Recovery help needed for Equium A300D-13X

Hi all,
After experiencing too many problems to list with my Equium A 300D 13X, both hardware and software, I decided to go ahead with a complete restoration to factory settings.
My first step was to create 2 dvd recovery discs, using the Toshiba recovery disc creator.
As far as I can tell, both recovery disc's were successfully created, insofar as the recovery disc creator said as such.
Not knowing what step to take next, I started the laptop with the fist of the two recovery disc within the disc drive, thinking this would reset the laptop to it's factory settings, however it did not.
Now when I start up the laptop I get the following message;
BOOTMGR is missing
Press Ctrl+Alt+Del to restart
which restarts the laptop again displaying the above message.
Pressing F8 on start up does nothing.
Pressing F12, multi boot selection, brings up a Boot Menu with 3 options;
HDD1: TOSHIBA MK2046GSX-(S1)
CD/DVD: MAT****ADVD-RAM UJ-850S-(PM)
LAN: Marvell Yukon 88E8040T
If I select the CD/DVD option, a black screen with the text ;
Windows is loading files
is shown. I'am guessing this is the correct path to recovery,
however after the following recovery utility screens regarding language selection etc, a text filled dialogue box
X:\windows\systems32\cmd.exe
runs through, but ultimately becomes static at the line:
Copying F:\06948XSP.swm to V:\HDDRecovery\SWImg 1/6
without successfully finishing the recovery process.
Any help in resolving this problem would be greatly appreciated.
Kind regards,
Kev.

> My first step was to create 2 dvd recovery discs, using the Toshiba recovery disc creator.
> As far as I can tell, both recovery disc's were successfully created, insofar as the recovery disc creator said as such.
What to say buddy you have done everything correctly.
The recover disk has been created successfully (did you see a message saying this??).
Booting from recovery disk should start the recovery procedure and you should follow the installation on the screen.
Usually this should function.
The error; BOOTMGR is missing says that boot manager on HDD has been deleted and its not possible to boot from HDD.
You should boot from CD as you did; pressing F12 choosing CD/DVD drive
Try to format the HDD again using another Windows CD.
In such case you will need to set SATA mode to compatible in BIOS and then you could boot from WinXP CD.
After that try the recovery disk again

Similar Messages

Equium A300D-13x stucks on installation screen

I recently sent my laptop (Equium A300D-13x) back to Toshiba to be repaired as it was overheating and cutting out.
It came back today and when I turned it on I got the screen where I was asked if I wanted to go into safe mode or start Windows normally.
Then it goes to a screen where it says, *Finishing the installation may take several minutes.
Please do not interrupt or shutdown the computer!*
I've been waiting all day now and I'm still stuck on this screen.
Has anyone had the same problem? And if so, how can I fix it?

Hi
Ive recovered my notebook many times and the installation went always troublefree.
But of course such installation issue could happen always and I think you should simply repeat this procedure.
If you dont have Toshiba Recovery disk then try to recover the notebook using the HDD recovery option.
Just press F8 while notebook powering up.
Then choose Repair my computer. Then a new window will appear and you could select the new option called Toshiba HDD.
Check it out!

Equium A300D-13X: Cannot open Amyuni Document Converter 2.10

I have a Toshiba Equium A300D-13X on which I've installed Family Tree programme.
When I open the programme it tells me it cannot open Amyuni Document Converter 2.10 Kernel Mode Print Driver.
Does that mean I have to buy that PDF programme or is there something else I can use.

Hi
First of all this issue has nothing do with your notebook but with an 3rd party application which you have installed on the A300D notebook.
So Im wonder why you post this here in the Toshiba forum
Anyway Ive googled a little bit for details about Amyuni PDF Converter and found out that this is a tool which converts every windows document into the PDF format.
In you case I would recommend searching in the web for this application and to download and to install the print driver which belongs to this Amyuni PDF Converter software.
Good luck

Help needed for writing query

help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2           02           Computer Science
3           03           Physics
4           04           Chemistry
5           05           Mathematics
7           07           Commerce
8           08           Computer Applications
9           09           Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383           S1      9           4           2           3
384           S2      4           2           5           3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383           S1
384           S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1               383          9
2               383          4
3               383          2
4               383          3
5               384          4
6               384          2
7               384          5
8               384          3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
383     S1     Biology Chemistry      Computer Science Physics
384     S2     Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID     subjects
383           Biology,Chemistry,Computer Science,Physics
384           Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --Pradeesh

Well I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say.

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

File missing (file\BCD error code 0Xc0000034 help need for work!

file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pc

Hi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Help need for force to signout All session ! how...

hi
help need for force to signout All session ! how ??
Solved!
Go to Solution.

Hi and welcome to the Skype Community,
To force a signout of all instances your Skype is signed into please change your password: https://support.skype.com/en/faq/FA95/how-do-i-change-my-password
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Equium A300d-13x - Media buttons suddenly stoped working

I am using an Equium A300d-13x toshiba laptop and the led media control touch panel suddenly stoped working
What shuld i do?

Hi
Did you install some 3rd party tools like Virtual Machine or Virtual PC or similar?
Such tools affect the multimedia buttons and could disable the functionality!
Otherwise there is something wrong with the operating system.
Possibly some registry keys or files are wrong, damage, etc
You could try to clean the OS using CCLeaner before you would install the VAP again.
This should be tried out.

Recovery Disc need for

Laptop has a Black screen 2 flashes at the caps key, tried all the suggestions on the forum nothing is working.
Sadly I dont have a recovery disc.
help needed please, where can I get one are they readily in stock?
Thank you

Hi there:
You can try Recovery using the built in Recovery partition present in HDD unless you've formatted or upgraded your laptop:
http://support.hp.com/us-en/document/c01867418
The only other option left is to CLEAN INSTALL Windows 7 if your laptop came with Windows 7 pre installed & you can CLEARLY & LEGIBLY read all the 25 characters of product activation key printed in COA sticker on the back of the laptop:
http://www.sevenforums.com/tutorials/219487-clean-reinstall-factory-oem-windows-7-a.html
http://www.w7forums.com/threads/official-windows-7-sp1-iso-image-downloads.12325/
From your specs: http://support.hp.com/gb-en/product/HP-G56-100-Notebook-PC-series/4247525/model/4315390/document/c02...
I could understand that it came with Windows 7 Home Premium 64-bit, so you can download the ISO from tutorial link given above and make bootable USB - which can be booted from and clean install done.
Additional drivers can be downloaded, copied to another usb and later on installed to system after clean install.
http://support.hp.com/gb-en/product/HP-G56-100-Notebook-PC-series/4247525/model/4315390
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Query help needed for querybuilder to use with lcm cli

Hi,
I had set up several queries to run with the lcm cli in order to back up personal folders, inboxes, etc. to lcmbiar files to use as backups. I have seen a few posts that are similar, but I have a specific question/concern.
I just recently had to reference one of these back ups only to find it was incomplete. Does the query used by the lcm cli also only pull the first 1000 rows? Is there a way to change this limit somwhere?
Also, since when importing this lcmbiar file for something 'generic' like 'all personal folders', pulls in WAY too much stuff, is there a better way to limit this? I am open to suggestions, but it would almost be better if I could create individual lcmbiar output files on a per user basis. This way, when/if I need to restore someone's personal folder contents, for example, I could find them by username and import just that lcmbiar file, as opposed to all 3000 of our users. I am not quite sure how to accomplish this...
Currently, with my limited windows scripting knowledge, I have set up a bat script to run each morning, that creates a 'runtime' properties file from a template, such that the lcmbiar file gets named uniquely for that day and its content. Then I call the lcm_cli using the proper command. The query within the properties file is currently very straightforward - select * from CI_INFOOBJECTS WHERE SI_ANCESTOR = 18.
To do what I want to do...
1) I'd first need a current list of usernames in a text file, that could be read (?) in and parsed to single out each user (remember we are talking about 3000) - not sure the best way to get this.
2) Then instead of just updating the the lcmbiar file name with a unique name as I do currently, I would also update the query (which would be different altogether): SELECT * from CI_INFOOBJECTS where SI_OWNER = '<username>' AND SI_ANCESTOR = 18.
In theory, that would grab everything owned by that user in their personal folder - right? and write it to its own lcmbiar file to a location I specify.
I just think chunking something like this is more effective and BO has no built in back up capability that already does this. We are on BO 4.0 SP7 right now, move to 4.1 SP4 over the summer.
Any thoughts on this would be much appreciated.
thanks,
Missy

Just wanted to pass along that SAP Support pointed me to KBA 1969259 which had some good example queries in it (they were helping me with a concern I had over the lcmbiar file output, not with query design). I was able to tweak one of the sample queries in this KBA to give me more of what I was after...
SELECT TOP 10000 static, relationships, SI_PARENT_FOLDER_CUID, SI_OWNER, SI_PATH FROM CI_INFOOBJECTS,CI_APPOBJECTS,CI_SYSTEMOBJECTS WHERE (DESCENDENTS ("si_name='Folder Hierarchy'","si_name='<username>'"))
This exports inboxes, personal folders, categories, and roles, which is more than I was after, but still necessary to back up.. so in a way, it is actually better because I have one lcmbiar file per user - contains all their 'personal' objects.
So between narrowing down my set of users to only those who actually have saved things to their personal folder and now having a query that actually returns what I expect it to return, along with the help below for a job to clean up these excessive amounts of promotion jobs I am now creating... I am all set!
Hopefully this can help someone else too!
Thanks,
missy

Help needed for using BASIC authentication through JDBCRealm

Help needed.
Hello,
I am doing a degree project, so far it works fine in my local machine, I need to try it on my virtual hosting (as it is a live server).
My project requires JDBCRealm, that is BASIC authentication loading access data from mysql database. Normally this setup can be done in Server.xml file, because my Tomcat hosting is a virtual one, I only have permission to access the web.xml file.
My question is: is it possible to get it done in an alternative way? In web.xml? Some properties file maybe?
Thank you very much.

You can set this up for your context using META-INF/context.xml instead of working with server.xml.
Make a directory called META-INF under your webapp ( it'll be at the same level as WEB-INF ). Under this, add a context.xml with all your context specific configuration including the realm. A sample is below
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/myApp" reloadable="true">
    <Realm
        className="org.apache.catalina.realm.JDBCRealm"
        driverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
        connectionURL="jdbc:microsoft:sqlserver://127.0.0.1:1433;DatabaseName=myDB;SelectMethod=Cursor;"
        connectionName="username" connectionPassword="password"
        digest="MD5" userTable="users" userNameCol="userid" userCredCol="userpassword"
        userRoleTable="user_roles" roleNameCol="rolename"
    />
</Context>Hope this helps.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
----------------------------------------------------------------

Help Needed for T42 Start-up Problem

Urgent help need!!!
I have a ThinkPad T42 with Windows XP installed. It works perfectly for a while without ever have any problem or error message. Then suddenly it won’t work anymore. The symptom is following:
After power on the laptop the Microsoft window would show up and it prompt me for window logon password. After I type in the password it then shows “window is loading your personal setting”. After a long while nothing would show up on the screen other than the background of the normal screen. There is no window bar at the bottom or any icon on the screen. If I start in safe mode then everything would show up. I don’t know what is going on.
This happened two months ago and I ended up restoring a backup image to get it work again. It happens again today with the same symptom. I am really tired of having to restore image backup every 2 months.
I would really appreciate it if any of your experts can offer me some insight into this problem. I am desperate in need of help.
Thanks very much!

wangy26, welcome to the forum,
Have a look at this thread to see if my post there helps. The problem seems to mostly occur at the start of a month, why I don't know. Unfortunately the member didin't report back whether or not this was a viable solution for them.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Help need for badi method me_process_po_cust~check

Dear All expert
Pl see following thread
I am stuck
Help needed
http://scn.sap.com/thread/3610303

See the issue here is HOLD feature in PO should not be there if it meets the error condition.
For this you can refer another BADI for this purpose ME_HOLD_PO.
Refer one of my previous threads below , it might be helpful :
Held Purchase order need not be created.
Reiterating a thread related to same topic is not a good practice.

XMLAGG structure, performance help needed for odd nesting in schema

Hello,
I have to produce XML to look like:
<?xml version='1.0'?>
<enterprise>
    <membership>
      <sourcedid>
        <id>PHYS_101_001_FA2007</id>
      </sourcedid>
    
    <member>
      <sourcedid>
        <id>D2LU0001</id>
      </sourcedid>
      <role roletype="Sample Role">
        <status>1</status>
      </role>
    </member>
    <member>
      <sourcedid>
        <id>D2LU0002</id>
      </sourcedid>
      <role roletype="Sample Role">
        <status>1</status>
      </role>
    </member>
</membership>
</enterprise>This would be straightforward if the schema allowed for a "<members>" tag under which to nest the <member> tags. But, it does not allow for that tag or any other than those listed above.
I have a query which does produce that output (except for the roletype attribute), but its performance is horrible; it takes about 40 minutes to return data:
SELECT
     XMLROOT(
         XMLELEMENT("enterprise",
           XMLAGG(
             XMLELEMENT("membership",
               XMLFOREST( XMLELEMENT("id",cx.mapped_course_id) as "sourcedid"
               (SELECT XMLAGG(
                 XMLELEMENT("member",
                   XMLFOREST(XMLELEMENT("id",spriden_id) AS "sourcedid",
                             XMLELEMENT("status",'1') AS "role"
                  FROM enrollments_fall_sfrstca efs
                     , spriden sp
                     , gzv_tuid t
                 WHERE sp.spriden_change_ind IS NULL
                   AND sp.spriden_pidm       = t.pidm
                   AND t.tuid                = efs.user_name
                   AND efs.mapped_course_id = cx.mapped_course_id
                   AND efs.term              = cx.semester
            , VERSION '1.0', STANDALONE NO VALUE)
FROM courses_xt cx
WHERE cx.semester = :term_code
;Similar queries are producing courses and users XML fine with no performance issues, but these are driven off either the courses view or the enrollments view, but not both.
Is there some other way I can produce the nesting I need for the vendor's schema?
The source views are basically as follows (showing relevant columns only):
courses_xt:
MAPPED_COURSE_ID       SEMEST
AVFT209-13307-201210   201210
AVFT210-13308-201210   201210enrollments_fall_sfrstca:
MAPPED_COURSE_ID       USER_NAME
AVFT209-13307-201210    FULLERC8
AVFT209-13307-201210    SHUPEK
AVFT209-13307-201210    NOMAN
AVFT210-13308-201210    SHUPEK
AVFT210-13308-201210    PELLONMWhen I have the query without the XML (with the subquery as a column of the outer query), this returns the correct data quickly (a couple of minutes).
I have tried various permutations of XMLFOREST, XMLELEMENT, XMLAGG but either I get syntax errors, or the data is wrong (e.g. repeated '<membership>' for each '<member>', or I have to create an invalid tag '<members>' to be filtered later).
Please advise!
Thanks,
Anita Lees

Hi Anita,
Have you tried with a GROUP BY and no subquery?
Here's an example using SCOTT schema.
I've used the same tag names and structure so that you can see the analogy :
SELECT XMLElement("enterprise",
         XMLAgg(
           XMLElement("membership",
             XMLElement("sourceid", xmlelement("id", d.deptno))
           , XMLAgg(
               XMLElement("member",
                 XMLElement("sourceid",
                   XMLElement("id", e.empno)
               , XMLElement("role",
                   XMLAttributes(e.job as "roletype")
                 , XMLElement("status", '1')
FROM scott.dept d
     LEFT OUTER JOIN scott.emp e ON e.deptno = d.deptno
WHERE d.deptno IN (10,20)
GROUP BY d.deptno
;which gives :
<enterprise>
<membership>
    <sourceid>
      <id>10</id>
    </sourceid>
    <member>
      <sourceid>
        <id>7782</id>
      </sourceid>
      <role roletype="MANAGER">
        <status>1</status>
      </role>
    </member>
    <member>
      <sourceid>
        <id>7934</id>
      </sourceid>
      <role roletype="CLERK">
        <status>1</status>
      </role>
    </member>
    <member>
      <sourceid>
        <id>7839</id>
      </sourceid>
      <role roletype="PRESIDENT">
        <status>1</status>
      </role>
    </member>
</membership>
<membership>
    <sourceid>
      <id>20</id>
    </sourceid>
    <member>
      <sourceid>
        <id>7369</id>
      </sourceid>
      <role roletype="CLERK">
        <status>1</status>
      </role>
    </member>
    <member>
      <sourceid>
        <id>7902</id>
      </sourceid>
      <role roletype="ANALYST">
        <status>1</status>
      </role>
    </member>
    <member>
      <sourceid>
        <id>7566</id>
      </sourceid>
      <role roletype="MANAGER">
        <status>1</status>
      </role>
    </member>
</membership>
</enterprise>

Help needed for grouping.

Hi,
    Help needed .
I have an internal table having 6 .
Ex :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 10    10
a     aa    12    p1 20    20
b     aa    11    p2 30    30
b     aa    12    p2 40    30
Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
To Display :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 30    30.
b     aa    11    p2 70    60.
can anyone help me.How to do this..?
Thanks

Here you go
DATA:
BEGIN OF cur_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(2)     TYPE c,
    f6(2)     TYPE n,
END OF cur_tab.
DATA:
BEGIN OF sum_tab OCCURS 0,
    f1        TYPE c,
    f4(2)     TYPE c,
    f5        TYPE p,
    f6        TYPE p,
END OF sum_tab.
DATA:
BEGIN OF final_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(5)     TYPE c,
    f6(5)     TYPE c,
END OF final_tab.
START-OF-SELECTION.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '10'.
cur_tab-f6 = '10'.
APPEND cur_tab.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '20'.
cur_tab-f6 = '20'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '30'.
cur_tab-f6 = '30'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '40'.
cur_tab-f6 = '30'.
APPEND cur_tab.
LOOP AT cur_tab.
    MOVE-CORRESPONDING cur_tab TO sum_tab.
    COLLECT sum_tab.
ENDLOOP.
LOOP AT sum_tab.
    READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
                                f4 = sum_tab-f4.
    IF sy-subrc NE 0.
      WRITE:/ 'Something went very wrong'.
      CONTINUE.
    ENDIF.
    MOVE-CORRESPONDING cur_tab TO final_tab.
    MOVE-CORRESPONDING sum_tab TO final_tab.
    APPEND final_tab.
ENDLOOP.
LOOP AT final_tab.
    WRITE:/1 final_tab-f1,
          AT 5 final_tab-f2,
          AT 10 final_tab-f3,
          AT 15 final_tab-f4,
          AT 20 final_tab-f5,
          AT 25 final_tab-f6.
ENDLOOP.
and the output
a   aa   11   p1     30   30
b   aa   11   p2     70   60

Recovery help needed for Equium A300D-13X

Similar Messages

Maybe you are looking for