Recovery of PSE 5 catalogs following disk replacement

I have had to have our hard disk replaced.
Unfortunately we had a number of catalogs that had not been backed up. (No comments please)
I have recreated the file structure and therefore put all the pictures back in the correct place.
I appear to have 2 relevant catalog directories being
.............Adobe\Catalog Folders\My Catalog
.............Adobe\Catalogs
Having reloaded PSE 5, do I copy the old psa files to the relevant location (i.e. where the default My Catalog file is)?
(This is in Adobe\Catalogs)
Or do I have to recover the contents of both these directories?
Thanks for any help

dj_paige
Thanks.
All is now working.

Similar Messages

Recovery Manager Asking for 5 Disks! HP G56-118CA

Hi. Hopefully someone can help me.
To replace a corrupted HD, I did the following:
1) I created the factory installed Win 7 resore disks (4 in total).
2) Wiped my drives (not formatted, but wiped) for disposal security.
3) Replaced old HD with new HD of same capacity.
4) Started restore process. After formating +/- 82%, the Recovery Manager ejected disk #4 and asked for disk #5.
I don't have a disk number #5 ! What has happened and how can I fix this?
(After reading the boards, I checked out the ordering disks from HP option for my model. The recovery disk set is also 4 disks.)
Thanks very much for your advice and help!
This question was solved.
View Solution.

I understand that you only had four recovery disks created from the system, but the recovery asks for a fifth disk.
Is it asking for disk 5 or a supplemental disk? In any case, the disks you made are not working and there is no way to alter the files that are actually on that disk to change what it asks for at the end of the disk.
I suspect the best option would be to contact HP to have a set of factory recovery disks sent to you. These disks would be made for this system specifically and should work without any issue. Granted, the system made disks should work as well but some issues with them can arise. In some cases where the user created disks are not working, you may get them sent at no additional cost. I will note that I cannot guarantee they will be at no additional cost. In the U.S., they typically run $15-$20 USD.
HP can be contacted at 1-800-474-6836 in the U.S. and Canada.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Recovery of data after ASM Disk fails

OS : Sun Solaris
DB: 10.2.0.3 RAC (2 Nodes)
Are there any steps to be followed for recovery of data after ASM Disk fails?
We are using a 2 Node RAC with ASM normal redundancy. Say if one disk of a diskgroup fails, then what steps we need to follow to make sure that Database is aware of the new disk ?

you said you are using NOrmal Redundancy, which is 2 way mirroring. So with that said, your data should be fine as one only disk has failed and got mirrored. So once you replace to disk, oracle should pick that up and move to data back into it....BUT NOT QUIET SURE, just an opinion.

Time Machine error message while restoring..."an error occurred while adding a recovery system to the destination disk

I had to change my hard drive in my MBP 15". I use Time Machine on a Time Capsule for backup. I am booting up my laptop with a bootable USB key. I have partitioned my new hard drive (bigger than the old one) and named it Macintosh HD (same as the old one). I select the option to restore from Time Machine Backup. I select one of my latest backup....select my destination drive...the restore process starts but stop within minutes with the following message. "An error occurred while adding a recovery system to the destination disk" It then prompts me to restart....
I need your help...what can it be.
Thanks

I've encountered this issue when the Time Machine was encrypted with FileVault.
Article: HT4718
Additional Information
Please note that OS X Recovery must be present on the computer's startup volume in order to use FileVault 2. Using RAID partitions or a non-standard Boot Camp partition on the startup disk may prevent OS X from installing a local Recovery system. See "OS X: Some features of Mac OS X are not supported for the disk (volume name)" for more information.
What seems to work, is reinstalling the OSX from the internet, and then using migration assistant to pull the user from the time machine backup external when logged into a temporary administrator user to move the original user back over.
Perhaps if you're stubborn, what would work is the following from the same article:
What to do if the installer warns that no Recovery System can be created
Some disk partition configurations may result in the OS X installer reporting that it could not create a Recovery System. In these situations, even if you are permitted to continue the install, you may want to quit the installation and create an external, bootable OS X hard drive with a Recovery System, first. You can continue your OS X upgrade on your computer's startup drive after creating an external Recovery System.
Your storage device must have at least 13 GB available (after formatting) to install OS X Lion or later and a Recovery partition.
These steps erase and reformat the storage device. This article instructs you on setting up a storage device to use the GUID partition scheme and the Mac OS Extended (Journaled) format, which are required to install OS X and a Recovery partition on your external storage device. You should back up any important files that are on the device to a different drive.
This procedure installs a version of OS X that is compatible with the Mac it was created with. Using this OS X system with a different Mac model may produce unpredictable results.
Your computer's serial number is sent to Apple as part of this process to help authenticate your request to download and install OS X Lion.
All of this information was collected by browsing through the public articles on the Apple Support website.

How do I restore my 27" mid-2011 iMac EXACTLY the way it was after hard disk replacement?

Hi all.
Recently received an email from Apple saying that the 1TB Seagate hard drive in my 27" mid-2011 iMac is apt to fail anytime. Apparently they used some bad hard drives in the mid-2011 27" iMacs which are problematic so they're offering me a free replacement to a brand new hard drive. I'll be sending in my iMac for the replacement sometime in the next few days.
In preparation for it, I've backed up my entire system using Time Machine into an external harddrive. The backup is up to date & includes all system files. I've also made a Lion install disk on an 8GB USB flash/pen drive using Carbon Copy Cloner.
My question is: When I get my iMac back after the hard disk replacement, will I be able to restore my iMac to EXACTLY the way it was before the replacement using the Time Machine backup & the Lion install disk that I've prepared? When I mean EXACTLY, I do mean EXACTLY, e.g I don't have to re-install all the programs I have, my settings for the programs I have will stay intact, everything is where it should be etc...i.e EXACTLY the way my iMac is right now.
If yes, how do I do it? I've read Pondini's guide: http://pondini.org/TM/14.html
However it is less than clear on certain points, e.g in my case, which one do I have to use to restore my system to the way it was...the Time Machine backups I have on the external HDD or the Lion install disk that I made using Carbon Copy Cloner? And how do I go about doing the restore?
I'd appreciate any & all help given. Thanks in advance!

daniirwan wrote:
baltwo: Thanks for your input! I didn't think of wiping the old HDD before sending it in for the replacement..all those sensitive user data! One question: What's a FWHD?
Already answered. Just note that FW is much faster than USB. See http://help.bombich.com/kb/troubleshooting/how-long-should-the-clone-or-backup-t ake for details.
I already have CCC installed so I'll probably try it out. Are the steps outline here the one that I should do to restore the CCC clone when I get my Mac with the new HDD back? See: http://help.bombich.com/kb/overview/restoring-data-from-your-backup#full_volume_ restore
Yes.
Another question: while I'm booted on the backup/clone, and just after I've wiped the old HDD, how do I reinstall the OS to create a generic user account? Will I have to use a Lion install USB disk?
No. IIRC (if I remember correctly), you can either use a saved Lion installer (hopefully it exists on your backup/clone) or use the Recovery HD. If you have the USB stick w/Lion installer on it, use that.

Hard Disk Replacement for Toshiba Portege R500-S5006X

I have a Toshiba Portege R500-S5006X which is out of warranty. I would like to replace the hard disk. What hard disk should I purchase? What is the maximum capacity (size in GB), maximum RPM speed and size in inches I can use in this laptop? Will a SATA-2 hard disk work in this laptop? Any other information I need to know about the hard disk replacment? I would be happy to get an answer from an official Toshiba technician.
Thanks,
dandanl

I don't know if the Toshiba people who post here are technicians, I suspect not, so you might be waiting for a while if that's the only person you would accept information from...
At any rate, the standard drive in that computer looks like it is a SATA 2.5" 9.5mm thick.
The following is a spec page for one of the stock drive options (they used a couple different drives, but pretty much equivalent)
http://storage.toshiba.com/storagesolutions/archived-models/MK1646GSX
As far as something of a larger capacity working, it should be fine, just keep in mind that a physically larger drive might not fit, so keep the height to 9.5mm

Moving my photos and PSE catalog to a new machine... and upgrading

H
I am seeking advice on the best way to do the following:
- move my photos from my current laptop to a new laptop
- recreate my current PSE catalog on the new machine
- do both of the above while also upgrading to PSE 11 on the new machine.
The last time I did this sort of action -- moved my photos to a new machine -- it was sheer bedlum. Hoping to avoid the pain this time.
Do I first need to move my photos to the new laptop -- recreating the exact smae file structure that I have today -- amd them export and import the PSE catalog? I want to repeserve the album structure and tagging that I have created.....
Any help/pointers appreciated.

The recommended way to move to another computer with a new OS or PSE version is to use the built-in backup and restore function in PSE.
- Start with a clean catalog : reconnect missing files, repair, optimize. That's good practice even if it is not strictly necessary.
- Do a full backup on an external media (external USB drives are safe and affordable). If you have several catalogs, do as many backups. Warning ! each separate backup must be in its own separate folder.
- Now, you have installed your PSE version (possibly a newer version) on the new computer, you can do a restore from each catalog backup. That will restore the catalog and the picture files ; if you have checked the option to keep the folder tree structure, it will be kept.
The smart thing about this process is that not only everything is restored, but if you have upgraded to a newer PSE version, the catalog will be automatically converted to the newer version ; furthermore, you have a backup!
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Move_your_photos_1
http://helpx.adobe.com/photoshop-elements/kb/common-catalog-issues-upgrade-elements.html
Edit:
This shows why a backup from the organizer is often a better solution than external backup solutions. Suppose your old computer crashes, you can restore to a new computer and newer PSE version easily. It's also a good way to update a secondary computer (a laptop for instance) to the same 'sync' than the master computer.

What is the best hard disk replacement for my notebook?

Hi, what hard disk replacement should i buy for my notebook HP G62-a016sl, considering the price/quality ratio? I would not want to spend more than 60 euros/dollars.
(if you want to know why i need it, see this post: http://h30434.www3.hp.com/t5/Notebook-Recovery/Creating-and-using-a-Factory-Recovery-Disk-of-a-simil...
I'd would like to know an expert opinion. Thanks!)
This question was solved.
View Solution.

I finally got the second hard disk you recommended and i can confirm that the problem of the jerkily computer was the hard disk (almost failed) and not software. Thank you very much!

RE: Apple iMac 27 Hard Disk Replacement Complaint

Dear Customer ServiceManager,
RE: Apple iMac 27” Hard Disk Replacement Complaint
On May 12, 2011, Ibought an iMac 27” for my daughter from your official Hong Kong website (www.apple.com/hk).
I am writing tocomplain about my dissatisfaction of your poorproduct quality, irresponsibleattitude of your customer service, and most importantly my painful experience with your Apple Careservice. I am also very disappointed with how your Apple Care staff made a discriminating comment about your low income Hong Kong customers.
On July 28, 2011, mydaughter received an email from your company ([email protected]) informing her that the hard disk of her newly purchased iMac wasdefective due to factory error. You promised to replace the defective hard disk with a brand new onefree of charge, but when she asked your HK Apple technical support if therewould be on-site replacement service, your staff told her that she can onlyeither carry the 30-pound iMac herself to their service center or pay HKD1200for the Apple Care which offers the on-site replacement service.
First of all, I foundyour request very unreasonable. Mydaughter was not the one who broke the hard disk, your company informed herthat you gave her a defective one. So why is the responsibility and the cost of taking the iMac for repairshould be borne by her, as an innocent customer, who paid HKD18, 000 for aniMac directly ordered from your official website? She did nothing wrong but your company required her to barethe cost of transporting a 30-pound iMac and the risk of causing damage on theway.
Secondly, I believeyour company has deceitfully forced my daughter to buy your Apple Care, whichis completely against her original will. Since she is just a 22-year-old girl, it is impossible for her to carrythe 30-pound iMac by herself. Andclearly, she was not given a choice but had to pay HKD1200 for the AppleCare. This made me doubt if thisis a scam of your company. Is thisa way of how Apple make extra money by giving your customer faulty products anda mission impossible, then forcing us to pay for a service that we did notneed?
Anyway, thepainfulness of enjoying your Apple Care service has just started…
On Aug 10, 20111:30pm, your service man came to change her hard disk with just a look as ifthe process was very ‘efficient’ and left after half an hour, even her Mac OShas not yet been completely installed. After he left, my daughter found that the OS could not be installed, soshe called your service center immediately and under her strong request, he hadto come back on the same day and check the new hard disk. He found it proved to be a defectiveone again. I was shockinglysurprised that your company, which always claims to produce products of highquality, selling at an expensive price, replaced my claim-to-be defective harddisk with a defective one again. Iwonder how Apple’s quality control is done? Your company didn’t even bother to check if the new harddisk is working before replacing it for customers.
My daughter requestedfor a new one, but then your service center said they had no new stock andasked her to wait until further notice. But without any definite date, it means my daughter’s brand new computercannot be used for… I don’t know how long. Please notice that I paid HKD18,000 to buy a first-classproduct of high quality, as claimed by your company all over the world.
So my daughter had tocall your service center again and forced them to return her original harddisk. Till 5:00 pm on the sameday, another technician came to reinstall her original hard disk into hercomputer. Surprisingly, all thedata in her original hard disk was still there, which means there is a riskthat all her personal data and information had been accessed by your servicecenter staff.
As a father, I had totake over the matter from my daughter and called your hotline 2112 0099 at5:00pm on Aug 10, 2011. After 30minutes, I could finally talk to one of your technical support staff for 10minutes about my complaint. Heasked me to hold the line and wait for him to transfer my call to his seniortechnical support colleague, so I kept on waiting for 15 minutes, but finallythe line was being cut and no body contacted me and my daughter again.
I had to call yourhotline again at 6:00 pm and waited for another 15 minutes to reach one of youradvisors. He passed my line toyour senior technical support advisor located in Singapore. He said he is just a technical supportadvisor, so he could not take my complaint directly. He needed to talk to meagain on the next day with a customer service advisor. He promised if he could not reach me onmy mobile phone, he would leave his direct line for me so that I would not haveto waste another half an hour to reach him through the hotline.
On Aug 11, 2011 5:28pm, I received a voice mail from your senior technical support advisor asking me to call him back but he didn’t leave any direct telephonenumber as he promised. So I triedto call back the caller ID, which was shown on my phone. However, the auto reply of this numberwas, “This is an invalid number”. I asked the Hong Kong Telephone Company to help me to call but even theycould not reach this number. Theytold me this number was from Shanghai, China. So I had no choice but to call your hotline again. After 25 minutes, one of your advisorstook my call and I had to repeat my story to him again in order to have him putme through to talk to your senior staff 42058 again. I asked him why he didn’t leave his direct number for me tocall him back as he promised. Hesaid he forgot! What a surprisinganswer to leave your customer nothing but a number that he knew clearlycouldn’t be reached.
By that time, I havewasted nearly 45 minutes to reach him, and it was already 6:20pm and thecustomer service advisor was off work. Therefore, I made an appointment with him again and we agreed that hewould call me between 9:31-10:00am on Aug 12, 2011 morning. I took half day-off from my work towait for your senior staff to call me.
Unfortunately, Iwaited until 10:10 am and nobody contacted me again (I left both my mobilenumber and email to them).
Finally, I called the hotline again and waited for 15 minutes, an advisor put me to your on-dutyCustomer Service Manager, Ken. After I told him my name, he realized that he should be theone responsible for calling me this morning, but since he had a meeting thatmorning, he forgot to call me again! The Apple staff didn’t keep their promises after all which disappointedme a lot. It seems to me thatApple is unwilling to accept negative feedbacks from customers.
Ken told me thatthere was nothing he could do.
At the end, I wasreferred to a Customer Relations staff, Ms. Wing Liu. Her response was also there is nothing she can do exceptgiving me a case number of my complaint. Since then, I never get any response from Apple regarding my case.
I believe Apple has afull record of all my conversations with your staff and thus, should be able tolook into my case thoroughly. Isincerely hope that Apple can take my feedback seriously and respond to my complaintin a responsible manner, but not just trying to suppress your customers, whohave already been treated unfairly, from claiming their rights. Otherwise, it is really a shamefor Apple to claim itself delivering high quality products and services allover the world.
Yours truly,
Tommy Fong
Apple Customer
<Personal Information Edited by Host>

I just realize Apple might have blocked my daughter's Apple ID from posting in your discussion forum.
My daughter was trying to go to this Community Page by logging into her account. But your Communities webpage displays a "We'll be back soon" webpage. Then I try to login with my Apple account and it works fine.
<Email Edited by Host>

Can not find recovery manager and have no disks to even start.

Ever since I got my laptop fixed I have been having a lot of problems My system was windows 7 and is now windows 8.
First it will not let me complete an update and on the screen it says it is reverting files.
Second when I first start up my computor it will not start up it does not do anything I even waited 1 hour today to see
if it would. and it still did not I turned it off and restarted it to get it to come on. I also even waited almost three hours to try and install updates, and the same error message that I talked about earlier appears, but before that message it had a message saying that it would be two days to complete the install the updates is this even right.
The last thing that I tryed to do well I watched on you tube how to do a system recovery, but I need the disks that I do not have so after watching the video I was very disapointed to find out that I do not even have a recovery manager so this computer is just giving me a whole bunch of problems, and I would hate to send it back yet again, because of this.
I am looking for another job right now and want to get busy and get my resume together and job applications together, because in about 4 days I go back to work and the job that I have now I do not get much time to do anything. So please help and I would like to do it all on line if posible. Thank you.

You have contradictions here.
The specs indicate that the computer came with Windows 8 installed, did you downgrade to Windows 7. If you did the recovery partition is certainly gone. Now you say you have Windows 8, how did you get it installed.
What update are you talking about, is it just one or many?
You say, " and the same error message that I talked about earlier appears, but before that message it had a message saying that it would be two days to complete the install the updates is this even right." Where did you get that message from, no way will it take two days to install an update.
If you desire recovery disks and If you live in the USA/Canada, call HP at this number 1-800-334-5144, and see if you can still get a set of recovery disks.
Otherwise http://welcome.hp.com/country/w1/en/support.html
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

How to restore after disk replacement?

l just had my iMac hard disk replaced due a recall. Before taking it in I made a disk image with disk Utility and securely erased the disk. I also have Time Machine back-ups going back several months. On getting the machine back, since it contains sensitive data securely erased the new hard disk and started up with the Snow Leopard boot disk. When I tried to scan the disk for reinstall I get an error "Unable to scan 'image name' (internal error)". I tried several times with the same result. I then tried to restore from Time Machine and got a message that No Mac OS X backups were found."
I installed Snow Leopard and again tried both approaches with the same result. I can see to Time Machine backups on the disk but when I restore it simply copies the files into "/Volumes. Anyone have ideas on how to restore the system?

Rodocki wrote:
The disk image did not. Not sure what's wrong with the disk image burn and restore process but it is clearly not dependable.
Unless you tested and restored it after making it, it's a poor choice, since it requires three volumes: the boot volume, source volume, and a destination volume. A bootable backup/clone made with Carbon Copy Cloner or SuperDuper! is a much better choice. BTW, it's also significantly faster to restore one of these than it is to restore a disk image.

Restoring my computer after hard disk replacement

My iMac hard disks were corrupt and new hard disks were installed today. I now need to restore my computer. The computer is currently going through the process of installing OSX mountain Lion 10.8 and I have a Time machine backup that I want to then import from my time capsule.
My time capsule has the back up from my old hard disks which operated on the latest version of OSX 10.9 Mavericks. Should I upgrade the iMac to 10.9 mavericks before using migration assistant it import the time machine backup, or will it be okay to simply start the migration assistant from within 10.8?
I am pretty confused and nervous - the apple support phone service told me to simply restore the time machine backup from disk utility, but this failed and I subsequently read that this was wrong advice as the backup was from a different computer(ie my old hard disks). I am now desperate to get my computer back working again after a nightmare few weeks of logic board replacement and now hard disk replacement.
Any advice would be appreciated.

It would not be a good idea to restore from the time machine backup, because if your HD was corrupted before it was replaced, then the backups are probably corrupted too. If you try to restore by migrating from that backup, you'll just put corrupted files on your new HD.
The best thing to do would be to:
finish the ML installation
download the Mavericks installer and install Mavericks.
figure out what document files you want to save that are on your TM backup, and copy them to your new HD (not by migration).
reformat (erase) the TM hard drive
reinstall your apps from scratch
once you have everything up and running, then make a new TM backup.
I installed a new HD in my Macbook Pro last year, and I did a clean install like this. It does take a bit more effort but it's worth it. Seems to work better, faster, cleaner, without any problems.
How did your Mac get "corrupted"? This is often due to bad/old/incompatible software, particularly junk like MacKeeper or CleanMyMac, or other worthless, overpriced, completely unnecessary "cleaning" or "maintenance" or "optimizing" applications garbage. If you have anything like this on your Mac, don't even think about reinstalling it.
One thing that I found useful after a few "clean installs" with my Macs was to make a list first of everything that you want to reinstall on your mac, including passwords, essential apps, printer drivers, documents, and the like. Once you start doing the reinstalls it can get confusing so having a list first can keep you on track.

It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

My hard drive continually has the floating beach ball and will take massive time to fulfill a request. And then will not boot up...so then I have to do a restore and rebuild hard drive from a past saved time machine version. Works for a little bit...then the floating beachball comes more and more...until it will not boot up again. So then I restore from a previous time machine saved version....and again it works for a day or so ... until it happens again. Now it's happening faster and faster...so I think my hard drive is dying.

Is there any way that I can get back my iPhoto? After having hard disk replaced (no backup) and the operating system has been updated to Lion (no disc) I am wondering if iPhoto can be reinstalled with my Leopard discs?

Is there any way that I can get back my iPhoto? After having hard disk replaced (no backup) and the operating system has been updated to Lion (no disc) I am wondering if iPhoto can be reinstalled with my Leopard discs?

As Niel pointed out, yes. The disk probably will look like the MBP disk (4) in this screenshot;
OT

Searching for duplicates in PSE catalog?

I am experiencing numerous duplicate photo images in my PSE catalog. I woud like to do a search of the catalog and bulk remove the duplicates. Is there a way to do this?

See that faq by John R Ellis:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Find_and_delete
That works with PSE6.
Once you have selected a number of files, you can either:
- right click, choose stack and automatically suggest photo stacks
- or the find menu, 'by visual similarity'

Recovery of PSE 5 catalogs following disk replacement

Similar Messages

Maybe you are looking for