Recovery Mode MicroPhoto

When i connect my MicroPhoto to the PC. i get an error that the connection failed. (on my pc screen)
The last time it worked i used it for tranfering some programs (PC to PC)
I never used the moveable disk options so i cant format it now. Thats why i wanted te recovery mode to format my whole MP3 player.
I tried several times to startup the recovery mode but i doesnt work.
Can someone help me?
PC Specs,
Vista, 32-bit WMP (cant remove it or restore it to WMP 0)

To get a microphoto into recovery mode remove the battery push the power switch into the on position & insert the battery while holding the power switch in the on position then after the battery is in release the power switch? [url="http://forums.creative.com/t5/MP3-Players/How-do-I-access-Rescue-Mode-Recovery-Mode-on-my-player/m-p/274477#M5535">instructions here[/url]

Similar Messages

My Zen MicroPhoto goes straight to Recovery Mode and I dont know what to

Hey, I need help figuring out why does my Zen MicroPhoto goes into recovery mode now by itself. I had difficulties with the same issue with a Zen Micro. My Zen MicroPhoto had issues in the past where it would spontaniously restart and rebuild the library. I would one second listen to music on the bus and sit down slowly, then the music cuts and the zen microphoto resets itself. Can I get some help here?! I really dont want to resort to sending it out for repairs unless its a last resort.

lauren842012 wrote:
help my iphone 3g is stuck on recovery mode and i dont know what to do as its my first iphone and i got it second hand i stupidly tried to reset it on my laptop and i think i have buggered it up but i also got it unlocked a few days ago and i am worried i wont be able to use my 3sim in it anymore need help and ideas
thanks ......
Press and hold the Home and Power buttons on your iPhone until it shuts off.
Connect it connect it to your computer with th USB cable.
Press and hold down the Home button.
Hold it it down until iTunes says your device is entering recovery mode.
Now you should be able to Restore using iTunes.

Zen MicroPhoto or Micro stuck in Recovery Mode? Can't update firmware? Try this

I got these instructions from here:
http://blog.opsan.com/archi've/2005/09/3/472.aspx
This is the only thing that worked for me to get my broken Zen MicroPhoto up and running again. It was stuck in Recovery Mode and my XP SP2/WMP laptop wouldn't recognize when trying to load firmware or in Creative Media Explorer or WMP.
To Fix any problems with broken firmware form attempted "playsforsure"
firmware updates etc where your pc finds it as a 20mb dri've and it sits
in recovery mode and does bugger all:
1. Uninstall all creative software & drivers
2. Uninstall Media Player and Media Player runtime (will require a
reboot for each thing). This is done by going to add/remove programs and
uninstalling (this will put your pc back to wmp0).
3. Re-install the Zen Driver from the creative website and reboot (I just reloaded Media Explorer using my ZMP install CD).
4, Plug Zen in.
5, Make sure you have the firmware update ready, run it but don't click
the language bit yet), leave the mouse hovering over your language
selection. (for ZMP, just start firmware exe file, there is no language selection. You can get the firmware update from Creative's site, go to SUPPORT and then DOWNLOADS).
6. On the Zen- select "reload OS" (on ZMP I believe it is Erase or Reload Firmware, something like that, don't have it in front of me).
7. As soon as it flashes up "reload new firmware now via USB" click the
language button
8. Now the pc should find it and allow you to re-load the
firmware. (it may take a few attempts)
9. Once complete, click close and restart the pc. Everything should now
be fine.
0. Once all is working, you can re-install WMP and it will work fine.
I hope this helps somebody.
Message Edited by mdscriber3 on 08-04-2007:2 AM

does that mean when in vista or xp same problem still occurs?
http://storeyourpicture.com/images/s...lectronics.jpg

MicroPhoto Frozen Screen Problem & Recovery Mode Not Help

Hi
The warranty on my 8GB MicroPhoto has just expired by two months and has decided that now would be a good time to stop working.
Basically when I switch it on it freezes at the Creative Logo, I've tried the steps outlined on the Creative Support website which recommends formatting through the recovery mode. However when I access the recovery mode and select Format it displays a formatting dri've message but then stays like that until the battery runs out. I've also tried removing the FirmWare but the same thing happens.
Lastly my PC has also stopped recognising the player when I connect it up via USB.
Any ideas?
Cheers

Sounds like it is a problem with the harddri've. Might have to get you a new?player.

Zen microphoto stuck in recovery mod

Okay, so my zen is stuck in recovery mode. I've tried taking the battery out for hours, and i've tried each option in the recovery mode, all of which do nothing. I've plugged it into my computer and it's recognised, but when i run the Creative recovery tool, it says my zen is not connected and so nothing can be done. I don't know what else to do...
I'm going insane, and getting really impatient. I'm pretty computer illiterate so you'll have to talk dumb to me

Mine is doing the exact same thing. I have tried everything (and, unlike Jellypigs , I am an advanced computer user / system designer/builder).
Whenever I choose any of the options ("Clean up", "format" "Reload firware" "reboot" ) It says that it is doing it, but nothing actually happens (I left it "reformatting" overnight last night and nothing happened). If I try to initiate a firmware reload from the pc (windows does detect the player) the program asks me to plug in the player even though it already is.
Message Edited by hedgesjulie on 03-27-2008 06:25 PM

Trouble in Recovery Mode

? I'd choose the "Reload firmware" before connect the Creative Micro Photo 8Gb to the PC. Now, when I start the player, it's alway in Recovery Mode, and I cannot change anything from that.
I've get a firmware version "ZenMicroPhotoP4S_PCFW_LB__20_0.exe" for upgrade and set up, but the PC show that the Player is not conect, while I had saw that it connected in Window Explore.
My OS is Window XP SP2, WMP Ver.0
I had try with "ZENMicroPhoto_PCFW_L6__3_0.exe" and "ZenMicroPDE_PCFW_LB___0.exe" but still have that problem, thay not recognize my device.....
What should I do to fix this problem?
Many thanks

Zen Micro firmware will NOT work on a MicroPhoto. Use the current firmware for your player which is in the link I posted. First open the file before you connect the player.While the player is in recovery mode choose format >cleanup.after those have completed then choose reload firmware & connect the player. If the Autoplay window opens ignore it. click update /upgrade & it should complete.Message Edited by coachop94 on 04-03-2009 :05 PM

My iPhone would just randomly give me a blue screen and then restart--did that a bunch of times between Tuesday and last night. As of last night, it WILL NOT come back on. iTunes says it's in recovery mode....what does all of this mean???

Tuesday night I was texting a friend and when I went to open her message, my screen went blue and restarted. I just wrote it off as weird and went on about my business. Later that night, I tried to turn on my phone and it would not turn on. I plugged it up, held down the power button, and pressed the home button all numerous times. I looked online and it said to do a "hard reset" by holding down the power and home button at the same time--my phone then came on. Throughout Wednesday, it would give me a blue screen and restart--nothing major just really annoying. I took it to the local Verizon store where I bought the phone from and he said that it was some type of hardware defect and I was still under my year warranty so I could get a new one for free--the free phone won't be here until tomorrow, Saturday. I took it home and it didn't give me any trouble for a couple of hours. The next day it was cooperating and then I left town for a little while and it acted up (blue screen and then restarting) a few times. When I got home, it acted up again and so I restarted the phone and it was working fine. A few minutes later, I tried to check my messages and the phone was off again. No matter what I do, my phone will not come back to life. It had at least 45% battery last time I looked at it. I decided to plug the phone up to my computer and see what it did--my computer recognizes that there is a phone hooked to it and it says that it's in "recovery mode". It also said that if I'm having issues with my phone, that I need to reset the phone via iTunes. I guess the questions that arise are
1. Why is my phone doing this?
2. If I reset my phone, will it go back to working again? I ask that because I don't want Verizon to charge me $300 when they send me the replacement phone and I won't need it (assuming that the phone decides to work once it's been reset).
3. What type of hardware defect is this that is causing this issue, not only with my iPhone 5S but others as well?
4. Shouldn't people be notifying Apple and letting them know that they need to fix this issue?
5. Should I report this issue to Apple even though I didn't buy the phone directly from them, but through Verizon?
Any help that anyone could give me would be greatly appreciated! This whole situation has me stressed out and seriously confused.

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

My iPod Touch is stuck in recovery mode after I left it on while updating!!!

I was updating my ipod touch 3rd generation (ios 4.3, i think) and I saw a wasp and left the computer on in the middle of the updating process and now the ipod is stuck in recovery mode and it says the only way to get it out is to recover it, but that will erase everything!!! HELP ME!!! until i get an answer      I HATE YOU, APPLE URGG
operating system: whatever the latest available to itouch is.

Without knowing what the error message said all I can suggest is:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT201263 my iphone 4 went into recovery mode & will not restore. Unknown error 21 comes up on iTunes. Please can someone offer any ideas for a solution?

I have an iphone 4 nearly 2 yrs old. It has worked perfectly for that time. On Friday last (whilst away on holiday) I took the phone out of my pocket & it was lifeless. I tried switching it on, no joy, I tried the power/home button reset no joy. I plugged it into a mains charger & it came on but had a banner across the screen saying "verification required". I removed the charger & decided I would try again when I got home so I could connect to my PC & iTunes.
At home I went through the whole above process again but when I plugged it into the mains again it just had the Apple logo going on/off repeatedly. I plugged the phone into my PC & the apple logo appeared followed by the "connect to iTunes". In iTunes I get the banner "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes". So I click on "OK" the "Restore" then a banner asking if I'm sure I want to restopre the iPhone appears, press "Restore & Update". iTunes starts to remove the software, veryfies it with Apple & then another flag "The iPhone could not be restored. An unknown error occurred (21) which appears to be a security issue.
I thought the above problem was something to do with O2 because I picked up my new iPhone 4S last Tuesday but was unable to set it up until I got back from my holiday, O2 say it isn't anything they've done.
My question is has it happened to anyone & can anybody offer a solution, is it a hardware or software issue?

Please see the two articles below:
http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125

My ipod touch isn't being recognized by iTunes or my computer. It's in "ipod recovery mode"?

My ipod touch 5th generation is not being recognized by my computer under devices or in itunes; however, when I click on devices and printers it comes up under "unspecified" and is labeled as "Apple mobile device usb driver." I right clicked the icon and hit troubleshooter and it opened itunes and told me I should restore and update my ipod. I did this twice and nothing has changed, it is still not being recognized. This is a big problem because the only thing that will pop up on the screen of my ipod is the symbol for the usb plug with an arrow pointing to the itunes symbol (meaning plug into itunes I assume). I have tried restarting my ipod and restarting my computer and nothing is working. I have the most recent version of itunes. How do I fix this?

first try:
iOS: Device not recognized in iTunes for Windows
next
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

How do I get rid of error code 2001/2006? My phone is in recovery mode. I have tried several different cords, all USB ports, my macbook, and a friends PC. This is the second time my phone has done this, the first time it was an easy fix.

I have an iPhone 4. It is in great condition, always protected. A couple months ago, it randomly went black and wouldn't turn on. I put it in recovery mode, plugged it in to my MacBook Pro and would get error code 2001 then I'd get error code 2006. I read some different forums and many people said to try using a different USB port and different cords. The last cord I tried, worked and my phone was back. Last night, my phone did the same exact thing. So I used the same method I used last time, however nothing has worked. I tried plugging it in to a PC and that didn't work either. This seems like a hopeless problem that's going to continue to happen. Any advice?

Soooooooo.... You obviously need to restore the device
It seems that you have tried several options to restore it. What I would do is leave it plugged it and hold down the Home button AND the Power button together till you see the white apple appears. Then let go of the Power button but continue to hold the home button. You should get the message in iTunes again saying that the iPhone needs to be restored. Hit OK then RESTORE.
Hope this helps!!

How do I not update my Ipod? It is in recovery mode, and I don't want to lose my files, so is there any way I can just cancel and go back to what I had?

Title ^
So yeah, is there anyway I can just go back to what I had? c:

If one of these programs will not kick the iPod out of recovery mode:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
You will have to restore and thus erase the iPod
You might be able top get some info off the restored iPod by:
via How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
iPod recovery software to restore lost music files
-iPod touch Deleted Photo Recovery Tips You Should Know

Can't restart Yosemite in Recovery Mode

I installed Yosemite on my mid-2012 MacBookPro yesterday, seemingly without difficulty. But: when I discovered that I didn't have permissions to read or write on anything, i ran Disk Utility. I tried Verify/Repair Permissions first, which discovered a lot of missing or changed permissions. Then I tried Repair Disk and the process stopped halfway through and gave me an error message essentially saying I needed to reboot in Recovery Mode and re-install. Fine--except it won't reboot in Recovery Mode. No matter what key combinations I try, it won't reboot into anything other than regular Yosemite. I had made a bootable backup of my hard drive before installing Yosemite, so I tried booting from that but, again, no choices of boot mode. Then I changed the Startup Disk preference in System Prefs to the disk with the clone on it and restarted: same result. Now what??

endre2714 wrote:
Hey everyone!
FireVault was turned on since I purchased my Macbook Pro in October.
Please read the warranty paperwork that came w/your computer.
You have 14 days to return the computer w/no questions asked.
You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems & your concerns. It's what you paid them to do.

IPad abruptly quit, started playing Gaga's Scheibe song and will not now show up in "Devices" on iTunes. Keeps telling me it detects an iPad in Recovery mode. Cannot get past that. Help!

How do I recover the data on my iPad2? It abruptly quit while I was shutting down and started playing Gaga's Scheibe from "Born this Way" -- it was not coming from My Music or iTunes. I pressed both home key and side button to get it to stop and plugged it in to recharge. The USB connector to iTures screen showed up and that's as far as I can go. Had an appointment at the "genius bar" this morning and all they tell me is that they can "restore" which will not save any info I have. The last backup I did was April 2013 (I know, very stupid of me). iTunes does not recognize the device. It's all greyed out and I get a window that says iTunes detected an iPad in Recovery mode. That's as far as I can get. I really don't want to lose any data. Please help me. Thank you. Nancy

You have no choice but to lose your data back to the last backup you made.
Here's how to do the recovery. Note you may have to try to get into recovery mode more than once to succeed:
HT1808
I'm sure next time, you'll be more vigilant about keeping current backups.

Ipad 2 not detected in recovery mode on my ASUS Windows 7 laptop

I have had this issue on all my idevices since I got this laptop, so this isn't directly associated with the new update.
I can sync my idevices with itunes on my laptop without any issues, but every time I try to install an iOS update, when it get to the stage where it is "preparing to restore your device" or some such, the laptop installs a new device driver and then itunes just spins awhile until it finally spits out error 1601 and then the device is stuck on the screen where it prompts you to connect to itunes.
At this point itunes on my laptop will not detect the device. I can see it listed in my device manager and it claims the usb driver is working correctly, however it no longer makes the beeping sound when I plug or unplug the cable, though it does disappear and reappear in device manager, which indicates it recognizes ipad plugged in, but not in the same way.
I have tried all the advice on the apple website re: unintalling reinstalling itunes an all it's components, disabling antivrus, firewall and non essential services, removing usb devices etc to no avail.
If I take my device over to my parents 32 bit vista desktop it recognizes it, installs the driver and itunes recognizes an ipad in recovery mode and I was able to restore the software and update to the new iOS on that desktop, then had to bring it back to my laptop to restore the software from my last backup.
My first question is....when the new ios is being installed is it putting the device into recovery mode as part of the process or is it going into recovery mode because the process errors out? If it's the former, then my assumption is that the whole issue is that for some reason something on my laptop is stopping itunes from being able to recognize my ipad while in recovery mode. If the later, then ?
My second question is....is the problem the driver, the usb port or something else unique to the laptop? I tried uninstalling and reinstalling the driver, but if i let winows detect it after uninstalling it can't find a driver and i get the exclamation point. If i try to manually install per the apple instructions, it tells me that the driver file is not compatiable with my device. So either windows is somehow installing the wrong driver while device is in recovery or the comp isn't detecting what type of device it is properly or ?
I'm hoping maybe i can get the next os update over the cloud and this will become a non-issue, but having to go borrow a pc to update this thing gets really old as the laptop is my only computer, so any ideas would be appreciated.
Laptop is an ASUS ROG - not sure the exact model running 64 bit Windows 7 It has two usb ports and i have the same issue on either one.
The PC i successfully updated my device on is an older Dell running a 32 bit version of Vista

Hopefully this will help you. Try placing your iPad in recovery mode again. You may have to try this a few times.
iOS: Unable to update or restore

Recovery Mode MicroPhoto

Similar Messages

Maybe you are looking for