Recovery Media Creator- Crashes when creating disc 2

I tried to use media creator but it always crashed on disc 2 with dual layer or single layer. I have tried multiple times with the follow error below. Any ideas what may be going wrong? I have a x505 q830 Qosimo
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 7f
BCP1: 0000000000000008
BCP2: 0000000080050031
BCP3: 00000000000006F8
BCP4: FFFFF8800869638C
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Sounds like a corrupt image file on the hard drive. I would contact Toshiba Technical Support by phone about the problem and see what they have to say about it. They'll probably end up sending you a free set of Recovery Disks.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Similar Messages

Premiere Pro CC updated - crashes almost immediately on my mac OS X Yosemite 10.10.3. Crashes at startup, crashes with media import, crashes when creating a sequence. NEED HELP FAST I have tried many troubleshooting solutions I found online nothing has

Premiere Pro CC updated - crashes almost immediately on my mac OS X Yosemite 10.10.3. Crashes at startup, crashes with media import, crashes when creating a sequence. NEED HELP FAST> I have tried many troubleshooting solutions I found online nothing has worked.

Hi,
Sorry to hear about the experience. Please provide your computer configuration details.
Memory, Processor, Graphics card, Exact version of Premiere Pro, Error message that you are get. If you can post screenshots of the error report that would be helpful.
Thanks,
Rameez

Crashes when creating disc image

Hello.
I've tried several times now to burn a disc image instead of burning to DVD because I want to make more copies in the future AND because I'd like an archive.
The issue I'm running into is that all three times I've tried this, iDVD crashes at some point during the process. But it crashed at a different point each time.
Any idea what could be causing this?
Thanks,
ALF

Preparing your Final Cut Express or Final Cut Pro movie to work with iDVD
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/22.html
Preparing QuickTime movies to work with iDVD
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/397.html
Sue

Cannot burn recovery dvd disc in toshiba recovery media creator and windows 8

I just purchased a satellite Pro L875 with blu ray writer.
When I use the recovery media creator, error message come up, asked me to check if the media was broken or scatched.
The dvd had some data written on it and it was not blank after the error message.
I tried to burn dvd disc in windows 8 alone. it did not start burning. I only added the file to be burnt on the optical drive.
I played dvd and blu ray on the drive. it had no problem.
How to get it burn recovery disc and normal data disc?
I found information about try to use the appropiate dvd disc with the speed that matches the burner speed.
How to know what blu ray rw, dvd rw speed my blue ray writer support?
it would be great if anyone answer my questions and will get the drive to burn some disc..
Solved!
Go to Solution.

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
- Peter

Satellite A660-13Q - Error when opening recovery media creator

My problem is that: When I try to open the TOSHIBA Recovery Media Creator application gives me the next error: "CAN NOT get information from the disk controller" with the options Accept or Cancel, when Accept then gives the next error --> "there has been an unexpected error. out of this application and restart it. Error code: 0d00f6-49-00000001" then accept next error "there has been an unexpected error. out of this application and restart it. Error code: 0D0172-49-00000001" Then accept, the application open correctly.
Please, I need a solucion of the errors, Thanks.

Hey,
I dont know what to say but fact is you cant start Toshiba recovery disk creator there is not much what you can do because you cant download this program on official Toshiba website.
In your case I would try to recover your notebook to factory settings using HDD recovery option:
http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm
After this create the recovery disk again before you install any new software or something else.
I could also imagine that you installed another program that blocks recovery disk creator but its hard to say about this so try HDD recovery and see what happens.

Portg Z30-A-182 - Recovery Media Creator Error

Hi,
I have a brand new Portg Z30-A-182, have installed my office and virusscan and now want to create a set of Recovery DVD's using Recovery Media Creator.
I use a Samsun external DVD-writer and DVD+RW disc's.
I keep getting the error 0E01BA-49-00000000 when the software wants to start writing to the DVD.
I searched the internet and this seems an error which occurs frequently and does not get solved using other type of discs.
How do I solve this error ?
I saw that I can BUY a set of recovery discs with Toshiba online, but that can not be the purpose with a brand new pc ???

Can you plese test functionality when you try to create recovery USB stick?
I have machine without ODD too and I have created recovery USB. It is for me more komfortable than using DVDs.
By the way: in the past i have created recovery DVDs using DVD-R medias only.
Check also this thread.

Toshiba Recovery Media Creator Error Code 020150-20-00000000 (Satallite L755-S5308)

We just received 2 - Toshiba Satallite L755-S5308 Laptops over the thanksgiving holiday from Best Buy and the first thing we normally do after powering up the laptops is to create our recovery disc sets to DVD's. However, both laptops are giving the same error message on both machines at the same point in the creation of the Recovery DVD Disc 4 when using the Toshiba Recovery Media Creator. Please See Eror Message Below:
Failed To Read The Following File.
D:\ZZImages\ZZImages\Preinst18.swm
(Error Code: 020150-20-00000000)
If you are getting this error message then you will not be able to restore your laptop factory software and operating system (Windows 7 Home Premium 64-bit)

You could create an image of the entire HDD onto another drive, but this can be a headache for a lot of users and would require specialized hardware and a HDD enclosure. As such, it's not a feasible solution.
Oh,come now. You can buy 'specialized hardware' -- an HDD enclosure -- from a widely known online computer store for $12.99 with free shipping, and a spare plain old Seagate 500 GB hard drive (nothing very special about it, except that it costs more since the flooding in Thailand) running at 7200 rpm from a different widely known online computer store for $99.99 (shipping extra). Seagate gives away its branded version of Acronis True image for free. It is not that hard to use. I believe the L755 has a 500 GB 5400 rpm hard disc drive, so this Seagate may make the laptop run faster under some conditions. Creating an image of the laptop HDD onto this 2nd HDD mounted in the enclosure may take hours, but consider the only other alternative, below:
Anyone who thinks that solution is not feasible can just wait until their one and only hard disc drive fails or develops a software problem. Without usable recovery discs, the machine must be dropped off or mailed to a service center. Compare the waiting and the expense to have someone else solve that kind of problem with the effort and expense of preventing it. If you don't mind being without your computer for a few days or weeks, go for the simple way.
By the way, even the best home-burned optical discs are prone to develop unexpected failures after they are created. I've never had a factory pressed optical disc properly stored develop a late failure. If these work out of the box, they work a couple of years later. The technologies behind a home-burned disc and a factory-pressed disc are different.
Getting back to my original point, should your 1st HDD fail, and should you have a 2nd HDD with the cloned image of the 1st HDD, your recovery takes as long as it takes to remove HDD #1, installed HDD #2, and reboot your laptop, involving about 5 minutes of your time and perhaps a small screwdriver. You can test whether or not your cloned backup works the same way, by installing HDD #2 and seeing if it works. If you only have a single HDD, there is no good way to test your recovery media, since they overwrite your original HDD.

Recovery Media Creator Installation error

I have a P745-S4320 that somehow does not have the Recovery Media Creator Installed. I have downloaded it from the Toshiba website and when I try to run the installation, it pops an error message saying:
Feature: StartMenuShortcuts
Cmoponent: StartMenuShortcuts
Error: The file or directory is corrupted and unreadable
Then it stops the installation and erases all the information and files & folders created during the installation.
Can somebosy please help me on this?
I need to create the Recovery Discs because the DVD-R DLones I created when I first bought the laptop can't be usable for an error on the files 12 & 18 on Disc 2.
Please somebody help
Attachments:
trash.JPG ‏39 KB

Satellite P745-S4320
Downloads here
I have downloaded it from the Toshiba website..
I don't see it among the downloads at the link above. So I doubt you've got the right program.
See if you can locate the following file in either the Program Files or the Program Files (X86) folder. It should be the program you're looking for.
TRMCLcher.exe
Let us know what you learn.
Otherwise, you can order recovery media from Toshiba. Scroll down to Get Recovery Media here.
-Jerry

Satellite C50-A-19T problem with TOSHIBA Recovery Media Creator

When i try to make Recovery dvd with TOSHIBA Recovery Media Creator the burning fails.
I have Satellite C50-A-19T with TSSTcorpCDDVDW_SU-208DB_T cd/dvd-rw unit.
During burning process i get an error that say that is impossible read the file D:\ZZImages\ZZImages\install29.swm (the .swm file in error change with different attempts).
I marked the option to verify dvd after burning.
I tried a few times: i try make a single dvd (requires 3 dvd for complete recovery).
i try 2 times with verbatim dvd+r the fist try failed, the second succeeded with the same kind of support.
i try make dvd numb. 2. for two time with dvd-r and dvd +r support and it failed again.
On windows error report i find this error:
and this alert:
+ODD Firmware Update to fix problems with the Toshiba Recovery CD creator+
I see this solution by upgrading firmware for different models of cd/dvd-rw units
http://aps2.toshiba-tro.de/kb0/TSB9C02RP0000R01.htm
but not about the model I have.
i have:
TOSHIBA Recovery Media Creator version: 3.1.02.55065006
windows 8.1 x64.
there is a solution?
is a known problem?
thanks
Elena

> I don't have a free usb drive to test the usb mode.
I would recommend you to purchase an separate USB memory stick and to create the such recovery USB flash memory media.
Please check also this different procedure described in this Toshiba HowTO
[How to create a USB recovery media flash drive from recovery ISO images- or discs (DVDs)|http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm]
Feedback is greatly appreaciated

Question about Recovery Media Creator

Hello everyone, first of all, I don't know if this question should be in this catergory, but I thought this would be the best to post in.
My question is about the Recovery Media Creator procces. I was about to create the recovery DVD and I noticed there are several Recovery Media options (Recovery Media 1 to Recovery Media 3).
My question is, what are the differences between them? Does it matter if I only check one of them so I would need less DVD's or a smaller USB?
Thanks in advance.
PS. excuse my grammar or bad explanation if there is any mistake.

Using Toshiba recovery media creator recovery image saved on HDD will be copied on DVDs or USB media and it will be created as bootable media.
How many discs must be used depends on recovery image. For some notebooks 2 discs are needed and for some of them you need 3 discs.
The tool gives you also info which medias you can use and suggest you, for instance which USB device you need. For my U940 is 16 GB USB listed as suggested due to 9,2 GB recovery image.

Recovery media creator: "Can not get Disk driver information. No HDD Recovery area!...

The Toshiba Recovery Media Creator can not be launched."
That´s the final part of the message I receive when I try to make the system image.
As you can see (image below), this recovery partition exists, I haven´t deleted nor modified it in any way, and besides it´s in good state. I don´t understand why I get this error message. What can I do to get this recovery partition recognized by the application. I really need to make a system image.
Please, if somebody has any idea of how to fix this thing, I´d really appreciate your help.
Thanks in advanced.
Will
Solved!
Go to Solution.

Will, I'm afraid you'll need to order recovery discs and restore the hard disk to its original out-of-the-box contents using them.
Order Toshiba Recovery Media
BTW, the 1.46 GB partition you're looking at is not the recovery partition. It contains the Windows Recovery Environment.
-Jerry

SSMS crash when creating new database diagram

For several years I have been unable to create database diagrams from within SSMS. I have tried every combination of VS2005, VS2008, VS2012 and VS2013 with every combination of SQL2005, SQL2008, SQL2012 and SQL2014.
I have installed, uninstalled, and repaired many dozens of times. I am currently using VS2013 ultimate with SQL2014 express.
I have tried every related 'workaround' that I can find on the internet. Still the problem persists.
Any help would be deeply appreciated.
Here are the relevant details with file versions:
In SSMS, I right-click on a database and choose New Database Diagram. A Blank diagram window appears with the SSMS error dialog:
===================================
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft.VisualStudio.OLE.Interop)
Program Location:
   at Microsoft.VisualStudio.OLE.Interop.IOleCommandTarget.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
   at Microsoft.VisualStudio.Platform.WindowManagement.DocumentObjectSite.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
   at Microsoft.Internal.VisualStudio.Shell.Interop.IVsTrackSelectionExPrivate.Register()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ConnectSelectionContext()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.Activate()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowManagerService.viewManager_ActiveViewChanged(Object sender, ActiveViewChangedEventArgs e)
   at System.EventHandler`1.Invoke(Object sender, TEventArgs e)
   at Microsoft.VisualStudio.PlatformUI.ExtensionMethods.RaiseEvent[TEventArgs](EventHandler`1 eventHandler, Object source, TEventArgs args)
   at Microsoft.VisualStudio.PlatformUI.Shell.ViewManager.SetActiveView(View view, ActivationType type)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ShowInternal(ShowFlags showFlags)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.<Show>b__26()
   at Microsoft.VisualStudio.ErrorHandler.CallWithCOMConvention(Func`1 method)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.Show()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.MarshalingWindowFrame.<Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame.Show>b__7a()
   at Microsoft.VisualStudio.Shell.ThreadHelper.Invoke[TResult](Func`1 method)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.MarshalingWindowFrame.Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame.Show()
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection con, String fileName)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VirtualProject.Microsoft.SqlServer.Management.UI.VSIntegration.Editors.ISqlVirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection
con, String fileName)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.ISqlVirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection con, String fileName)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.CreateDesignerWindow(IManagedConnection mc, DocumentOptions options)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.InvokeDesigner(IManagedConnection connection)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.Invoke()
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ToolsMenuItemBase.MenuInvokedHandler(Object sender, EventArgs args)
Version info taken from Sql Server Management Studio/Help/About dialog:
Microsoft SQL Server Management Studio      12.0.2000.8
Microsoft Analysis Services Client Tools    12.0.2000.8
Microsoft Data Access Components (MDAC)     6.1.7601.17514
Microsoft MSXML                             3.0 4.0 5.0 6.0
Microsoft Internet Explorer                 9.11.9600.17358
Microsoft .NET Framework                    4.0.30319.18444
Operating System                            6.1.7601
DLL versions
c:\Program Files(x86)\Common Files\microsoft shared\Visual Database Tools
dsref80.dll version 12.0.21005.1
c:\Program Files(x86)\Common Files\microsoft shared\MSDesigners8
msdds.dll    12.0.21005.1
msddsf.dll   12.0.21005.1
msddslm.dll 12.0.21005.1
msdds.mp.dll 12.0.21005.1
msddsp.dll   12.0.21005.1
c:\Program Files(x86)\Common Files\microsoft shared\MSDesigners8\Resources\1033
msddsui.dll 12.0.21005.1

Hello,
There is a Connect item related to this issue. This is the link of that Connect item:
https://connect.microsoft.com/SQLServer/feedback/details/730985/smss-crashes-when-creating-new-database-diagram
Try the workarounds posted there (Workarounds section).
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Media Encoder crashes when exporting from Premiere Pro

Media Encoder crashes when exporting from Premiere Pro. I am queueing multiple files for export and Media Encoder will crash. The computer system has 32GB of RAM and the videos export fine in Premiere, but that requires exporting each one individually. Each video file is being down converted and some can be quite long (upwards of 3-5 hours). Nothing else is running on the computer that would take up memory.
Any idea why Media Encoder will crash?

Try turning off GPU acceleration.

Adobe Media Encoder crashes when I open a file

Adobe Media Encoder crashes when I browse to open a file.
I have a Creative Cloud subscription.
I have uninstalled and reinstalled the program through the Creative Cloud service. No change.

Thanks for responding.
Yes, I am trying to utilize Photoshop CS (8.0) and I run Windows 7.1. I installed this from Adobe's Creative Cloud. The program opens, and I am able to open a Photoshop file with it, but then Windows tells me that there is a problem and is shutting down. I'm not sure would the problem might be.

InDesign CC 2014 crashes when creating alternative layouts

InDesign CC 2014 crashes when creating alternative layouts. I successfully created alternative layouts in 3 documents, now I cannot create any at all, it just crashes the program.

I just taught a class using Alternative Layouts in InDesign CC 2014 without crashing.
Start by telling us what kind of computer and operating system you're running. Are you having any other problems in InDesign CC 2014? Have you try restoring your preferences?
Trash, Replace, Reset, or Restore the application Preferences

Recovery Media Creator- Crashes when creating disc 2

Similar Messages

Maybe you are looking for