Recovery Order in Error with: AiaResubmissionUtility or EM Console?

I am using AIA 11g and I know that the AiaResubmissionUtility works on the message in the queue and EM Console with the instance committed on the database but I do not know what can be the best practice to recovery the message.
I would like to know if in this version I can perform the recovery of messages thought the AiaResubmissionUtility or with the EM console.

In AIA methodology, the message should always be resubmitted from the start of the milestone i.e. queue/topic/resequencer. Also the message will be rolled back to the start of milestone in case of any error with in the flow between two milestones. You should go with re-submission utility.
Hope this helps.

Similar Messages

  • PM Order settlemet error with recive account

    Hi
    When im going to settle the PM Order to AUC ( Asset under construction ) it gives following error pls advice how to solve this issue. 
    Your quick response highly appreciated!!
    Regards
    Kesh

    hi madhu..
       whenever you raise any issue pl give details otherwise it is very difficult to identify the problem.. I think in your case in PM order there is problem in settlement rule because during settlement of order one cost object is required where cost to be settled, ie a receiver cost object. pl check.
    kkumar

  • Odd Error with decode function in Order By Clause

    I am trying to compile a procedure and can't get around an error with a dynamic order by that doesn't make much sense to me. I can repoduce the error with a plain select statment in sql plus so I can rule out a declaration error. Here is an example with 2 numeric columns and a date column.
    select task_id, display_date, remark_id from task_list
    where task_id > 1000
    order by decode('Task_ID', 'Task_ID',Task_ID, 'Display_Date', Display_Date, 'Remark_ID',Remark_ID)
    returns the error:
    select task_id, display_date, remark_id from task_list
    ERROR at line 1:
    ORA-00932: inconsistent datatypes: expected NUMBER got DATE
    I'm not sure why this error is occuring, because it doesn't even hit the Display_Date field in the Decode statment. If I take the Display_date out of the statement, it runs properly. If I change Display_Date to To_Char(Display_Date) it also runs fine, but the sorting is incorrect. Also I'm running 9.2, and do not want to use dynamic sql to build my query. Any Ideas out there as to the cause of this error?

    I did find a workaround to this issue by breaking the decode statment into three separate statement, but I still think that the way it is written above should work, and may be a bug, or an error that I don't understand fully.
    The Order by was rewritten like this:
    order by decode(pSort, 'Task_ID',Task_ID), decode(pSort, 'Display_Date', Display_Date),
    decode(pSort, 'Remark_ID',Remark_ID);
    Thanks

  • When i got my new iphone 4, its in recovery mode. while restroing with itunes, im getting error at restoring firmware stage? what could be the reason? pls help me for solution.

    when i got my new iphone 4, its in recovery mode. while restroing with itunes, im getting error at restoring firmware stage? what could be the reason? pls help me for solution.

    You got a new iPhone 4, and out of the box the phone is in recovery mode? If that's the case, return it.
    If you don't want to do that. what error code are you getting?

  • Errors with recovery disk: no wifi

    I used the recovery disk; factory settings reboot.... And this happens. It only connects directly to the Internet; no wifi at all. And it won't do windows updates. Now I get this message. I am not sure what I need to do to fix this.
    You can see in the photos, there are errors with the Toshiba Modem and the Wifi 5100
    Toshiba sent me A300 series revovery disk for Vista Home Premium 64-bit; is that the correct one for A305 S6916 PSAGCU ?
    Solved!
    Go to Solution.
    Attachments:
    1.JPG ‏121 KB
    4.JPG ‏51 KB

    No need to put this everywhere!
    Keep it in the thread with my reply.
    -Jerry

  • Download does not start, error with order

    i've been trying to dowload lightroom 4 for more than a week. the download does not start and when i try to buy the program i get a "error with your order message" any idea what i should try next??

    MichaelAShea which web browser are you using?  Please try a different web browser.  If you continue to face difficulties then I would recommend installing via the Creative Cloud Desktop application.  You can find more details at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • I tried updating my iphone 4s to the ios 7 but it said error with the firmware now my phone is stuck in recovery mode and i have no idea how to fix it any suggestions??

    i tried updating my iphone 4s to the ios 7 but it said error with the firmware now my phone is stuck in recovery mode and i have no idea how to fix it any suggestions??

    Try Restoring it 3 times in a row and see if that works.
    If not that error can indicate one of two things: Your iPhone was at one time jailbroken, had the iOS version rolled back, or ran an unauthorized beta and if none of those things are true it is a hardware error.

  • I upgraded to yosemite and iOS 8 in order to record with quicktime. But when I select Record a new movies I immediately get an Operation Could not be completed error.

    I upgraded to yosemite and iOS 8 in order to record with quicktime. But when I select Record a new movies I immediately get an Operation Could not be completed error. When I choose record audio or screenshots, I get a little further, but as soon as I select my ipad as the source I get the same error message.

    You don't need to be a developer for this to work. I get the same error. Just one more thing on the list that make me upset more and more with Apple. Things just don't work out of the box like they used to.
    This new feature was to be included with iOS 8 and Yosemite.

  • I was downloading the software update for ipod touch 2gen and after it was done downloading it showed that there was an error with my ipod and when i saw it was on the lockscreen loading. its been like this for 4 hours already

    I was downloading the software update for ipod touch 2gen and after it was done downloading it showed that there was an error with my ipod and when i saw it was on the lockscreen loading. its been like this for 4 hours already

    What did the error message say?
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • XML Publisher Error with reports published in XML publisher

    Hi All,
    I am geting the following error with a report published using XML Publisher
    The XML page cannot be displayed
    Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
    The system cannot locate the resource specified. Error processing resource 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.d...
    How can i Rectify this?

    Hi Ark,
    In order to generate a report using xml publisher. we need the following.
    1. XML Data
    2. Template file (RTF/PDF/..)
    XML data will not be created by the template file.
    We will be required to create XML data. One of the easiest way to create xml output is using the RDF. We can change the rdf output type in the concurrent program to XML.
    Once the xml and the template is available, "XML Report Publisher" will be able to generate the output in the required format.
    Thanks,
    K.Nataraja Suthan,

  • Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on X61/X61s

    Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD.
    This information can help address blue screen errors specifically
    related to Turbo Memory, but may not solve errors related to other
    issues. Please read through the instructions completely, make sure they
    apply to your system, and after attempting the solutions please post
    back with your feedback for the community.
    Some users may experience random blue screen errors with ThinkPad
    systems running Windows Vista with Intel Turbo Memory hardware. These
    blue screens may occur during normal usage on the system or they may
    occur when booting into Windows Vista. Blue screens related to the
    Intel Turbo Memory hardware may reference a stop code of 8086 with
    memory address locations of {0, 0, 0, 0}.
    There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
    Step 1: Update Intel Turbo Memory Driver
    If the driver version is before version 1.0.1.1004-7.0.3.1001, please
    update to this version.
    To determine what version of the Intel Turbo Memory driver is installed:
    1.    Click Start, then click Control Panel.
    2.    Click System and Maintenance.
    3.    Click System.
    4.    Click Device Manager.
    5.    Expand the Storage controllers category.
    6.    Double-click Intel Flash Cache Logic Chip.
    7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
    The new driver and installation instructions can be found here.
    Note: The Intel Matrix Storage Driver is updated with this package.
    Step 2: BIOS version
    If your BIOS version is older than those listed below, please update to the version listed.
    How to check your BIOS version:
    Turn off the system.
    Turn on the system.
    While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
    The
    BIOS Setup Utility menu will be displayed. If you have set a supervisor
    password, the BIOS Setup Utility menu appears after you enter the
    password.
    Check BIOS Version and Embedded Controller Version.
    Turn off the system.
    System BIOS versions:
    ThinkPad X61 or X61s - BIOS version 1.06 (7NET25WW)
    Please
    remember that these updates do not solve every possible system blue
    screen, but they do resolve several problems related to the Intel Turbo
    Memory driver.
    Tim Supples
    Lenovo Social Media
    Got a question? Don't PM me, post it on the forum!
    Lenovo Blogs
    X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

    Dear Tim,
    First off, many thanks for the tips for resolving BSOD with Vista + Turbo Memory on X61.  I've been suffering from this BSOD for countless times since I bought in my X61 7673-CW9 in April 2008.
    Even prior to having the pleasure to visit this wonderful forum, I followed both steps as indicated, and updated my Intel Turbo Memory driver to 1.5.0.1013 and my BIOS to 7NETB4WW (2.14).  However, the BSOD recurrs.
    For the past two months, I've recovered my system to factory default settings using Rescue and Recovery for over twenty times, each time with the latest Intel Turbo Memory driver and BIOS.  Notwithstanding that, BSOD recurrs.
    During these painful experiences, I tried two options: 1) making my X61 up-to-date by using System Update and Windows Update (including Vista SP1 or excluding Vista SP1); 2) keeping my X61 the status as factory default (i.e. without updating through either System Update or Windows Update (the automatic/scheduled update function of both is turned off)).  In either case, BSOD recurrs.
    I'm 100% positive that the BSOD does not arise from any hardware or software/firmware I install.  I never install any hardware (e.g. RAM).  And, it is not caused by any software/firmware I install: the clear and unequivocal evidence is that at one time,I encountered BSOD while having restored back to factory setting and booting for the first time.
    I live in Taiwan, and I seldom heard this BSOD here.  All of my friends (as most of Taiwan residents) using X61 operate in Traditional Chinese environment, whereas I operate in English environment.  In Taiwan, when booting for the first time after purchase/recovery, the Windows Vista Business system provides for lanuage choice (Traditional Chinese or English), and, once chosen, the language cannot be altered later on (unless, of course, the system is restored back to factory default settings).
    My system specs are the same as the day I purchased it and are listed below (as I'm not sure if my machine type X61 7673-CW9 is applicable outside Taiwan):
    Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz
    Memory: 1.00 G.B.
    System: Windows Vista Business (32-bit)
    Hard Drive: 160 G.B. @ 7,200 r.p.m.
    And, of course, with Intel Turbo Memory 1 G.B.
    I contacted the Lenovo support staff here in Taiwan for countless times, but they seem to be clueless.  I learned that some friends at this forum downgraded their OS back to Windows XP, but I chose not to.  The reason is simple: my purchase price for X61 7673-CW9 includes the Intel Turbo Memory, which cannot function under Windows XP (at least so far).
    Therefore, I just wish to share my experience here and perhaps I can get some advice from you and other friends here.  Any advice will be tremendously and enormously appreciated.
    Kevin Chen @ Taiwan

  • After disk recovery, restoration incomplete error - error during PININST_BBV - and can't access BIOS

    Hi I haad got :Ultrabook HP ENVY 6-1103el
    I performed a disk recovery (with disks made myself) to wipe the hard drive. Got to disk 4 of 4 when HP Recovery Manager window appeared with following error message when I click the Details button:
    ctoerror.flg file
    [21:12:12.07] ChkErrBB.CMD :  Detect some error during PININST_BBV.
    [21:12:12.07] ChkErrBB.CMD :  Check c:\system.sav\logs\BurnBootWarn.log
    [21:12:12.07] ChkErrBB.CMD :  or, check c:\system.sav\logs\BurnBootMerge.log
    [21:12:12.08] ----------------------------------------
    [21:12:12.08] Critical error condition was detected at BBV1...
    [21:12:12.08]
    [21:12:12.08] Refer the following file if exists.
    [21:12:12.08]   - c:\system.sav\Logs\BurnBootWarn.log
    [21:12:12.08]   - c:\system.sav\Logs\BurnBoot.log
    [21:12:12.08]
    [21:12:12.08] Switch to 2ndCap's WinPE and show [Recovery Manager]'s Incomplete dialog.
    [21:12:12.08] because RM's dialog can't appear on [Start] screen on Win8 environment.
    [21:12:12.08] customer may not notice RM already shows Error dialog.
    [21:12:12.08]
    [21:12:12.08] ----------------------------------------
    there might be unexpected reboot during BBV Clean or Last...
    The process will cause CTO panic because the image might not be normal...
    There are 3 options, Save Log, Details, Retry. When I try 'Retry' it asks for recovery media. I've put my recovery disk 6 and disk 1 in, but nothing happens. Oddly enough, the command prompt (cmd.exe) is open at this point. Now whenever I restart the laptop it goes to the same restoration error screen with the command prompt open and minimized in the lower left hand corner.
    Pressing F10 (BIOS Setup) or F11 (System Recovery) after starting doesn't do anything, it just goes straight the the Restoration Incomplete message. Pressing Esc during start goes to the Startup menu, but pressing F10 or F11 there just does the same thing. F2 System Diagnostics works. I ran quick memory check, everything passed. I ran the long hard drive check. Overall it passed, and each one passed except for optimized dst it said 'not available'. When I choose BIOS Management from Diagnostics UEFI, and try either a BIOS Update or BIOS Rollback, I get 'The selected BIOS image was not available.' My system's BIOS ID is F.23. When I try to select a BIOS Image to apply, I've clicked through the file trees and there's nothing there to choose.
    I tried recovering the BIOS pressing Windows and b key when starting. The screen stayed blank and the caps lock light kept flashing but nothing happened. The screen just stayed blank and no bios update screen appeared.
    Did my BIOS become corrupted during the system restoration from disk?
    Any  suggestions or options?
    Thanks.

    Hi  larag,
    Thank you for your reply.
    As I stated in my original post, I suggest you contact HP support and explain in detail the events that happened, when you tried to do the recovery.  The contact information is in my original post.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Valuation with material cost estimate: error with product "117122"

    Hi people,
    We have the error:
    =====================
    Valuation with material cost estimate: error with product "117122"
    Diagnosis
    In Profitability Analysis (CO-PA), the system tried to valuate a line item using the current standard cost estimate.
    In order to determine the current plan period, the system needs to read the valuation segment of the material master.
    The system has found that the current plan period is not filled forproduct "117122" in plant "UBE1".
    We have the follow configuration in trans.: KE40:
    . Determine material cost estimate
       . Transf. Standard Cost Estimate
    . Costing Variant
    . Control Data for Standard Cost Estimate
       . Period Indicator = "Current Standard Cost Estimate acc. to entry in mat master
    . Addiitonal data CO-PC
        . Transfer cost estimate in controlling area currency  "activated"
    We think the reason about our error is because the field above is activated and some configuration more is necessary for this case. For examplo: Trans.: OKYW and this one was not configurated yet.
    Do you know what happend?
    If we need to configure some transation, or sonly process the cost estimate?
    Thanks,
    Rosana.

    Hello Guido
    Thank you very much for your return.
    It is happenning in a Client that some people are doing the configuration.
    Before we didin't have in KE40, the fiel "Transfer cost estimate in controlling area currency" activated.
    And now, the people activate that in this new Client and I don't know the impact about that.
    I think we have to make the configuration in OKYW.
    The other transation you told me, we don't have any information.
    Could you tell me some other idea what happend?
    Message error is just "Message no. KE350"
    Abou claculate the cost:
    It was calculated by trans.: CK11N for future planning and the real wasn't not possible to release because this material already have moviments.
    Could you tell us is there is some thing more to do?
    Thanks,
    Rosana.

  • R12.1.1 / 11.1.0.7 upgrade : Error with 10.1.3.4 patchset upgrade

    All,
    We are on 12.0.2 / 10.2.0.2 (non-rac) in a split-tier architecture. Web/Forms on the Linux node and Concurrent Managers/Database on the Solaris node. We are now on a project to upgrade this environment to 12.1.1 on 11.1.0.7 db. (Non RAC,Non ASM)
    Here are the high level tasks that i laid down
    -- Create a project instance (clone from Prod)
    -- Upgrade db to 10.2.0.4 from 10.2.0.2
    -- Upgrade the techstack Oracle Homes (10.1.2 and 10.1.3)
    -- Upgrade the JDK to 1.6.0_X
    -- Upgrade 12.0.2 to R12.1.1
    -- Upgrade the database to 11.1.0.7
    PS: Direct ugprade from 10.2.0.2 to 11.1.0.7 needs us to be on R12 RUP4. So, i decided to do 10g upgrade as an intermediate step. We are following 752619.1 and all the notes that it refers.
    We are hitting an issue upgrading the 10.1.3 Oracle home on the Solaris node. The same upgrade completed fine on the Linux node. Here is the description of the issue.
    The runInstaller for 10.1.3.4 patchset expects OPMN to be running for a successful patchset installation. On a node with just batch processing enabled, OPMN does not run by default. The installer tries to start OPMN and errors out saying
    ========
    OPMN is failing to start. OPMN must be started in order to correctly install and configure the patchset. Please start OPMN ma
    nually in order to continue with the patchset installation.
    =========
    This is when the installer is at 83%
    We tried to start OPMN and managed processes manually using adopmnctl.sh
    OPMN starts and is able to start the HTTP server too but not any of the OC4J container components (oacore,forms and oafm). Here are the errors
    ==========
    ias-instance id=afcprj_swafcdev1.swafcdev1.sherwin.com
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    default_group/oacore/default_group/
    Error
    --> Process (index=1,uid=1861636864,pid=17677)
    failed to start a managed process after the maximum retry limit
    Log:
    /swafc/applmgr/afcprj/inst/apps/afcprj_swafcdev1/logs/ora/10.1.3/opmn/default_gr
    oup~oacore~default_group~1
    ias-component/process-type/process-set:
    default_group/forms/default_group/
    =========
    The logfile that it points to does not have any errors. Looking into the other log files within $LOG_HOME/ora/*3/
    , we get the following error in oacorestd.err
    =========
    09/10/05 16:07:10 Error initializing server: Shared library "oracle.ws.jaxrpc" could not be found.
    09/10/05 16:07:15 Error: <connector name="OracleASjms" path="OracleASjms.rar" /> will not be bootstrapped since corresponding module declaration was not found in application.xml.
    09/10/05 16:07:17 Error initializing server: Shared library "oracle.ws.jaxrpc" could not be found.
    ========
    I saw some notes and tried updating the config xml files and removed the references to oracle.ws.jaxrpc but to no help.
    Installer log has the below error when we attempt the "retry" operation in installation screens.
    ========
    fileName = NonExistentFile
    searchString = NonExistentString
    Query Exception: FileNotFoundException
    Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
    Query Exception: FileNotFoundException
    Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
    ===========
    Any help on the above issue? We are never going to use OPMN on this node but stuck here currently !!
    Deviating a little bit, if we have to consider moving the concurrent managers out of database node to the
    web/forms node (just to avoid having to maintain 2 appl_tops and getting away with doing the above tasks 2 times)
    , what are the various things to consider?
    -- Network latency
    -- R12 being Unified APPL_TOP, can we just try to bring up ICM on Web/Forms node? (just enable the service)
    -- We are aware that we might have to move the custom top and test custom programs (especially host programs).
    Is there any other considerations when moving Concurrent managers from a Solaris node(64 bit) to Linux node (32 bit) ?
    One last question: Why are these adoacore/adoafm scripts taking a long time?
    Any feedback is highly appreciated.
    Thanks,
    Arun

    Hi,
    Error
    --> Process (index=1,uid=1861636864,pid=17677)
    failed to start a managed process after the maximum retry limit
    Log:
    /swafc/applmgr/afcprj/inst/apps/afcprj_swafcdev1/logs/ora/10.1.3/opmn/default_gr
    oup~oacore~default_group~1
    ias-component/process-type/process-set:
    default_group/forms/default_group/Please try the suggested solution in Note: 555214.1 and see if it helps.
    Query Exception: FileNotFoundException
    Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryExceptionCould you please verify that permissions are set correctly on the application tier node files?
    -- R12 being Unified APPL_TOP, can we just try to bring up ICM on Web/Forms node? (just enable the service)Please see (Note: 373611.1 - How to move Concurrent Processing Server from one node to another node) -- Step 3 to 7
    -- We are aware that we might have to move the custom top and test custom programs (especially host programs).
    Is there any other considerations when moving Concurrent managers from a Solaris node(64 bit) to Linux node (32 bit) ?I would suggest you relink all executable files via adadmin and check then.
    Regards,
    Hussein

  • Item text in Purchase Order getting updated with info. record Purchase Order Text

    Hello All,
    I am working in a roll out project and facing issue in text repeating twice for the line item in the Purchase Order for the new company code for which rollout is happening
    Issue:
    Item text in Purchase Order getting updated with info. record Purchase Order Text
    01) PO Text is maintained in the material master under "Purchase Order Text" tab
    02) The PO text that is maintained in material master is getting updated in the Purchase Info. Record
    03) When Purchase Order is created, the "Item Text" gets updated in the Purchase Order automatically only for the new company code for which rollout is happening. when printed, this results in the text getting duplicated twice
    03.1) this behavior is not observed in the Plants/ Company code that is already Live
    Configurations in the system:
    The copying rules for the "Texts for Purchase Orders" is
    Source Object = "Info Record", Source Text="Purchase Order Text", Fix="*"
    We have modified the Purchase Order form to print one of  the condition types maintained for calculating the tax. Other than this there is no change to the plants that are already live.
    I could not locate any "Purchase Organization" / "Company Code" / "Plant specific configuration.
    Am I missing any configuration or where can I look in what is causing this error.
    Request help from the experts in the forum.
    with Regards,
    Dhandapani R

    There is no company/purchasing/plant specific customizing for purchase order text.
    The customizing copying rules for the "Texts for Purchase Orders" affects all equally .
    If the text in the purchase order in ME23N is already filled different to other plants, then you either have a modification in place, or the texts are differently maintained in the referenced data (vendor, material, info record, contract)

Maybe you are looking for