Recovery from External hard drive

So I backed up all my files onto an external hard drive using the hp program, before reinstalling windows. However when I go to restore them it goes through and restores some of the files and then when it gets to 100% and it says please insert disk 2. I cant think of what it would mean as disk 2 I only used this one external hard drive to back it up, and now most of my files are missing. Can anyone help? Is there a way of viewing what files are contained in the .swm files or can anyone tell me what to do about this disk 2 thing?

Lots of programs out there from which to choose. In the meantime, don't access the drive.
18 Free Data Recovery Software Tools
-Jerry

Similar Messages

How do I restore backup1.swm files created during system recovery from external hard drive.

On my hp dm1 with windows 7 In full detail, this is what I did. I clicked to do a system recovery, it asked if I wanted to backup the files, I said yes. It said it backed up my files on the external hard drive. I continued the system recovery. It set my computer back to factory settings. I tried to recover my backup, it acted like it was restoring the files and showed them going into the c: area in a folder. I open the folder and it says the folder is empty. I hit properties and the folder contains 10mb+ of data. I go back into my LaCie drive, there are files labeled like backup.swm, backup1.swm, backup2.swm. I can't open these files or do anything with them. In a text document it lists all the files it apparently copied. It is only a list of text, nothing else. Have a 12 page research paper in these back ups that is due in a few hours so any help will be greatly appriciated.

@Daniella1985,
If the standard procdure of locating the program launcher (a .exe file) on the first backup media (disk 1 or the external storage device) is not working, then you can manually extract the files using 7-zip.
7-zip can be found here.
Once 7-zip is installed, open it and navigate to the first .swm file of the backup. Right-click the .swm file and select 7-zip>open archive. Once that opens, it should reveal the contents of the .swm files. If the file contains something you want to keep, you can either extract each invidual file or extract the entire directory. If you want to extract each individual file, highlight the desired file and click the extract button at the top. If you want to extract the entire directory, make sure no items are highlighted and click the extract button at the top.
This is a manual process and it can be a large task depending on how many files were backed up, but it is one method to get the backedup files when the standard procedure is not working.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Data recovery from external hard drive

I'm sick! I was attempting to format my flash drive and I accidentally chose the wrong drive and formatted my Toshiba 3.0 external USB hard drive with over 350GB of data on it. Is there any way at all to recover my files?

Lots of programs out there from which to choose. In the meantime, don't access the drive.
18 Free Data Recovery Software Tools
-Jerry

How do I restore backup swm files created during system recovery from external hard drive

Good day,
I was facing some problems with my laptop (HP Envy 17 3D Notebook with windows 7 home premium, 64 bit) and I had to return it back to its original state using system recovery.
During the process I was asked if I want to back up my data. I have chosen to backup my data in the flash drive. Once the process has completed and my laptop is to the original state, I tried to recover my backup but it tells me:
The version of this file is not compatible with the version of windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher.
If i click run as administrator it tell me:
Windows cannot find 'F:\Backup_2015-04-29 143842\Restore.exe'. Make sure you typed the name correctly, and then try again.
there are files labeled like backup.swm, backup1.swm, backup2.swm. I can't open these files or do anything with them. In a text document it lists all the files it apparently copied. It is only a list of text, nothing else.
any help will be greatly appriciated.

Hi @Jef35,
Welcome to the HP Forums!
It is a superb place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that while doing the recovery back to factory you opted to backup your personal files and would now like to know how to restore them .
Here is a link to HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
If you appreciate my responding, please click the kudos button below to say thanks.
If this resolved your difficulty please select solution provided to enable other posters to locate this information more easily.
I hope this helps
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Recovering data from external hard drive

I backed up music,pictures and personal documents
It said backup was successful, I they to retrieve some documents and none of the those files were in that restored folder

Very similar with your experience
Last time when I was in Rio, I took part in the famous Carnival there with my boyfriend and we took a lot of interesting photos there. About one week ago, one of my friends asked me to show her the photos. However, it turned out to be inaccessible and the PC can not read the data on the drive. And the PC suggested me to format the external hard drive for reusing it again.
people often lose their data from External hard drive, a handy external hard drive data recovery software will be highly recommended to you, ---- EaseUS Data Recovery Wizard
Launch EaseUS Data Recovery Wizard, Then click next button
Select the disk where you lost your data and click Scan button, the software will quickly scan the selected disk to find your target files.
Watch the video below, step by step, you can recover your data.
https://youtu.be/ZA4XzL1mD1s

Recover data from external hard drive that was Windows format and connected on a Macbook Pro. Did I lose everything? What happened?

Hi there this is my first question here!
I connected my external hard drive originally formatted on PC on my new Macbook. The first time I connected it I could see all my files but today I connected it and after I couldn't see any file nor even on my pc appears as NO NAME with a different name and nothing on it. I think was reformatted, any help to recover all my data?
It's really important stuff for me

If the Apple Store couldn't get files off of the drive, it is unlikely that you will be able to. If you have backups, those would be the best way to go. You could also try booting up the computer and holding down T to boot into Target Disk Mode. Plug the broken computer into another one with FireWire and see if it works to recover data from external hard drive. If you can see it, try booting up the broken computer while holding down Option. Choose Recovery HD from the menu, then choose to Reinstall OS X.
It is unlikely that this will work, because I'm pretty sure that the Apple Store would have tried this. You could try using expensive software to get files off the drive, but it would be risky and the results might not be any good.
https://discussions.apple.com/docs/DOC-4273

How can I move my project from external hard drive to my macbook pro?

How can I move my project from external hard drive to my macbook pro? every time I try to do some editing, the sequence is very slow, thanks in advance

Try here...
Setting-up a new Mac from an old one, its backups, or a PC

Restoring itunes from external hard drive

-I used WD backup program to store itunes on external hard drive
-hard drive on mac pro crashed, replaced hard drive
-trying to restore itunes songsa from external drive and when I copied songs from external hard drive to new internal hard drive which has itunes program, only song titles appear and track number for songs I ripped from CDs. All info is present for songs I purchased from itunes (why is there a difference in the way these two are restored???)
-Can I restore itunes from external drive so that artist and album are associated with each song title I ripped from CDs?
Much appreciate all assistance. Thanks.

I know MP3 and AAC save tag data, and I believe AIFF does as well (if you want to keep them in full-quality but space-greedy format). I don't think WAV supports tagging which is why they were lost. Read:
http://discussions.apple.com/thread.jspa?messageID=9558241&#9558241
This time make sure you have a complete backup of your itunes folder (which, in fact you may still have). That way you can recover your complete library and everything intact (as long as you keep your backups up to date).
Here is a related topic
http://discussions.apple.com/thread.jspa?messageID=9267109&#9267109

Importing photos from external hard drive.

I had stored my photos on a external hard drive from power book G4(which had iphoto4.0.3).
I recently purchased IMac G5. I cannot import my photos into G5(has iphoto5.4) from external hard drive. I get a message saying you have installed a new version of iphoto.
How can I get my photos back on the new machine?
Thank you in advance.

Shyman
Had another idea. Since you were not upgrading a computer to iPhoto 5 - which would upgrade your existing iPhoto Library Folder (database) and since you, I presume, already have a working iPhoto 5 Library Folder -- perhaps we have to trick iPhoto into doing the upgrade.
Quit iPhoto5. Move to the desktop or rename the existing iPhoto 5 Library Folder.
But also move or delete the existing iPhoto 5 preferences file:
You will find it in your Home directory:
(Home/your account) >Library>Preferences>com.apple.iPhoto.plist
Remove or trash the preference (.plist file) and restart iPhoto.
This will get iPhoto 5 to launch like it was the very first time. With only the backup in your Pictures Folder it will try to open with it and do the upgrade.
Peter

Importing iphoto from external hard drive

I was wondering if importing 4 gigs of photos takes longer than 30 minutes to import from external hard drive. The iphoto status after importing still shows "working" as the bar graph "charges" continuously. Does this mean it is still importing? Should it show any other info such as the number and title of photos being imported? Should I stop it after awhile and try a new method of importing? Help.

maxus2:
What method are you using, the copy files or use aliases? I imported 14,000+ files from my second HD and it took between one and two hours, I don't remember exactly as I was doing it 10-12 folders at a time. I was using the alias method thus giving me an 8G library folder on my boot drive for about 25.5G (14,100) of image files. See my reply in this thread, http://discussions.apple.com/thread.jspa?threadID=327144&tstart=0, more some more thoughts on the alias method.

Transfering Music from external hard drive

Thought I copied music files from external hard drive to new computer sucessfully, but when I try to play music on computer I get an error message telling me that the original file can't be found and do I want to locate it. Looks like everything is there, artwork, playlists, but can't play. Help. Thanks!!!

Hi,
These Links may be just what you are Looking for...
iTunes on External Drive
http://support.apple.com/kb/HT1751
Moving your iTunes Media Folder
http://support.apple.com/kb/HT1364
Cheers,

Copy Data from external hard drive to tc via usb

how do iCopy Data from external hard drive to tc via usb

you can't - unless you're willing to void your warranty by removing the TC's HD from the device, put it in an external enclosure, and connect that to your computer.

Install data from external hard drive?

Hi, we have our old macbook data saved on external hard drive (old laptop had water damage but able to retrieve data). I now have new macbook, how do I install data from external hard drive to new macbook? Is it super easy? I didn't want to set up new laptop until I could understand how to install all our old data. Thanks

Do you have the appropriate cable to connect the external drive to to new Macbook?
If you do, the rest is easy. Connect the drive and start up the new Mac. The first steps in the setup will be to enter information about yourself, etc. etc. As you proceed you will be asked if you want to bring in data from another place. Just follow the directions, and the Mac Setup Assistant will do everything for you.
The critical part is making sure the external is corectly connected to the new computer.

Hard drive replaced on imac how to restore data from external hard drive

Hard drive crashed, replaced by authorized dealer. Need to transfer all data from external hard drive to repaired computer.

http://web.me.com/pondini/Time_Machine/14.html
See especially C.

How to full restore from external hard drive backup

I'm a new MAC user and got myself in a mess where i need to perform full backup restore from external hard drive. Last back via time machine to external drive was 2 days ago, so the data is there.
What are the MAC boot commands to get me to system restore options. And there any useful tips you can pass on.

http://www.macworld.com/article/1165784/how_to_restore_data_from_time_machine.ht ml

Recovery from External hard drive

Similar Messages

Maybe you are looking for