Recovery loop only on one PC

Whenever I connect either of my two iPods or new iPhone to iTunes, I get in a recovery loop. This only happens on my laptop, not my desktop. Any ideas?

It's possible the USB port on the laptop is not supplying enough power to run the device while it is connected.
If you happen to have a self-powered USB hub (the type that comes with its own power supply), try connecting the iPods and iPhone through the hub, instead of directly to a USB port.
NOTE:  If you happen to be using a USB hub right now, then remove the hub and try connecting one of the devices directly to the laptop's USB port.  It's possible the HUB is not supplying sufficient power.

Similar Messages

  • [svn:bz-trunk] 20754: My latest EndpointPushNotifier change changed the style of the code quite a bit  (sorry for that, it was my IDE settings getting in the loop here) I only changed one char line 389.

    Revision: 20754
    Revision: 20754
    Author:   [email protected]
    Date:     2011-03-10 03:36:05 -0800 (Thu, 10 Mar 2011)
    Log Message:
    My latest EndpointPushNotifier change changed the style of the code quite a bit (sorry for that, it was my IDE settings getting in the loop here) I only changed one char line 389.
    Modified Paths:
        blazeds/trunk/modules/core/src/flex/messaging/client/EndpointPushNotifier.java

    I seem to have fixed it by putting <div  class="clearfloat"></div> after the navigation bar?

  • HT201210 I attempted to update my IPAD to IOS6 and it failed, following this restore keeps failing with error stating recovery failed.  I am stuck.  I have reset several times and retried recovery mode only to get the same endless loop of trouble.  Please

    I tried to update my IPAD to IOS6 and it failed following this recover mode will not wortk either.  I have reset multiple times and tried recovery again only to get the same error stating that recovery failed.  The error states unknown recovery error.  My system OS is up to date with OS X 10.7.5.  Itunes is up to date with 10.7 (21).

    Try:
    - Powering off and then back on your router.
    - The Additional Information paragraph of
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • Loop only one time

    Hi guys,
    I have multiple record in an internal table
    for that i have to loop only once
    ie only first record i have to loop rest i dont want to loop.
    How this can be done?
    Regards
    senthil

    Hi Senthil..
    If you want to Read only single record then use the READ TABLE statement.
    For 1st Record :
    READ TABLE <ITAB> INTO <WA> INDEX 1.
    if sy-subrc = 0.
    endif.
    For reading a single record based on  some condition:
    READ TABLE <ITAB> INTO <wA> WITH KEY MATNR = P_MATNR.
    if sy-subrc = 0.
    endif.
    REWARD IF HELPFUL.

  • Ipod in Recovery Loop AND battery won't charge

    I have read previous discussions about Recovery loops, but have not been able to figure out this:
    My IPod says to connect to a computer, my apple laptop (OS X) says it recognizes an Ipod in recovery mode. I hit "recover" and agree to lose all info. It repeats this over and over. I have tried to plug my Ipod into many outlets to recharge but it always ends up with the screen "connect to a computer...".
    I would send it into the battery replacement offices, but the warning is that you should only do that if that is all that is wrong with your Ipod. I do not KNOW if this is the only thing wrong with my Ipod, since I cannot get it to tell me it's problem. This all happened the day after the 1 year warranty ran out.
    Thanks for any help or advice...
    Katy

    Borrow a friend's Magsafe adatper or go to the Apple store and try plugging into one of theirs.
    Sounds like a dangerously unsafe/damaged magsafe adapter.

  • Is there any way to create admin role only for one resource.

    Hi all,
    I am trying to create an admin role with 'update user' capability. But I want to restrict the user(with the admin role) to be able to update a user's attribute only for one resource, The user(with the admin role) should not be able to update the attributes of the other resources which a user have.
    Is there any way to create admin role only for one resource?
    I customized the tabbed user form to show only one resource attribute (deleting the missing fields and adding my tab for the resource) and then assigned this new User Form to the user(with the admin role) in security tab.
    It works fine. But the problem is that if any user(with the admin role) is also admin of some other resource then he/she will not be able to view the other resource attributes.
    Please suggest,
    thanks

    The loop function always repeats the same region so of course the fade is also copied. So option+drag the original region to make a (non clone) copy, fade the first region and loop the second one (which you just copied).

  • I changed a setting and now my nano only plays one song at a time over and over again.  What and Where to I need to change

    I must have changed a setting because the nano will only play one song and then repeat the one song.  How do I change it back so it will play all the songs on the list?

    Sounds like you turned on the repeat single song feature.
    Go to now playing, then swipe right to left to get to the second screen. At this second screen you will see three icons. The one on the left looks like a loop and I am going to guess that there is a little "1" there on the loop. Hit that button until the 1 goes away. You will be able to find all this info in the online documentation for the Nano. That planb linked to above.
    i

  • Field editable in FB02 only by one user. BSEG-ZFBDT

    Hi:
    I have a question about editing a field and I hope you can help me. I need to make a field editable in FB02, but only for one document type and two users. The field is BSEG-ZFBDT, Baseline payment date.
    I have tried in ‘Document Change Rules’, make this field not editable. And I have tried to create a substitution ( Tx OBBH) and a validation (Tx. OB28)  in order to modify screen-input using the next code.
      LOOP AT SCREEN.
        IF screen-name = 'BSEG-ZFBDT'.
            screen-input = 1.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    Validation is active, but it does not work.
    Please, any idea?
    Thanks in advance for your time.
    Best regards.

    Hi MSL,
    Try using the Transaction Variant in SHD0 for your transaction.
    Use below links for your reference.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a070bfbb-d34a-2d10-b092-ecbe0b0d4a4c?QuickLink=index&…
    Transaction Variant - A Step by Step Guide for Creation - Code Gallery - SCN Wiki
    You can authorize for single users as per your requirement.
    Regards,
    AyyamPerumal

  • IPod 5 stuck in recovery loop after updating to iOS 8

    I own a 5th Generation 32GB iPod Touch. The other day, I tried to update it to iOS 8. Shortly after the installation process began, it went into recovery mode. I believe it's in a recovery loop because I tried using tinyumbrella to exit recovery mode, and the screen went black, the Apple logo came up like it was trying to boot up, but instead went right back into recovery mode. Does anyone know any way I can fix this?
    Another note, if I can get it out of the loop, I believe I can get it out of recovery mode. So even if you only know how to get it out of the loop, that info would be very appreciated. Thank you.
    EDIT: I do have a backup on iCloud, but it's from about nine months ago. I'd really like to be able to save all those photos and videos I've taken since then. I can get my apps back easily, but there's a lot of data that won't be as easy to get back.
    Message was edited by: John Meynardie

    Try the following. I expect you will have to let the battery fully drain.                                              
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Waveform Chart only shows one channel or combines both channels?

    Hi,
    I have 2 analog input channels and data was obtained by sampling at 500Hz and saved into a text file.
    Can any one take a look at my VI and tell me why I am either only getting one curve plotted in the Waveform Chart or it's simply a combination of both of my inputs?
    Thanks.
    hellolv
    Attachments:
    FILE_3.vi ‏48 KB

    Hey hellolv!
    The issue you are seeing is actually a pretty common one.  For a chart to update two plots the input to that chart must be a 2D array.  Basically this means that all you need to do is insert a Build Array function right before the chart.  I coded a quick example that does this for two random numbers in a while loop. 
    If you have questions I might suggest that you implement this in LabVIEW.  You could also check the Context Help (Ctrl+H) and the Charts.VI in the Example Finder (Help » Find Examples).
    Hope this helps!
    Andy F.
    Message Edited by Andy F. on 05-01-2006 12:15 PM
    Message Edited by Andy F. on 05-01-2006 12:15 PM
    National Instruments
    Attachments:
    2DPlotWaveformChart.Png ‏5 KB

  • Foreach Loop only looping once

    Hi,
    Please be patient and bear with me, for I am new to SSIS packages.
    I am using SQL Server 2008 R2 to host the SQL Agent job and the SSIS package.
    I am using Visual Studio 2008 Professional Edition for designing the SSIS package. It is version 9.0.30729, Version 3.5 SP1.
    I am on a Windows 8 machine.
    My Foreach Loop Container seems to iterate only once when it should iterate numerous times, and this issue happens BOTH when I execute the SSIS package from within Visual Studio AND when I run a SQL Agent job to execute the SSIS package.
    For the solution within Visual Studio, I have False for the property Run64BitRuntime.
    In the SSIS pckg in Visual Studio, I have in the Variables pane a number of variables and these following variables pertain to my problem:
    Name: objRs      Scope: the name of the SSIS package     DataType: Object    Value: System.Object
    Name: txtVendorFamilyNumber   Scope: the name of the SSIS package  DataType: String   Value: 111111
    The value "111111" that I entered into the txtVendorFamilyNumber variable in the Variable Pane is NOT a realistic value as there are no vendor family numbers that have the value 111111. I will populate dynamically the real vendor family numbers
    from within the SSIS package.
    When I imported the SSIS package to SQL Server 2008 R2, via the ellipsis button for the Protection Level I chose the "Rely on server storage and roles for access control" choice.
    Concerning the flow of the SSIS package, going down within Visual Studio from the beginning of the flow of the SSIS package, eventually I have an Execute SQL Task. In its General tab, it has "1252" for CodePage property, "Full result set"
    for ResultSet property, "OLE DB" for ConnectionType property, "Direct input" for SQL Source Type property, "False" for BypassPrepare property, and the following for the SQLStatement property:
         select txtVendorFamilyNumber from tmpVendorFamily  where VendorID = (select min(VendorID) from tmpVendorFamily)
    In the tmpVendorFamily table on SQL Server 2008 R2, there are 379 rows of results for the SELECT statement above (starting with the values 100110, 100115, 100120, 100130, through the LAST row's value 106370.
    In the Parameter Mapping tab of the Execute SQL Task Editor, I have nothing. In the Expressions tab of the Execute SQL Task Editor, I have nothing.
    In the Result Set tab of the Execute SQL Task Editor, I have the value 0 for Result Name property and I have the value User::objRs as the value in the Variable Name property.
    This Execute SQL Task has a green arrow (Constraint evaluation operation, Success in Value drop down) to the Foreach Loop Container.
    In the Foreach Loop Editor, in the Collection tab, I have "Foreach ADO Enumerator" as the value in the Enumerator property. In the drop down for ADO Object Source Variable, I have chosen the User::objRs, and I have the radio button "Rows in
    the first table" selected.
    In the Foreach Loop Editor, in the Expressions tab, I have nothing.
    In the Foreach Loop Editor, in the Variable Mappings tab, I have "User::txtVendorFamilyNumber" for the Variable property and I have the value "0" for the Index property.
    So in the Foreach Loop, I first have a Script Task with the ReadOnly variable User::txtVendorFamilyNumber and with the ReadWrite variable User::TESTING_OnlyTesting that I created with a package scope, string datatype, and no default value. This Script Task
    has the following code for testing purposes:
    Dim strFullVerbiage As String
    strFullVerbiage = "The value is: "
    Dts.Variables("User::TESTING_OnlyTesting").Value = strFullVerbiage + Dts.Variables("User::txtVendorFamilyNumber").Value.ToString()
    Dts.TaskResult = ScriptResults.Success
    I have next in the Foreach Loop Container a Send Mail task. In the Expressions tab of the Send Mail Task Editor, I have for the Message Source property the following:
          @[User::TESTING_OnlyTesting]
    The remaining tasks (including FTP Tasks) in the Foreach Loop Container are disabled for now as I am trying to figure out why the Foreach Loop only iterates the FIRST time, only iterates once.
    When I run on SQL Server 2008 R2 the SELECT statement from the Execute SQL Task, I get 379 rows of results. The default value 111111 that I entered into the Variable Pane for the txtVendorFamilyNumber variable does NOT exist in any of these 379 rows of results.
    The 1st row of results has for the txtVendorFamilyNumber column the value 100110. Then the subsequent rows of results have the values 100115, 100120, 100130, et cetera, ending with the value 106370 in the last row of results.
    I imported the SSIS package into Integration Services on SQL Server 2008 R2. When I imported to Integration Services, in the Import Package editor for the Protection Level I chose the "Rely on server storage and roles for access control" choice
    because there are FTP Tasks and we needed to use this "Rely on server storage and roles for access control" choice.
    I created a SQL Agent job that executes this SSIS package.
    When I run the SQL Agent job, no error happens and I get only ONE email with the value 100110 for the vendor family number in it. I should get 379 emails total, the 2nd email showing 100115, the 3rd email showing 100120, et cetera.
    When I was testing while executing the SSIS package from within Visual Studio, I did NOT have the Send Mail task and I only had enabled one Script Task that had the ReadOnly variable User::txtVendorFamilyNumber and the following lines of code:
    MsgBox(CType(Dts.Variables("User::txtVendorFamilyNumber").Value, String))
    Dts.TaskResult = ScriptResults.Success
    Executing the SSIS package with only this Script Task enabled within the Foreach Loop Container, I would get the ONE message box showing 100110 but I would not get any message box for a SECOND ITERATION of the loop.
    Since my txtVendorFamilyNumber in the Variables Pane has the default hard-coded value 111111 that does NOT exist in the result set of the Execute SQL Task that feeds the Foreach Loop, and since the first and only email sent shows the value 100110 when I
    run the SQL Agent job that runs the SSIS package that is set up to send an email from within the Foreach Loop Container, the FIRST LOOP seems to run correctly and shows correctly the 1st value 100110 in the 379 rows of results that populate the Foreach Loop
    Container. Why does the Foreach Loop Container NOT loop more than once?
    Could anybody give me any suggestions as to what the problem might be?
    I thank you in advance for your consideration of my problem. I have been reading and reading on the Internet to try to find a solution but I have not solved yet my problem with the Foreach loop only iterating once.
    Thanks much to you.

    Gregarious greetings Arthur,
    I very much appreciate your reply.
    This morning I figured out my problem with the help of a fellow employee.
    In my original post higher up, I had typed about the SELECT statement in the Execute SQL Task that is just before the Foreach Loop Container and that populates the User::objRs, and this SELECT statement was in the old DTS package in an old ActiveX script
    task. The SELECT statement was in an old DTS package in an old ActiveX script task and I am creating a new SSIS package to replace the old DTS package so that we can move from the old version of SQL Server to a new SQL Server 2008 R2 server. Here is that
    SELECT statement:
     select txtVendorFamilyNumber from tmpVendorFamily  where VendorID = (select min(VendorID) from tmpVendorFamily)
    That SELECT statement above returns ONLY ONE result. I had not noticed it. That SELECT statement fills the objRs result set. The green arrow goes from the Execute SQL Task that has the SELECT statement down to the Foreach Loop Container that loops over the
    result set. Since the SELECT statement that fills the result set only has one row of results, the Foreach Loop only looped once.
    So for the Execute SQL Task that populates the result set User::objRs, I changed the SELECT statement to be the following:
    --In the Utilities DB, this tmpVendorFamily table
    --has only two columns named VendorID and txtVendorFamilyNumber.  
    SELECT DISTINCT txtVendorFamilyNumber
    FROM Utilities.dbo.tmpVendorFamily
    ORDER BY txtVendorFamilyNumber
    Now the Foreach Loop will loop 379 times since the SELECT statement immediately above yields 379 rows of results.
    So the Foreach Loop Container was fine. Its Collection tab has the "Foreach ADO Enumerator" for the Enumerator and has the "User::objRs" for the ADO Object Source Variable. Its Variable Mappings tab has "User::txtVendorFamilyNumber"
    for the Variable and has "0" for the Index.
    My problem was the SELECT statement in the Execute SQL Task that immediately precedes the Foreach Loop Container and that fills the User::objRs result set. The SELECT statement yielded only ONE row of results. When I corrected this morning that SELECT statement
    so that it correctly yields 379 rows of results, the Foreach Loop Container loops 379 rows.
    Thanks again for replying and trying to help. I very much appreciate it.
    I consider this thread that I created to be closed since I figured out this morning how I needed to correct the SELECT statement in the Execute SQL Task that fills the result set on which the Foreach Loop loops.
    Misko_Hviezdoslav   27-JAN-2015

  • How to sync with Firefox sync after reinstalling Windows? I only have one device.

    Just like this user I was syncing only one device. After reinstalling windows, I can't reconnect and I don't have the recovery key...
    What can I do? To access my bookmarks, favorites, etc?
    Thanks!

    Thanks for the replies. Unfortunately I'm missing the recovery key and don't synch with other devices so I guess that means I'm out of luck...
    Maybe this is something that can be added to the roadmap for future improvements. I don't see a reason why you can't get your information back after a reset if you've only got one device.

  • TS1702 why does apple not have a program to get iphone out of recovery loop i have tried over 30 times to get this pile of rubbish going the money you pay for these they should be more help from apple

    Quite impresed with apple at first but they are lackingin backup for iphone when its stuck its stuck in recovery loop wont start or upgrade amasing when you look on apple forums many people in the same situation but no one knows the answers.Many people on your tube profess to but they dont they always show iphone with apps on them its not stuck in recovery you wont get app just connect to that stupid itunes that can not do that much as i said first look was impresive but not sure now

    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    Error 20, 21, 23, 26, 28, 29, 34, 37
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.

  • HT4623 my ipad 3 has become stuck in a recovery loop after an update what do i do??

    i recently updated my ipad only to have it stuck in a recovery loop befor the update had even finished. i have tried everything and i cannot seem to fix it without restoring the ipad is there any way around puting it back to factory settings

    Yes, unfortunately you will lose everything unless you have a backup that you can restore from after you restore the iPad.
    You will be able to download virtually all of your purchased content again at no charge as long as you use the same Apple ID that you bought it with and as long as the content is still available if the iStore where you bought it.
    I know that nobody wants to hear this when they get into this situation, but that's why it's so important to backup and backup with regularity.

  • How can I get ALL of my Google Calendars to show on the iCal on my iPhone? I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

    How can I get ALL of my Google Calendars to show on the iCal on my iPhone?
    I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

    https://www.google.com/calendar/iphoneselect

Maybe you are looking for