Recovery Manager not running from BIOS prompt.

I am attempting to fix a G62-107SA following an earlier botched recovery. The recovery partition appears to be in place and I want to recover the laptop from there using the BIOS (?) prompt. Although several other options work OK from this BIOS menu, press f11 while the “Press<F11> for recovery” does not.
Is it because the Recovery Manager may have been deleted and if so, how can I restore it and where can the program be downloaded?

I assume the owner has not burned a Recovery Disc set? You can usually order Recovery Discs for less than $20. Contact HP Support in your country /region to order a set. Worldwide contact info can be accessed here>>Contact HP
One other thing you might try in the meantime is to boot from a utilty cd and mark the Recovery partition as Active. On reboot it should boot into Recovery. If you don't have a utilty cd capable of this_
scroll down on this page and get>> Bootable CD and>> ImgBurn to burn the iso image to cd-a guide on using ImgBurn to write an ISO to a disc is> Here. Once created, boot from it. Delete any hdd partitions, create one and format. Next try booting from Recovery again.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

HP Pavilion dv6-6181TX. System Recovery is not working From HP Recovery Manager.

HP Pavilion dv6-6181TX
Product No. A3U49PA
Genuine Windows 7 Home Premium 64
(but i upgraded it to windows 7 ultimate)
System Recovery is not working From HP Recovery Manager. so i cant restore my laptop to its original factory condition. (Genuine Windows 7 Home Premium).
so when i restart my computer and press Esc and then choose F11 i get this message :
"Windows failed to start. A recent hardware or software change might be the
cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer
manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000225
Info: An error occured while attempting to read the boot configuration data."
i saw this from the forum
http://h30434.www3.hp.com/t5/Notebook-Recovery/Hp-recovery-manager-problems/m-p/2395473/highlight/tr...
Had the C partition been split/shrunk to form a new partition previously?
Does disk management show the HDD as basic or dynamic? (Start>Right-click Computer>Manage>disk management on the left).
If it has been switched to dynamic (Windows does this automatically when more than 4 partitions are present on the disk), then the F11 recovery partition won't function until it is restored to basic, but I would like to confirm that is the scenario before providing those steps.
The Disk management shows that my HDD as Dynamic, what should i do then if this is the case and the possible solution to my problem?
please help me & Thank you for your time,
This question was solved.
View Solution.

If you have more than 4 partitions you will need to delete the extra partition/partitions, then convert the hdd back to Basic.
Older versions of Partiton Wizard Free work:
http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

[solved] To display Processes which are not running from constant process

i have constant processes prostat1,prostat2,prostat3,prosta4,prostat6,prostat8,prostat9 (6 processes) runs to support the application
Now my problem is
i want to display the process which is not running (from the above 6 processes)
Thanks in advance

Try this
echo "Constant processes not running"
echo
for PROC in prostat1 prostat2 prostat3 prostat4 prostat6 prostat8 prostat9
do
        if [ ! "`ps -ef | grep $PROC | grep -v grep`" ]; then
                echo $PROC
        fi
doneBTW, those are 7....:-)

Recovery Manager not present and cannot install it

I am working on a friend's computer as a favor as he knows nothing about computers. I know some, but not much/enough about HP's. Windows failed so I entered Recovery Manager (f11) and made a backup image ( it had never been done on this computer) to a USB, Sony 32 gb. When I tried to boot from the USB during system recovery it would not boot. I tried changing BIOS settings removing protected boot and switching to legacy boot device, but it still would not boot. So I had downloaded a Win 8 install ios, burnt it to a DVD. It installed Win 8.1 fine, but it did not allow me back into Recovery Manager. I tired to use the Restore System but it still did not boot from the USB. Recovery Manager does not run. The restore partition is intact on the hard drive, so I have been trying to reinstall Recovery Manager with Windows running from RM/Tools/Rita-Tools/HPRecovery.exe. It will not finish installing RM. So I tried to install it from SW setup/RM4Win/installer.msi, but gives me "a script for this install to complete could not run. Contact your support or package vendor." Another time I tried it said the path was incorrect. I even tried copying the recovery image from the USB to the RM folder on the recovery partition but that gives me an incorrect path message too. I tried to find a file suggested on C;\Program files (x86)/Hewlett-Packard/HPRecovery Manager/Rebecca.exe but it is not there. I read that some USB's are not compatable but it did not giv e a compete list, only a few examples. Don't know where to find that list so I can buy another USB and copy the image over to it. Please, anyone, who actually with some indepth experience, would you help? I don't have much hair left from pulling it out.

WHen you get trouble with msi files you usually need the Microsoft Installer cleanup utility.
Here is a method for removal of iTunes and related programs with clean up and reinstall.
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program. The installer doesn't give any message to confirm the installation.
http://support.microsoft.com/kb/290301/
(To run the program – All Programs>>Windows Install)
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes.

Satellite M30X-129: Can recovery CD be run from an external drive?

My wifi appears to have packed up - recognises wireless networks nearby but won't connect to them - so I am trying to use the Product Recovery disc in the hope that this might restore the wifi.
However, the DVD Multi Drive is not working properly - the light flickers briefly to indicate some sort of activity but no disc shows up in My Computer. I'm thinking that if I buy the External Drive, I can run the Product Recovery disc from this.
Is the Toshiba External DVD SuperMulti Drive (PA3454U-1DV2) compatible with the Satellite M30X-129 P-M 735? Can Product Recovery be run from an external (bootable?) drive?
Any advice would be greatly appreciated!!!

Hi
According to this Toshiba page the drive is compatible with your unit:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/options_and_accessories_search_by_model.jsp?servic e=EU&selSeries=-1&selFamily=2326&selCategory=2319&family=2326&selP roduct=98795
The fact is that only this boot device options are available: USB-FDD/HDD/ODD/LAN
I know that you can only boot from the external CD/DVD drive if the device support this option and the unit.
In my opinion to be100% sure you should ask the ASP for the opinion.
But know another question: Did you boot from the recovery CD to recover the OS?
If you want to recover the OS you have to boot from this CD and not to start it under Windows. Check it

Battery shows as having charge in System Profiler yet will not run from bat

My MacBook is about a year and half old. My battery just started doing this a few days ago. It shows as not charging. Checking the battery shows that it has 85% power left (this was 86% the day it started). The magsafe connector stays green. The MacBook will not run without the power connected.
I am not sure if this is an issue with the battery, the batteries connector, or with my MacBook. I'm pretty tight fro cash right now and need my MacBook working. I don't have money to throw at parts I don't need. If anyone has experienced this issue before and has any insight please let me know. I'm a starving web programmer and I need to be able to bring my MacBook with me to meet with clients.
Thanks,
Steven
Battery Information:
Model Information:
Serial Number: DP-ASMB016-3738-3b2a
Manufacturer: DP
Device name: ASMB016
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 102a
Hardware Revision: 0500
Cell Revision: 0102
Charge Information:
Charge remaining (mAh): 4211
Fully charged: No
Charging: No
Full charge capacity (mAh): 4939
Health Information:
Cycle count: 232
Condition: Good
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 12158
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 20
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: No

Do you think it is software. It will not even boot when the power is not connected. I was thinking it was a problems with ACPI in the EFI BIOS. The strange thing is just a moment ago the magsafe went orange and the power states calculating. This is the first time I've seen the magsafe orange since this started four days ago. I came back to this thread to update it with this little tidbit and saw your reply.
This is my current power information from system profiler:
Battery Information:
Model Information:
Serial Number: DP-ASMB016-3738-3b2a
Manufacturer: DP
Device name: ASMB016
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 102a
Hardware Revision: 0500
Cell Revision: 0102
Charge Information:
Charge remaining (mAh): 4199
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 4939
Health Information:
Cycle count: 232
Condition: Good
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 12148
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 20
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: Yes

HP pavilion G6 Recovery manager not accepting restore OS after replacement of motherboard

Hi,
My laptop is HP pavilion G6 with WIN 8 OS.
Recently my laptop motherboard, processor, Hard disc were replaced with another mother board and upgraded processor from AMD A4 to AMD A8 and hard disk as well due to some technical problems araised in the laptop. But these changes made by Reliance digital through HP service only. Unfortunately they had installed an unlicensed win 8 version and they said that my recovery DVDs won't work with existing hardware changes. Even though i am trying to installing the previos win 8 OS from recovery DVDs, HP recovery manager is not accepting to install Orginal Win 8. Can any one solve this issue to restore my old original OS from recovery DVDs or suggest me for the best.
Thanks in advance,
Santosh A

Yes, before Windows logo. At the first screen after powering on the machine tap Esc to bring up the Menu- same screen where you use Esc + F11 for Recovery.
Diagnostics is helpful many times in troubleshooting issues-such as testing memory or Hard drive.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

C program not running from terminal as expected

Hi everyone
I am starting C programming as part of my university degree, I understand most of the content so far. I am compiling and running my program in Terminal and I am having a small amount of trouble with running it. Here is how I have set my program up:
• Created folder named "C" on the desktop
• Opened terminal and changed the directory by using the following command: cd /Users/jc/Desktop/C, the directory is changed as the terminal output reads:
JCs-MacBook-Pro:C jc$
• Created main.c file
• Compiled fine in terminal by using: cc main.c
Here is where it breaks down, typing a.out does not run the program (as I expected) but returns the error: "-bash: a.out: command not found", if I drag the file to terminal or type out the absolute path and execute the program runs fine. What is happening and how do I fix it so typing just a.out runs the program?
Thanks in Advance
J.C

The commands to add a folder to your search path (if you haven't changed your shell from the default bash) are:
PATH=$PATH:<absolute path to parent folder>/MyProjectFolder
export PATH
Typing the above at your terminal prompt should allow you to execute your programs without typing ./a.out, but only for the life of the current terminal session (You can type 'printenv' or 'echo $PATH' to verify that your folder was added correctly).
If you wish to add your folder automatically to any terminal session, the above should be saved in a text file named '.profile' in your home folder (the folder you're in when you start Terminal, e.g. /users/raynewbie).
If you wish to add whatever folder is current (wherever I am right now) to your permanent search path, insert the following into .profile:
PATH=$PATH:.
export PATH
The above has the disadvantage of being less secure on multiuser systems. The current, "dot", directory used to be first in the default Unix search path. But when I was in school (during the Lincoln administration) our favorite sport was trying to hack root perms by placing our own version of 'ls' in directories frequented by superusers. Higher powers caught on to this after only a few years and newer systems required you to type the dot.

SignTool.exe verify /pa returns exit code 1 from the code but works fine while running from command prompt

Hi,
I am using SignTool.exe from a new Process() to verify a codesigned assembly and it returns the exit code 1 whereas it returns exit code 0 while i run the same from Visual Studio Command prompt. Please let me know your thoughts...
Here is my code snippet from VS2012 ultimate on Win7 PC.
p = new Process();
p.StartInfo.FileName = "C:\\Program Files (x86)\\Microsoft SDKs\\Windows\\v7.0A\\Bin\\SignTool.exe";
string args = @"verify";
p.StartInfo.Arguments = args + " "+ "/pa " + "/v "+ name;
p.Start();
p.WaitForExit();
pexitcode = p.ExitCode;
//name = "C:\\Users\\v-maparn\\Documents\\Visual Studio 2012\\Projects\\CodesignVerification\\CodesignVerification\\bin\\Release\\Microsoft.IT.Core.dll"
Thanks,
Mani

Hi Amy,
Thanks for your reply. I am receiving the exit code 1 by the Process even though the SignTool is able to successfully verify the assembly. I ran the below command from command prompt and received no errors or warnings. I assume the exit code should be 0.
I have also verified that this assembly has digital signature embedded as you can see from the output.
output:
C:\Windows\system32>signtool.exe verify /pa /v "C:\Users\v-maparn\Documents\Visu
al Studio 2012\Projects\CodesignVerification\CodesignVerification\bin\Release\Mi
crosoft.IT.Security.UI.SystemSecurityManagement.SSMUIWebHost.dll"
Verifying: C:\Users\v-maparn\Documents\Visual Studio 2012\Projects\CodesignVerif
ication\CodesignVerification\bin\Release\Microsoft.IT.Security.UI.SystemSecurity
Management.SSMUIWebHost.dll
Signature Index: 0 (Primary Signature)
Hash of file (sha1): 1B58113B218260837A6B850561538A804B034F2A
Signing Certificate Chain:
    Issued to: Microsoft Root Certificate Authority
    Issued by: Microsoft Root Certificate Authority
    Expires:   Sun May 09 15:28:13 2021
    SHA1 hash: CDD4EEAE6000AC7F40C3802C171E30148030C072
        Issued to: Microsoft Code Signing PCA
        Issued by: Microsoft Root Certificate Authority
        Expires:   Mon Aug 31 14:29:32 2020
        SHA1 hash: 3CAF9BA2DB5570CAF76942FF99101B993888E257
            Issued to: Microsoft Corporation
            Issued by: Microsoft Code Signing PCA
            Expires:   Thu Apr 24 14:33:39 2014
            SHA1 hash: 108E2BA23632620C427C570B6D9DB51AC31387FE
The signature is timestamped: Mon Dec 30 02:58:12 2013
Timestamp Verified by:
    Issued to: Microsoft Root Certificate Authority
    Issued by: Microsoft Root Certificate Authority
    Expires:   Sun May 09 15:28:13 2021
    SHA1 hash: CDD4EEAE6000AC7F40C3802C171E30148030C072
        Issued to: Microsoft Time-Stamp PCA
        Issued by: Microsoft Root Certificate Authority
        Expires:   Sat Apr 03 05:03:09 2021
        SHA1 hash: 375FCB825C3DC3752A02E34EB70993B4997191EF
            Issued to: Microsoft Time-Stamp Service
            Issued by: Microsoft Time-Stamp PCA
            Expires:   Wed Feb 11 14:11:31 2015
            SHA1 hash: D967AB4CF991F11DA6E318C880F1AF1A9C8D2C7C
Successfully verified: C:\Users\v-maparn\Documents\Visual Studio 2012\Projects\C
odesignVerification\CodesignVerification\bin\Release\Microsoft.IT.Security.UI.Sy
stemSecurityManagement.SSMUIWebHost.dll
Number of files successfully Verified: 1
Number of warnings: 0
Number of errors: 0
C:\Windows\system32>
Thanks,
Mani

Recovery will not run

i have a compaq cq58 with windows 8. i can get to the recovery manager through the start screen but when i try to run the windows recovery environment the screen will just go black with a movable cursor

Hi benzoa90,
I understand that when you tried to do a recovery it failed. You just got a black screen with cursor. Here are some documents to assist you with this endeavor.
Performing an HP System Recovery (Windows 8)
Troubleshooting HP System Recovery Problems (Windows 8)
During the recovery process you will receive an option to backup your personal files. If you have not done one yet, I suggest you do it now to prevent data loss.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
I hope this has helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

RunInstaller fails while running from command prompt

Hi,
The runInstaller when run fails from command prompt:
Starting Installation...
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /vol2/newtmp/OraInstall2009-05-17_11-02-45PM. Please wait ...Success!
Done!
[oracle@saudas oracle]$ Oracle Universal Installer, Version 10.2.0.1.0 Production
Copyright (C) 1999, 2005, Oracle. All rights reserved.
Unexpected Signal : 11 occurred at PC=0xF7D617CE
Function=(null)
Library=/vol2/newtmp/OraInstall2009-05-17_11-02-45PM/jre/1.4.2/lib/i386/client/libjvm.so
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
I have made a temporary directory logged as root user:
Then login as root:
$mkdir /vol2/newtmp
$chown oracle:oinstall /vol2/newtmp
$chmod 777 /vol2/newtmp
Then login as oracle:
$export TMP=/vol2/newtmp
$export TEMPDIR=/vol2/newtmp
Any help will be needful for me
Thanks and Regards

user598986 wrote:
I am using Oracle 10g Server Release 2 64 bitThat's a good start.
The OS is:Red Hat Linux 64 bit.Which version ?
Did you set DISPLAY env variable ? Did you set the kernel to the required value ?
Check again all the prerequisites.
Nicolas.

SWF files not running from some lab computers

Hello,
Our Flash lab is experiencing strangeness on 8 of its 28 computers. When students create an animation and export it as an SWF file, the animation will not run. They can play the animation from within Flash itself (Enter cmd... watch the timeline progress)... but it just won't run as an SWF file.
SWF files that are created on any of the non-problematic computers will run on the problem computers, but not the other way around (problem computer> good computer).
I'm not familiar enough with Flash to troubleshoot this problem. I know that the entire lab was created from one image and all the computers are the same model Dell, running Creative Suite 4 Premium on XP Pro. It is becoming an issue for students as the lab is full and they are having trouble completing their assignments.
Does anyone have an idea of what's going on... or where to start looking?
Thanks,
Alan

Thanks for the reply Ned. I've checked and the lab is still at the same version. I did find that if we recreated the student's profile and they started out on one of the "good" computers that any future work on a "bad" computer would work.
I also narrowed it down to a 3D animation... not just any animation that wouldn't work. It seems like the program isn't loading up everything when a student starts Flash for the first time on one of the "bad" computers. Students that first start on a "good" computer can run 3D SWF files successfully on a "bad" computer.
Well, at least recreating the student profiles is a bandaide fix for now. But I'd like to figure out what went wrong with those 8 computers (I did reload CS on a couple of them... didn't help).

Mdt 2012 sp1 command line does not run from task sequence

Hi,
I am hoping I can explain this correctly. I am using MDT 2012 and having an issue with running command lines, powershell and batch files that I setup.
The task sequence is set to use an account called "MDTService". it has rights to join the domain but is not in the local admin group of the reference image. a domain GPO renames the local admin account CoAdmin.
when running a command line to, for example, run xcopy a folder and subdirectories to the "program Files x86" directory, it does not copy.
When I log on to the system and use an admin account to manually run the command I do not have an issue. if I log onto the system with the MDTService user and run it, it fails.
How do I get the commands to run from the MDT task sequence? I do not want to make the MDTService user an admin. I have tried the run as option in the task sequence but that did not work. maybe is set it wrong. I used a domain\Admin
account which did not work.
what can I clarify or logs can I post to provide more details.
Thanks in advance.

Any account that needs to add files under %ProgramFilesx86% must be granted administrative privileges.
Keith Garner - keithga.wordpress.com

Recovery Manager not working correctly

I am checking my dad's laptop, a Compaq Presario F700 (F761US) and I cannot get the HP recovery working. I don't have the discs, so I select "System recovery" to its original factory condition, but it just restarts as if nothing.
Any help would be appreciated.

Is the recovery drive visible in My Computer? Try creating a disc from the HP Recovery Manager and use that.

The slide show runs in "live mode" but will not run from the browser.

Here is the link to the web page http://www.williamshomesteadranch.com/welldone.html
This is the first time that I've tried to use a widget and it looks good, but will not run fromthe browser.

The answer to the problem is very simple, the main images cannot be found. Please have a look at the following markup starting with line 305 or thereabouts:
      <ul id="ImageSlideShow" title="Jesse the Border Collie">
        <li><a href=Spry-UI-1.7/jackandjesse/jacksjesse251x270.jpg src="Spry-UI-1.7/jackandjesse/jacksjesse251x270.jpg" title="Jesse"><img src="Spry-UI-1.7/jackandjesse/jacksjessethumbnail.jpg" alt="photos-1.jpg" /></a></li>
        <li><a href=Spry-UI-1.7/jackandjesse/jackandjesseonbeach257x381.jpg src="Spry-UI-1.7/jackandjesse/jackandjesseonbeach257x381.jpg" title="Jesse and his Friend"><img src="Spry-UI-1.7/jackandjesse/jackandjesseonbeachthumbnail.jpg" alt="photos-2.jpg" /></a></li>
        <li><a href=Spry-UI-1.7/jackandjesse/jackjessesoccer251x378.jpg src="Spry-UI-1.7/jackandjesse/jackjessesoccer251x378.jpg" title="Jesse playing soccer with his friend"><img src="Spry-UI-1.7/jackandjesse/jackjessesoccerthumbnail.jpg" alt="photos-3.jpg" /></a></li>
        <li><a href=Spry-UI-1.7/jackandjesse/jackjesserestbeach365x246.jpg src="Spry-UI-1.7/jackandjesse/jackjesserestbeach365x246.jpg" title="Jesse and his Friend resting"><img src="Spry-UI-1.7/jackandjesse/jackjesserestbeachthumbnail.jpg" alt="photos-4.jpg" /></a></li>
        <li><a href=Spry-UI-1.7/jackandjesse/jackjessedwnbeach250x350.jpg src="Spry-UI-1.7/jackandjesse/jackjessedwnbeach250x350.jpg" title="A Walk down the Beach"><img src="Spry-UI-1.7/jackandjesse/jackjessedwnbeachthumbnail.jpg" alt="photos-5.jpg" /></a></li>
      </ul>
Now take a closer look at the first image.
The thumbnail is jacksjessethumbnail.jpg and, according to the markup, can be found at http://www.williamshomesteadranch.com/Spry-UI-1.7/jackandjesse/jacksjessethumbnail.jpg. Bless me, the thumnail is there. No problem here.
The main image is jacksjesse251x270.jpg and, according to the markup, can be found at http://www.williamshomesteadranch.com/Spry-UI-1.7/jackandjesse/jacksjesse251x270.jpg. Lo and behold, the image cannot be found. The problem must be here.
We can do the same analysis for each of the remaining images with the same result. This means that the main images have not been uploaded to the correct folder or that the path to the main image is incorrect.
Assuming that the path to the main image is correct, using DW, have a look in your local folder as follows
Then 1. single left click on the jackandjesse folder to highlight it, 2. click on the symchronise button, 3. make sure you have the correct selections in the Synchronize Files dialog and click on preview.
Then click on OK as per
and the files should be uploaded to the correct remote folder.
Gramps

Recovery Manager not running from BIOS prompt.

Similar Messages

Maybe you are looking for