Recovery failed : help needed

Hi experts,
Can anybody say why this is happening, already done restore of controlfile and datafile until this time, but recovery is failing.
RMAN> run
2> {
3> allocate channel ch1 type 'SBT_TAPE';
4> recover database until time "to_date('05/25/07','MM/DD/YY')";
5> }
allocated channel: ch1
channel ch1: sid=13 devtype=SBT_TAPE
channel ch1: VERITAS NetBackup for Oracle - Release 5.1 (2004043016)
Starting recover at 13-JUN-07
released channel: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 06/13/2007 11:00:39
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20011: target database incarnation is not current in recovery catalog
Thanks
Shaan

This database incarnation has not been registered at the repository catalog. Issue the register command.
Be aware if this happen to be a cloned database, database id should have been reseted with the newdbid tool, othewise rman will consider it is an unregistered cloned copy of a current database.
~ Madrid

Similar Messages

Upgrading Stellent 7.5 to OCS 10gR3 Import Process failing HELP NEEDED

Hi,
I am upgrading Stellent 7.5 to Oracle COntent Server 10gR3. Here is what I have done.
1. Migrated all the configuration from Stellent to 10gR3
2. Migrated the Folders from Stellent to 10gR3
3. Migrated the content by creating an Archive and then importing the Archive in 10gR3.
I am seeing lot of errors in the log file. Following are the errors I see in the log file.
1.
Could not send mail message from (null) with subject line: Content Release Notification. Could not get I/O for connection to: hpmail.rtp.ppdi.com java.net.ConnectException: Connection timed out
2.
Import error for archive 'ProductionContent' in collection 'prod_idc': Invalid Metadata for 'ID_000025'. Virtual folder does not exist.
3.
Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_004118' was not successfully checked in. The primary file does not exist.
4.
Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_004213' was not successfully checked in. IOException (System Error: /u01/app/oracle/prod/ucm/server/archives/productioncontent/09-dec-21_23.29.44_396/4/vault/dmc_unblinded_documents/4227 (No such file or directory)) java.io.FileNotFoundException: /u01/app/oracle/prod/ucm/server/archives/productioncontent/09-dec-21_23.29.44_396/4/vault/dmc_unblinded_documents/4227
5.
Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_031414' with revision label '2' was not successfully checked in. The release date (11/4/08 9:12 AM) of the new revision is not later than the release date (11/4/08 9:12 AM) of the latest revision in the system.
6.
Import error for archive 'ProductionContent' in collection 'prod_idc': Invalid Metadata for 'ID_033551'. Item with name '07-0040_IC_Olive-View_UCLA_ERI_Cellulitis_2008-08-26.pdf' already exists in folder '/Contribution Folders/2007/07-0040/07-0040Site_Specific_Documents/07-0040Olive_View_UCLA_Medical_Center/07-0040Archive/07-0040Essential_Documents_ARC/07-0040Informed_Consent_ARC/'.
7.
Import error for archive 'ProductionContent' in collection 'prod_idc': Aborting. Too many errors.
QUESTIONS:
Is there a way to keep the import processing running even if the errors are coming. As it looks like when there are too many errors the import process stops in the middle.
How do I find out the total number of folders and the documents. As I want to run the same query on Stellent 7.5 and find out total number of folders and the documents and then run the same query on 10gR3 and compare the results. Just want to fnd out how much content is imported.
How do I run the import process over again as half of the content is imported and my import process failed in the middle when running the process over again what settings do I need to provide to make sure no duplicates get created etc.
Any help is really appreciated.
Thanks

Hi
There are a couple of ways to get around the issues that you are facing such that import process is not interrupted because of these. They are as follows :
1. Use ArchiveReplicationException component . This will keep the import process running and make a log of the failed process which can be used for assessing / gauging the success of the import and what all needs to be redone.
I would suggest this as the option for your case.
2. Put the config variable for arciver exception to 9999 so that the archive process stops only after hitting the limit of 9999 errors.
I would suggest to go for step 1 as that would be a much more foolproof and methodical way of knowing what all items have failed during import.
Thanks
Srinath

Recovery mode help needed

Hi everybody my name is mick i am married to Olwyn i have two Kids Aaron and Brittany i work for the NHS as a care worker i am new to the world of forums but i need some help please i have an iphone 3g that does not do much so i have been given a iphone 3g by my daughter to use until i can upgrade it had a faulty ariel and a cracked back so i had that repaired only to find that the phone was in recovery mode i have tried to link it to itunes but it said i need to get it out of recovery i have tried to hold the power button and the home button but this did not work can somebody please help i would be very greatful
thanks
Mick the yid

Have you updated Itunes to the latest version?
When you connect the USB cord to your computer does Itunes see the iphone?
(if it does what does it say exactly)
If its in recovery mode you will need to restore & update it.
Which there should be a button in itunes under (devices on the left side that should say Iphone)
When you click on that it should take you to a screen that has a restore button.
Click on the button and follow the on screen guide to update it.

Recovery disks help needed

hi all i have just purchased a s12 ideapad and im having some trouble with recovery disks.
i cannot make disks from the one key recovery as it does not allow and everytime i try to use the one key resue system on the keyboard it just boots into windows.
i really want to restore this ideapad to factory settings so how can i do this, both options do not work.
cannot find the specified file!!
can i get these disks from lenovo?
or can someone help me with my problem?
thanks

this can be closed the s12 went back to base and im waiting for them to send back with origonal boot image

Recovery disk help needed

I recently replaced the disc drive on my Toshiba Satellite A105-S4284 laptop. I attempted to use the recovery discs that came with the laptop but only one disc ran & formatted the drive. Why didn't it ask for me to insert the 2nd disc? After reinstalling Windows XP, I find I cannot connect to the internet or even locate my wireless wifi.. Also, how many MB's should I set aside when formatting the drive for partitioning?

Satellite A105-S4284
Downloads are here
After reinstalling Windows XP, I find I cannot connect to the internet....
Start over with a clean install of Windows, because the order of installation matters.
Install the Intel chipset software followed by its display driver prior to any other driver. (Ignore all that nVidia and ATI stuff.) Install the Common Modules before any other Toshiba utility
I would create a single partition encompassing the entire drive.
-Jerry

HP Pavillion dv6-6117dx "Recovery Has Failed" HELP ASAP

So on my HP Pavillion dv6-6117dx with Windows 7 Home Premium 64-Bit, I am trying to use my recovery disks to recover to Factory State. I do everything it says too do. But after the Supplementary Disk ejects and goes to the screen HP Installing Applications or something its like a green screen with 2 bars and when that is done it just pops up with an error saying "Recovery Failed" it gives me three options "Save Log, Details, Or Retry." I've done all the steps. Retryed about 7 times but every time the same thing pops up. I need to know how to fix this by 3/16/13.
- Quaid
This question was solved.
View Solution.

You're very welcome.
Glad the workaround helped you.

I forgotten my bit locker password and recovery key.i need help .................

i lost my bit locker password and i lost recovery key,i need help ..please help ......such important things are there in my e drive....pls mail me [email address redacted]

Unfortunately if you lose the password and the recovery key you are not able to decrypt and access the information, that is the sole purpose of BitLocker.
Blogging about Windows for IT pros at
www.theexperienceblog.com

HT1339 after restoring my ipod nano (6th gen) it says that it is in recovery mode and needs to be restored. i cannot get passed this stage. help!!!

I have restored my ipod nano 6th generation and am being told it is now in recovery mode so needs to be restored which is what i have just done. I can't get any further than this. Please help.

Are you really running Windows 98? I sure hope not. :S
I have noticed a few others with the same problem the past couple of weeks. Many of them were able to resolve the issue by doing a low level reformat of the iPod's flash storage using the instructions in this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/
B-rock

HT201210 i have a broken button and my ipod is in recovery mode i need help i dont no what to do

i have a broken button and my ipod is in recovery mode i need help i dont no what to do

What happens when you try to restore via iTunes?
What button is broken?

[HELP] need TX2 recovery DVD/Image

[HELP] need TX2 recovery DVD/Image HP won't repair it b/c i dont have the original software....can someone provide me an image or i will pay $ for DVD plz full model is TX2-1024CA

That is a notebook PC. Maybe this document will help? http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

HT201210 at the end of iOS6 download,my ipod touch says 'update failed'.i need some help to resolve this problem. thanks

at the end of iOS6 download,my ipod touch says 'update failed'.i need some help to resolve this problem. thanks

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next connect to iTunes and update via iTunes. Others have had the same problem.

GT70 0ND-204US Windows 7 removed and recovery fails due to drive reformat

Model Number:GT70 0ND-204US
Hello,
I was attempting to install Unbuntu from a LiveCD to an external hard drive and I believe during that process I accidentally reformatted the SSD to be an ext4 partition and swap space. When I rebooted to try to get into windows I got an error that said, "Bootmgr is missing" and when I tried to enter recovery mode I got as far as seeing a Windows 7 like user interface but then I was shown the error (paraphrasing here), "The installation drive must be named OS_install please try again."
I'm typing this using the LiveCD on the undermentioned computer and can use any tools available in Unbuntu if further diagnostic information is needed.
Cheers!
Also I would like to thank anyone in advance for their help and even if you're just reading this I appreciate the time you have given.

Refer to >>Recovery HotKey User Manual<< or >>Reinstalling Windows when recovery fails<<

Help needed on installation of Oracle 9i on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Help needed on installation of Oracle 9i EE on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Help needed on CD740 ???

Help needed on CD740 ? My CD740 is GREAT , well , it was great !!? The sound and general performance are wonderful , but , it now has a fault !!? Shock Horror !!
What can it be ?!!? Well , the display illumination has failed , as in , there isn't any !!? Have to use a torch to read it !!? Not good. Now , here's the thing , I want a phone number (UK zone) ?to talk to an actual human and I cannot find one !!? That is soooooo annoying !!? The unit is out of warranty so I want to repair this myself , no worries , I once worked for Philips in their pro studio equipment repair workshop so I know my way around black boxes !! I would like a service manual though so that I can get the case apart without damage. So , can anyone help me with a phone number , pretty please ?!!
Thanx.

I tried compling servlet, but it is raising error
that coul not find package javax.servletWhat I did not mention... you need to add those JARs in the Classpath explicitly. You will find them in %TOMCAT_HOME%\common\lib. You atleast need to add servlet-api.jar to your Classpath. :)

Recovery failed : help needed

Similar Messages

Maybe you are looking for