Recovery partion has been removed...help!!!

i have a a pavilion dv6090 laptop and i noticed that its recovery partion has been removed.i dont know how it hapend the only thing that i know is that i havent removed it myself.can anybody tell me me how to fix this problem??

Hi,
I've replied on your earlier thread on the link below.
http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/recovery-partion-has-been-removed/m-p/75...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Recovery partition has been removed

Hi sir
I recently purchased a HP pavilion g-1202 TX series, I have installed Windows 7 64-bit OS, I found that I had only single drive i.e. C: for use, thought of creating another partition and shrunk the C drive, after this I found that HP RECOVERY MANAGER SAYS "Recovery partition has been removed - the recovery media creation option is no longer available"
Then again I tried expanding the C: drive back to its old stage, even then I found the same error, Now how can I get back HP RECOVERY.? and create Recovery Partition?

if you havent created the recovery media already from your computer, there is only option to get media from HP.
contact HP to order Recovery media. in most countries you can order it online, else contact HP phone support.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bph07143
if no option to order media for your country, contact country HP support.
visit www.hp.com and select country from the left botttom. now select contact HP or connect with HP. reach support to get a set of recovery media to make your computer recover and work as factory install.
hope it helps. Good Luck !!!
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

"Recovery Partition has been Removed" Message in Recovery Media Creation

HP Pavilion G4 2205tx - C5j09PA#UUF
Windows 8 64-bit
"Recovery Partition has been Removed" Message in Recovery Media Creation.
i bought My new HP pavilion G4 laptop just two days ago and didnt change any thing in two Drives named Drive C: for windows and D: for HP Recovery.
now i want to Make a Recovery Disk with HP Recovery Manager Software.
but it show a Massage: "Recovery Partition has been Removed" in Recovery Media Creation Section.
in My Computer Recovery Partition is Almost Full (3.26G of 25.5G is Free) . so i think Recovery files present there .
i haven't any Access to HP for Buy recovery disk or Call Support.
Thanks
This question was solved.
View Solution.

I don't know why your PC is saying your partition is gone - you're right, it doesn't look gone. I do know that if you use the Support Assistant to make backup copies of your Recovery Disks and Then instruct it to remove the recovery partition to give you more space on the hard drive, it will delete the HP factory image of Windows 8 from the recovery partition and leave the normal Windows repair tools behind.
There are tools however that allow you to create your own recovery partition complete with these Windows repair tools and a new image of your instalation so you can restore from that. You could use this tool: Windows 7/8 - OEM Recovery Partition Creator found here: http://forums.mydigitallife.info/threads/21978-Windows-7-8-OEM-Recovery-Partition-Creator but thats a lot of work and it would be faster and easier just to backup your data and restore from your HP recovery disks you made from Support Assistant. If you didn't make the disks, HP may opt to send you a copy.. they do not normally do this but I have read that some people have good luck getting a free copy of the media from HP.. otherwise they want you to buy the recovery disks ($40.00) . I suppose it depends on the exact circunstances of your situation.
Another solution is to use Macrium Reflect Free Edition to ghost or clone your system. You can then restore your whole system even with your custom programs installed, to the exact state it was in when you made the backup image. ( this may take several dvd's) I suggest you go this route because restoring your system with Macrium Reflect is Much faster than restoring from the HP Recovery Disks. Even if you do obtain another copy of the Recovery Disks, you should use this tool to make another backup that you can customize to your liking. Your re-installs will be faster, they will already have your chosen software installed, and you will save wear and tear on your HP Recovery Disks. You can then safely delete the recovery partition to gain back that space on your hard drive (since you cannot access it anyway, you won't need that space being taken up). BUT.. you cannot restore from UEFI Mode which is what HP ships with. You have to go into your Bios settings, and switch to Legacy Bios mode, (which disables Secure Boot) FIRST or else the Macruim recovery boot disk will not load to install the recovery image. After the system re-installs you can go back into bios settings and disable Legacy bios and re-enable secure Boot if you like. ( Windows 8 will load in both UEFI mode with secure boot enabled or Legacy bios mode.. it's your choice. UEFI mode will load faster but it will cause problems if you want to dual boot the system with another OS) Hope this helps.

Recovery drive has been removed

hi
i have a pavilion dv6 - 2140se
my recovery partition has been removed
i want buy and download it
please help me

Here are the specs for your HP Pavilion dv6-2140se Entertainment Notebook Computer. Sorry, but HP can't and/or doesn't make Recovery images available for download. Please contact HP, in your region / country, via the HP Worldwide Support Portal to check on the availability of HP Recovery Discs for your computer.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

SL500, Product recovery function has been removed from this sytem

I upgraded my SL500 from Vista to windows 7 OS several years ago and lately the OS has been acting weird (freezing, very slow at times) so I am thinking something is corrupted somewhere and want to restore it back to the manufacturers state. However, when I try to do this through rescue and recovery, it tells me that the recovery function has been removed from the system. I'm assuming that when I upgraded from Vista that R&R was no longer compatible so I installed version 4.5. My laptop did not come with backup OS disks and was told that this was the way to restore the system back to the factory state. How do I do this if I'm getting this message?

http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62978
try this. If this don't work then you would to reinstall the OS using the T43 recovery media disk set.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

The Product Recovery function has been removed from this system

I get the following error when I try full system restore - "The Product Recovery function has been reomed from this system"?
How can I fix this?

welcome to the forum:
Have you made a recovery media before this problem occured??? if you haven't you may need to call Lenovo and ask for a set of recovery disks, or just use your own XP/Vista OS you got from somewhere, and load it on your machine then enter you own serial number that come with your machine.
Then proceed to download the various softwares and drivers applicable to your machine, the most important that you won't have is the predesktop area, if you think this is unacceptable then call Lenovo and obtain recovery media from them (a nominal handling and service charge of around 50 USD will be charged).
http://www-307.ibm.com/pc/support/site.wss/product.do?doctypeind=9&template=%2Fproductselection%2Fla...
fill in the detail and download away.

The recovery partition from my hp presario cq50 104ca notebook has been removed, if you are able to

Hi to all
Assume that the recovery partition from my hp cq50 104ca has been removed because in the past many times, I could reset back to factory setting, just by holding down alt and control and f11 by starting point. But now since few weeks can not do it. If you are able to assist me with that issue however.
Thank you in advance
Munir

Hi Munir,
If you have created your set of Recovery Discs, you can use these to reinstall the operating system - this procedure will also re-create the Recovery Partition on the Hard Drive.
If you don't have these discs, you can order a replacement set of Recovery Discs using the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance

How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance downloading it again, especially because (believe it or not) I added it to my phone because that's precisely where I wanted it!! Any help much appreciated

FYI I had to put this link into firefox to reply - because **** back safari just wouldn't register my clicks to any of the links on the post... Despite reloadeing and even restarting my computer. Totally annoying and a massive pain in the ***.
But in terms of my initial query; thanks for responding. But no, this is NOT the cause of the problem. I have auto sync and sync over wifi activated, but have also selected manually manage music and videos. Plus, all of my music and videos are on my macbook, absolutely all of it, so if it my phone was syncing with my macbook everything would still be on the phone. Life would be peachy if my phone jsut copied everything that was on my macbook, but unfortuantely it keeps deleting tracks for no apparent reason.
Any thoughts greatly welcomed, because at the moment i can only conclude that my iphone is crap.

Goods receipt when PO creator has been removed from org structure ?

Hello in my organisational structure PPOMA_BBP, i have 2 users, X and Y.
X has created a PO in the SRM portal.However , X has been removed from the org. structure.
Is it possible for Y to make the goods recept( that is , Y logs in the portal and makes the goods receipt) ?

Hi
Did you try to delete the user ? Did you get any error message?
Note 1148837 - SRM user cannot be deleted
When trying to delete an SRM user the system will check if there are still
related SRM documents in the system. If there are active documents in the
system the deletion is not possible. This is the correct system behaviour.
But even if all related SRM documents are archived the deletion is
sometimes not possible, because there are residual entries in table
CRMD_PARTNER linked to this user.
More Terms
User crmd_partner residual entries deletion active document
Cause and Prerequisites
Solution
The attached report PARTNER_SET_DELETE will display in simulation mode all
residual entries in table crmd_partner with invalid item or header links
and in non simulation mode it will delete the corresponding crmd_partner
entries.
Header Data
Release Status: Released for Customer
Released on: 10.03.2008 11:54:37
Priority: Correction with low priority
Category: Help for error analysis
Main Component SRM-EBP-PD Procurement Document Methods
Additional Components:
SRM-EBP-ADM-USR SRM User Administration
Valid Releases
Software Component Release From
Release
To Release and Following
SRM_SERVER 500 500 500
SRM_SERVER 550 550 550
Support Packages
Support Packages Release Package Name
SRM_SERVER 500 SAPKIBKS14
SRM_SERVER 550 SAPKIBKT12
Correction Instructions
Ref note 550071 too..
regards
Muthu

In Lion the command to back up library to disc has been removed? How do I do this now?

In Lion the command to back up library to disc has been removed? How do I do this now? Apple Support has given me a case number and accelerated it with a call back in a few days, and even the techs were surprised by the removal of the ability to incrementally back up to any kind of disc any items added to the iTunes Library since it's last back up.
While this command was in all previous iterations of iTunes, even most of the techs are working from iTunes 10.3, the Lion version has this removed. Help only mentions Time Machine as the back up method. Sorry, I've had too many hard drives go bad, and not one DVD or CD has failed when I needed to retrieve a past purchase or addition of any kind to the iTunes library.
Purchasing from the iTunes store just got less viable, IMHO.

Dave-
Thanks for the feedback. Those nasty old deprecated features, eh? Seems you are correct that it will now be a third party solution.
I just finished chatting with Mike Bombich about using his Carbon Copy Cloner 3.4.1 ( http://www.bombich.com/index.html ) to do the job.
He gave me a rough outline of how to set it up for incremental back up of iTunes ~/Music/iTunes or
~/Music/iTunes Music. Creating filters ( http://help.bombich.com/kb/explore/excluding-files-and-folders-from-a-backup-tas k#creating ) tells how to create and save different tasks.
I'l check it out and report back shortly.

IPhoto & iCloud has been removed when I reinstall?

I have a problem, my applications iPhoto & iCloud has been removed when I reinstall it to Mac OS X Lion. I need to purchase to App Store?

Hi, Philipp,
Thank you very much for your prompt reply and support. The IE icon disappeared immediately after I downloaded MF. I tried to download IE again but without success. In the end all my icons on my start page disappeared, although I do not think this was to do with MF. I had to resort to restoring my lap top to factory settings for the umpteenth time and I have now got IE back but no MF. I will keep your advice and will try again when I am feeling brave enough and have sufficient time to try and download MF again. I am not confident with technical problems and greatly appreciate your help and support.
Kind regards, K.

Adobe reader 9 - Updater Plug-in has been removed

Prior to installing the recent version of Adobe reader, I was able to populate an Adobe reader form. When I now try and populate the same form, I receive an error message "Updater plug-in has been removed. Please re-install Acrobat to continue viewing current file." I have done a re-install but am still unable to populate the same for that I was able to do prior to the Adobe 9 upgrade. Please help!

Thank you for your reply. Unfortunately that link does not help - here's the full chain:
http://www.adobe.com/support/downloads/product.jsp?platform=windows&product=10
(Select 9.4 update - multiple languages, full download)
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4854
(Click Proceed to download)
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4854&fileID=4521
(Click download now)
http://get.adobe.com/reader/
(Click download now)
http://get.adobe.com/reader/download/?installer=Reader_9.4_English_for_Windows&i=McAfee_Se curity_Scan_Plus&a=ARH&a=Air_Installer&d=Google_Toolbar_6.5&os=Windows 7&browser=ie&type=activex
(Unable to progress further as ActiveX installation is required at this point)
Thanks

Unable to initialize Photoshop because the preferences file has been removed

Hello
After a week without using photoshop, I can no longer open it. As soon as I try this message appears: "Unable to initialize Photoshop because the preferences file has been removed."
So, I went to look for this preferences file that I've never deleted and I can't find it.
I tried to reset photoshop with keyboard shortcuts preferences, it does not work. I also uninstalled and reinstalled the software, it does not work either.
What else could I do ...?
Thank you for your help.

lola.marceau wrote:
I tried to reset photoshop with keyboard shortcuts preferences,
Seems odd that such a problem would crop up on its own. That kind of sounds like a registry or permissions problem. What other things did you do with the computer between the time it worked and it didn't?
And if you're willing to uninstall / reinstall to try to recover operation, it might be prudent to try the Adobe cleaner tool to really be sure you've uninstalled everything...
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
-Noel

After downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet

after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks

YES!!! YES!!! YES!!!
I got it!!! Yes!!!
Guys, I've solved my problem about that error -10202 (Selected driver not found).
I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
That file is called "U.S. - International.rsrc" and it's stored in the following path:
"Macintosh HD/Library/Keyboard Layouts"
So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
That's the clue!
When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
I hope I can help all of you.
Regards,
Renato Veiga.

Checking if a movie clip mask has been removed

Hi,
I am creating a scratch card type effect and would like to know hen the user has completed scratching off the top layer.
Currently i am using movieclip.mask and assiging it a sprite and using
               mask_mc.graphics.beginFill(0x000000,1);
                mask_mc.graphics.drawCircle(mouseX, mouseY, 50);
                mask_mc.graphics.endFill();
to remove the mask. I would like to know if there is a way i can check what percentage of the mask has been removed.
Is there a way to do this?
I was looking of properties of mask or graphics that might help but could not find any suitable.
Any help would be appreciated.
Emma

glad that worked out for you. Yes trace is your friend.
BTW you need to use the array notation for everything and it is generally not such a great idea to use _root -- just in case you later load content into another swf the _root will change.
So if this were me....
var sp:ScrollPane=quiltpane
var myContent:MovieClip=sp.spContentHolder.quilt;
And then later
myContent["square"+loopcount];
Easier to read, easier to type. You can give those different names that are more meaningful for you. Also you will get code hinting since the variables are typed -- you won't get that with the array notation. You could even do something like:
for(var loopcount=0;i<numSquares;i++){
var curSquare:MovieClip=myContent["square"+loopcount];
curSquare._alpha=blah blah
blah blah blah.

Recovery partion has been removed...help!!!

Similar Messages

Maybe you are looking for