Recovery partition and recovery tools

Hi all,
I just wanted to know what others think, or how you guys are dealing with this.
The case is - just unpacked brand new X220, so far so good, everything works.
But, every few minutes I get warning about low disk space on disk Q: - Lenovo recovery partition. Fine, it is basicaly read only, but unexperienced users might be worrying about it and everyone else definitely will be annoyed very soon.
I know, I can disable this warning via regedit, but is it best practice to digg into reg after unpacking fresh laptop?
Other thing is - after startup I got notice about creating recovery disks. Yes, might be helpful is some situations. But, again, X220 doesn't have cd/dvd burner, so where I suppose to create those recovery disks? There is no option to save ISOs anywhere, network, usb, etc. Next - I'm used to R&R, which saved me on few times. Looks like it is not installed, allright, trying to install - uops - "no free space on your computer".
Now the point is - I can manage all those quirks, but laptop is for user which is really not experienced in any IT woo-doos.
It should work properly out of the box!
When you buy a new car, do you need first swap tires or tune your air filter? C'mon Lenovo, most expensive X class latop with something like that?

Similar Messages

Recovery partition and Recovery disk doesn't work

I have HP Pavilion dv6000 Windows Vista Home Premium with Recovery Partition at drive D:\. Here is my problem. I want to use the System Recovery to put my PC to its default setting, I have use Recovery Manager, but System Recovery does not work. I have also use a recovery disk, but nothing works. Using the Recovery disk, while the recovery is in process formatting the windows partition, and the process reaches 33%, a windows error pop-out (Error: ox4001100200001005). I need help because my laptop is unstable and I cannot work.
Yours truely,
colorlime

Enter BIOS setup by tapping/holding the F10 key immediately after powering on the laptop.Use Diagnostics to test your hdd.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

T510 Recovery Partition and Recovery Disks

Hi There
I did a clean install of my T510 with Windows 7 64bit. I didn't create recovery disks prior to doing this, however I still have the recovery partition. How do I go about creating the recovery disks and/or how would I go about recovering to factory defaults now from the recovery partition?
Thanks
Neal

Hi, thanks for your replies,
I have been looking at the disk management utility. What I usually do is make my DAW/uadio partition first when I format as it wriotes to teh outer part of the hard disk which is quicker as teh read and write heads have less to travel, and then I stick my main general partition next, as i dont care if its not so fast.
The problem is that from the factory it already has the OS with all teh crap that comes with it on the first partition....any idea how to swap them around, or how do i just installl windows 7 on the second partition if i dont just have a simple windows 7 disk!
Cheers

I have lost my recovery partition and recovery dvds for dv6-6c20tx notebook. how can i purchase one?

HP Pavilian dv6-6c20tx Entertainment Notebook PC
Windows 7 64 Bit

Hi:
Please read the info at the link below on how to order recovery disks:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&tmp_task=solveCategory&cc=us&dlc=en&lan...
If you can't get recovery disks, you can use this workaround if you can read your 25 character product key:
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to DVD's for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Paul

How to create up-to-date Recovery Drive and Recovery Partition on Windows 8.1 U1.

I am running 8.1 and exploring the recovery options.
I'm periodically creating recovery images, etc. but would like to do better than that.
I'd like to know how to:
Create an updated Recovery Partition that will restore to a Recovery Image (WIM) that I choose.
Modify / Create a Recovery Drive that includes a system image
of my choice, as opposed to an image created by the manufacturer / supplier (and the extra work that that implies). If I can create an up to date partition and mark it as such, then I'm clearly done. Should I not be able to sensibly
make my own partition, how do I create this on a USB recovery drive? (The built in interface has a Boolean option, use hard drive recovery partition OR use nothing. This would be solved if it
also had an option to use current recovery image. I'm happy to write simple code to make this happen if that's what it takes.)
Put another way. I can make a recovery image at will, how do I create a recovery partition and recovery drive to match?
I'm no expert on the ins and outs of Windows 8.1 recovery, if this is already covered elsewhere, I'd appreciate a link.

I have documented an unsupported process for creating an automated recovery for use in a task sequence
here. However, if I read your post correctly you are suggesting being able to do this from USB media. The method for creating the recovery partition is simple. It is simply a partition containing a folder called RecoveryImage with your install.wim
inside. Reagentc is the tool that will actually tell Windows where that recovery is. While I don't personally have a use for what your suggesting, I may give it a shot just to see if it can be done. I suspect it will work.
Here are the links that got me started:
ReagentC:
http://technet.microsoft.com/en-us/library/dd799242(v=WS.10).aspx
Creating Push Button Reset:
http://technet.microsoft.com/en-us/library/hh824917.aspx
Good Luck!
bill
Regards, Bill Moore @BMooreAtDell

Windows 8 Deleted Recovery Partition and Saved but No Boot

Hi
I ve Hp Pavilion G6 - 2336el , i bought it 5 months before and 2 days before i installed Ubuntu but by mistake ubuntu deleted all partitions (included recovery partition) and created one for itself.
by using DiskTest tool on ubuntu i recovered some files and full of recovery partition.
after that, for re-install windows 8 from recovered partition , i did set partition bootable by using another tool which was running on ubuntu.
now, windows 8 repair screen appears but im getting -a required device isn't connected or cannot be accessed- error.
i googled about this problem but the solution didnt work for me. (boot change from bios)
by the way , for precaution , i made an IMG file of recovery partition also (which is 14gb).
i tried burn a bootable disk with that image but didnt work because some files in img is too big for fat32.
after that i tried boot from EFI file but bios cant reach to Ntsf part. i tried to explorer IFE file in fat32 but i couldnt because IFE file which i ve is more than 13gb (same problem for fat32 file system)
so summary :
i ve recovery part with files (install.wim , *.ife files...) but getting error.
i ve an .img of partition but couldnt make bootable disk
Maybe there s a tool for reach ntsf then i can boot from ife...i dont know i need ur help.
what can i do?
im really so sad , already i lost many important data, files , pics.. im living in italy and im a student (not italian) and i really cannot order another cd from Hp for recovery.
Im waiting your help.
Thank you.

well, i downloaded windows 8 64bit Enterprise Evl. from microsoft site as says here : http://h30434.www3.hp.com/t5/Notebook-Recovery/Windows-Vista-7-and-8-ISO-Image-file-Download-Links/t...
and i installed without problem..
but before install the system with ubuntu live cd i booted pc and i found my product key which is embedded in bios.
then installed win8 Enterprise 64bit..
now my problem is activation, when i digit the key , before active it, it says under the box it s correct but when i click to active it then im taking the product key you entered will not work with this edition of windows 8 error..
what should i do
thank you

Missing Recovery Partition and Unrecognized File Systems

So, a long time ago I accidentally deleted my recovery partition and have recently been trying to fix it so that I can upgrade my OS to Mavericks. After browsing around here I found the Recovery Partition Creator 3.7 and used it to create a new recovery partition. Using the diskutil list command everything seemed to be fine and it looked like the partition was successfully created so I tried reinstalling OS X Lion by holding command R at startup. Doing so brought up the internet recovery menu and I selected reinstall Lion which was still unsuccessful because "a recovery partition could not be created". So, I decided to check in disk utility to see what might be wrong and I used the disk utility debug command in order to access disk utility's debug menu and show all the hidden partitions. Now, looking at these partitions I see two hidden partitions: disk0s1 which is an EFI partition, and disk0s3 which is the Apple Boot Partition that was created by Recovery Partition Creator 3.7. After verifying the partitions, disk utility is telling me that both my EFI and apple boot partitions have unrecognized file systems, my Macintosh HD partition is fine. At this point I do not know what to do.
Below are photos of the diskutil list and of what disk utility is showing me for the two hidden partitions.
For reference I am running OSX Lion 10.7.5 (11G63) on a early 2011 13 inch Macbook Pro (Base Model).
Bootrom version: MBP81.0047.B27
SMC Version: 1.68f99
Thank you all in advance for your help, feel free to ask me any questions.

Just an update, I went ahead and installed Lion again over the existing TM restored installation using the Lion Update file and at least File Vault is working. Interestingly, I still do not have a Recover partition so obviously something new for Apple Support to learn.

HT204053 hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)

hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)

hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)

Some configurations such as a software or hardware RAID do not support a recovery partition and can't be used with Find My Mac.

I'm getting the following error message when attempting to invoke "Find My Mac"
Some configurations such as a software or hardware RAID do not support a recovery partition and can't be used with Find My Mac.

You have no recovery partition. This is a normal condition if your boot volume is a software RAID, or if you modified the partition table after running Boot Camp Assistant to create a Windows partition. Otherwise, you need to reinstall OS X in order to add a recovery partition.
If you don't have a current backup, you need to back up before you do anything else.
You have several options for reinstalling.
1. If you have access to a local, unencrypted Time Machine backup volume, and if that volume has a backup of a Mac (not necessarily this one) that was running the same major version of OS X and did have a Recovery partition, then you can boot from the Time Machine volume into Recovery by holding down the option key at the startup chime. Encrypted Time Machine volumes are not bootable, nor are network backups.
2. If your Mac shipped with OS X 10.7 or later preinstalled, or if it's one of the computers that can be upgraded to use OS X Internet Recovery, you may be able to netboot from an Apple server by holding down the key combination option-R at the startup chime. Release the keys when you see a spinning globe.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
3. Use Recovery Disk Assistant (RDA) on another Mac running the same major version of OS X as yours to create a bootable USB device. Boot your Mac from the device by holding down the option key at startup.Warning: All existing data on the USB device will be erased when you use RDA.
Once you've booted into Recovery, the OS X Utilities screen will appear. Follow the prompts to reinstall OS X. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
If none of the above choices is open to you, then you'll have to start over from an OS X 10.6.8 installation. There's no need to overwrite your existing boot volume; you can use an external drive. Install 10.6 from the DVD you originally used to upgrade, or that came with the machine. Run Software Update and install all available updates. Log into the App Store with the Apple ID you used to buy 10.7 or later, and download the installer. When you run it, be sure to choose the right drive to install on.

Maverick upgrade: Can't create recovery partition and infinite loop

Hi,
I'm using MacBook Air Mid 2011 with 256 GB SSD (~30 GB free disk space) running MacOS 10.7.4. So far I never followed the suggestion to upgrade to MacOS Maverick but yesterday I thought, OK, let's do it.
After the first reboot the setup started working, but after about 5 minutes it quit with the error message, it can't create the recovery partition and said, after a reboot, I would be sent back to my old MacOS.
However, it booted again into the setup, worked a few minutes, quite with the error message and said, I have to reboot. I tried this a few times but didn't find a way to cancel the setup, but boot into my existing MacOS installation.
I found no other solution than to make a full restore with TimeMachine.
I'm now wondering what the problem was. One point may be that I use FileVault for hard disk encryption and it never asked me for my hard disk password. This is in particular remarkable because TimeMachine didn't show me my internal hard disk as a restore target until I went to the disk utility and used Unlock on my hard disk where I had to enter my password. So maybe this is related?
I know I could run the upgrade without creating a recovery partition but now I'm concerned that other problems could occur if I don't identify the root cause.
Best regards,
Dominik

You can try making a Recovery Volume using the 2nd link if you still have the installer.
Recovery Partition – Recreate Without Reinstalling
Recovery Partition – Recreate Without Reinstalling (Requires Installer)
You can also try installing in the Safe Mode.
Safe Mode
Safe Mode - About
Do you have a Boot Camp partition?

Whether a Recovery-partition and its all contents will be created automatically..?

Please tell me whether a Recovery-partition and its all contents will be created automatically when I install Mac OS X 10.7 on a fully formatted new hard drive?

Gennady Abakyan wrote:
Please tell me whether a Recovery-partition and its all contents will be created automatically when I install Mac OS X 10.7 on a fully formatted new hard drive?
Usually, but there are some conditions that can prevent it. See "Some features of Mac OS X Lion are not supported for the disk (volume name)" appears during installation.
So, I get exactly the same (hidden) Recovery-partition on my Mac mini 2011 as from the store if I delete the hard drive current partitions scheme and create a new scheme with an only one (bootable) partition?
You can't do that, at least not from the Mini, while you're runing from it.
You can, however, remove and/or resize partitions in most cases. See #4 in Using Disk Utility.

Deleted Recovery Partition and It no longer shows up on reboot! HELP!

Accidently deleted Recovery Partition and it no longer shows up on reboot! HELP! I'm trying to install windows on my mac so i do some CAD, but i don't want to proceed without getting the Recovery Partition back.

If you deleted the Recovery volume, the only way to create your Recovery HD again is by reinstalling OS X. If your Mac came with the OS X version you have, start in Internet Recovery (holding Command, Option and R keys) and reinstall OS X

Deleted and lost my recovery partition and everthing will deleted.

Sir; my laptop has attacking some big viruses, i fix this viruses using McAfe antivirus, the option for SHRED the selected drive D (unfortunately recovery partition by mistake selected) files in shred scanning, after that D drive has all files deleted. i lost my partition drive. At the second stage, windows 10 upgradation notification in toolbars, i installed and upgrade to Windows 10. after the restart the screen will be in BLUE or BLACK stage, not to boot to the operating system. I will try to reset the early stage of my laptop, but not reseting the laptop, then try to refresh, but it could not been refresh, then try to factory reset, this one is also failed, then try to restart and hit esc key to enter boot option screen, try it on recovery option, this one is failed to the same problems. i can try all the ways to get my recovery drive os.Finaly i choose a option for use windows bootable disk to put the drive and reinstall the laptop, in installing process select drive to instal the os partition, no drives to select choose options, that time i will delete all the drives and create ne drive and partition. after installing the os but i can't get the recovery partition, and i will try to hp support to check updates, only the recovery is not found the check updates option. my laptop has 3 months warrenty remaining, but now my laptop is expired in 25/1/2015. please give me help in what can i do for next procedures and how can i get the previous mode or get recovery partition in my laptop. is it possible for early stage of my laptop? or A newly purchased hp laptop it contains all functions, these functions install my laptop?

, Hello and thanks for posting on the HP support forums. You will need to obtain a copy of the recovery media for your notebook. Here is a link to help you get a copy. HP PCs - Obtaining HP Recovery Discs or an HP USB Recovery Drive | HP® Support
Thanks again for posting and have a great day.

Hp4530s lacks recovery manager and recovery patition.

My hp probook 4530s - (core i3 2350m - Windows 7 64 bit) laptop lacks recovery manager and recovery patition. It has genuine windows 7 but it doesnt include recovery CDs as well.
1)So how can i recover the computer and set to factory settings with original OS and Hp software?
2)Can i do it by pressing F11 when booting.
3)Will it takes to recovery manager even if there is no recovery partition or recovery manager in the laptop?
4)Sellers say this product has a hidden recovery partition and it will work when you press F11. Is that true?
Please reply me as soon as possible. Thank you

Hi:
if there is no recovery manager or recovery partition, then you won't be able to use the F11 method to recover the OS.
I never heard of a hidden recovery partition on any HP business notebook I am familiar with.
I guess you can always start up the PC and at the beginning of the HP welcome screen, tap the F11 key and see what prompts you get (if any).
The best thing to do, is to order a set of recovery disks from HP by calling them for the country you live in at the link below.
Call the number listed for business PC's notebooks. You will need to provide the model number and serial number.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
You can also make your own windows 7 reinstallation DVD if you can read the 25 character product key on the bottom of your notebook. Here's how:
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Or use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB method of compilation.
http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Paul

My MacBook Pro didn't come with a recovery CD and recovery HD will not show up

My MacBook Pro didn't come with a recovery CD and recovery HD will not show up

if you're running Snow Leopard - there there will be no recovery partition - only Lion and Mountain Lion has that.
did you buy your Macbook used?
you can call Apple to order the original install DVD for your Macbook or you can order Snow Leopard for $20.

Recovery partition and recovery tools

Similar Messages

Maybe you are looking for