Recovery Manager & downloading recovery manager problems 2014 version

Hi,
Firstly, I would like to say that I am sincerely greatful to Mumbodog for helping me with this problem.
Problem:
Recently bought an HP 250 G2 which had Windows 8 Home. I required Windows 8 Pro and used my upgrade disk to install. This inadvertantly wiped all other software including the HP Recovery Manager. It also made the laptop pretty much useless because all the hardware peripheral software was removed as well. If you have done this then you cannot use the recovery or pc reset tools available in Windows 8. This was extremely frustrating because there was a recovery partition available with all the software on it to restore my laptop to its original condition.
I tried everything suggested but many of the technicians simply did not understand what the problem was. Some even suggested using the recovery manager when individuals had specifically stated that the Recovery manager was unavailable to them or suggested links which then described a process that used the Recover manager.
I finally stumbled on this post and it worked. The HP recovery manager hides in F11 on boot. Please read Mumbodog post that follows:
Mumbodog
Associate Dean
Re: Download Recovery Manager
Options
‎09-21-2011 10:37 AM
The full recovery manager program is not available for download, the only way I know to get it back is to use HP Recovery from the hard drive (F11 at boot time) or Recovery media to re-install Windows and all the HP software. You will lose all personal data when you do this so back up before restoring.

Hi,
If you have created your USB Recovery, use this to perform the reinstallation.
If you don't have this, you can order a replacement Recovery USB Kit using the link below and use this to reinstall Windows.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP - make sure to specify that you require the USB Recovery Kit.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Unable to add data connection. Could not load file or assembly 'Microsoft.SqlServer.Management.Sdk.Sfc, Version 11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.

I installed MS SQL Server 2014 Express and I'm using VS 2013 Professional. I create a database in SQL Mgt Studio then I open up VS and using VB I create a form and add a data grid. When I test connection it is fine but when I click ok it gives
me the above message. Sql Server is listening to port 1433 with IPALL disabled. I installed management tools and another program. So I uninstalled and then installed SQLExpressADV 2014 reset everything as mentioned and I get the same results.
I cannot develop any applications and am getting frustrated enough to maybe start looking around for a better DB solution that works. I've noticed a lot of people getting this same error and I think Microsoft should implement a fix for this. Does
anyone have some ideas on how to fix this? Since it will not list the files it cannot find I do not know what is broken.

Hello,
Please perform the steps described in the following article.
http://sqlbeyond.blogspot.com/2012/08/vs-2012-error-could-not-load-file-or.html
But download the SQL Server 2014 version of the software mentioned in the article.
http://www.microsoft.com/en-us/download/details.aspx?id=42295
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Could not load file or assembly Microsoft.SqlServer.management.sdk.sfc version 11.0.0.0 on Visual Studio Ultimate 2014 Update 4

I am getting the infamous "Could not load file or assembly Microsoft.SqlServer.management.sdk.sfc version 11.0.0.0." The set up of my system is Visual Studio 2013 Ultimate update 4 and my SQL server is 12.0.2000 Express. I am also using SQL
management studio 2014. I read other comments and blogs, and reinstalled the SQL Express 12.0.2000, but no luck yet.

Hi payam49er,
>>I am
getting the infamous "Could not load file or assembly Microsoft.SqlServer.management.sdk.
sfc version 11.0.0.0."
Based on your error, could you please tell me what you do operation and then you get the error message?
Could you please tell me if you add a data connection from Server Explorer Window in Visual studio 2013 Ultimate update
4 and then you get the error message?
If yes, to check if the issue is related to the VS IDE issue, I suggest you can execute the following commands to check if it can
help you add data connection in VS2013 Ultimate Update 4.
(1)I suggest you can run your VS in safe mode by executing Devenv.exe /SafeMode to add a data connect again.
(2)I suggest you can use the Devenv.exe /ResetSettings to restores the IDE's default settings, optionally resets to the specified
VSSettings file.
(3)You can execute the Devenv.exe /ResetAddin to remove commands and command UI associated with the specified Add-in.
In addition, if you used the SQL Server Express to connect the data in VS, you need to specify the server name
as MyComputerName\SQLEXPRESS. If you used the SQL Server to connect the data in VS. Please you try to specify the server name as MyComputerName\InstanceName here to check the result.
If still no help, according the error, it indicates that the problem is that the system cannot locate the right assembly (SQL
Server SDK). So I think you may get better response and solutions if you consult on SQL Server forums.
Thank you for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Adobe Application Manager Doesn't list any 2014 versions of programs. How do I update to those versions?

My Adobe application manager doesn't list the 2014 versions of the core programs. I need them to grade the work of my students, as my school runs these versions and I can't open the work on my computer.

Thank you, for your help
I got it while waiting for the answer. The "Application Manager" is not how these get installed (how would I know that). I installed the "Adobe Creative Cloud" application and got the new versions.
It's was confusing because the Application manager installed on Nov 4. Very recently right! (but just prior to updating my operating system to Yosemite, OK Duh). And of course Yosemite has changed the look and functionality of everything, including this, so anything I was doing that should be intuitive was less so.

Problem sequencing SQL Management Tools 2014

Hi
I'm using APPV5.0 SP2 to sequence SQL Management Tools 2014. Unfortunately when running the APPV package on the client, I get the following error:
Invalid license data. Reinstall is required
This seems a known issue (even with SQL MGMNT tools 2012). After some searching, I found out that it's related to a Visual Studio 2010 bug. A hotfix has been released (KB2526163) but won't install so this doesn't solve the issue.
Has anyone managed to sequence either SQL Management Tools 2012 or 2014?
thanks for your help
Gert

We used the SQL Server 2014 Management Studio sources, not the full SQL Server binaries. Like Rory did in his recipe.
Product Name: SQL Server 2014 Management Studio (x64) - (English)
Filename: en_sql_server_2014_management_studio_x64_exe_3941421.exe
Downloaded from the MSDN Subscriptions
website.

Media Manager Problem

Here is my problem, I have installed BlackBerry Desktop Manager version 4.2, 4.3, and 4.5, (not at the same time, of course) and have been attempting to open up Media Manager on each version. On every single version it has given me the same exact error. When I click on the Media Manager icon in the Desktop Manager, a window pops up entitled "Format Loader: LoadImage" with the message
"Image file "file::C:\Program Files\Common Files\Roxio Shared\9.0\Common Resources\Shared\Generic\Images\About_RIM_Background.png" cannot be loaded".
After I click OK on that, another very similar window pops up saying
"Image file "file::C:\Program Files\Roxio\Media Manager 9\Resources\Default\Generic\Images\AboutMM.png" cannot be loaded".
After clicking OK there, the "MediaManager9 Module has encountered a problem and needs to close." window pops up, asking me to send the error report. I'm running Windows XP Pro with SP 3 if I remember correctly. My phone is the Blackberry Curve 8310 with AT&T
Things I have already done
-Reinstalled
-Repaired Installation
-Redownloaded
-Downloaded different version
-Tore my hair out
Anyway, please help. Thanks, much appreciated.
Message Edited by Moskvich on 08-01-2008 07:21 AM

Hi Moskvich!
Just to let you know first of all there is a know issue with XP and Roxio working together, as per the Tech
that I just talked to last night.
First of all, when you install, uninstall, install, uninstall, etc.... any program, you can run into a problem.
I would not try this at home unless you are really familiar with this step, because it WILL mess up your computer
if you do it wrong. Unless you know someone who has knowledge on it. Good Knowledge!!
: Because the program was installed several times you should, or have someone else, go into the registry and delete
all the files, AND O N LY the files that are associated with the Media Manager. Again, if you delete the wrong files it will
prevent that program from functioning properly.
Then restart the computer and reinstall one, and only one program.
Just an FYI: I also am having some problem with it freezing up and getting errors. But what I have found out is that
it works better if I shut down the Media manager first before I unhook the phone from the computer, or shut down the
Desktop Manager.
Also, be careful on what you are doing and not trying to do different things while using the M. Manger. It seems to
be very sensitive with other programs running.
Remember, this is not a fix. But may help. Every computer is different. There might just be a compatibility issue
with what you are running on your computer.
Hope it helps.
By the way, don't pull your hair out, you'll need it at a later date!!!!!!!!

Adobe Master Collection CS5.5 - Application Manager Problem

Hi Community!
Recently I downloaded the 30-days trial version of Master Collection CS5.5.
Everytime I try to run Photoshop x64, an error occurs which says that I have to update my Application Manager. The 32bit Version of Photoshop works fine.
When I try to install the Application Manager Update, it shows "installation initialysing", but nothing more happens.
What is wrong with it?
Thank you in advance

Are you Mac or Windows? If Mac, please quit all programs, launch Disk Utility and Repair Permissions.

Flash Builder 4 Beta 2 ---- Data Management Problem

Flash Builder 4 Beta 2 ---- Data Management Problem
I have a simple datagrid, a PHP service and a MySQL database. When I run the code I get multiple(7) records returned to the datagrid. Once I enable Data Management and run the exact same code, I only get 1 record returned.
Is there a setting in Data Management that affects the number of records returned?
Here is the MXML code I am testing.
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                     xmlns:s="library://ns.adobe.com/flex/spark"
                     xmlns:mx="library://ns.adobe.com/flex/halo" minWidth="1024" minHeight="768" xmlns:carasgndataphp="services.carasgndataphp.*">
      <fx:Script>
            <![CDATA[
                  import mx.controls.Alert;
                  import mx.events.FlexEvent;
                  var inptdata:String = "1";
                  protected function dataGrid_creationCompleteHandler(event:FlexEvent):void
                        getAsgnDataResult.token = carAsgnDataPHP.getAsgnData(inptdata);
            ]]>
      </fx:Script>
      <fx:Declarations>
            <s:CallResponder id="getAsgnDataResult"/>
            <carasgndataphp:CarAsgnDataPHP id="carAsgnDataPHP" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
            
      </fx:Declarations>
      <mx:DataGrid x="115" y="91" id="dataGrid" creationComplete="dataGrid_creationCompleteHandler(event)" dataProvider="{getAsgnDataResult.lastResult}" width="558" height="298">
            <mx:columns>
                  <mx:DataGridColumn headerText="A" dataField="numAsgn"/>
                  <mx:DataGridColumn headerText="T" dataField="numTopic"/>
                  <mx:DataGridColumn headerText="U" dataField="numUnit"/>
                  <mx:DataGridColumn headerText="P" dataField="numProblem"/>
                  <mx:DataGridColumn headerText="TP" dataField="PType"/>
                  <mx:DataGridColumn headerText="P" dataField="numSeqPresent"/>
                  <mx:DataGridColumn headerText="F" dataField="numSeqFeedback"/>
                  <mx:DataGridColumn headerText="D" dataField="numDelay"/>
                  <mx:DataGridColumn headerText="ID" dataField="idAsgnData"/>
                  <mx:DataGridColumn headerText="IDP" dataField="idProblem"/>
            </mx:columns>
      </mx:DataGrid>
</s:Application>

Hello,
Data Mangement expects unique values for id property.This issue may occur when you select 'Identity' property in Data Mangement wizard which is not unique in the Table.For eg:, you have selected 'name' field as identity property. And your MySQL database table has multiple rows with identical values for 'name' column.
Can you verify if you have similar setup?
Thanks,
Radhakrishna

Hi, I am having a problem downloading After Effects CC (2014)

Whenever the download hits 54%, it totally stops. It's not my connection, I have checked it and it's all normal and I have tried it at 2 different places.
I would like to know what I can do to get the program.
By the way, it's the 30 days free version of it.

if you follow all 7 steps you can directly download a trial here: Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439

An Small step by step how to install this app. I this first example it was installed on Red Hat 6 Linux
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439.
1 - Download it from https://lenovo-na-en.custhelp.com/app/cust_alp/p/1031,1150
2 - Change File permissions ( chmod +x setup-1.4.4.14439.bin)
3 - Now you can install so execute this sintaxis : ./setup-1.4.4.14439.bin
4 - When app installation finishes, you must do it with this file into folder installation (chmod +x LenovoEMCStorageManager)
5 - Then to open the app execute it: ./LenovoEMCStorageManager
Video Tutorial
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439
In This second example I installed same version on Ubuntu 13.10. Look at the end of messages of thread and you will see this steps
Install Storage Manager setup-1.4.4.14439.bin in ubuntu.
Attachments:
lenovoemcstoragemanager.jpg ‏27 KB

Hello everyone ,
I have a lenovo px4-300d, I'm on Ubuntu 13.10 64bits with Gnome 3 as GUI and I'm trying to install the LenovoEMC storage Manager but it failed :
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Graphical installers are not supported by the VM. The console mode will be used instead...
Preparing CONSOLE Mode Installation...
===============================================================================
Choose Locale...
    1- Deutsch
   ->2- English
    3- Español
    4- Français
    5- Italiano
    6- Nederlands
    7- Português (Brasil)
    8- Svenska
CHOOSE LOCALE BY NUMBER: 2
=======================================================
Installer User Interface Mode Not Supported
The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
=======================================================
Is it still aproblem with the 64 bits architecture ?
Have you find any solutions ? Thank you very much

Ms Sql Management Studio 2014 Express + Azure

Hi everyone
I have SSMS 2014 Express and I use Azure SQL DB with SQL Database Update V12 (preview).
Now I have the restricted access to my DB from ssms, but there (http://blogs.msdn.com/b/sqlreleaseservices/archive/2014/12/18/sql-server-2014-management-studio-updated-support-for-the-latest-azure-sql-database-update-v12-preview.aspx) talks about the enhanced
functionality. I can not find this update for ssms. Please help me, where I can get this update?

I have installed MS SQL Management Studio 2014. After that I have installed CU5 from link in your previous post.
There was no change. After your last post I have installed
CU6, but again there was no change.
Now I have this:
MS SQL Management Studio about window:
In Azure:
I'm sorry for russian language in screenshot, I don't know how to change it to english.
No error occurs.
GUI can not do anything with the database
in Azure. I can only see the list
of tables, and I can do a sql queries.
But in the local database in the GUI
all the features are present
Hi AndrewG42,
I notice that you are using the latest version of SQL Azure database (13.0.15). I suspect there’s no update in SSMS 2014 for this version of SQL Azure database.
In other words, these features (select top 1000 rows, table designer, etc) are only going to be present with SSMS connecting to Azure v12 which version number is 12.0.2000.8.
Personally, regarding to above issue, I recommend you submit a feedback at
http://feedback.azure.com/forums/34192--general-feedback. Your feedback is valuable for us to improve our products and increase the level of service provided.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

[Solved] can't enter package management in latest version of Emacs

When I try to do something like 'package-install' or 'list-packages' in the latest version of Emacs, it refuses, complaining:
Lisp error: (void-function package-desc-vers)
package-desc-vers([(0 0 1) nil "Matrix themed Zone mode" tar])
ad-Advice-package--add-to-archive-contents(#[514 "@A\303H\304\305A\306HA\307H A\310H \311\fAG\312V\205*
Last edited by emacsomancer (2014-12-15 15:21:51)

Do you have an older version of melpa in your load-path (e.g. .emacs.d/elpa/melpa-x.x) over-riding the built-in package management in later versions of emacs?
If so, delete the melpa-x.x directory and restart emacs.

Print Color Management Problem ?

I have a print color management problem I cannot solve. It reminds me of the print color management problem I had over a year ago when the compatibility conflict between LR and MAC Leopard produced horrible prints. I have Snow Leopard now and been out of the country for some months and yesterday when I tried to make some prints the same problem reemerged. So I downloaded current drivers (and ICCsfor Premium Luster) from Epson and LR 2.6 and spent a good part of the day with Martin Evening's book. I followed (I think) his instructions to make the basic print step by step but the prints still were terrible. My problem is with the color management pop up in the print settings dialog -- it says "color matching" not color management and I cannot check either "no color management " if I want LR to control the process (Kelby) or check "color sync" if I want my Epson R800 take over. I have no idea where the "color management" pop up went. I'm clueless as usual and probably omitting a step because of frustration or brain numbness. Any help would be appreciated. WJS

The settings in Lightroom are simple. and contain in the Print Job panel in the Print module. You either select manage in printer (and then select the profile in the printer drivers) or select the profile here and then turn of all colour management in the printer drivers. The second option will usually produce the best results. What you don't want is to have the profile selected in both LR and the printer drivers, so if the driver doesn't have an option to turn of colour management then you may be forced down the first route. However it would be an unusual decision for a printer manufacturer to make drivers that can't turn off colour management, so you may wish to ask how to do it to your printer manufacturer or check the printers handbook.

DPM console not connecting . Error- Cannot connect to Data Protection Manager. This version of DPM is not supported with Central Console Client (ID : 33345) DPM console not connecting

I am having problem connecting the DPM console to ther server. It gives me following error -
"Cannot connect to Data Protection Manager. This version of DPM is not supported with Central Console Client (ID : 33345)"
The server is DPM R2 and the same console is working on one other computer.
Any idea how to solve the problem?
Thanks

Hi
Please make sure you have both versions of Microsoft Visual C++ 2008 Redistributable installed..
Also make sure you have .netframework 2 installed. If you look at the dpm logs it should say what is missing.

Migrating Rule manager from Endeca version 2.1.2 to Endeca V 11.0

Hi All,
I am trying to migrate rules in Rule manager from Endeca version 2.1.2 to Endeca v11.0.
After migration, all the rules show up correctly in Rule Manager in 11.0.
Rules on 11.0 are using cartridge type "LegacyRule" which was created by migration script.
But when I check supplemental objects in endeca_jspref, I do not see any properties from the cartridge.
Only properties which are displayed are endeca's internal properties. I have pasted one such supplemental object below.
Does anybody have idea on why MDEX in v11.0 is not returning cartridge properties?
On 3.1.2, all the cartridge properties and record IDs are coming in property called "endeca.internal.content.embedded" property. This is property is coming in v11.0.
Here is what I see in endeca_jspref.
Supplemental Object # 2
NAVIGATION REFERENCES:
http://localhost:8006/endeca_jspref/controller.jsp?sid=14759D256CD8&enePort=15002&eneHost=localhost&N=0
RECORDS:
(No Records Specified)
PROPERTIES:
Title:
Test
Style:
Zone:
xmgr_zone
endeca.internal.date.created:
2014-07-21T16:56
endeca.internal.created.by:
admin
endeca.internal.last.modified:
2014-07-21T16:57
endeca.internal.last.modified.by:
admin
endeca.internal.workflow.state:
ACTIVE
endeca.internal.priority:
1
endeca.internal.resource.path:
/content/Test/Test
endeca.internal.templateType:
RecordSpotlightTest
endeca.internal.templateId:
RecordSpotlightTest
DGraph.SeeAlsoPivotCount:
5684
DGraph.SeeAlsoMerchId:
12
TIA,

You will need to use the Assembler. The payload of the triggered rules is no longer returned in the Supplemental Objects.

Recovery Manager & downloading recovery manager problems 2014 version

Similar Messages

Maybe you are looking for