Recovery Manager hangs at "Please insert one of the following media"
Hi,
I'm trying to create a recovery disc for my laptop (HP Pavilion Sleekbook 12-b052ea) but it always hangs at the screen where it asks you to insert either a USB flash drive or discs. I have inserted a Sandisk 32gb USB drive, newly bought especially for this purpose.
Has anyone got any ideas on how to resolve this?
Thanks.
If the Sandisk has the Windows 8 certified logo(on package) that is likely the problem. Windows 8 sees these as another hard drive rather than an external storage device-which is what HP Recovery Creator is looking for.
If the flash drive is Windows 8 certified, I would try to exchange it for an older version without the certification.
Or-you could use this alternate method. I have seen some post success using it-but no reports yet on how well it works-especially of concern to me would be on a new hdd or completely formatted hdd. I have 2 x 32gb flash drives and plan to test it, but haven't yet. I want to make the HP creator set and this set, then format my hdd to test the Microsoft suggested method. That way if it doesn't work on a completely cleared hdd I will have the HP set. I wish I had this done already to be able to say 100% if it is good to go, but time constraints haven't permitted it.Theoretically it should work-but with computers & their un-theoretical behaviors...
Create USB recovery drive in Windows 8 & 8.1:
http://windows.microsoft.com/en-US/windows-8/create-usb-recovery-drive
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**
Similar Messages
-
The Recovery attempt has failed.Sel​ect one of the following buttons:
HP Pavillion DV5-2074dx.Trying to restore system to factory settings with Recovery DVD's from HP. After 2 nd DVD loaded then a Supplemental cd is inserted, then system restarts. Looks like everything is going to continue, loading recovery system, but the a message "Recovery Manager" windows shows with the following message "The Recovery attempt has failed.Select one of the following buttons: Save log Details Retry . If Retry button chosed, program ask to insert the recovery media and restarts and try to reinstall the recovery system again. I tried 3 times already.I cleaned the DVD's , I tried with a New Hard drive, without battery, removed one at the time memory modules and the same resault. Please somebody may have a solution for it???
If your wifi is switched off, this will happen. Check to see if your wifi switch is on, and if not, try it again.
-
other games says this also. firefox is my default browser. Its up todate but yet tells me its on old version I have download the newest Firefox 7 I even deleted and re installed when I go to play some games on facebook this is what it says . Please help me. Thank
Reset the page zoom on pages that cause problems: '''View > Zoom > Reset''' (Ctrl+0 (zero); Cmd+0 on Mac)
See [[Text Zoom]] and [[Page Zoom]] and http://kb.mozillazine.org/Zoom_text_of_web_pages
You can try if it works if you disable OOPP (Out-Of-Process-Plugins) for Flash
You can set the prefs dom.ipc.plugins.enabled.* to false on the about:config page to disable the plugin-container process.
dom.ipc.plugins.enabled (currently false by default)
dom.ipc.plugins.enabled.npswf32.dll (Flash)
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page. -
Discovery data couldn't be inserted to the database. This could have happened because of one of the following reasons:
- Discovery data is stale. The discovery data is generated by an MP recently deleted.
- Database connectivity problems or database running out of space.
- Discovery data received is not valid.
The following details should help to further diagnose:
DiscoveryId: ae39d630-f82d-77ee-d5d9-dd4c4a2e7bc2
HealthServiceId: ab069276-c6dc-13d7-3ef5-28e780c34953
Microsoft.EnterpriseManagement.Common.DiscoveryDataUnresolvedClassPropertyNameException,Unable to resolve the class property name specified in the discovery data item. Try using a fully qualified name.
Class property name: 12f3e541-ec4d-7310-be57-fa3bde0bed06
Rule ID: ae39d630-f82d-77ee-d5d9-dd4c4a2e7bc2
Instance:
<?xml version="1.0" encoding="utf-16"?><ClassInstance TypeId="{6ce7ab22-1880-0eb1-40ba-86d9a8c3d5f5}"><Settings><Setting><Name>0b3944af-12ff-1e1f-ac5c-55485fc10671</Name><Value>MANAGED
REAL TIME APPLY</Value></Setting><Setting><Name>12f3e541-ec4d-7310-be57-fa3bde0bed06</Name><Value>rac2</Value></Setting><Setting><Name>18900065-cbab-1788-0c0e-2c97ef41d7d2</Name><Value>LGWR</Value></Setting><Setting><Name>1a42a2bc-9e87-029a-6db6-f512f8d00ca2</Name><Value></Value></Setting><Setting><Name>5c92d602-346f-9202-e2b4-7cfdc7226661</Name><Value>Common</Value></Setting><Setting><Name>5e763b8d-1979-d0e9-08bf-ea857c67fbaa</Name><Value></Value></Setting><Setting><Name>7dd3b6cb-8180-d58a-fae2-985730c3ffb8</Name><Value></Value></Setting><Setting><Name>7ecb288d-50c8-dd5b-419f-5d4712ef4b75</Name><Value>Database
Physical</Value></Setting><Setting><Name>8c62b4e5-a737-b8d7-9017-4e8ea4c5a4ac</Name><Value></Value></Setting><Setting><Name>99cdac55-6b00-2485-cb26-bed62d37c926</Name><Value>Common</Value></Setting><Setting><Name>9ed7463c-fa1e-00ea-6743-5e54b928b7e8</Name><Value></Value></Setting><Setting><Name>a606d019-eff4-c6b9-eec9-32d43913fa58</Name><Value>DatabasePhysicalMP</Value></Setting><Setting><Name>aa9fbc8a-e274-91e8-7731-ba324682cab9</Name><Value>DatabasePhysical</Value></Setting><Setting><Name>afb4f9e6-bf48-1737-76ad-c9b3ec325b97</Name><Value>rac2</Value></Setting><Setting><Name>b60a9e0e-5baa-9b0a-8201-6ddd697d060d</Name><Value></Value></Setting><Setting><Name>bf194186-a061-ccf1-94de-971988a79003</Name><Value></Value></Setting><Setting><Name>c2ec02fc-fa4d-65c9-82da-fa76476433eb</Name><Value>rac2</Value></Setting><Setting><Name>d87b0cd0-2149-5736-ab85-42ebddab12a2</Name><Value></Value></Setting><Setting><Name>e1165cbd-8778-5bc1-de07-af341d420068</Name><Value>GRD</Value></Setting><Setting><Name>f56fc436-4a31-48dc-3127-745e5a6d2800</Name><Value></Value></Setting><Setting><Name>fda3d28f-3f34-e51c-e1ad-b1413a70c4ac</Name><Value>GUARD</Value></Setting></Settings></ClassInstance>.Try to reimport the MP. You should use the following sql to query the problematic MP
select d.discoveryid, d.discoveryName,mp.mpfriendlyname from discovery d inner join managementpack mp on d.managementpackid=mp.managementpackid where d.discoveryid='ae39d630-f82d-77ee-d5d9-dd4c4a2e7bc2'
Discovery data couldn't be inserted to the database: Event IDs: 33333 and 10801
http://social.technet.microsoft.com/Forums/en-US/operationsmanagergeneral/thread/5f826064-d3f5-43f0-a328-c2f3eb56e932
Insert Discovery Data Fails
http://social.technet.microsoft.com/Forums/en-US/operationsmanagerauthoring/thread/8b1387f0-ca4a-480b-a0f0-557d14c3fa89
Event ID: 10801 in RMS server
http://social.technet.microsoft.com/forums/en-us/operationsmanagergeneral/thread/5467A6A7-0B26-45C1-BF69-368E5A7AB841
Roger -
Cannot download trial version of Livecycle Designer:
I select English windows then click download. It then takes me to this page.
Error We're sorry, we encountered an error processing your request. Please try your request again. You may wish to try one of the following links:
What gives?????I get this same error message when I try to download it, but I have purchased the full version and have a license key. I get this error screen when I try to download it from both Safari and Chrome on a Mac running OSX. A screenshot is attached.
-
PLS-00103: Encountered the symbol "" when expecting one of the following:
Hi I am creating trigger using CFQUERY tag of cold fusion on oracle..
<CFQUERY DATASOURCE="CRM">
create or replace trigger AWC_ACCESSROLESID_TRI
before insert on AWC_ACCESSROLES
for each row
begin
select AWC_ACCESSROLESID_SEQ.nextval into :new.AR_ID from dual;
end;
</CFQUERY>
But the created trigger is not compiled, it is giving the following error
"Line # = 1 Column # = 6 Error Text = PLS-00103: Encountered the symbol "" when expecting one of the following: begin case declare exit for goto if loop mod null pragma raise return select update while with <an identifier> <a double-quoted delimited-identifier> <a bind variable> << close current delete fetch lock insert open rollback savepoint set sql execute commit forall merge <a single-quoted SQL string> pipe The symbol "" was ignored."
If I edit that trigger in enterprose manager console by pressing space and compile that, it is working fine with out any error. If i run the above statement in sql *plus, It is working fine with out any error.
Can you please tell me why this is happening if i run it using cfquery tag and also the possible solutions.
Thanks in advance,
VinodSo it works in Enterprise manager. It works in SQL*Plus. It doesn't work in CFQUERY. Sounds to me like a ColdFusion problem rather than an Oracle problem to be honest. Aren't there any ColdFusion support resources?
Cheers, APC -
Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
bei System.Windows.Forms.Control.NotifyEnter()
bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.IO.UnmanagedMemoryStream.ReadByte()
bei System.IO.BinaryReader.ReadByte()
bei System.IO.BinaryReader.Read7BitEncodedInt()
bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.Reflection.RuntimeParameterInfo.get_Name()
bei System.Diagnostics.StackTrace.ToString(TraceFormat)
bei System.Environment.GetStackTrace(System.Exception, Boolean)
bei System.Exception.GetStackTrace(Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Hi
I have installed coheI have installed coherence server "fmw_12.1.3.0.0_coherence_Disk1_1of1.zip" along with Examples on windows machine and C++ client coherence-cpp-12.1.3.0.0b51709-windows-x86-vs2012.zip on the same machine.
I have built the "contacts" C++ Example successfully and while I execute this "contacts" using run I am facing TcpAcceptor error.
On my coherence server the TcpAcceptor is listening on port 8088, so I have modified the extend-cache-config.xml file with values "ip address of my windows machine" and port as "8088".
All the time I am getting below error,
coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpAcceptor
at class coherence::lang::TypedHandle<class coherence::component::net::extend::PofConnection> __thiscall coherence::component::util::TcpInitiator::openConne
ction(void)(TcpInitiator.cpp:307)
at coherence::component::util::TcpInitiator::openConnection
at coherence::component::util::Initiator::ensureConnection
at coherence::component::net::extend::RemoteCacheService::openChannel
at coherence::component::net::extend::RemoteService::doStart
at coherence::component::net::extend::RemoteService::start
at coherence::component::util::SafeService::startService
at coherence::component::util::SafeService::restartService
at coherence::component::util::SafeService::ensureRunningServiceInternal
at coherence::component::util::SafeService::start
at coherence::net::DefaultConfigurableCacheFactory::configureService
at coherence::net::DefaultConfigurableCacheFactory::ensureService
at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
at coherence::net::DefaultConfigurableCacheFactory::configureCache
at coherence::net::DefaultConfigurableCacheFactory::ensureCache
at coherence::net::CacheFactory::getCache
at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void> >::sizeOf(bool)
at _onexit
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at BaseThreadInitThunk
at RtlInitializeExceptionChain
at RtlInitializeExceptionChain
on thread "main"
Caused by: coherence::net::messaging::ConnectionException: coherence::component::util::TcpInitiator::TcpConnection@029EAD78{Id=NULL, Open=1, LocalAddress=NULL,
RemoteAddress=10.242.152.242/10.242.152.242:8088}: socket disconnect
at class coherence::lang::TypedHandle<class coherence::net::messaging::Response> __thiscall coherence::component::net::extend::AbstractPofRequest::Status::g
etResponse(void)(AbstractPofRequest.cpp:203)
at coherence::component::net::extend::AbstractPofRequest::Status::getResponse
at coherence::component::net::extend::AbstractPofRequest::Status::waitForResponse
at coherence::component::util::Initiator::openConnection
at coherence::component::net::extend::PofConnection::open
at coherence::component::util::TcpInitiator::openConnection
at coherence::component::util::Initiator::ensureConnection
at coherence::component::net::extend::RemoteCacheService::openChannel
at coherence::component::net::extend::RemoteService::doStart
at coherence::component::net::extend::RemoteService::start
at coherence::component::util::SafeService::startService
at coherence::component::util::SafeService::restartService
at coherence::component::util::SafeService::ensureRunningServiceInternal
at coherence::component::util::SafeService::start
at coherence::net::DefaultConfigurableCacheFactory::configureService
at coherence::net::DefaultConfigurableCacheFactory::ensureService
at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
at coherence::net::DefaultConfigurableCacheFactory::configureCache
at coherence::net::DefaultConfigurableCacheFactory::ensureCache
at coherence::net::CacheFactory::getCache
at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object
,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void
,void,void,void> >::sizeOf(bool)
at _onexit
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at BaseThreadInitThunk
at RtlInitializeExceptionChain
at RtlInitializeExceptionChain
on thread "main"
Caused by: coherence::io::IOException: socket disconnect
at unsigned int __thiscall coherence::net::Socket::readInternal(unsigned char *,unsigned int)(Socket.cpp:333)
at coherence::net::Socket::readInternal
at coherence::net::Socket::SocketInput::read
at coherence::io::BufferedInputStream::fillBuffer
at coherence::io::BufferedInputStream::read
at coherence::component::util::TcpInitiator::readMessageLength
at coherence::component::util::TcpInitiator::TcpConnection::TcpReader::onNotify
at coherence::component::util::Daemon::run
at coherence::lang::Thread::run
on thread "ExtendTcpCacheService:coherence::component::util::TcpInitiator:coherence::component::util::TcpInitiator::TcpConnection::TcpReader"We are facing same issue. Could you please provide us any working .Net sample code for the version 12.1.2.0.
<ssl>
<protocol>Tls</protocol>
<local-certificates>
<certificate>
<url>c:\Cert\</url>
<password>password</password>
<flags>DefaultKeySet</flags>
</certificate>
</local-certificates>
</ssl>
thanks
Bala -
Please suggest corrections to the following code
Hi,
Please find the error in following PL/Sql code and suggest the corrections.
I want to use this code on form-trigger level to display error messages in middle of the screen.
When I compile this code in ONERROR trigger, it is showing compiling errors.
Code:
ERR_VAL NUMBER(5):= NVL(ERR_IN,ERROR_CODE);
MSG VARCHAR2(150) := NVL(MSG_IN,SUBSTR(' '||ERROR_TYPE||'-'
||TO_CHAR(ERR_VAL)||': '||ERROR_TEXT,1,150));
Compilation time errors:
Error 103 at line 1,column9
Encountered the symbol NUMBER when expecting one of the following:
:= [ @ %
the symbol = was substituted for NUMBER to continue
Error 103 at line 1, column 27
Encountered the symbol= when expecting one of the following:
.[=%=.+</> in mod not rem an exponent(**)
<> or !=~=>=<=<> and or like between is null is not ||
is dangling
the symbol was inserted before= to continue.
Error 103 at line2, column5
Encountered the symbol VARCHAR3 to continue.
Error 103 at line2,column 20
Encountered the symbol= when expecting one of the following:
.[=%=.+</> in mod not rem an exponent(**)
<> or !=~=>=<=<> and or like between is null is not ||
is dangling
the symbol was inserted before= to continue.Here's the code I use in a Forms ON-Error trigger.
Dave
DECLARE
errnum NUMBER := ERROR_CODE;
errtxt VARCHAR2(80) := ERROR_TEXT;
errtyp VARCHAR2(3) := ERROR_TYPE;
BEGIN
Message(errtyp||'-'||TO_CHAR(errnum)||': '||errtxt);
Message(' ');
RAISE Form_Trigger_Failure;
END; -
PLS-00103: Encountered the symbol "SELECT" when expecting one of the follow
Can any one tell me why I an getting compile error in Trigger with the following code (see below for the error message). Error is indicated in the IF statement Select clause.
Code:
-- AUdit Code Begin
-- Note: Ony for those tables having 'AUDIT' UDP
-- Value set to 'T'
IF (Select Count(*) From DBConfiguration
Where ConfigurationCode = 'AUDIT' AND
ConfigurationValue = 'T') > 0 THEN
WHEN (:new.WORKREQUESTSTATUS <> :old.WORKREQUESTSTATUS)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSTATUS',
:old.WORKREQUESTSTATUS,:new.WORKREQUESTSTATUS,:new.UserId)
End;
WHEN (:new.WORKREQUESTSOURCE <> :old.WORKREQUESTSOURCE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCE',
:old.WORKREQUESTSOURCE,:new.WORKREQUESTSOURCE,:new.UserId)
End;
WHEN (:new.WORKREQUESTSOURCEID <> :old.WORKREQUESTSOURCEID)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCEID',
:old.WORKREQUESTSOURCEID,:new.WORKREQUESTSOURCEID,:new.UserId)
End;
WHEN (:new.WORKREQUESTDESC <> :old.WORKREQUESTDESC)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDESC',
:old.WORKREQUESTDESC,:new.WORKREQUESTDESC,:new.UserId)
End;
WHEN (:new.WORKREQUESTDATE <> :old.WORKREQUESTDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDATE',
CAST(:old.WORKREQUESTDATE AS varchar2(256)),CAST(:new.WORKREQUESTDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.WORKREQUESTOWNER <> :old.WORKREQUESTOWNER)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTOWNER',
:old.WORKREQUESTOWNER,:new.WORKREQUESTOWNER,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPCODE <> :old.WORKREQUESTAPPCODE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPCODE',
:old.WORKREQUESTAPPCODE,:new.WORKREQUESTAPPCODE,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPROVER <> :old.WORKREQUESTAPPROVER)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPROVER',
:old.WORKREQUESTAPPROVER,:new.WORKREQUESTAPPROVER,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPDATE <> :old.WORKREQUESTAPPDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPDATE',
CAST(:old.WORKREQUESTAPPDATE AS varchar2(256)),CAST(:new.WORKREQUESTAPPDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.WORKREQUESTCOMMENT <> :old.WORKREQUESTCOMMENT)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTCOMMENT',
:old.WORKREQUESTCOMMENT,:new.WORKREQUESTCOMMENT,:new.UserId)
End;
WHEN (:new.CLOSEDATE <> :old.CLOSEDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'CLOSEDATE',
CAST(:old.CLOSEDATE AS varchar2(256)),CAST(:new.CLOSEDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.ANALYTEKEY <> :old.ANALYTEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'ANALYTEKEY',
CAST(:old.ANALYTEKEY AS varchar2(256)),CAST(:new.ANALYTEKEY AS varchar2(256)),:new.UserId)
End;
WHEN (:new.SUBPURPOSEKEY <> :old.SUBPURPOSEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'SUBPURPOSEKEY',
CAST(:old.SUBPURPOSEKEY AS varchar2(256)),CAST(:new.SUBPURPOSEKEY AS varchar2(256)),:new.UserId)
End;
WHEN (:new.PURPOSEKEY <> :old.PURPOSEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'PURPOSEKEY',
CAST(:old.PURPOSEKEY AS varchar2(256)),CAST(:new.PURPOSEKEY AS varchar2(256)),:new.UserId)
End;
End if;
-- Audit End
Error:
95/5 PLS-00103: Encountered the symbol "SELECT" when expecting one of the following:
( - + case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
<an alternatively-quoted string literal with character set specification>
<an alternativ
97/39 PLS-00103: Encountered the symbol ")" when expecting one of the following:
* & - + ; / at for mod remainder rem <an exponent (**)> and
or group having intersect minus order start union where
connect || multisetHere is the code:
-- AUdit Code Begin
-- Note: Ony for those tables having 'AUDIT' UDP
-- Value set to 'T'
IF (Select Count(DBConfigurationValue) From DBConfiguration
Where DBConfigurationCode = 'AUDIT' AND
DBConfigurationValue = 'T') > 0 THEN
WHEN (:new.WORKREQUESTSTATUS <> :old.WORKREQUESTSTATUS)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSTATUS',
:old.WORKREQUESTSTATUS,:new.WORKREQUESTSTATUS,:new.UserId)
End;
WHEN (:new.WORKREQUESTSOURCE <> :old.WORKREQUESTSOURCE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCE',
:old.WORKREQUESTSOURCE,:new.WORKREQUESTSOURCE,:new.UserId)
End;
WHEN (:new.WORKREQUESTSOURCEID <> :old.WORKREQUESTSOURCEID)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCEID',
:old.WORKREQUESTSOURCEID,:new.WORKREQUESTSOURCEID,:new.UserId)
End;
WHEN (:new.WORKREQUESTDESC <> :old.WORKREQUESTDESC)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDESC',
:old.WORKREQUESTDESC,:new.WORKREQUESTDESC,:new.UserId)
End;
WHEN (:new.WORKREQUESTDATE <> :old.WORKREQUESTDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDATE',
CAST(:old.WORKREQUESTDATE AS varchar2(256)),CAST(:new.WORKREQUESTDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.WORKREQUESTOWNER <> :old.WORKREQUESTOWNER)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTOWNER',
:old.WORKREQUESTOWNER,:new.WORKREQUESTOWNER,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPCODE <> :old.WORKREQUESTAPPCODE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPCODE',
:old.WORKREQUESTAPPCODE,:new.WORKREQUESTAPPCODE,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPROVER <> :old.WORKREQUESTAPPROVER)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPROVER',
:old.WORKREQUESTAPPROVER,:new.WORKREQUESTAPPROVER,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPDATE <> :old.WORKREQUESTAPPDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPDATE',
CAST(:old.WORKREQUESTAPPDATE AS varchar2(256)),CAST(:new.WORKREQUESTAPPDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.WORKREQUESTCOMMENT <> :old.WORKREQUESTCOMMENT)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTCOMMENT',
:old.WORKREQUESTCOMMENT,:new.WORKREQUESTCOMMENT,:new.UserId)
End;
WHEN (:new.CLOSEDATE <> :old.CLOSEDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'CLOSEDATE',
CAST(:old.CLOSEDATE AS varchar2(256)),CAST(:new.CLOSEDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.ANALYTEKEY <> :old.ANALYTEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'ANALYTEKEY',
CAST(:old.ANALYTEKEY AS varchar2(256)),CAST(:new.ANALYTEKEY AS varchar2(256)),:new.UserId)
End;
WHEN (:new.SUBPURPOSEKEY <> :old.SUBPURPOSEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'SUBPURPOSEKEY',
CAST(:old.SUBPURPOSEKEY AS varchar2(256)),CAST(:new.SUBPURPOSEKEY AS varchar2(256)),:new.UserId)
End;
WHEN (:new.PURPOSEKEY <> :old.PURPOSEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'PURPOSEKEY',
CAST(:old.PURPOSEKEY AS varchar2(256)),CAST(:new.PURPOSEKEY AS varchar2(256)),:new.UserId)
End;
End if; -
Firefox doesn't know how to open this address, because one of the following protocols (itms-services) isn't associated with any program or is not allowed in this context.
You might need to install other software to open this address."
tried to fix in about:config but itms-services not foundn; also tried to fix using network.protocol-handler.external.foo but that wasn't listed either
trying to download an app related to a rewards gift card
firefox and os versions are up to date on MacBook AirHello!
Would you please provide the link you were trying to visit?
Also, you may want to post this question to the [https://support.mozilla.org/en-US/questions/new/desktop Firefox for Desktop Support Forum] . The Mozilla Support volunteers there may be able to better assist you.
I hope we can help you solve your problem. -
When I try to open live hot mail I get this message: The Windows Live Network is unavailable from this site for one of the following reasons:
* This site may be experiencing a problem
* The site may not be a member of the Windows Live Network
You can:
* You can sign in or sign up at other sites on the Windows Live Network, or try again later at this site.
However, when I open hot mail in IE it opens just fine. Tried changing the password as suggested but it did not help in Firefox.Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies" -
We have a new computer and I cannot get my garmin running watch to sync with mozilla. The error message that I keep getting is"The address wasn't understood
Firefox doesn't know how to open this address, because one of the following protocols (connectagent) isn't associated with any program or is not allowed in this context.
You might need to install other software to open this address."
Help pleaseThis is for a special URL that starts with
connectagent://
instead of with
http://
is that right?
Two thoughts:
(1) Could you try changing a setting for your Garmin plugin. Here's what I mean:
Open the Add-ons page using either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Plugins.
Find your Garmin plugin change "Ask to Activate" to "Always Activate".
Your system information seems to list two different versions of a similarly named plugin. I'm not sure whether that is causing a problem.
(2) Does Garmin's documentation specify any extra steps to set up Firefox, other than installing its add-ons? -
Rule Development - "one of the following"
Hi there,
I'm having trouble with my rule base. This should be a basic solution but I can;t think of it. I am writing about Food Claims, and I would like to say:
1) Your food claim is permitted if it is one of the following.....(then list all the options within that if statement).
2) Then, If it is one of the following, does it meet the requirements?
3) If it does not meet the requirements, then you cannot have that food claim on your package.
However, when I am writing my rule base and test it, if the user selects a food claim and it ends up not meeting the requirements, it doesn't say you cant have that on the package, it just goes back to Question 1 and asks if your food claim is the next one on the list?
How do I write my rules so that the user can only select one food claim and see if it meets the requirements? Rather then going through each food claim individually until all options have been investigated.Assuming your rules look something like this:
[conclusion] Your food claim is permitted if
[Level 1] any
[Level 2] your food claim is (option 1) or
[Level 2] your food claim is (option 2) or
[Level 2] your food claim is (option 3)
[Level 1] and
[Level 1] your food claim meets the requirements
[conclusion] Your food claim meets the requirements if
[Level 1] your food claim meets requirement 1 and/or
[Level 1] your food claim meets requirement 2 etc
Or perhaps you have individual rules with the requirements for each option(?). Either way, if the options are mutually exclusive (only one per person) you might want to set them using a single text variable:
[conclusion] your food claim is (option 1) if
[Level 1] the food claim type = "option 1"
[conclusion] your food claim is (option 2) if
[Level 1] the food claim type = "option 2"
That way the interview will collect the food claim type once and set all of your options from there so it won't ask it again. Does that help?
Fiona -
I FINALLY FOUND A WAY TO UNINSTALL "COUPON-DROP-DOWN" ANNOYING POP-UPS.
Disable Or Remove Extensions in Safari
Open Safari.
Click the Safari button, and then click Preferences.
Under Preferences, click Extensions, and then do one of the following:
To disable ALL extensions, click the toggle switch from ON to OFF.
To disable a single extension, click it, and then uncheck the Enable box.
To remove a single extension, click it, and then click the Uninstall button.
Click the X in the top right.Hello Wontsey & Welcome
On 6-4-06 I installed Norton Internet Security 3.0.1 for Mac. I thought maybe my problem was related to the firewall part so I unistalled it and turned the Apple firewall that came with the computer back on.
This did not help. In fact, when I try to open “Help” from the desktop menu the program opens and then immediately closes so I can’t access it.
I hate to have to tell you this Norton is the problem, looking into uninstalling it, the uninstallers that came with it are not effective so no matter you do not have the CD/DVD go to their site to get the Uninstaller
UseCocktail or OnyXto find the invisable files. Just follow Macjacks directive.
This is covered in this Topic thread,abandoning Norton Internet Security see the files Macjack speaks of in the topic thread. If you have questions post in the same forum a new topic this thread is archive, click on the link and then click"back to topic list". This is why i first came to Apple discussions, to get help with the mess Norton can make on Panther and found help as you will. It is not a Safari issue per say, rather a Norton problem.
Best of luck.
Regards; )
Eme~
Maybe you are looking for
-
JCOProxy error while calling a RFC
Hi, When i tr to call a RFC "CBIF_GLM1_BATCH_READ", i get a fatal error.The error message is: "JCOProxy error: Problem retrieving JCO.Function object." When i checked if i was able to connect to any of the functions other than BAPI's i got the sam
-
Geração do SPED Fiscal com crédito de ICMS em outras Base.
Bom dia Pessoal. Gostaria de saber se alguém de vocês passou pela a seguinte situação abaixo. Ao gerar o arquivo de SPED na transação j_1befd o registro C190 esta sendo carregado para a seguinte situação abaixo, sendo assim não deveria esta sendo cre
-
Header in FRS using HFM as data source
In my header, i need to display comparative years ie 2008 and 2009. I can get 2009 using POVDescription function but how can i display the prior year?
-
Default swatch application - fill vs line?
Hi, normally when I select a swatch for an object the default was to apply it to the fill color. I don't know why but it started applying a swatch when selected to the outline/stroke instead. How can I change the default application of swatches back
-
Measuring with both channels of virtual bench simultaneously in labview, error 375903
Hi, I am trying to perform two measurements simultanously using both channels of the Virtual Bench's analog input. I have selected MSO channel 1 and 2 for the measurements yet I am getting error 375903 returned evewry time saying the resource request