Recovery HD (made on flash USB)

HI
yesterday I made a recovery HD on my portable flash, but unfortunately I have forgotten that I have some files in it, now I can not access them.
My question is how can I accees inside the flash again, I tried it attaching to a windows PC too but I encounter this message : you must format it.
please send me the way if you know.
thanks in advance
Behshad

jamesdee wrote:
Thank you very much for the prompt reply.
Before I follow your advice I just want to be sure that my recovery set is good.
The HP Suppprt Assistant has a red exclamation mark and when I open it it tells me 
that I need to create a recovery set. I think I have a recovery set but how do I confirm
that without compromising the whole recovery.
Thank you so much for your help.
jamesdee
I think you try doing the recovery from the recovery partition present in your system itself before going for USB method, by opening up HP Recovery manager , just go through the link I gave above for the process,
For you doubt regarding whether the USB would work properly, that can only be tested by making it boot & see,
If you've got the message as Recovery media successfully created after finishing, there is nothing to worry.
With regard to the message you're getting in HP Support Assistant, I suggest you uninstall it from Control Panel & reinstall HPSA from your product site.
Thanks,
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Similar Messages

  • NB305-02P Attempt to create recovery media damaged format of USB drive?

    Twice now, I've tried to created a recovery record using 16 Gb USB drives. Different makes of drive, one I have been using previously on an XP computer, works fine there. In both cases, the attempt to create the recovery record resulted in a USB drive that was unusable. The Creator program calls for the re-format of the USB drive, that fails, and then the drive is indicated in Windows as having zero capacity, plus it cannot be re-formatted by any method I've tried so far.
    What I'd like most, of course, is a way to repair the failed drives. Failing that is there a specific method I can use, with a new drive, to avoid this problem?
    Thanks for any help!
    Larry Van Wormer

    Hi egrivel,
    As stated above, there is no option to create optical recovery media.  You can use a flash drive.  8G 16G I believe, but verify that when running the utility.  Make sure "copy the recovery partition" is checked.
    Methodology to create Recovery Media and reload a Lenovo system with Microsoft Windows 8 preload
    Z.
    [edit] 16G flash drive size.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Recovery from recovery discs made with recovery manager on g62

    I got the blue screen of death and had to do a system restore for my hp g62 laptop. Before i restored the computer, the recovery manager launched and had me backup my files. I backed up the system on like 15 discs using hp"s recovery manager. After it was done, i returned the computer back to factory settings. Now, im having a problem using the recovery discs made thru the recovery manager. The files arent being read. I tried to copy them and move them onto the hard drive....and they are all saved as .wim files....which arent read by anything. So i have all my files backed up, but that arent opening. How the hell do i open my files that i backed up? How do i put my files back on the computer?

    Hi,
    I've never really used the HP File Recovery system, but you can open an Image file as follows.
    Download and install 7-Zip from the following link.
    http://www.7-zip.org/
    When installed, right click on the .wim file, select 7-Zip, select Extract Files and click Ok - your files should be in the newly extracted folder.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • .avi animations made with Flash won't work on my mac laptop (version 10.6.8) ...

    .avi animations made with Flash won't work on my mac laptop (version 10.6.8) but they used to. What is the problem?

    let me be more specific, the .avi animations will not play in Quicktime on this laptop, but they used to. When I import them into final cut express they won't show up there either. What should I do to fix this?

  • How to tell a swf file in web was made by flash or flex?

    the swf file in web, how to tell it was made by Flash or
    Flex? accurately!

    Im not sure, but I would think that right now the main way to
    tell the difference would be to find out if it requires Flash
    Player 8.5 or not. Currently, Flash swfs only go to 8.0. Another
    way is to look at the source of the HTML file. I notice that Flex
    puts an incredible amount of code into the HTML file.
    Thia

  • Illustrator shows BG error when importing ai files made in Flash

    Hello Everyone!
    I've been using Flash for a couple of years now... I use it
    mostly for designing fashion graphics (!!!). I know that
    Illustrator is excellect for creating artwork, but I am a big Flash
    fan and can't help it :) Of course, I have to use Illustrator from
    time to time which makes it a bit tricky when importing modified
    Flash files.
    I export Flash files as AI ones, but encounter numerous
    errors while opening such files in Illustrator. I think the problem
    is with the Color settings. Flash uses RGB, and CMYK is
    Illustrator's default settings. When I try to export a graphic
    symbol (with layers, groups of objects and simple shapes) from
    Flash Professional as an AI file, it always exports as Illustrator
    6.0 version (wonder why)... Then I try to open this file in
    Illustrator CS2 and always get a "BG" error message which is
    similar to this one:
    Can't open illustration. The illustration doesn't have the
    correct number of operands for an operator.
    Offending operator: "Bg"
    Contex:
    Bb
    0000 Bh
    1.0.0.000819.20.....etc. (lots of figures)...Bg
    So after getting such a message and pressing "OK" there are 2
    possible results:
    1. The program (Illustrator CS2) opens a blank artboard
    (stage) with absolutely NO objects or symbols on it.
    2. The program opens an incomplete graphic on the artboard
    (stage) with many missing objects and shapes (say, if I exported a
    graphic with 2 layers, the top layer will be missing).
    Unfortunately, these are the most common results....Though a
    few days ago I hkept several AI files open and tried to export an
    AI file made in Flash. To my greatest surprise Illustrator could
    open the file with absolutely everything I exported from Flash!!!
    Except for Bitmap fills, of course....But everything else was just
    perfect! I was amazed no end!
    Like an idiot I didn't save the file, and the next day I
    spent 2 hours trying to get the same result...which I didn't. Never
    did since then...Though I used the same graphic over and over...
    So my question is...What settings should I have in order to
    be able to open AI files exported from Flash? If I got it once, it
    means it is possible to open such files...
    I would greatly appreciate if anybody could help me find a
    way out of this situation. I have to use Illustrator more often
    now, and I need my artwork to be convered to AI files without
    significant modifications or corrections... Is it doable?
    Thank you so much in advance!!
    Ella

    Did you ever find a solution to this?
    I need to export characters from Flash files to use in Illustrator, but I keep getting "offending operator bg" messages.

  • Qosmio F30-140 - How to use Flash USB boot option?

    Dears,
    After I update my laptop BIOS, when I start my laptop I find new boot method, it is from Flash USB ?:| How can I use it and what type of file must be in it? I mean .iso or what?
    Thanks

    Hi
    I dont have Qosmio F30 so I cant test it for you but I think this options means that you can boot from an USB stick for example. Have you checked this?
    You cant boot from an iso file because you must create a bootable media. For example a Windows start disc or a Linux version that you can boot from USB stick.

  • Flash USB destroyed or died after using on my Mac Book

    Today my Kingston Flash USB pen drive (16GB) died after i eject it from my Mac Book Pro 15" Retina / OS X Mavericks. Now its not recognized when i plug it, and i cant see it on "Disk Utility" and when i plug it on Windows its installing the kingston drivers but there is nothing... :/ what should i do i have very important files on my pen drive

    Sounds like that thumb drive has failed. Personally I have 3 Kingston USB thumbs and I will never buy another from them. some of the worst bthumb drives I have ever owned.
    If the drive has failed your files are gone. No easy way to retrieve files from flash storage. Next time have backups of important files.

  • Problems installing CS4 by flash/USB drive

    I purchased the DVD-Roms late last year to install CS4. The programs successfully installed on my laptop, which recently died and is in the shop. But I never was able to install them on the desktop and would like to do so. When I put the DVDs into my DVD reader (which doesn't normally have problems reading things), it grinds away but cannot read the disks. My attempted solution was to copy the programs on a USB drive. In disc 1 I selected "autoplay" and most of the programs are installed but still not useable until I can get the second disc to also install.
    Now I have a message, "Please insert Adobe CS4 Design Premium into drive E:\ to continue installation.
    - If I put the application disc 2 in the drive, it revs but does not actually read the disc.
    - On the USB folder sitting on my desktop for Application 2, my options are:
         -- extensions
         -- payloads
         -- autorun (Which sounds good. But I click on it and it just opens a text editor that says [autorun] icon=cs4_designprem_disc.ico)
         -- cs4_designprem_disc (Opens to show an icon/graphic)
    This is not a space issue because last time, I downloaded the "trial version" of CS4 from the website when it was available and then would manually enter my serial number. I wiped the hard drive. Now customer support says there are no links available online to CS4 since CS5 is soon available.
    Any suggestions on how to get application disc 2 installed too, from the USB drive if possible?

    Download on the iMac OS X Recovery Disk Assistant v1.0 and create a USB recovery disk.
    Use that USB disk to boot your MBP retina.
    Use the Terminal, that you find inside the recovery environment, to perform these commands
    Verifiy that the main internal disk is labelled /dev/disk0
    diskutil list
    this command will completely erase the internal disk. Please change /dev/disk0 if your is different, (it should not).
    diskutil eraseDisk jhfs+ "Macintosh HD" GPT /dev/disk0
    Verify that you just have 3 partition, no more Recovery HD partition
    diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *500.1 GB   disk0
       1:                        EFI                         209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh HD            499.2 GB   disk0s2
    Quit Terminal and proceed with Reinstall Mac OS X
    It'll take a lot of time, depending on the speed of your internet connection.
    Please, do not hesitate to ask if you are in doubt

  • Import a video player made in flash cs4 into flash builder 4

    I want to import a video player made in flash cs4 into flash builder 4. Are there any pitfalls that i should be aware of?

    pdf is not a supported file type in flash.

  • Fla written made in Flash MX/AS1 jerks when published in Flash8/AS2

    Have an old fla written made in Flash MX/AS1 which run OK.
    Opened it in Flash-8, changed publishing settings from AS1 to
    AS2.
    The resulting SWF runs jerking.
    What might be the reason?

    It works, but slowly as if somer AS1 code is interpreted into
    very
    ineffective machine code by AS2 interpretor
    My question was if it is know which particular AS1 features
    have these
    problems in AS2
    "ggshow" <[email protected]>
    ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ
    × ÎÏ×ÏÓÔÑÈ
    ÓÌÅÄÕÀÝÅÅ:
    news:f17r79$efu$[email protected]..
    > some AS1 not working when the movie run in AS2...
    > if you want to publish it as AS2, then write it in AS2.
    >
    > * it is time to learn AS3
    >

  • How to know for sure something was made in Flash?

    If you right-click on a game of movie in a website and see a box with the bottoim line "About Adobe Flash Player..." does that necessarily mean that the content was made with Flash (Either Flash Pro, Flash Builder, FDT, Flash Develop)?
    Does it mean that the creators for sure used AS3, or could you in thery have an html5 or union project running in flash player?

    There may not be actionscript in a program per se but when it creates swf it must abide by swf rules to at least create a proper wrapper so that final outcome is perceived by the Flash plugin as something native. I will try it later but I am pretty sure it will have a lot of ActionScript code because Flash pluging is just a library of ActionScript classes from this perspective.
    Because SWF is an open source (sort of) I am sure there are tons of programs that will convert things to swfs with different level of success.
    If you are interested in other that Adobe provided compilers - you may want to start with OpenSWF forum:
    http://forums.adobe.com/community/flash/flash_openswf

  • How to make a menu bar made is flash cs5 go to an html page

    so i am making a website in Dreamweaver cs5 and i am going to be importing a .swf animation for the menu bar i made in Flash. how do i make an action in Flash direct to a page of my website in Dreamweaver for example the index.html file of my web page.
    right now i have an actions layer with a stop(); command on the last frame of the animation i want to add a command under that, that will take the user to the index.html page of my website when the button is clicked. I have the button already made as well as the animation all i am missing is the code to go to the index.html page.

    in ActionSscript 2 it would be something like:
    myButton.onRelease = function(){
      getURL("http://mywebsite.dk", "_parent");
    in AactionScript 3.0 it would be something like:
    myButton.addEventListener(MouseEvent.CLICK, onButtonClick, false, 0, true);
    function onButtonClick(e:MouseEvent):void
      var url:String = "http://mywebsite.dk";
      var request:URLRequest = new URLRequest(url);
      navigateToURL(request);
    See if some of that, does the trick for you.
    /ockley

  • Please could you help my iphone 5 is stuck while in recovery mode, there is a USB sign and an arrow is pointing to itunes symbol, with the Itune red logo symbol

    Please could you help my iphone 5 is stuck while in recovery mode, there is a USB sign and an arrow is pointing to itunes symbol, with the Itune red logo symbol

    Hi Turn iPhone off Connect lead to USB on your PC Press & hold power button down on iPhone  don't let go Connect lead to iPhone keep button pressed until PC sees iPhone then wait for restore . Cheers Brian

  • My iphone is in recovery mode, the itunes and usb cable symble, is all data lost at this point or is it possible to recover some or all data on the phone?

    My iphone is in recovery mode, the itunes and usb cable symble displayed, does this mean that all data is lost or is there some way to recover the data on the phone.

    Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
    http://support.apple.com/kb/HT1414

Maybe you are looking for