from Toshiba when I got the machine originally and had made one myself before the upgrade to windows 7 and one again after.
I still have the windows 7 upgrade dvds so I can apply them after if I had to start back on vista again.
The only other big change has been a RAM upgrade to 4gb - I still have the original RAM if I need it but before all this there were no hardware issues reported and chkdsk was fine also.
So to me it was the o/s that was the problem.
I have now tried all the recovery disks and they all have the same problem reporting that imagex cannot uncompress the second file image as it is corrupt at block 90 I dont have this actual message to hand
but can update later.
I cant see that Im doing anything wrong as all i do is put the dvd in the drive and restart the laptop with F12 to boot off the recovery DVD and follow the on screen commands.
Have you any reports of such of this previously or am I doing something stupid?
Thanks

Thats very strange that al recovery discs show the same error message. As far as I know when you start recovery image installation the HDD will be formatted, new partitions created, recovery image copied on second HDD partition and as last step is recovery image installation.
>I had bought one from Toshiba when I got the machine originally and had made one myself before the upgrade to windows 7...
Have you tested both of them in the past?
Generally speaking all you do is right. In my opinion the problem can be recovery image itself or maybe HDD has some failure on certain sectors.
If you can obtain second HDD somewhere exchange it, set BIOS to default settings and test recovery installation again.

Similar Messages

Recovery media not working for Satellite L455 S5000 , windows 7 -64bit

Guys, My Satellite L455 crashed the drive. I ordered the kit from TOSHIBA to do a factory reinstall. The instructions says: Hold "C"key while bringing computer up. I tried it several times but nothing happened. I tried to boot from the DVD drive but it din't work at all. How may I do to restore my PC using the recovery media with a new drive ? Remembering it's Satellite L455 -S5000 , windows 7 , 64 bit. Thanks in advance. Joelson

Thanks for the replies.
The HDD is completely broken. The recovery partition gone too.
About the F12, I tried it.
Choosing the DVD drive to boot using the recovery disc #1 inside nothing happens.
The DVD drive starts, first acess to DVD media happens but nothing appear in the screen. Few seconds after the system try to boot from the new HDD that is empty.
My objective is reconstruct the windows in the new HDD bringing back the HD to it's original structure ( without any data ) like a new one.
Remembering that old drive and new one have the same size ( just the brand is different , new one is SAMSUNG SATA ) . Old one was TOSHIBA .
Any insight is welcomed.
Thanks a lot.
Joelson

Recovery disks not working

I have an HP G60 Notebook PC, Product # NW144UA#ABA
The computer got a virus and couldnt open Microsoft Office applications so I wanted to restore it to the original factory settings. I created my own set of recovery disks (used 3 DVD-Rs). I started the recovery manager and followed the steps, the first disk worked just fine then popped out and asked for the second. I tried to put in the second disk (correctly labeled from when it was made) and it said the disk is not good, please insert disk #2. I have tried this several times and same thing. Now I can't even get back to the regular computer. When I turn it off or cancel the recovery manager it comes up with a black screen saying BootMGR not working (or something.. cant remember exact words). At one point in trying the recovery manager I got an "error 1002 please contact HP" message. I have tried to keep inserting disk #2 and after 20 times it still wouldnt work. I have tried to call HP customer service and was told I could buy recovery disks, but shouldn't my disks work? Please help!!!

Hi:
Sometimes the recovery disks don't work that you make for one reason or another.
Unfortunately, there are hundreds of posts like yours and unfortunately, very few answers. I have yet been able to help someone get their recovery disks to work.
So, I see that you may have two options (only one if you can't read all 25 characters of the Vista product key on the bottom of your PC:
1. Order a set of HP recovery disks and hope they work.
2. Make your own plain windows vista installation media if you can read your vista product key.
This will NOT restore your PC to factory condition. It will only install the operating system, and you will need to either have your program installation files and also use whatever downloads and drivers are available from your notebook's support and driver page.
Start from page 289 at the link below.
http://philipyip.files.wordpress.com/2013/01/windows-reinstallation-guide-03-03-2013.pdf

Satellite L455-S500 Recovery Disks NOT Working (Windows 7 HP)

DH bought a Satellit L455-S500 in May of 2010. It worked well for just over three years. Then it into a spiral of failing to boot up...virus scans showed issues and nothing was removing them. The computer would not make a backup copy - so we started the recovery process with the press 0 and release as it booted.
The recovery partition had apparently gotten corrupted. The recovery process failed.
Recovery media was ordered from Toshiba and we tried again.
Hard drive was wiped and recovery media disk one was placed in the optical drive and the computer went into the installation of a clean copy of the OS. It asked for the second disk - then gave error code 10-FC12-0241 and said to click [OK] to shut down. It reboots at that point and gives error code F3-F200-0002 and again says to click [OK] to shut down. It does NOT reboot at that point.
I've tried the original hard drive (wiped & formatted) and a new hard drive from the local electronics store. I've tried removing the memory stick (RAM) from the B slot and I've tried swapping the memory stick from the B slot to the A slot.
We replaced the laptop after a couple of days as he NEEDED a working one for his job - but he doesn't LIKE Windows 8 (no touch screen on the replacement laptop). I'm still trying to get this one working again so that he has a spare that he LIKES working with.
The error codes show that the most likely issues are with the hard drive or the memory. But I haven't had any luck with any of my attempts to get it working again, even as a clean install.
Could it be the recovery disks that have the issue? Or do I need to try one more time with a brand new, unused hard drive, instead of a working one pulled from another laptop?

Try reformating the hard drive to one raw partition before using the recovery media. You can use a windows 7 disc to format the drive then remove the disc and start with the recovery media.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Satellite Pro L300 PSLB1A: Recovery disk not working - 0xc000000f error

I get error 0xc000000f when restarting and if i try the recovery disk i get error error: 10-FC12-0241
operating system is vista business and laptop is toshiba L300 PSLB1A - 02S008

Hi
You mean you cannot boot the notebook using the Toshiba Recovery disk which you have created?
Go to the BIOS and check if the CD/DVD drive is recognized. It should be listed on the first BIOS page.
If the CD/DVD drive is not listed then you should set the SATA mode to compatible and should save the changes.
After that try to boot again from the Recovery disk.
I also searched on the Toshiba European driver page for some info and found some details;
There is a firmware update for CD/DVD drive TS-L633A and TS-L633P.
This Firmware solve "Sometime not able to writing on DVD+R media".
The issue happens only DVD+R media, other kind of media have no problem.

Satellite C50-A-19T - recovery disks not working

I have a Toshiba Satellite C50-A-19T laptop with OS windows 8.1
Recently my laptop had booting problems so i contacted toshiba support and they told me to get recovery disk from backupmedia.toshiba.eu and i ordered the disk and it arrived today#
When i enter the recovery disk and boot from the disk drive (ODD) it brings the windows logo then after a minute it goes to a blank screen and i waited and after a while it was still a blank screen
I had already went into the BIOS to change the settings to boot from the CD but even after that the same problem persists
Please help

Hi
Go to BIOS and disable the option called: secure boot
Now you should be able to boot from the ODD.
By the way: please check if the HDD is listed on the first BIOS page (name, size, etc)
In case the HDD details are not visible, the HDD isnt recognized by BIOS this could be related to HDD malfunction.

Erasing my hard drive with recovery disk not working

So recently I was infected with Security Central malware and ran an anti-malware removal program, which worked for a week or so. Yesterday it came back and after attempting to run the anti-malware program again, it cannot find any, though Security Central is still affecting my computer.
What the malware is doing is not allowing me to open ANYTHING. Not a Word file, Internet, application or program. I cannot run a disk either. I decided, because my Toshiba laptop has a number of other problems with slow performance, to backup everything to an external hard drive and erase my hard drive and run the recovery disc.
I ran it in Safe Mode to move all my stuff onto the external hard drive and then inserted the recovery disc. Because of the Securty Central malware, it will not run in normal mode and my laptop says it cannot open the disc in Safe Mode.
All I want to do is erase my hard drive and start over but I cannot seem to do it. I'm not crazy tech-savvy and I know there must be a way to do this but I've tried everything I know how to do. Help??? Thanks!
BTW: my computer is a Toshiba Satellite M115-S3094

Corrected instructions for Recovery and Applications/Drivers Media Document ID: 98082279
CAUTION: The Recovery process reformats the computer's hard disk drive, which completely erases its contents -- including all applications, all documents, and all other data stored on the drive. Be sure to back up your documents and other data before following the instructions below.
Follow these steps to erase the current contents of the hard disk drive and to re-install all of the software that was installed on the computer when it was manufactured:
1. With the computer on, insert the first Recovery disc into the optical drive.
2. Shut down the computer (click the Start button, click Shut Down, select Shut Down, click OK).
3. Press the computer's power button to turn the computer on, and then immediately press and hold the F12 key. Release the F12 key when the menu of boot options appears.
4. Use the arrow keys to navigate to the CD/DVD option. Press the Enter key to select it.
The computer will restart, and will boot from the Recovery disc.
5. Follow the instructions on the screen to start the Recovery process.
CAUTION: Once the Recovery process has begun, do not interrupt it.
The computer's hard drive will be formatted, erasing its contents. All of the software that was installed on the computer when it was manufactured will then be re-installed.
6. Once the Recovery process is complete, remove the Recovery disc, and press any key to restart the computer.

Recovery Disk wont work for new Hard drive.

I have a HP Pavilion dv5-2132dx with windows 7 64-bit. Recently a message started popping up warning that the hard drive might fail and I need to back up my data. I decided to buy a new hard drive. The hard drive a bought is 320GB SATA 7200RPM by western digital. It is the same brand and model as the hard drive currently in the computer. I popped in the new hard drive and inserted the recovery disks I bought from HP. The computer goes through the whole process of istalling the disks. However, on the final setup it shows the welcome screen. Then u hear a beep and then the screen goes black with a message saying that windows could not install and to try installing it again. I have done this 3 times and its always the same thing. Is this a Hard drive issue or a software issue and how can i get this to work?

Hi,
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
Assuming that this is just a problem with the Recovery process, there is a straight forward work around.
Create a retail Windows 7 installation disc yourself using another PC - just download the correct Disc Image from the link below ( this must be the exact version your notebook came with ) and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Recovery Disks Not Working - Windows 8

Hi,
This relates to my G6-2240sa HP Pavilion, bought 14 months ago, preinstalled with Windows 8 (later upgraded to 8.1)
Just out of curiosity I installed Linux Mint, hoping to dual-boot my system.
In the process I have wiped out everything on my HD.
I didn't mind that so much, as a fresh install of Windows 8 would have been welcome.
But now I find that the recovery disks (4) that I created are not working.
Whichever of the three options I choose (and I have tried them all) the process grinds to a halt, becoming unresponsive at anything from 7% to a max of 34% on the second disk. Then I am confronted with "The destination Drive is not Connected"
(I presume it means my hard drive. What on earth had it been doing for three hours, to suddenly discover that?)
I have run the HP PC Hardware Diagnostics UEFI thorough disk test and it comes up as Long DST: Passed, Memory Quick Test: Passed.
Started the recovery process from the bios defaults, using the optical drive as the first boot device, which only managed to reach a max of 17% before freezing. Strangely, the better results of 34% came from using a USB external DVD)
I have been through most of the other posts on here to find a solution, but none of them seem to apply to my specific problem.
Took it back to PC World, where I was informed that my best bet would be to buy a set of Recovery disks for my Model, Serial number, Product ID, obtainable from the Netherlands at a cost of £42, and I am waiting for them to arrive now.
Now I'm wondering, at the risk of throwing good money after bad, would it make more sense to buy new Windows 8 software or a different computer?
Surely having paid for a system that claims to offer security in the form of a recovery procedure, I am entitled that it should work as claimed.
After more than a week I'm at my wits end as I cannot use any of my programs without a Windows platform.

Success!
Although I have to say that with a poplation of over 7 billion I did think that my problem would have attracted more response than just one reply.
However, my thanks to Indypat for that. You gave me the hope to keep trying.
I read your solution from your link Pat, removed the SSD (taping the bare connectors, just in case), did all the other things suggested and tried again. Twenty more times! Still no go.
Was just surfing the net to find the cheapest OEM to buy, when the mailman (We call them postmen) arrived at last with the recovery disks I had ordered.
Started the process at 10 am ( I think I had to replace the SSD first to authorize the process) and by 4 pm recovery was complete! So my conclusions are that the recovery disks I made, did not work. Don't ask me why - I made them all according to the instructions - maybe the medium was faulty?
Now, (and for the foreseeable future as far as I can see) I shall continue updating Windows and reinstalling all my precious programs.
Still, after two weeks' cast into the outer darkness, at least I have clean Windows.
I'm glad you got your own problem sorted at last Pat. Like yourself, I am an HP fan. (again)

Hp recovery disks not working- will not reboot

I have an hp envy ultrabook touchsmart model 14-k033TU. About a week ago the laptop decided to shut down and perform an update. It was bed time so I let it do it's thing. During then update it may have switched off as it was not plugged in ?ran out of power. When I next tried to switch it on a blue screen appeared with a sad emoticon with the message "your pc ran into a problem and needs to restart. We're just collectinng some error info...". I cannot read the source of the error as it flashes by too quickly. It alternates between this blue screen and a black one that says "preparing automatic repair".
I called hp after trying a few solutions online, several of which weren't applicable as it will not start normally. It just loops between the two screens. They sent me some recovery disks but I had to purchase a usb cd/dvd drive to use these. I put the first disk in and nothing happened. I pressed esc and tried to boot from disk as someone suggested but it did not work. The loop continues. I am not sure what I else I can try. I guess it's deeply corrupted now. Any ideas?

Hi @Yana5789
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I have compaq cq50. was VISTA upgraded to WIN 7. Recovery disks not working. BOOTMGR compressed

will not boot up. I have 2 recovery disks, the 1 of 2 will take but 2 of 2 disk doesnt run.

Hi:
If you are trying to use the Vista recovery disks and they are not working, and you can read your Vista product key on the bottom of your notebook, then you can make your own Vista installation disk by reading the guidance below.
If you're up to a slight but rewarding challenge you can make your own if you can read your 25 character Vista product key on the PC.
Just download the 3 files you need at the link below, and read all of the instructions to create a bootable DVD installation disk using imageburn.
Disregard the part of the text under the first screen shot about "extract the files to the Vista folder."
The files were already extracted to that folder when you ran the X14.exe file by reading the text on top of the first screen shot.
The other thing I noticed is on the 4th screen shot, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in myself, and then the other codes automatically populated.
When I went to compile the ISO file, ImageBurn gave a message that about a WIM file and ISO, and if I wanted to burn it in a different format.
I selected No, make the ISO file.
It was not that hard to do. I burned both the 64 bit disk and the 32 bit disk in case I ever need them.
I tested both of them an my hp dc7100 CMT desktop PC, they worked perfectly.
When you enter the product key, it knows what version of Vista you have.
http://en.community.dell.com/support-forums/software-os/w/microsoft_os/3317.2-3-microsoft-windows-v....
After you successfully install Vista, you can then install the drivers from your PC's support and driver page.
Paul

Recovery does not work in Satellite U405-S2854

I got a virus and used the recovery disks. The second disk showed a message "cannot read from the source file or disk PREINST5.SWN
I tried again and the same message appears. So I press the SKIP option. After lot of time, a message error again:
Error 10FC06-0002
Recovery error.
Well, if even the recover from toshiba can work, we are lost!!
Could somebody help me?
many thanks
Message was edited by: marianasauer
Well, the last bad news: after this, the machine tried to restart and a message in a black screen : BOOTMGR is missing.
Nobody deserves it!! :-(

Hello
I dont know what is wrong there but in Recovery category you can find several threads where the people report about same issue. it is interesting that this is reported by US notebooks only.
I am from Europe and I dont know how recovery procedure works there but you can ask this on US forum under http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1
I hope you will find answer there. If you find it please let us know what the problem can be.
In my opinion it can be either defective recovery image or some HDD malfunction.
Sorry buddy but such error message is not known to me and I cannot offer any precise answer.
Good luck!

S-video output not working for Satellite A60

The s-video output on my laptop is not working. i have tried the Fn-F5 hotkey, but i don't get a damn output on the tv.

Hi
First:
Has it ever worked before?
Yes? then make sure that you don't have a second desktop activated. Go into the displaysettings and rightclick the second screen. Make sure it is not set to "attached".
If your machine also have a composite out, try using that instead.
Does it work?
If yes, your machine is at least software-wise able to output the picture to the TV.
If no, then there is probably something in the software that stops the picture from going out to TV.
It could of course also be a hardware related problem but it is less prabable that both the s-video and the composite-ports are defective.
Try checking the settings for your videodriver.
No?
If an s-video cable was delivered with your computer, make sure to use that one.
Check the s-video cable with a traditional DVD. This way see if the cable and in-port on your TV is ok.
If you are using the cable that came with your PC then you should defenitely check for settings in the videodriver.
If it is not the cable that came with your PC (or no cable was delivered with your PC) try check the manual for hints on a compatible cable.
Sorry for the quite messy respons - it is not easy to write a think-flowchart here.
Good luck
Tom

Recovery disc does not work for Satellite A100-197

I am working on a A100-197 that would not boot into ordinary Windows but was able to boot into Safe mode.
I used MSConfig to turn off everything at startup and all non-MS services. No good.
I used system restore. No good.
I scanned for viruses, rootkits etc. None found. No good.
I copied data to another hard drive using safe mode with networking and inserted the recovery DVD.
Went through unpacking and got message telling me to remove DVD - did this and system appeared to freeze.
Hit the exit button and it rebooted but Windows froze (the moving blobs stopped moving). Tried safe mode
but got a message saying that the system installation did not finish.
Tried the recovery again but this time I left the unpacking screen at 100% overnight to see if
it did anything. It didn't. Clicked exit and got the same as above.
Formatted HDD in partition magic and tried again. No good.
Created 5GB FAT32 partition and copied DVD files to FAT32 partition. Tried to run the unpacking program
from DOS. It refused to run in DOS mode.
I'm thinking of linking the hdd to another machine and running RecoUnpack.exe from a working PC to
unpack the image files onto the laptop HDD, but this is crazy - the recovery disc is supposed to recover the
system. What else can I try?

Thanks Dennis. I was starting to think similar things myself.
There was a program installed called Daemon Tools which uses
SCSI Pass Through Direct (SPTD) layer. My analysis suggested this was the rogue
program but I followed all the uninstall procedures and couldn't seem to solve the problem.
I don't suppose (and I've never had anything like this before) that it could have fouled up
something in the hardware layer? I tried resetting the BIOS to default settings. Maybe I should
flash the BIOS? Could it have altered any other ROM on the laptop? Is there other ROM on
the laptop?
I hate software that ruins computers! Why can't people just use their b***** machines for sensible
things?

Windows will not boot. Recovery media not working. Satellite L675D-S7052

I am using a Satellite L675D-S7052 with Windows 7. When the laptop is powered on, it will only run to the Windows loading screen (windows logo on screen) and will stop. The logo remains animated but it will not load any further.
I attempted to reset to factory settings using the recovery partition. It will run through "Windows is loading files" to completion, but it will then go to a blank screen with only the mouse cursor showing.
Finally, I attempted to recover from recovery DVD's I made previously. It loaded through the same screens as the recovery partition, halting again on the blank screen with the mouse cursor.
I backed up all important files on an external hard drive already. I was able to successfully boot an Ubuntu 12.04.2 live disk and it ran correctly. I can access the files on the hard drive for back-up from Ubuntu. I have not altered anything.
That's as far as I can go on attempting to fix this. If anyone can help me find my next step, please advise.

Hi! Sense you're not getting any replies, I will offer my opinion. Sense you can boot Ubuntu OS and it runs correctly,what else could be the problem but bad software?? You tried the recovery partition and the recovery DVD's and they reacted the same?? It's good that you can recover your important files. The recovery options are great, but a back up image on a external USB is your best protection. I just don't understand why people don't create a back up image of their OS. It's so simple!! When did you create your recovery DVD's?? Sense both recovery options act the same, I suspect corruption. That's the only thing that makes sense to me??
Dokie!
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Recovery disks not working for Satellite L350

Similar Messages

Maybe you are looking for