Recovery Maanger Error Hp-Mini-210

Hello.
I Have A Problem While useing My HP Mini-210-1080NR NetBook
When I Boot Up And Go To The F11 Key,It Says Windoes Is Loading Files Whitch Is Fine.
And Now I Click ON System Rercoverly,And It Says The The Imfomation,Then,Onsine, It Stars Saying This:
Tittle Bar:
Mirosoft Visual CC++ Runtime Error
Massage:
Runtime Error!
Program: X:/ Windoes\RM\recoverymgr.exe
Screenshot:

Actually I found the same error message on another forum threat.
Here is my Error taken from CROError.flg file opened when I click on Details.
TDC Preinstall diagnostic Tolls for Windows 7-TDC
Error Different LOC# detected
Error SKU number LOC#=00
Error OptionDashCode.ini value for ABC=12
Error: SKU number incorrect for this LOC#=ABC
Next Step Please dash SKU number with xxxxxx-12x
Next Step or use EEPROM and change LOC# in either SKU Number or CTO Localization Code
Could it be wrong Recovery Disks that HOP sent me also?
-GG

Similar Messages

Hp pavillion a000 recovery disk error.. where to go from here?

HI.. .fIRST Thank you so much for being here today...
I have an HP pavillion a000 which was bought used.
About a week ago I got pre-windows msgs. on the 3rd time it has frozen at this point
Msg as follows...
bla bla.. but windows did not start successfully..
a recent hardwared or software change may have caused this..
It has counted down and started in normal mode..
then it has frozen.. and I have tried to start it it all modes..
This last attempt actually started windows and went back to this screen
I put in the compaq recovery disk... I get red screen saying recovery disk error..
PLEASE Contact support
I have un plugged..re plugged and we go in circles...
I'm not sure where to go from here but any suggestions would be VERY appreciated as I do have some artwork I was doing stuck in computer now..
Do you think it's a software,, hardware or even a virus thing??
Additional info... Hp pavillion a000 system no.174A-ABA. hw bom 8121110 sw bom NA 40
serial no. mxk34916m
operating system.. Windows xp... yes I tried recovery disks I have.. puter says...non compatible..
I use firefox as browser via century link dsl..
I can pull the hard drive and I have a harness for accessing the hard drive directly via usb download if you think that's an option but not letting me into windows even has me doubtful that would work;;;
So as I mentioned.. ANY sugestions you can offer as what to try next would be MOST welcome!
I can replace the computer easy enough but I would love to be ables to rescue my art in progress at least!

Hello ValeryWildflowr,
If the computer was working fine before you might just want to try a system restore. This should correct the problem without affecting any of your files.
Here is a link for a system restore.
Let me know if this helps.

HTTP 500 INTERNAL SERVER ERROR ixml mini renderer_rec: invalid arg

Hi...
this days we installed sap netweaver 7.0, and now I begin to try, execute service examples ( the folder samples of bc/sap/gui/its, I try with example_flow_M, iac_flight ... but i have always the same problem: http error 500, internal server error, and i can't inicializate anything,
the services are published, and if I debug the service, the pbo of asociate transactions runs, without problems, and after the error appear,
I try to trace the service and I found:
ERROR => ixml mini renderer_rec: invalid arg [xmxxr_id1323 ]
ERROR => ixml mini renderer_rec: invalid arg [xmxxr_id1323 ]
ERROR => ixml mini renderer_rec: invalid arg [xmxxr_id1316 ]
ERROR => julep: PpioCreateParseTree: IRepRetrieve(templates\system\header.html) failed. [w3xxppio.cpp 1184]
ERROR => julep: PpioCreateHtmlPP: PpioCreateParseTree(templates\system\header.html) failed, rc=0x10c [w3xxppio.cpp 985]
ERROR => julep: XIntInterpret: PpioCreateHtmlPP(templates\system\header.html) failed, rc=0x10c [w3xxjuce.cpp 528]
ERROR => xgdk: MsgtBuildHtmlBlock: IntpDoInterpret (templates\system\header.html) failed, rc=0x2101 [w3xxmsgt.c 220]
ERROR => plugin: XKrnHandleResponse failed rc= -52 [itspxkrn.cpp 764]
ERROR => plugin: ItspXKrn_HandleResponse failed. 000007FF51325C70 rc: 0 [itspxkrn.cpp 391]
ERROR => ipl_ConvertOut failed rc = 1, send icf error page [itsplxx.c 1526]
ERROR => ipl_ConvertOut returns 1(ITSPE_FAILURE) [itsplxx.c 1529]
ERROR => Raise Last error:[1 from: itspxx.cpp :817] [itsplxx.c 1216]
ERROR => RaiseError(sapdext) ITS_P:01 [itspxx.cpp 817]
HTTP> [1] ab_HttpCleanUpExt: Error interno
REST: HTTP 500 - Internal Server Error Su equipo Internet Communication Framework SAP </td>
00000000278B7E50 000096 72766572 20457272 6f720d0a 436f6e74 rver Error..Cont
any suggestion?
PD: sorry for my poor English level,

Thanks !!
But any question, when you say refresh you refer to disactivate service and activate service once, or refresh is a specific functionality, in this case, where I can find refresh service??
:S

Recovery access error 0xc000000f

My recovery was working fine while ago. But after installing win7 32bit using recovery partition using F11, updating to Win 7 SP1 and deleting some personal files inside D partiiton, now 1. getting error code 0xc000000f on booting to F11 recovery.2. My win7 OS is working fine. Also now created USB recovery drive using HP flash recovery win7 , booting into it gives same error code 0xc000000f 3. Then using win 7 DVD, tried repairingBootrec.exe
bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd
bootrec /fixmbr
bootrec /fixboot 4. But now, on booting to F11, instead of recovery or error code 0xc000000f it just boot to win7 OS. But created USB recovery drive using HP flash recovery win7 , booting into it gives still same error code 0xc000000f

Hello , Welcome back to the HP Support Forums! I understand that you are having an issue with the recovery, and wanted to assist you! Please review the following resources, as they may be able to help:Restoring Recovery Manager & F11 System Recovery lost due to Clean (Custom) Win 7 InstallationHP PCs - Troubleshooting HP System Recovery Problems (Windows 7)Windows 7: Boot Manager Status 0xc000000f, boot selection failed Please let me know if this information was helpful by clicking the thumbs up below.
Have a great weekend!

Mapping Error : structure min!=max without mapping

When trying to test my map, I am recieving the error:
structure min!=max without mapping
It seems to me that thsi would normally be caused by a particular field that has a minimum occurance of 1, and is not being populated. However, I have double checked to make sure all of the fields that must be populated are in fact getting populated.
Are there any other causes for this error?

I am obviously missing something, but having difficulty spotting it. I assume I must be forgetting a field somewhere. I am mapping to a Matmas05 IDoc. The only fields / segments that XI requests be populated are:
E1MARAM (segment, plus several fields)
E1MAKTM (segment)
F7 says the mapping is not sufficiently defined, so obviously I have left something out. When the E1MARAM structure is open all fields inside it are green, however when I close it, it becomes red. But there are not any red fields inside it. How do I find the field that it is requesting be populated?

How do i resolve an activation error in mini ipad

how do i resolve an activation error in mini ipad?

If you were on iOS7 beta, then it looks like the beta version has expired on you. You have to upgrade to the latest release version to get it working again.
Go here: https://developer.apple.com/devcenter/ios/index.action
Once there, download the latest version for your device and install the update the iPad. iTunes will not do this automatically, but if you do the following steps (after downloading) you should be good.
Plug iPad into your computer where you downloaded the latest release (7.0.2 at time of this post)
Open iTunes and click on the button in the upper right of the app for your iPad
Hold option (mac) or shift (windows) and click on Check for Updates. This will bring up a browse dialog.
Find the .ipsw file named something like this: iPad2,5_7.0.2_11A501_Restore.ipsw
Follow prompts to update and activate your iPad.
You should be back to normal at that point.
Apple will expire developer versions to make sure people are not using old versions for testing or development.
Hope this helps!

TS3694 plz help i failed to fix my recovery mode error 1015

hello i failed to fix my recovery mode error 1015

Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.

HT4718 Mountain lion install- no recovery hd error

I am trying to install mountain loin and keeping getting"can't install-no recovery hd" error.. I have installed mountain lion on an external drive as suggested but when I try to install afterwards back on the MacBook it still says it can't install due to no recovery hd. I have been trying for 2 days now, HELP please.

I have mountain lion installed on the ext HD. I don't know if it has a recovery HD or not, I just did the install from the downloaded app. The app was on the MacBook pro drive. Now the MacBook will not boot at all. It just shows the apple logo and a spinning loading symbol but doesn't come on. I don't know how to boot from the external drive.

Phone stuck in recovery mode error code 40 and would not restore

My Iphone 3GS stuck in recovery mode error code 40 and would not restore.I was with AT & T.Please help!

Hi there...
Actually I was stuck with this situation yesterday. Here is what I did to overcome this issue: I hope it helps.
To start with, here are few things to you should make sure of:
1- You have the latest version of iTunes. You may try to uninstall and reinstall iTunes.
2-Restart your Windows.
If still no luck, try editing the Hosts file, here is how;
1- click on RUN then copy and paste the following:
notepad c:\windows\system32\drivers\etc\hosts
2- look for gs.apple.com
3- if there are numbers infront of it just delete them or just type # before the numbers.
4- Save the file and try restoring again.
Note: you should have administror access to edit the Hostes file.
put your iphone in DFU mode before restoring.
I hope this helps. It did for me

How to remove hp envy m6-1204tx win8 recovery incomplete error

how to the remove hp envy m6-1204tx win8 recovery incomplete error

It appears that you did not manage to create a partition correctly.
The first thing to try is the Windows repair disk, if you made one before you began your partitioning adventure. This will be an attemp to repair the BCD. If you don't have access to a Windows repair disk,then it may be time to use your recovery disk set or USB recovery media.
I do hope that you made external copies of whatever you had saved on your notebook before playing around with partitioning utilities.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

TS3694 ipad mini gone to recovery mode error 6

tried to link ipad mini to my itunes account has gone into recovery mode, tried to fix via itunes not happening error 6 ?

I have solved the same problem of my iPhone, this is my method:
Step 1: Disconnect the data cable and turn off your iPhone.
Step 2: Press the "Home" button and connect your iPhone to the computer with data cable, and then release the "Home" button.
Step 3: Now you have enter into recovery mode successfully.
Step 4: It is very easy for you to exit recovery mode. Please press both the "Home". button and "Power" button at the same time until the LOGO "white apple" appeared on the screen.
After that, if you found your iPad stuck in recovery mode, you can use FonePaw iPhone Data Recovery to get them back.

Error from Recovery Manager on HP Mini-110 1135CA

Hi,
after having a hard disk crash I had to order the Recovery Disks from HP called System Recovery DVD Windows 7 Starter EM and after going through the steps two times, it always fail at the end with error message: "The recovery attempt failed. Select one of the following buttons: Save Log, Details, Retry.
I chose Retry twice to be sure it was not a external DVD problem or something else.
I also saved the Log if anyone want to see the log, I have the SRD file generated which is not readable with Notepad or Wordpad. I could send it to you.
Any one had this or have ideas what makes this error?
-GG

Actually I found the same error message on another forum threat.
Here is my Error taken from CROError.flg file opened when I click on Details.
TDC Preinstall diagnostic Tolls for Windows 7-TDC
Error Different LOC# detected
Error SKU number LOC#=00
Error OptionDashCode.ini value for ABC=12
Error: SKU number incorrect for this LOC#=ABC
Next Step Please dash SKU number with xxxxxx-12x
Next Step or use EEPROM and change LOC# in either SKU Number or CTO Localization Code
Could it be wrong Recovery Disks that HOP sent me also?
-GG

I can;t update my iPod to 4.0.1. It goes into recovery mode (error 1602)

I have a 3rd generation iPod touch. Its on 3.1.3 atm. I want to update it to 4.0. The update goes okay until the part 'Preparing iPod for update)where my ipod tourns off and then goes to the screen where the itunes logo with the usb cable thing. then a window pops up (not in itunes, in vista) saying 'windows needs to install driver software for your apple mobile device (recovery mode). After a while itunes says iPod could not be updated (error 1602). I've tried everything. Please help

Have you been reading about IOS4 on this forum? Do not upgrade unless you want your ipod to be useless. Mine is stuck inrestore mode after the upgrade. Read a few post about IOS4 and the ipod touch. It will change your mind

Windows Boot Error Hp Mini

My Hp Mini will not start. There is no disc drive but the solution given was to insert windows installation disc.
File \ntldr
Status 0xc000000f
Info the selected entry could not be loaded because the application is missing or corrupt.

Hi hphellp.
Thank you for your post, I will try my utmost, to aid in this endeavor.
I understand that you have a HP Mini and it will not boot. You get the error 0xc000000f and prompt to install windows disk. Here is a document I think will help.Error: The boot selection failed because a required device is inaccessible (Windows 7, 8). If you have a recovery disk, you could possibly borrow and external CD/DVD drive and connect with USB, to overcome this issue.
If this does not resolve your issue would you please provide your operating system and the exact model of HP Mini you have. How Do I Find My Model Number or Product Number?
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Hal.dll error - HP Mini 1030 NR fails to boot following XP reinstall.

Following a reformat of the solid state HDD and subsequent reinstallation of XP from the recovery disc, I receive the following message: "Windows could not start because the following file is missing or corrupt: <Windows root>\system32\hal.dll" - I've tried multiple fixes using the "expand" (copy) command from the XP recovery disc to replace the .dll file as well as rebuilding the boot.ini file. Any suggestions would be appreciated...

Hi Paul - thanks for your suggestions...
The associated HP Mini 1030 utilizes a 16 GB SSD as its only drive other that a removable SD card. It has worked well within my home network for web based applications (streaming, MP3's, news etc.) in my kitchen for the last year. It was configured new with a no frills bare bones XP platform. I removed all extraneous programs except for a basic antivirus routine. Eventually however, the SDD became filled to capacity with security updates and other file allocation clutter typical of the XP platform and I started getting memory warnings.
As I've done with other XP machines, I reformatted the SDD and have attempted to reinstall the operating system using the associated recovery disc as supplied from HP. I consistently get the "Hal error" early in the bootup process and as a result, Windows will not launch.
I read through the MS links you included and have the following comments:
Suggestion #1 - Unless I'm missing something, I can't change the "computer type" in the control panel as the laptop will not boot to windows.
Suggestion #2 - Forcing a system Hal... would like to try this but am not sure what configuration I'm looking for with this type of laptop (Standard PC?).
Any other thoughts? thanks again for your help...

Recovery Maanger Error Hp-Mini-21​0

Similar Messages

Maybe you are looking for

Recovery Maanger Error Hp-Mini-210