Recovery not effective...

I have an HP Laptop, that started acting up by saying "Preparing Automatic Repair" and would go to a black screen. So i ordered the recovery discs, and tried to do a recovery. I tried going into the BIOS and making the appropriate adjustments, so the computer would read the disc when it was supposed to. It will start to read the disc, but then goes to a black screen again. So frustrated....is this thing worth the effort?

Hello @Frustrated2238 ,
Welcome to the HP Forums!
I understand you're unable to boot up your notebook or run the system recovery.
Have you tried running the built in recovery from the HP Recovery Manager? You can try accessing this by tapping F11 while the system boots.
If you're unable to run the recovery or boot the PC you may have a defective RAM card. The recovery loads the information to the RAM before running, the same way your operating system does.
Try removing one of the RAM cards and testing. If the issue persists, swap it with the other card in the same slot. If that doesn't work, try either of the cards in the second DIMM slot to rule out a defective DIMM slot.
If you determine you have a bad DIMM slot you will need to have the motherboard repaired. To this I suggest calling HP Phone support for the available service options. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
If you determine there is a bad RAM card, you can order a replacement card here: HP Part Surfer or if you are still in warranty you can contact HP Phone support for a replacement card.
If swapping around the RAM doesn't work, try going through these documents for boot issues:
Computer Does Not Start and the LEDs Blink or the Computer Beeps.
Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
Testing for Hardware Failures (Windows 7, Vista) or Testing for Hardware Failures (Windows 8).
Hopefully this information helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Similar Messages

While "Invoice Cancelling- Accounting entry not effected in Trial balance"

Dear All,
Any one knows this please revert back.this Issue is very urgent (We have to Close the Periods)
Issue: While "Invoice Cancelling- Accounting entry not effected in Trial balance"
Invoice which is cancelled and accounting events for Invoice & Cancellation is taken place, but the entry for cancellation is not appearing in the GL Hence the reversal effect of expense is not seen.
I can able to see the Reversal Entry in Payables > Reports > View Accounting A
Here > Tools > View Accounting Events > View Journal Entries > Show Addtional Information > Transfer to GL Status is "No" after that i have Run the Transfer Journal Entries to GL even its not appearing in GL and not transfer to GL.
@Have to Resolve this as soon as possilble, plz any one can lets guide me
Reagrds,
senthil

Plz Update this asap.....

HT201320 This last week, I updated my iPhone with iOS6 and now my Yahoo Mail no longer works. I've deleted and restored the account without fixing the problem. The iOS update did not effect my iPad. Anyone have a suggestion?

This last week (of 17 Sep 12) I updated my iPhone 4 to iOS 6 and now my Yahoo mail does not work. I keep getting a "Yahoo server busy" message. This problem has not effected the update to my iPad 3 - it works fine. In addition, I have deleted and added my Yahoo mail - same result. Looking for ideas on repairing the link between iOS 6 and Yahoo. Cheers

Same here, albeit with a 3G and both a work Exchange account and personal Gmail are out of action. Reentered my password on the Gmail to no avail.
Unfortunately it seems that increased success has come too fast to Apple, it's starting to display Microsoft-like behaviors, e.g., releasing stuff and letting the customers serve as the beta / guinea pigs.

Help! 13" macbook pro will not boot. Tried running disk repair from HD recovery, not repairable. Trying to reinstall OSx Lion, says disc is locked. Do I have to erase the drive and lose everything? I also have Bootcamp installed, will boot to Win OK

Tried running disk repair from HD recovery, not repairable. Trying to reinstall OSx Lion, says disc is locked. Do I have to erase the drive and lose everything? I also have Bootcamp installed, will boot to Windows no problem.

Hotrodmkviii,
try rebooting in Recovery mode, but when you reach the Mac OS X Utilities menu, run Terminal (from Utilities in the menu bar) instead. Inside the Terminal window, give it the following command, and then press the Return key:
diskutil list
Please include in your reply the output from that command.

I had a second hard drive added to my Mac Pro. How do I format it and not effect my orginal hard drive?

I had a second hard drive added to my Mac Pro. How do I format it and not effect my orginal hard drive?

Just format it with Disk Utility as mentioned above. Select the new disk on the list at the left. Click the erase tab. Specify Mac OS Extended (Journaled) if not already specified and give the disk a name of your choice. Then click the erase button.
That's the simplest way to format a disk with a single partition (volum). If you want to create multiple volume (partitions) then click the Partition tab instead of Erase. You can then use then specify a number of volumes and size each volume by specifying its size or just dragging the slider in the bootm right of each partition. Give each a name as before and again Mac OS Extended (Journaled). Click Apply button to create the partitions.
Since you appear to be new at this just "play" with the erase and partition settings so you can become comfortable with them. So long as you have the new disk selected on the left you can't really hurt anything since it's a new disk and no data to loose. You can always go back and erase it back to a single partition.

Changeover from DBM to SLM not effecting

Hi,
I have created a depreciation key in transaction AFAMA with a changeover from DBM to SLM, provided when SLM depreciation is higher than DBM in 2 phases. But when I run the depreciation for a asset, the changeover is not effecting rather it is calculating depreciation @ 50% across the life of the asset, instead of calculating the depreciation @ 25% DBM.

Here we are not setting any changeover year, as per the req, it should compare the DBM with SLM, and whenever the SLM is higher than DBM dep, the changeover should become effective.
Here how can we chk the changeover year?

Changes done in options are not effected - not able to change home page

When I do changes in the tools-options menu the same is not effected in the next re-start of firefox. For example if I change my home page to a new web page, the same is not opening in the next restart of firefox. Not only this any change done in the options menu is not effected

See:
* http://kb.mozillazine.org/Preferences_not_saved
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols

Scratchy noise coming from top end of keyboard. Not effecting performance but very noisy and worrying! What is it? Is my computer seriously damaged? Is it easily fixed? Thanks for any help

Scratchy noise coming from top end of keyboard. Not effecting performance but very noisy and worrying! What is it? Is my computer seriously damaged? Is it easily fixed? Thanks for any help

It would be helpful if you were to identify the model of MBP you have.
The noise makers on a MBP are the fan(s), the HDD and the optical drive. Can you locate the exact position where the noise is coming from?
Ciao.

Smart style is not effecting in smartforms print preview

Hi All,
i have created my smart style with HELVE font style and i have created paragraph formats for my smart style. And i assigned one of my paragraph format to header data-> standard format.
I have used this smart style in my smart form. But while doing print preview, my smart form output is not effected by the smart style which i have given. Output is displaying in the form of my smart styles-> header data-> standard format's font wise. Not effecting the paragraph formats what i have given in my smart form text editor.
could anyone reply me how to solve this issue.
Thanks in Advance.

You can do one last thing from your side to ensure you are absolutely right. Open your smartstyle and create a paragraph format under paragraph node, with name P1 (for example). Now in P1, keep the font as Helve and save and ACTIVATE.
Go back to your smartform, open the concerned text node. Select the text in it and from the drop down select P1. If you have not assigned this smartstyle to your form in attribute node, in that case you need to assign this smartstyle to your form (or in the output option tab of the text node) to get the P1 in the drop down.
Save and activate the smartform. And let us know if it solves your issue.
Cheers,
Anid

Titles are not visible, they show up on timeline as a grey box no text does not effect other events or projects

titles are not visible, they show up on timeline as a grey box no text does not effect other events or projects. could this have something to do with motion

Without seeing the timeline it sounds as if they've been off. Maybe you pressed the V or the role is switched off in the timeline index.

Deleting line itmes not effecting condition records -?

Hi Experts
In my order first time discounts are working fine.
If I add any new line items then also working fine.
But when I deleted line itmes from the order the discount is not effecting as like previous. That means when ever I deleted line item my condtion records are not reading immediately according to my settings.
If I cahange the quantity again for the remaining line item then its working fine.
<b>(Hope experts understand this problem)</b>
Do I need to configure some where to effect correctly my condition record or do we need to use any user exit for the cahnge in the order or deleting the line item in the order?
Any thoughts will be great help ful to me.
Thanks
Prasad

Hi Prasad,
firstly whenever you add a new line item the sytem will automatically calculate the pricing for it , now as you said it is not working when you delete the line item if i am correct then why dont you double click on your line item and go to Conditions tab and there you would find out a option called update , select the second option carry out new pricing and then i think it should give you the new correct pricing.
Hope this helps
Cheers

Managed Standby Recovery not active

Dear All,
My database version is:
SQL> select banner from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
OS:RedHat 5.5
My current configuration is:
We have two node RAC primary database and a local standby database.
And TWO NODE RAC DR (REMOTE)STANDBY DATABASE
while checking (REMOTE WHICH IS TWO NODE RAC)dr synchronization we found archive since yesterday has not been applied.
But local dr is fully sinc with the primary database.
When i have executed 'ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL' it says
SQL> alter database recover managed standby database cancel;
alter database recover managed standby database cancel
ERROR at line 1:
ORA-16136: Managed Standby Recovery not active
I manually copied the archive log which where missing in the remote standby database and then register those archive log.
after that when i manually tried to recover the standby database it has given me following error.
sql>recover automatic standby database;
ORA-00283: recovery session canceled due to errors
ORA-01124: cannot recover data file 1 - file is in use or recovery
ORA-01110:data file 1: '/database/ctmis/system01.dbf'
please please help me to resolve the issue.
Thanks and Regards
Monoj Das

according to my understand
Node1,Node2 is having node1-standby node2-standby in RAC environment right?
on which node logs ur trying to apply on which node standby? (node1 ==>node1-standby or node2 ==>node2-standby)
check it...hope it will work or not sure :)
standby side...
rman target /
RMAN>crosscheck archivelog all
then try to recover..will see ..
if not
check with support.oracle.com through SR.

ORA-16136: Managed Standby Recovery not active

Hi
I am trying implement the dataguard in the windows platform. And this is my first time. Right now iam trying on physical standby. i have done everything as per the document. But iam getting some error. After giving the
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
SQL> ALTER SYSTEM SWITCH LOGFILE;
SQL> recover managed standby database cancel;
// I am getting error
ORA-16136: Managed Standby Recovery not active
When just like that i tried to open the standby database in read only mode, i am getting error
SQL> alter database open read only;
alter database open read only
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\DB1\SYSTEM01.DBF'
When i checked the alert log file of Primary Database, it shows:
PING[ARCo]: Heartbeat failed to connect to standby 'db2sby'. Error is 1031.
Wed Sep 01 14:10:27 2010
Thread 1 advanced to log sequence 337 (LGWR switch)
Current log# 2 seq# 337 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\DB1\REDO02.LOG
Wed Sep 01 14:10:28 2010
Deleted Oracle managed file C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\DB1\ARCHIVELOG\2010_02_25\O1_MF_1_224_5RD10Z5V_.ARC
Wed Sep 01 14:14:53 2010
Error 1031 received logging on to the standby
Wed Sep 01 14:14:53 2010
Errors in file c:\oracle\product\10.2.0\admin\db1\bdump\db1_arco_2156.trc:
ORA-01031: insufficient privileges
PING[ARCo]: Heartbeat failed to connect to standby 'db2sby'. Error is 1031.
Wed Sep 01 14:19:53 2010
Error 1031 received logging on to the standby
Wed Sep 01 14:19:53 2010
Errors in file c:\oracle\product\10.2.0\admin\db1\bdump\db1_arco_2156.trc:
ORA-01031: insufficient privileges
And when i checked alert log file of stand by database:
Wed Sep 01 14:13:19 2010
Errors in file c:\oracle\product\10.2.0\standbyy\admin\db2\bdump\db2sby_dbw0_3060.trc:
ORA-01157: cannot identify/lock data file 9 - see DBWR trace file
ORA-01110: data file 9: 'C:\TSUNDO12.DBF'
ORA-27086: unable to lock file - already in use
OSD-00001: additional error information
O/S-Error: (OS 101) The exclusive semaphore is owned by another process
--> The above error of Standby was coming for each datafile such as system, users etc.
Kindly Help me.
Shiyas M

here is the pfile of Primary Database:
db1.__db_cache_size=188743680
db1.__java_pool_size=4194304
db1.__large_pool_size=4194304
db1.__shared_pool_size=83886080
db1.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/db1/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/db1/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\db1\control01.ctl','C:\oracle\product\10.2.0\oradata\db1\control02.ctl','C:\oracle\product\10.2.0\oradata\db1\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/db1/cdump'
*.db_16k_cache_size=4194304
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='db1'
*.DB_UNIQUE_NAME='db1prim'
*.LOG_ARCHIVE_CONFIG='DG_CONFIG=(db1,db2sby)'
*.LOG_ARCHIVE_DEST_1='LOCATION=C:\oracle\product\10.2.0\ARCHIVELOG VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=db1prim'
*.LOG_ARCHIVE_DEST_2='SERVICE=db2sby LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=db2sby'
*.LOG_ARCHIVE_DEST_STATE_1=ENABLE
*.LOG_ARCHIVE_DEST_STATE_2=ENABLE
*.LOG_ARCHIVE_FORMAT=%t_%s_%r.arc
*.LOG_ARCHIVE_MAX_PROCESSES=30
*.FAL_SERVER=db2sby
*.FAL_CLIENT=db1
*.DB_FILE_NAME_CONVERT='C:\oracle\product\10.2.0\Standbyy\oradata\DB2','C:\oracle\product\10.2.0\oradata\db1'
*.LOG_FILE_NAME_CONVERT='C:\oracle\product\10.2.0\Standbyy\oradata\DB2','C:\oracle\product\10.2.0\oradata\db1'
*.STANDBY_FILE_MANAGEMENT=AUTO
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=db1XDB)'
*.job_queue_processes=10
*.open_cursors=300
*.pga_aggregate_target=95420416
*.processes=150
*.recyclebin='OFF'
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=287309824
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/db1/udump'
*.utl_file_dir='OCM_CONFIG_HOME/state'
Here is the Pfile of standby database:
db1.__db_cache_size=188743680
db1.__java_pool_size=4194304
db1.__large_pool_size=4194304
db1.__shared_pool_size=83886080
db1.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\Standbyy\admin\db2\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\Standbyy\admin\db2\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\Standbyy\oradata\db2\control001.ctl','C:\oracle\product\10.2.0\Standbyy\oradata\db2\control002.ctl','C:\oracle\product\10.2.0\Standbyy\oradata\db2\control003.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\Standbyy\admin\db2'
*.db_16k_cache_size=4194304
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='db1'
*.DB_UNIQUE_NAME='db2sby'
*.LOG_ARCHIVE_CONFIG='DG_CONFIG=(db1,db2sby)'
*.LOG_ARCHIVE_DEST_1='LOCATION=C:\oracle\product\10.2.0\ARCHIVELOG VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=db2sby'
*.LOG_ARCHIVE_DEST_2='SERVICE=db1 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=db1'
*.LOG_ARCHIVE_DEST_STATE_1=ENABLE
*.LOG_ARCHIVE_DEST_STATE_2=ENABLE
*.LOG_ARCHIVE_FORMAT=%t_%s_%r.arc
*.LOG_ARCHIVE_MAX_PROCESSES=30
*.FAL_SERVER=db1
*.FAL_CLIENT=db2sby
*.DB_FILE_NAME_CONVERT='C:\oracle\product\10.2.0\Standbyy\oradata\DB2','C:\oracle\product\10.2.0\oradata\db1'
*.LOG_FILE_NAME_CONVERT='C:\oracle\product\10.2.0\Standbyy\oradata\DB2','C:\oracle\product\10.2.0\oradata\db1'
*.STANDBY_FILE_MANAGEMENT=AUTO
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area\DB2SBY'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=db1XDB)'
*.job_queue_processes=10
*.open_cursors=300
*.pga_aggregate_target=95420416
*.processes=150
*.recyclebin='OFF'
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=287309824
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\Standbyy\admin\db2\udump'
*.utl_file_dir='OCM_CONFIG_HOME/state'

IPC requirement does not effect sales order

Hi,
I wrote a pricing requirement in java extending RequirementAdapter.
I uploaded it to the CRM system. When the requirement is called, it writes messages to the VMC log and i can see the result of the requirement : "true" or "false" .
The problem is that the result of the requirement does not effect the condition in the sales order - nothing happens no matter what the result value is.
What should I do in order to get an error message in the sales order when the requirement returns false?
Thanks
Tomer

Hi Michael,
If the requirement will not trigger any error message by default according to the returned value, what excaly do I need to do in order to achieve that? Is there a BADI or user exist where I can check the returned value and raise the message?
Thanks,
Tomer

Purchase order enhancement is not effective

Hi Expert,
   I have a requirement about the purchase order. The requirement is that we must maintain the field collective no under the document header level. If there is no value exist , I can't print out the purchase order for the signature.
I have looked for the enhancement MM06E005, but it's not effective. I have looked for the enhancement MM06E005, but it's not effective. Which method is fit for my requirement, badi or enhancement? If using the badi, please tell me the badi name and its relevant method.
   Thanks.
George shi

Hello
There are badis related to PO
ME_ACTV_CANCEL_PO    BAdI for Activating the Cancel Function at Header Level
ME_BAPI_PR_CHANGE_01 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Chan
ME_BAPI_PR_CHANGE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Chan
ME_BAPI_PR_CREATE_01 BAdI: Enjoy BAPIs for Purchase Requisitions
ME_BAPI_PR_CREATE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Crea
ME_BSART_DET         Change document type for automatically generated POs
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standa
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CHDOC_ACTIVE      Activation of Further Change Document Updates
ME_CHECK_ALL_ITEMS   Run Through Items Again in the Event of Changes in EKKO
ME_CHECK_SOURCES     Additional Checks in Source Determination/Checking
ME_CIN_LEINRF2R      BADI for CIN India - Delivery charges
ME_CIN_LEINRF2V      BADI for LEINRF03 excise_invoice_details
ME_CIN_MM06EFKO      Copy PO data for use by Country version India
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_DEFINE_CALCTYPE   Control of Pricing Type: Additional Fields
ME_GUI_PO_CUST       Customer's Own Screens in Enjoy Purchase Order
ME_HOLD_PO           Hold Enjoy Purchase Orders: Activation/Deactivation
ME_OUTBOUND_SAVED    Outbound message saved
ME_PO_SC_SRV         BAdI: Service Tab Page for Subcontracting
ME_PROCESS_COMP      Processing of Component Default Data at Time of GR: Cust
ME_PROCESS_PO_CUST   Enhancements for Processing Enjoy Purchase Order: Custom
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PURCHDOC_POSTED   Purchasing Document Posted
ME_REQ_APPROVAL      Control of Buyer Approval After Changes to PReq Item
ME_REQ_HEADER_TEXT   Copy Header Text: Enjoy Purchase Requisition
ME_REQ_NEW_VERSION   Trigger new purchase requisition version
ME_REQ_OI_EXT        Commitment Update in the Case of External Requisitions
ME_REQ_POSTED        Purchase Requisition Posted
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_TRIGGER_ATP       Triggers New ATP for Changes in EKKO, EKPO, EKPV
MEREP_RSLTHNDL2      SAP Mobile: BAdI definition for Result Handling
MEREP_RUNTM_LD2      SAP Mobile: BAdI definition for Runtime Loader
MESSAGES_RFW         Badi for error handling RFW
METH_FOBU_CONNECTOR Appl. Specific Functions for Formula Builder Method Impl
METH_FOEV_CONNECTOR Appl. Spec. Functions for FB Method Implementations
Thanks
Anirudh Saini

Recovery not effective...

Similar Messages

Maybe you are looking for