Recovery Manger Error Code FFFFFF 19 For Hp Pavilion g6

Recentlly I did a Factory Restore on my Hp Pavilion g6 but once trying to restore the files via the restore applaction on the usb I got the eorror code Recovery Manger Failed. Error Code = FFFFFF 19. I would just like to know what this means and if theres any way to recover the files I have saved on the usb now?

Hi @Adriana94 ,
I moved your topic here where you'll get more response from the forum feedback section!
Best,
Russ
I worked for HP.

Similar Messages

Phone stuck in recovery mode error code 40 and would not restore

My Iphone 3GS stuck in recovery mode error code 40 and would not restore.I was with AT & T.Please help!

Hi there...
Actually I was stuck with this situation yesterday. Here is what I did to overcome this issue: I hope it helps.
To start with, here are few things to you should make sure of:
1- You have the latest version of iTunes. You may try to uninstall and reinstall iTunes.
2-Restart your Windows.
If still no luck, try editing the Hosts file, here is how;
1- click on RUN then copy and paste the following:
notepad c:\windows\system32\drivers\etc\hosts
2- look for gs.apple.com
3- if there are numbers infront of it just delete them or just type # before the numbers.
4- Save the file and try restoring again.
Note: you should have administror access to edit the Hostes file.
put your iphone in DFU mode before restoring.
I hope this helps. It did for me

I have upgraded my iphone 4 (ios 4.3.5 to current release 5.0.1) yesterday and got an error code 1630 for carrier up-gradation failure. Now my device is not working for phoning purpose. It just stay muted at the time of call.

I have upgraded my iphone 4 by iTunes from ios version 4.3.5 to 5.0.1
and think it was the biggest mistake I have ever done.
Now my iphone basically not a celluler/mobile phone. I can't hear a single tone at the time of calling
and even the the receiver also can't here my voice. calling other and after receiving by them and to be
mute is the thing happned to me with that upgradation. before that it was working absolutely fine. I have
checked my microphone and headset by recording and it seems absolutely OK. I don't know what should
I do now?
Please help me.
I tried to downgrade my phone to 4.3.5 back but at don't accept downgradation and gives me an error code 3194

Thanks for reply,
It's truely a disestar for me to kill my phone myself by so called bloody upgradation.
Iwish I have not upgraded.
I baught it from here in Bangladesh and now I’m ina mess to get at least a minimum support.
Thanks for your valued suggessions but it didn’tmade any difference to my situation.
So now I have an ipod in the price of an iPhone4. Crap.
Is there any chance of fixing this bug by apple?As the same problem has already been faced by a lot of iPhone Users.

Adobe CSXS InfrastructureCS6 Installation failed. Error Code: U44M1P7 for CS6 during exchange update

Adobe CSXS InfrastructureCS6 Installation failed. Error Code: U44M1P7 for CS6 during exchange update on Windows 7.
Please advise... It appears that some programs available in CS6 did update, just not PS, AI or some of the other programs needed for my current classes.
Thank you,
tjr

Try following the steps outlined in this blog post:
http://acrobatninja.com/2013/07/fixing-csxs-infrastructure-update.html

Error code 499 for download music

error code 499 for itune music download all other music is ok.thanks

Hello, holebung.
Thank you for visiting Apple Support Communities.
Here are the troubleshooting steps that I would recommend going through when receiving error 499.
"Error 499"
This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
iTunes: Advanced iTunes Store troubleshooting
https://support.apple.com/kb/TS3297
Cheers,
Jason H.

Is there a range of error codes reserved for user defined error codes?

I would like to create my own error codes for a CVI dll but I want to make sure I don't use error codes already defined for something else. Is there a range reserved for such use?
Samee thing for warnings (errorcode > 0)
Thanks

I have never found a positive mention of a "safe" range of error codes available for user-defined error conditions, but I can suggest you some source of informations.
First of all, every library has its specific list of error codes, usually listed in the relative include file. All these error codes are listed in the online help too (search for "error codes" in the index tab of the help).
Second, GetGeneralErrorString () is a function that can be used to trap errors of the following libraries with a unique error function:
User Interface Library
Easy I/O instrument driver
Toolbox instrument driver
ActiveX Library
DIAdem Connectivity Library
.NET Library
DataSocket instrument driver
Network Variable Library
Real-Time Utility Library
TDM Streaming Library
UDP Support Library
This means that the error codes from this libraries do not overlap, so you could derive from its code some ranges not used by these libraries.
Nevertheless, there is not a single function for error trapping: every library has its proper list of error codes and a function to decode them in human readable form, andthere is no guarantee that these ranges does not overlap. It's up to you to trap errors from every function in the proper way.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Import Error (Partial Set failure with RC error code = 0x84020020 for rec

Hi,
While importing the data through xls file , i am getting the error message "Partial Set failure with RC error code = <0x84020020> for record number
0 through 212" and no record get created in Data manager.
Although i mapped all values , still it giving me an error message.
I tried to Import other data and it was all working fine.
Please guide
Regards
Sandeep Kumar

HI,
I checked the exl file and found that in the first column and first data was in text format ('0001)but later on when i change the record and moved it to the last record , it worked fine. I was able to load all records including ('0001)
I don't know wht the logic behind this:
if my first record was ('0001), system was giving me the error and not allowing me to load the data. But when i moved the record as the last record it not only allow me to load the records but allow ('0001) also.
If anyone have any clue , plz let me know.
Regards
Sandeep

RECOVERY LOOP: (Error Code:0xc0000185) PC doesn't load my operating system windows 8.

Hello,
About 3 weeks ago my just over a year new laptop took a fall onto the carpet from 4 feet above... my screen was cracked so I ordered a new one and put it in yesterday. Now, I am having problems. I start up my laptop, the HP logo with a timer circle is spinning below it, then it says " your Pc ran into a problem and needs to restart", it restarts and then it says, " Recovery- Your PC couldn't start properly. A required device isn't connected or can't be accessed. Error Code: 0xc0000185." With a bunch of other stuff written below it.. I have tried all the prompts possible. I did do a HP PC HARDWARE DIAGNOSTIC UEFI test, both the short and extended one. It says FAILED - Failure ID: GLXS3H-6MF76S-MFPWWJ-60S603, with the Product ID: C5E40UA#ABA then right below HARD DRIVE 1.
My lap top will not go into the windows screen now at all. I am guessing the fall my lap top took did some damage to the hard drive and that is the internal problem now. I did look at a video on how to take the hard drive out and I did unplug, remove battery, and take it out and took the controller board off, check to make sure nothing was lose or broken, and put back together and reinserted it into my laptop and I am still having the same loop as above happening.
INFO about my laptop:
-HP Pavilion G7-2247us Notebook 17.3"
-Windows 8
-750 GB Hard Drive
If you need any other information let me know and I will send it your way. I appreciate any help you give in advance.
Thank you,
Rachel H.
Washington State

Hello rh2014,
I have read your post on how you are not able to boot into Windows after replacing your notebook's display screen, and I would be happy to guide you towards a resolution!
Based on the information you have provided in your post, I recommend contacting our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Recovery disc error code: 0xe0ef000e

Back in December I started getting warning messages about my SMART Drive failing and was told to create recovery disks for my Pavilion dv-7 Notebook, which I did. A few weeks ago the hard drive crashed and I replaced it. When I went to recovery page my disks did not work and I received the following error code: 0xe0ef000e. I looked on HP support website and saw where I could order new recovery disks which I attempted to do and they are not available. So I have a 2 year old $1000 laptop for which I just bought a new $100 hard drive and it's unuseable. Any suggestions on what to do next?

Hi,
There are a couple of options.
1. You could try the reliable 3rd party reseller Here.
2. Here's an alternative ( and cost free ) option you could try.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows 7 Images.
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers and software you may need can be found by entering either your Model No. or Product No. Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Windows 8 Recovery failed; Error code: 0xc000000f

Hi,
I am having some trouble with my HP Envy m6 laptop.
I was using Windows 8 pro for almost a year without having any problem. After installing Win8.1 Pro, I had trouble booting and called in HP support and conducted a System Recovery. Everything was good but system was slower.
So, I backed up all data and then proceeded to do a Factory Reset (with HP Recovery Manager) with my HP Recovery DVDs which I have burned earlier. Everything seems to be working fine however the restoration failed (Incomplete restoration)! Tried couple of times but same problem.
While conducting some self-tests, 'Memory Test' (under Run-In Test) failed with "FAILURE ID: RGCD5F-6G56SV-XV7X0K-406803".
At the end, got following error:
"Recovery
Your PC needs to be repaired
A required device isn't connected or can't be accessed.
Error code: 0xc000000f
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacture."
I tried to reach HP Support since still have warrenty but unfortunately I just wasted my time talking to them. I purchased my laptop from Canada but currently living in Australia which made it really difficult to communicate with them.
Can anyone please give me some idea what I needed to do to resolve this issue? I went through several articles in here but failed to get the correct ones. Most of them are for Windows 7 and there are many differences in Windows 8!
I am urgently requesting some assistance from a HP expert who has experience dealing similar issues.
Thank you.
Best Regards,
Suranjit

The failure ID that you have provided for the memory test means that the Checksum has failed. This means that it is not finding a part that should be available, but is not showing. After taking a look into the issue of the memory test failing, the most likely cause of the failure is one memory modules has failed. I have included a link to another HP Forum thread here. Please follow the steps that DavidPK has outlined.
For the recovery error message that you are getting, this means that an integral component used during startup can not be found. This error should resolve itself once the memory Checksum error is resolved.
If your notebook has two memory modules, you should be able to boot from the one memory module until the other one is replaced.
Please let me know the outcome of the troubleshooting, thank you.
I worked on behalf of HP

Mass storage device and portable device ERROR code 31 41 HP PAVILION s5123w Desktop PC

I am using windows vista home premium 32 bit First time I pluged nikon camera into computer. Says installing device driver software but it does not install. Device manger under portable device digital still camera yellow question mark error code 31 under mass storage device error code 41. The device driver loads and installs on my daughters Laptop so ther is some thing wrong with my PC Every time I reboot computer windows need to intall driver software for your Microsoft WPD file system volume driver. Loacate and install driver software recomended says installing driver says successfully installed. I have to click Safely remove hardware usb mass stoage device multi flash reader usb device generic volume f I click stop says safe to remove I do not have a reader plugged in my computer. this happens every time I reboot> If you don't understand what I am talking about Let me know.
thanks Scott

Hey poochokid,
I'm sorry you're running into this issue. For the camera, if it's newer (made in the last 3 or 4 years) you may need to go to the Nikon website and find the camera software that is made for Vista. I could try to help you find that, if you could give me the model of camera you have.
For the Microsoft WPD file system volume driver issue take a look at this thread from another forum.
I hope this information helps! Let me know what the results are

Error code 16 for windows7

i bought the cs6 web design premium student edtion. It worked fine on my vista set up. then i up graded to windows 7 and again all was well then about two months ago i started getting the error code 16. So i uninstalled it and reinstalled it with no luck. Did the walk through online about changing the SLStore and PCD folder options. Still no luck, i called tech support and he told me to look here so here i am.
intel core i7-3820 @3.60ghz
16 gb ram
64-bit OS windows 7 home premium service pack1
Geforce 580 video card
Creative suite is CS6 student edtion of the design and web premuim

Hi There,
Thanks for the information.
Kindly try the following steps.
1. Enable root user: Enabling and using the "root" user in Mac OS X - Apple Support
2. Try to launch it.
If you are able to launch it successfully in root.
3.Give read and write permission to everyone, and your username to below mentioned folders.
/Library/Application support/Adobe
~/Library/Application support/Adobe.
Utility/ Adobe Application Manger.
Utility/ Adobe Creative Cloud.
If it still persists, try to create another Admin user account and try to launch.
Please share the results.
Thanks,
Atul Saini

Unable to make recovery disk-Error code:020123-f10000000

Hi guys
please help if can?, i purchased the recovery disc for my tosibia qosmio dx730 -10p loaded new windows on all perfect and tried to make a copy of the back up media so i have extra copy incase other gets damaged its saying same thing when purchased this pc from new ,on first blank dvd r disc it gets half way and saids ,
Failed to open file
E;\boot\BCD
ERROR CODE 020123-F10000000
E drive is my dvd rw drive
i have intalled the new discs they sent me and still cant make a media back up .
Deborah
Solved!
Go to Solution.

Hi ! Iuse memorex DVD-R. What I would do is buy a usb and create your recovery on it. That is if your machine will boot to a USB. I have a 16GB USB with my recovery on it. It would be a lot easier to use it than all those discs You can check boot sequence to see if your machine will boot from USB
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Installing photoshop cs4 on an iMac and getting the error code licensing for this product has stopped working. what do i do?

have cs4 on a disk and installing on a new computer with no disk drive. dragged application file onto a stick and transferred to the new computer. but am getting this error code when i try to open. any ideas? thanks for the help

Hello,
what do you think about download a PS trial version, install it and then use your SerialNumber to active it.
You could use http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html AND note the: "Very Important Instructions" mentioned there.
Hans-Günter

Installation of Updates for Photoshop CS6 failed. Error code U44M1U5 for Camera Raw and U44M1P210 for Adobe Application Manager

The Installtion of updates for Photoshop CS6 failed. Error code for Update of Adobe Application Manager is U44M1P210, for all other features (Adobe Bridge, Photoshop CS6, Camera Raw) U44 M1U5

You go Photoshop CS6 > Help > Updates ...

Recovery Manger Error Code FFFFFF 19 For Hp Pavilion g6

Similar Messages

Maybe you are looking for