Recovery issue: did not disconnect external devices

and now none of my drivers are working, missing drivers, and catalyst control center is not adaptable to graphics card, this is a short list of my probles. but when i left my mouse in the usb port and ran image recovery it dismounted hdd, they sent me a clean hdd new and i used recovery again but i didnt know i still had memory problems, this might be a cause, when i run minimized recovery it works i wont get any messages but when i use factory recovery the computer will start in 800x600 and thats y i know i have a malfunction. ran mem and hdd test alreaady, think i had a bad recovery from when i had bad memory?

If you are sure your memory is good now, would it be a good idea to run the recovery again?
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Similar Messages

How do I get iTunes to recognize a new device if I accidentally did not hit new device when I first hooked it up? I hit the button that said I wanted to back it up from my old info

How do I get iTunes to recognize a new device if I accidentally did not hit new device when I first hooked it up? I hit the button that said I wanted to back it up from my old phone. The new phone is my husbands and I don't want to back up my phone info on it. I re connected it hoping it would prompt me with the option again and it doesn't , it just shows up as a back up to my phone. How can I get it to give me that option in the beginning again

First of all, I think the first time you sync an iPod that's formatted for Windows on a Mac, the sync process reformats it for Mac. You can check what it is now by looking for the iPod with Disk Utility. If it's Mac OS Extended, it's formatted for Mac already.
Also, there is no current iPod updater app these days. iTunes handles it through the Restore button. If you are not able to use the latest iTunes because of your Mac, I can understand. The latest version of iTunes should run with 10.3.9 or later, if the hardware can handle it.
You said the battery was low so let it recharge for a while.
You should also reset the iPod. It's part of the 5Rs, which you should go through as the starting point for iPod trouble-shooting.
http://www.apple.com/support/ipod/five_rs/wheel/

HT1386 When I sync my iPhone5 with my Macbook Pro I get the following message "iTunes could not sync calendars to the iPhone because the iPhone disconnected". The strange this is that the phone did not disconnect because it sync my contacts and is chargin

When I sync my iPhone5 with my Macbook Pro I get the following message "iTunes could not sync calendars to the iPhone because the iPhone disconnected". The strange this is that the phone did not disconnect because it sync my contacts and is charging.
Why does this happen? I have tried several cables and it does the same thing.

Try:
https://discussions.apple.com/message/15519179#15519179

My Macbook pro will not recognize external devices

My MacBook Pro will not recongize external devices such as hard drives

I know that is of no help, but I have the same problem with a Toshiba harddrive. My wifes Macbook Air recognizes it. No problem with the hd I guess. But my macbook pro won't show it in the Finder, About this mac or disk utility - even though it is running. I would also be glad to get a solution to this.

After purchasing the Auto-Renewable subscription, the latest issue did not become available

Hi, I have a problem with my app: After purchasing the Auto-Renewable subscription, the latest issue did not become available for download/reading.
These are the steps I done:
1. I selected one of the options for subscribe
2. Gone through In App Purchase
3. After going through the In App Purchase, app updates the library
4. After updating the library, the latest issue, is not available for download. It still has "Buy" button
The ios certificates seems ok (redone many times), same steps of other 3 apps I already done.
The In-app purchase Product ID are the same in the iTunes Connect and in the app through Viewer Builder (latest version with v19 tools)
In Adobe dashboard the shared secret are set properly, paywall disabled
Somebody had the same problem and can help me? I don't know really what else I can do
Thanks in advance

Today in iTunes Connect create a new in-app and auto-renewable subscription with a new id, rebuild the app with v20 tools and the new in-app purchase ids, delete the free issue and the in-purchase issue in the adobe dashboard and upload from my original indesign files again (the free with date for pubblication yesterday the other with today date), tested all in the sandbox and... everything works fine, after the subscription purchase the button became "download". I was happy and I sent the new app to Apple again (fourth time) for the approval. After only few hours later Apple start the review (this was amazing because it usually takes at least 5 days). One hour later I receive the "reject" state again
After purchasing the Auto-Renewable subscription, the latest issue did not become available for download/reading. Please see below for the steps to reproduce the issue:
1. Launch app
2. Tap Subscribe
3. Select any of the options for subscribe, for example, 3-month subscription as shown in the screenshot 0496
4. Go through In App Purchase
5. After going through the In App Purchase, app updates the library
6. After updating the library, the latest issue, in this case 327 - Maggio 2012, is not available for download. It still has "Buy" button as shown in the screenshot 0497
Now the question is: why on my 2 ipads worked well but apple find again the same error?
Where's the problem? I really need help from some Adobe experts, the "Gold support" don't really support me at all... I wrote a long email with all the details and the answer was one line and after my answer they disappeared ...
In this case unpublish folio and change publication date manually from folio producer and then republish it.
Please follow below link:
http://helpx.adobe.com/digital-publishing-suite/kb/subscription-fail-ios-renditions.html

RAM issues when plugging in external devices

When I plug external devices in such as a USB drive, iPhone or a Firewire external HDD the RAM usage on my Mac shoots up beyond normal levels. This has only started happening recently.
Say for example I plug in my iPhone to sync it. With only iTunes running (no other programs in the dock at all), I get the force quit box come up asking me to close programs down because it doesn't have enough RAM.
I don't get the force quit box come up when I plug USB devices in but the Mac still becomes nearly unusable.
Any ideas how to reset or fix this RAM problem (or whatever else it might be)? Everything else is fine, I can numerous programs that require lots of RAM with no problem at all.

Try resetting the PRAM and resetting the Systems Management Controller.
PRAM
1. (Re)start and immediately press & hold the CommandOption+PR keys
2. Listen for two startup chimes.
3. Release all keys and let the Mac start normally.
SMC
1. Shut down the Mac and disconnect all attached cables; power, USB, FireWire, Ethernet, etc.
2. WAit 15 seconds.
3. Reattach the power cable and a USB keyboard & mouse.
4. Restart the Mac.
5. Reattach all hot attachable peripherals.
Dah•veed

Satellite L505-s5993/windows 7 factory system recovery and recovery disc did not work

Hello, I tried the free factory restore but it would not work. I ordered the restore disk from Toshiba. The instructions on the disc say to insert disk, then press "c" while turning on. This does not work. I have pressed f12 and booted from dvd/cd. this did not work. it starts downloading window files, windows emblem does it's little dance goes away and i'm left with a blank screen and my cursor. Should i just throw the thing away or is there something else i can try. Any help would be greatly appreciated. FYI-I have a Satellite L505-s5993/windows 7
Solved!
Go to Solution.

I have managed to get my computer up and running but am having trouble with the drivers. I replaced the hard drive with a western digital 750gb and went to the intel site to have its trouble shooter check my drivers. See Below:
raphics Driver
Product Detected
Mobile Intel® 4 Series Express Chipset Family
Current Driver Installed
8.15.10.2869
Your driver is current.
  Intel Chipset Software Installation Utility (Chipset INF)
Product Detected
Intel® 6, 5, 4, 3, 900 Series Chipsets
Current Version Installed
9.4.0.1026
This version is valid.
  Audio Driver for Intel Desktop Board
Product Detected
Realtek High Definition Audio
Current Driver Installed
6.0.1.7071
This device is unknown or unsupported. Please contact the manufacturer for possible updates. More information>>
  Wireless Networking (WiFi)
Product Detected
Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC
Current Driver Installed
2007.1.1002.2009
This device is unknown or unsupported. Please contact the manufacturer for possible updates. More information>>
I can run my computer by ignoring the digital signatures(f8 when starting then scrolling down) I can't seem to find what i need on the toshiba site. Thanks for any help!! Noel

Recovery manager did not recover specific type of files

I tried to boot the PC in "Safe Mode" by pressing F8 key at the time of boot. However PC did not boot in "Safe Mode" . So I booted it normally and then open "MSCONFIG" menu. In this menu I opted for Safe Boot under advance option. and then opted for rebooting the PC. However PC did not booted at all. All along it kep showing various DOS commands and then welcome Screen but thereafter PC used to crash and back and forth these activities continued. In order to get of this vicious cycle I tried cold booting by switching off the PC from socket. Then when I tried to boot PC it showed two option one was for normal booting and other was for revoking the startup recovery manager menu. Since normal booting was not possible as "MSCONFIG" menu was configured for booting in "Safe Mode'' and PC just refused to boot in "Safe Mode". Hence only option that was left is to revoke Startup Recovey solution. In Startup recovery menu offered two solution one was "system restore" which I tried but system could not restore to point I suggested. I tried system resore point of older date but system could not restore that point it did displayed some error message. Hence only option that was left was to System Recovery. The system recovery prompted me to take backup which I took. I saw it was copying many many files. The size of backup on my Pen drive was about 8 GB. Thereafter the system was recovered. Normal booting of Windows was also restored. Now I tried to restore my data. The data was restored. Even outlook mails of the size of 4 GB were restored. But on further observing the data which was in my erstwhile My Document folder I was shocked to know that certain files with extension .123, .apr, .adx, .lwp were not restored. These files were created by my use of Lotus Smartsuite software. I used to extensively use Lotus 1-2-3, Lotus Approach and Lotus WordPro for my work. I also observed that .dbf files were also not restored. Well this is a native file format like .txt and .jpeg. Actually when one use Lotus Approach it creates three files one is .adx file that is index file. the other is .apr file which is a database viewer file and the other is .dbf files in which all data is stored. All such files were not resored by HP recovery Manager. This is the problem I am facing. I still have .exe file of the size of 8 GB on my Pen Drive. Is there any way to restore files with extension I mentioned above ???

You are correct. That link no longer works and I could not locate it again. Here is a thread from the forums:http://h30434.www3.hp.com/t5/Notebook-Recovery/HP-File-Recovery-Manager-has-stopped-working/td-p/1502475?send_feedback=true&thread_id=678725&clicked_thread_id=1502475I noticed in your first post "The size of backup on my Pen drive was about 8 GB. " I have found in other comments on the forums that possibly not all files one thought were being backed were in fact backed up. Check in the folder on the flash drive to see if the ones missing are in fact there. The person in that above thread actually had all the files.

I did not sync my device to itunes before it got ruined. How do I retrieve unsynced songs I purchased to add to my new iPhone4

I had over 80 songs I purchased through iTunes using my iTouch. My iTouch got ruined and now I have an iPhone4. I did not sync 50 of those songs to my iTouch. When I visit iTunes, only 32 songs are showing up. When I try to repurchase the lost songs, they say I have already purchased the songs. How can I get iTunes to retrieve these songs for me so I can redownload them again. And can I do this without purchasing the songs over again?
HELP!!!
Danita Hamel

Thank you for your advice. I did contact Apple and they referred me to this website only. I'm so mad at myself. And totally discouraged. Yes, I will be syncing regularly from now on.

FCP 3.04 Not Finding External Device? Help

I am trying to connect my Canon GL1 to a Powerbook G3 400 with 2 firewire ports running FCP 3.04.
FCP keeps telling me that there is no device found?
I tried changing to different settings but nothing works.
The weirdest thing is that iMovie see and controls and captures just fine.
I am working on big project. Normaly iMovie would be fine, but we have 20 some DV tapes to capture and I want the ability to catogorize and label these files.
Please help.
SOS
Cheers
Thinguy

You may be suffering from the dread 'Canon firewire confusion'.
Not all Canon cameras have connection issues, but hanging around this site I've come to recognize their ability to connect in FCP is the most problematic of all the camera brands. If you have a Canon camcorder, and can not get it to connect up with FCP, the following is a way to sort through the issues and get it to work. Some are elegant - some are ugly.
Before we go any farther
-you should be using 'Firewire Basic' as the control protocol. If you aren't, go change it and try again.
-Also, verify that you have a solid installation of Quicktime. You may want to reinstall it using the 'delete receipts' method. Do a quick search here on the site - it is mentioned daily if not hourly.
With some confidence that the software installation and camera settings are correct ... the most direct solution is to purchase another, non-Canon device to use as your capturing machine. The Sony DSR-11 is highly recommended for DV work. A deck will save wear and tear on the camera's lightweight drive mechanism and will allow you to permanently connect a NTSC/PAL monitor for proper viewing. If you are working with HDV, you may have other issues ...
Beyond that, the path you take depends on the model of computer you own.
1. If you have a G5 tower or a MacPro, capture to a second internal drive with only the camera attached. If you need to move material to firewire drive, disconnect the camera. A second internal drive is quite inexpensive these days if you do not already have one.
2. If you have a G5 tower (PCI) MacPro (PCI), G4 powerbook (PCMCIA) or MacBookPro (Expresscard 43) with an available slot, purchase the appropriate firewire card for the slot. Connect your camera to the card and you should be good to go. The new card creates a unique bus and will avoid collisions with the external drives.
3. If you do not have a slot or a second internal drive and you are stuck with the camera, welcome to the camera/drive shuffle.
- shut down and remove the external hard drive(s) from the system
- connect the camera directly to the firewire port of the computer
- start the camera then the computer
- capture to your internal (system) hard drive
- shut down the camera and computer
- disconnect the camera and reconnect the external hard drive(s)
- start hard drive(s) and computer
- move captured files to external hard drive(s)
- edit
If you output back to tape or wish to view your work on an external Video (NTSC or PAL) monitor, you need to set up the camera to use the firewire out as the A/DV converter or VTR - which means reversing the steps:
- copy the file back to the internal drive
- shut everything down
- disconnect the external drive(s)
- connect the camera to the firewire port (and the TV to the camera if needed)
- start the camera then the computer
- play the file.
One caveat here - You may have difficulty getting the file back to tape without dropping frames. Playing files off of the system drive is very demanding and they may have a hard time keeping up.
All in all, if you do not have the option for second bus (i.e. iMacs, eMacs, iBooks, MacBooks) you may want to think about a computer with expandable options next time.
There is the option of capturing using iMovie, but that brings on it's own set of problems and is not recommended.
Good luck.
x

Satellite L750 will not register external devices

About a few days ago my wireless mouse, a Logitech M325, stopped working. I replaced the batteries and performed tests with official software and determined that the USB port was not being read. Soon after I noticed that my iPod would not sync or charge and would not open in Windows Explorer (I use Windows 7).
Additionally none of my SD Cards will be read on my computer.
Please help, this is very frustrating and I'd like it to be fixed ASAP!

You could try to reinstall the USB hubs and controllers which are available in device manager.
Disconnect all external USB devices firstly. Then go to control panel -> device manager.
Here scroll down and find the USB hubs and controllers.
Delete each USB device and reboot the system.
After new reboot, it will take some time until windows system has recognized and installed the USB ports again.
Then you should connect an USB mouse and should test the port functionality.
Even if your wireless mouse would not work again, I strongly recommend to test the USB ports in connection with different USB devices like USB flash memory stick or different USB mouse
Just because one USB device does not work, this does not mean that your USB ports are faulty.

Satellite P100: USB/Fire-Wire ports not charging external device

When I plug my ipod into either my 4 pin fire-wire port or a USB port on my laptop (satellite P100) it fails to charge, even when plugged in to the mains/ A/C power. I think I have found where I need to go in 'control panel' but need help on how to allow my fire-wire and USB ports to give out power and charge my ipod when its connected.
Any help on this matter will be greatly appreciated.
Cheers

Hi
The USB ports provide automatically the power. Usually every USB port provides about 500mA.
But please note; the notebook must run and the external USB device (iPod) must be recognized by Windows OS!
I dont know if the iPod was recognized by WinOS but I have read the many users have problems with the iPod installation on Windows OS. As far as I know the iTunes must be installed if you want to use the iPod.
Greetings

Finder does not display external devices

Today when I woke up, and turned on my macbook, and connected my time machine and 'general use' disk, they didn't appear on the desktop. Not in the finder under devices either. According to terminal they're both mounted. Other programs can access files on the disks. Time machine cannot seem to backup however, and spotlight indexing also seems to fail on the other disk.
I can still access files on them through spotlight (although I didn't remember the name of any file on the time machine disk, so no good there), and thus eject one of them by dragging the window icon into the trash can.
The time machine disk is USB, and the other one Firewire. I have never had this problem before, and Leopard has worked just fine two days before this.

Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences trash these files:
com.apple.finder.plist
com.apple.sidebarlists.plist
Then, restart, or log out and in again.
(You will have to reset a few finder prefs the way you like them.)

Send MIDI notes to external device

I used to send midi notes to an external harmonizer in Logic 9 by defining it as an instrument in the environment and cabling its input to the midi keyboard out.
Just tried this on Logic X and the harmonizer isn't receiving MIDI.
Anyone else?

Hmm.. sorry - rebooted harmonizer - ok now.

£18 charge for a call that did not disconnect??

Not impressed about this at all. several times over the last 2 months my wife has made calls to o2 to get my daughter's iPhone unlocked. Most of these calls laster 3-10 mins at most. Apart from anything else the call centre operators are under pressure to disconnect ASAP whether they have helped or not. Bit like BT really!!!
We recently had a phone bill and I noticed our 'other calls' was very hight. We phoned BT and the operator said it was for calls to 0844s and such like. Luckily we are registered for billing online and having sifted through we found one call to o2 listed as 5 hrs 59 minutes!!!!! There is NO way my wife called them that long and couldnt have even if we wanted too, especially not at 9pm. Clrearly she has hung up after the call as have o2 but it seems the line has not cleared.
To me this is an absolute disgrace. Even if the line had not cleared our end (and we ALWAYS presse the red call finish button) it should have cleared from the o2 end but no. Result, nearly a 6 hous call logged and an £18 bill for it.
I have not yet called BT as I am too busy to passed from pillar to post to no end of departments all who will doubtless need to put you through to some else, even after having negotiated 25 different IVR queues. I am not at all happy about this though and intend to complain, for hwat good it will do. I think the the Ombudsman will be better to complain to than BT.
What have we got to resort to now. Pulling the damned phone line out of the wall to ensure calls disconnect??? Maybe just time to bin BT altogether!!! Time to start looking VERY closely at Virgin and such like I think, especially as we are out of all contracts now and current BT offers are rubbish.

Hi Empgamer,
This doesn't sound too good, I can check this out on my end if you want. If you can email your BT account number and a link to this thread to [email protected] and I'll get back to you.
All the best,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Recovery issue: did not disconnect external devices

Similar Messages

Maybe you are looking for