Recovery mode twice today (after software update)

I have not had one problem with my iPhone 4s since I got it in early December. Today however I downloaded the newest software for the iphone and twice today I have had to go thru the recovery mode. I use the phone, it locked up and the stayed on the apple logo till I finally figured out how to get to the recovery mode. Twice today. Both times after they release a software update.. Hardly a conicidence..
Should I just take it to the store if/when it crashes for a third time today?

Yes take it to the store. They should cover it even if you didn't get the extended warranty.

Similar Messages

  • My ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

    my ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Will I lose my photos in recovery mode? I tried to update to latest software and I received a message that iphone needs to be updated to factory settings.  Please help.  I cannot use iphone.

    will I lose my photos in recovery mode? I tried to update to latest software and I received a message that iphone needs to be updated to factory settings.  Please help.  I cannot use iphone.

    I would "guess", since you were in the middle of backing up, your backup is corrupt & most likely unusable. Only one way to find out though, & that's by trying to restore from that backup. If your pics are not there, they are gone.

  • New iPad with retina display with 30 pin connector mirroring to TV with dvi adapter problems after software update

    Hi. Good day to everyone my New iPad with retina display 30 pin connector will not mirror to TV even with divi adapter after software update. Adapter works fine. Or is it a software glitch with IOS 7.04? I've tried resetting and reconnecting nothing seems to work.

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • Ipod touch4g  is not detected in pc and itunes after software update

    after software update is done. when i connect my ipod touch it is not detected in pc (windows 7) and in itunes please help me anyone.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • IPhone5S won't turn on after software update

    iPhone5S is bricked after software update.  Apparently this is becoming widespread.  Hello, Apple??????  http://www.techienews.co.uk/976861/apple-ios-7-0-6-update-allegedly-bricks-iphon e-5s-ipad-air/  http://www.thebitbag.com/iphone-5s-and-ipad-air-bricked-by-apple-ios-7-0-6-updat e/70286

    Hey Stheus3,
    Thanks for the question, I understand how frustrating this may be. It sounds like the update process may have been interrupted, and to resolve the issue, we’ll need to restore your device in recovery mode with iTunes:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    If your device is not recognized in iTunes for Windows while in recovery mode, see this article (Specifically Step 5, sub-step “If the device is not recognized while in Recovery Mode”)
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • Iphone in recovery mode,i'm restoring and updating to itunes but download cannot be completed... my phone wont open, i can't even turn the power on.what to do? pls help

    iphone in recovery mode,i'm restoring and updating to itunes but download cannot be completed...
    my phone wont open, i can't even turn the power on.
    what to do? pls help
    (iphone 4  and  iphone 4s)

    So I just did this on my iPhone 4 and it worked like a charm it unlocked it immediately. My phone was put into recovery mode and I know that not all data is deleted it just puts the phone into a sort of hibernation in order for the files to stay uncorrupted. I went to http://www.recovery-ipad.com/iphone-stuck-in-recovery-mode.html  downloaded the software it unlocked my phone in a matter of minutes. Calls, messages, photos, apps, and voicemail was all there as if it never happened  If you leave it unregistered you don't have to pay for it works for either windows or mac. Hope this helps!

  • HT201263 iphone in recovery mode,i'm restoring and updating to itunes but download cannot be completed... my phone wont open, i can't even turn the power on.what to do? pls help

    iphone in recovery mode,i'm restoring and updating to itunes but download cannot be completed... my phone wont open, i can't even turn the power on.what to do? pls help

    So I just did this on my iPhone 4 and it worked like a charm it unlocked it immediately. My phone was put into recovery mode and I know that not all data is deleted it just puts the phone into a sort of hibernation in order for the files to stay uncorrupted. I went to http://www.recovery-ipad.com/iphone-stuck-in-recovery-mode.html  downloaded the software it unlocked my phone in a matter of minutes. Calls, messages, photos, apps, and voicemail was all there as if it never happened  If you leave it unregistered you don't have to pay for it works for either windows or mac. Hope this helps!

  • My computer couldn't find my playbook anymore after software update!!!

    After software updated to 1.0.7.3312, my computer couldn't find my playbook anymore.
    First couple time it could find normally as like before, few times later it could not anymore!!! LOL.
    I tried connect to the other PC either in my office and home several times, exactly same happen again.
    Anybody got same problem that I have? Please advice me.
    My computers have Window7, 32bit.

    Please review the knowledge base articles here:
    Article ID: KB27424 Identifying and troubleshooting issues with the BlackBerry Desktop Software detecting a USB connected BlackBerry PlayBook
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • After software update nokia 301 fail to connect wi...

    After software update to v 08.02 computer can't see my phone when Iconnect it via usb cable. Can sombody be on help?

    Where do you look?
    Windows Device-Manager or Nokia Suite? If it is the latter, please, give us Suite » Menu » Help » About » System Information » Copy text to clipboard. Furthermore, go to Nokia 301 » Menu » Settings » Connectivity » USB data cable: which mode do you use?

  • "Unable to find driver for this platform" after software update

    After today's software update my MacBook Pro won't start when the required restart is completed. I get to the "pre-login screen" where I type in my password, and then I end up at a screen saying I have to hold down the power button and then restart the computer. It also says "Unable to find driver for this platform: \"ACPI\"...
    What is there to do now? Will I lose everything on my harddrive if I reboot the computer completely?
    Thanks for any help,
    David

    After today's software update my MacBook Pro won't start when the required restart is completed. I get to the "pre-login screen" where I type in my password, and then I end up at a screen saying I have to hold down the power button and then restart the computer. It also says "Unable to find driver for this platform: \"ACPI\"...
    What is there to do now? Will I lose everything on my harddrive if I reboot the computer completely?
    Thanks for any help,
    David

  • When i turn on my iphone 5s gold,it keeps on showing the apple logo then turns off. i have put it in recovery mode twice. it will work a week or two then back again. please help! thanks you

    when i turn on my iphone 5s gold,it keeps on showing the apple logo then turns off. i have put it in recovery mode twice. it will work a week or two then back again. please help! thanks you

    hi
    ... i  have  a similar problem
    but  just  with  the sleep botton.
    fist use  your adapter with other iphone/itouch ... is posible itś the  problem
    second ..  let your  phone charging
    ...normally if  we  conect  our  phone ... after  some minuts  it's put on.
    after 2 hours ... trate   to use  it ... if  after  it  your phone continue same... could  be qaa electrical/physic problem
    please  if you  have a guaranty use it.
    im  sorry but  my english   is terrible.

  • After software update macbook pro works very slow and no applications will open

    Updated software today, since software updated macbook is running really really slow (approx. 4 mins from pushing the power button to home screen) and no applications including itunes will work. Anyone any ideas???

    kBirr wrote:
    Tried this, to no avail, applications (itunes, pages, iphoto) still won't open & MacBook still running very slow
    thanks anyway
    Did you restart your computer after repairing permissions?
    Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
    Your system info says:
    MacBook Pro
    Yet, in your postings you say:  "MacBook" which is an entirely different computer.  Typo?  Are you in the correct community area?

  • Nokia E66 - Lost Txt's after software update - can...

    Can anyone advise me if it is possible to retrieve my messages from my phone after software update?
    I have tried 'some' recovery software but they do not recognise the 'phone' as a part of my pc.
    Has anyone had similar issues?

    If you didn't make a backup before updating, all data is lost.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Problem restarting after software update

    Computer is fine, drive 40% full, no speed problems...
    But it just won't restart after software update runs, nor will it restart or shut down from finder.
    Problem solving so far: Safe boot, reset pram, ran disk utility, ran disk repair using install disk, ran fsck -y, ran disk warrior.
    Is annoying. ANy ideas anyone? If not, what is the procedure for updating using sudate and terminal, as when I use software update, a force shut down will not install.
    ANy ideas folks?

    Some general advice on updating:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications and turn off energy saving and screensaver.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

Maybe you are looking for