Recovery mode and firmware-creative zen mic
I am stuck in recovery mode and cannot get out help!!!!!!!!! it says also there a firmware problemMessage Edited by jchandler on 0-2-2006 0:44 AM
Try reloading the firmware, you can obtain upgrade firmware from the website here
This is the PlaysForSure firmware version 2.2.02
This is the Origional firmware version ..0
Message Edited by 2027746 on 0-2-2006 02:24 AM
Similar Messages
-
ZEN TOUCH 20GB - Stuck in Recovery Mode, during Firmware upgrade. HEL
Ooooh dear.
Me and my Zen Touch are completely stuck. Decided to upgrade the Zen's Software and Firmware and am now in deep trouble. Here are the steps I took.
First I sensibly backed up the 2000 songs on the player to my computer. Then I updated the MediaSource software and restarted the computer. Then I decided to go for the big change and downloaded the new PlayForSure firmware installation and that's where the problem starts - It never completed the installation, which I had to manually stop. I knew as part of puting this new Firmware onto the player, the Zen would be wiped clean, which it has. However, I now cannot get it out of recovery mode and it will not respond to attempts to download the new (or any) Firmware onto it.
What I now get is:
-Plug the Zen in, the computer recognises that there is plug and play equipment attached and makes the appropriate noise.
-The Zen will switch itself on as a response (or I can do it manually), with a normal-looking startup. It then briefly flashes a screen saying "Firmware Problem" before going into recovery mode.
-If I choose Clean Up, it takes a few seconds to clean the now empty disk, and returns to the recovery menu
-If I choose Format All, pretty much the same as Clean Up
-If I choose Reload Firmware, it warns me that the firmware will be erased. And asks if it should reload it via USB. You say 'yes' and it briefly flashes up "Start firmware update now" before returning to the recovery mode menu.
And finally, if I select Reboot, that's exactly what it does; the computer recognises that it's turned off, makes the noise, and recognises when it's turned on again.
Trying to download the Firmware from the computer, however, has turned into a nightmare. I've tried downloading the PlayForSure firmware and old Firmware from the files on my computer (running XP, by the way). And I've also tried prompting the Zen starting up the Media Source software, BUT they all claim that the player is NOT connected! Even though it is! The Zen switches on and Windows makes a sound every time I connect or disconnect it!
So what to do? I'm stuck in this vicious circle and no matter what random tricks I try, I can't get out. The player needs Firmware, but the software on the computer claims the player's not connected.
The player is now more than a year old, so I can't return it, and Creative's less-than-generous telephone support is not an option, so I'm left to any imaginati've and kind-hearted subscribers to this list to offer suggestions.
HELP!
Mark in the UKMy son?s Zen simply turned on one morning and refused to do anything except enter recovery mode, giving a firmware problem error and Creative Zen v0.0.58After an hours research I solved the problemI hope this helps someone out, but remember anything you do is your responsibility not mine, continue at your own judgment
Creative site SingaporeDownload driver and firmwarehttp://sg.creative.com/support/downl...ype=0&x=30&y=6
download driverCreative Zen and Jukebox Driver Upgrade version .30.03
firmwareCreative Zen Firmware .00.02
Install driver, connect Zen, should show up in my computerAnd yes, when you open the Zen from there it WILL say not correctly connectedBecause the firmware is corrupted! But it is connected Go to the firmware file and double click, the firmware software will connect to the ZenAnd overwrite the firmware. Follow the on screen instructionsYou may get a warning that the firmware is the same version etc. just do it, as at the moment the Zen is useless. Good luck and if it works repay me by helping someone -
was making the update for my iphone 4s . then he stops. My phone in this time is in the recovery mode and do not take the firmware to open my phone, please can u help me to recover my phone. My current ios 6.0.1. plese send me some thing that is useful
Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474. -
Help! my Zen MIcro has gone into recovery mode and wont get out of
My Micro suddenly just went into Recovery mode and i have tried all the options and have had no sucess with any of them has anyone else had this problem if so did you get out of it !! i need help cause the bus ride home is no fun with out it
Ohareehoh,
If the Zen Micro is clicking at the point you are describing, then it sounds like the Hard Dri've has been damaged and you are physically hearing the clicking of the dri've. I would suggest contacting support for repair options.
Daniel -
My Zen MicroPhoto goes straight to Recovery Mode and I dont know what to
Hey, I need help figuring out why does my Zen MicroPhoto goes into recovery mode now by itself. I had difficulties with the same issue with a Zen Micro. My Zen MicroPhoto had issues in the past where it would spontaniously restart and rebuild the library. I would one second listen to music on the bus and sit down slowly, then the music cuts and the zen microphoto resets itself. Can I get some help here?! I really dont want to resort to sending it out for repairs unless its a last resort.
lauren842012 wrote:
help my iphone 3g is stuck on recovery mode and i dont know what to do as its my first iphone and i got it second hand i stupidly tried to reset it on my laptop and i think i have buggered it up but i also got it unlocked a few days ago and i am worried i wont be able to use my 3sim in it anymore need help and ideas
thanks ......
Press and hold the Home and Power buttons on your iPhone until it shuts off.
Connect it connect it to your computer with th USB cable.
Press and hold down the Home button.
Hold it it down until iTunes says your device is entering recovery mode.
Now you should be able to Restore using iTunes. -
my iphone 1st gen is stuck in recovery mode and every time i try to reinstall firmware i get an error code 1015 can anyone help please?
Make sure you are using current iTunes on your computer. Click the iTunes Tab at the top of this page. Or try to Restore your iPhone with a different computer.
-
i tried updating my iphone 4s to the ios 7 but it said error with the firmware now my phone is stuck in recovery mode and i have no idea how to fix it any suggestions??
Try Restoring it 3 times in a row and see if that works.
If not that error can indicate one of two things: Your iPhone was at one time jailbroken, had the iOS version rolled back, or ran an unauthorized beta and if none of those things are true it is a hardware error. -
Please Help! Stuck in Recovery Mode and My Player is N
If anyone can help...you would be saving me!!! I received the Zen Micro as a present last week. I have Windows Millennium. I downloaded all of the software successfully. My device is recognized by my USB, however, the Creative Zen Micro Media Explorer keeps stating that my device is not plugged in. So, I went and used the FAQ section's directions and went into Recovery Mode. Now, since I have not used this MP3 player at all yet, I am stuck in recovery mode. I downloaded all of the recent drivers, jukebox, and firmware to my PC, however, when I try to transfer the files to my Zen Micro, it states that the device is not plugged in. Now I am panicking because it is stuck in Recovery Mode, and I want to transfer my firmware, drivers, etc. Can anyone please help me?? Thank you!!!!!!!!!!!
See this support document for instructions on how to handle that situation. http://support.apple.com/kb/HT1808
-
my ipod 4 is stuck in recovery mode and i dont really want to restore it because i havent really backed it up. what should i do in this situation?
If one of these programs will not kick the iPod out of recovery mode then you will have to restore and thus erase the iPod
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
In the future, frequently backup your device. -
IPod touch 3rd gen stuck in recovery mode and iTunes cannot fix it
i have an ipod touch 3rd generation with firmware 4.3.4. i was recently playing an app whe all of the sudden my ipod just shuts off. i held the power button but it would not turn on. then i tried just holding and pressing and holding the power and home button on my ipod touch trying to get it to turn back on. eventually the apple logo appeared and i felt relieved. however the usb and itunes screen popped up so i plugged my ipod touch into my computer and tried to restore it. when i plugge my ipod touch in a message popped up telling me that my ipod touch was in recovery mode and had to be restored. so i clicked on restore and waited for my ipod to restore. then another message popped up. it said that my ipod was not approved from apple to be restored. i had no idea what was going on so i did some research. i found that other people have seen an error pop up but with an error number. my error displayed no error number. i thought to myself that that was strange so i tried to restore my ipod agian. then i realized when i clicked on my ipod in itunes that my ipod summery was wierd. the name of my ipod was ipod and the capacity and serial number etc. said n/a. what is wrong with my ipod and how do i fix it? i miss my ipod.
ok hit the level down sound home and power button at the same time happen to me to really anoying
-
Alright, here are the details: my iPod Touch 5th gen. is stuck in recovery mode, and it won't connect to iTunes so I can restore it. Now, I know I have the latest version of iTunes, I have deleted it & reinstalled it, and even restarted my computer, but it still won't come up in iTunes...What should I do??
Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode use one of these program
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Help, my iphone is in recovery mode, and itunes shows error code 1
help me, please. my iphone 4 is stuck in recovery mode, and when trying to restore, itunes shows " error code 1, an unknown error occurred"
please help!!!me to ;/
[23:05:36.0982] [nand_part_core:INF@2289] first 2 pages of boot blocks written with copies of partition table
[23:05:36.0982] [nand_part_core:INF@3169] next 98 pages of boot blocks written with LLB image of size 150080 bytes
[23:05:36.0982] [nand_part_core:INF@3172] final 156 pages of boot blocks written with random data in full page format
[23:05:36.0982] entering update_gas_gauge
[23:05:36.0982] entering update_ir_mcu
[23:05:36.0982] looking for mcu nub...no entry from path!
[23:05:36.0982] TiSerialFlasher not supported on this platform. Exiting.
[23:05:36.0982] entering update_baseband
[23:05:36.0982] update_baseband: registering for progress notifications
[23:05:36.0982] create_baseband_update_options: Got imeisv: 16
[23:05:36.0982] baseband updater options = <CFBasicHash 0x17533030 [0x59b710]>{type = mutable dict, count = 7,
[23:05:36.0982] entries =>
[23:05:36.0982] 0 : <CFString 0xcf1e38 [0x59b710]>{contents = "SystemRoot"} = <CFString 0x1761cb70 [0x59b710]>{contents = "/mnt1"}
[23:05:36.0982] 5 : <CFString 0xcf1dc8 [0x59b710]>{contents = "DisallowFusiing"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982] 6 : <CFString 0xcf1f48 [0x59b710]>{contents = "autoSetupEnv"} = <CFBoolean 0x59b918 [0x59b710]>{value = false}
[23:05:36.0982] 7 : <CFString 0xcf1e48 [0x59b710]>{contents = "DataRoot"} = <CFString 0x1761e8e0 [0x59b710]>{contents = "/mnt2"}
[23:05:36.0982] 8 : <CFString 0xcf1d98 [0x59b710]>{contents = "forceUpdate"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982] 9 : <CFString 0xcf1f58 [0x59b710]>{contents = "disablePing"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982] 10 : <CFString 0xcf1eb8 [0x59b710]>{contents = "IMEISwVersion"} = <CFNumber 0x17533010 [0x59b710]>{value = +16, type = kCFNumberSInt32Type}
[23:05:36.0982] }
[23:05:36.0982] update_baseband: querying baseband info
[23:05:36.0982] bbupdater: BEGIN: Querying info at stage first
[23:05:36.0982] bbupdater: BEGIN: Preparing first stage
[23:05:36.0982] bbupdater: Requested boot mode: kBBUBootModeNone
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 5...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 4...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 3...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 2...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 1...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 0...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: END(kBBUReturnIOError): Preparing first stage
[23:05:36.0982] bbupdater: END(kBBUReturnIOError): Querying info at stage first
[23:05:36.0982] send_bbupdate_status: sending baseband update status to host
[23:05:36.0982] update_baseband: calling CFNotificationCenterRemoveEveryObserver
[23:05:36.0982] update_baseband: bbupdater error: The operation couldn\U2019t be completed. (BBUpdater error 3 - Failed creating a communication transport to baseband.)
[23:05:36.0982] 0: RamrodErrorDomain/3ec: update_baseband: failed querying baseband info
[23:05:36.0982] 1: BBUpdater/3: Failed creating a communication transport to baseband.
[23:05:36.0982] unable to convert ramrod error 1004
[23:05:36.0982] restore failed with CFError:
[23:05:36.0982] 0: AMRestoreErrorDomain/ffffffff: failed to update device firmware
[23:05:36.0982] 1: AMRestoreErrorDomain/ffffffff: ramrod firmware update failed
[23:05:36.0982] 2: RamrodErrorDomain/3ec: update_baseband: failed querying baseband info
[23:05:36.0982] 3: BBUpdater/3: Failed creating a communication transport to baseband.
[23:05:36.0982] waiting for host to acknowledge final status received...
[23:05:36.0982] void AppleUSBDeviceMuxXXXXXXXXXXXXXXXXXXX(mbuf_t) received reset, closing 0x97b1e4d0
[23:05:36.0982] recv(12, 4) failed: connection closed
[23:05:36.0982] unable to read message size: -1
[23:05:36.0982] received NULL message from host, expected final status
[23:05:36.0982] attempting to dump restore log
[23:05:36.0982] writing log file: /mnt1/restore.log -
hi, i had to restore my ipod 5G and it says its in recovery mode and its saying ipod software downloading but when its done it says it timed out i tried like 5 times what should i do
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer -
Hi
First sorry for my english
Last night, i got my ipod touch and i put a password on when i was watching a movie and with my badluck skill, i put a random password because i was distract Now, when i try to put the ipod in recovery mode and try to do the last patch, my ipod restart in the middle! After this, nothing workTry disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer -
My iphone 5 is stuck on recovery mode and itunes is not detecting my phone when pluged in
My iphone 5 is stuck in recovery mode and the phone is not being detected by itunes when the lead is pluged in, this all started when i was trying to update the phone to latest software any ideas????
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.
Maybe you are looking for
-
How to make the changes in Existing DC
hi I am new to the NWDI. We have created one trac and we have added one .SCA file to that. This file contains many DC's. I have imported this track in to NWDS. I am able to see the list of the DC in Development configuration prospective. Now i need t
-
How to disable fields on selection screen?
hi, i have two fields f1 and f2 on selection screen and two radio buttons r1 and r2. if i select r1, f1 should be input enable and f2 shuld be disabled. and if i select r2, f2 should be input enable and f1 shuld be disabled. i hav code like this SELE
-
How to set default date of 3 weeks(21 days) from today's date during page load?
I want to show the default date as 3 weeks from today's date during page load. For example ,i have given as adf.CurrentDate + 21 in EO for the attribute 'DueDate'. But it is showing me the date as 9.7.2013. 3 weeks default date is not getting set.If
-
classic 120gb stuck on disk mode and cant get it off and tried the reset ! before it went into disk mode it went it had red cross ? i read on the internet that this is a harddrive fault? please dont say it is! also there seems to be loads of this sam
-
No sound in multiple applications with 5.1 upmix
Hello, I already did some research about my problem but I did not find a solution for my problem yet. I configured my .asoundrc so that I have a permanent upmix from 2.0 to 5.1. But with the current configuration I cannot have multiple applications p