Recovery partition disappeared

Hello everybody,
I'm using "HP G62x-400 CTO Notebook PC". Yesterday I installed "Powerquest Partition Magic 8.0". As it was incompatitable, uninstalled it. After that, I found my Recovery partition disappeared. I found the partition in Disk Management section of Win7 (My Computer[right click]> Manage> Disk Management) without any drive letter. I tried to set a drive letter it show following message:
After that, I installed "EaseUS Partition Master 9.1.1 Home Edition". This software also shows the partition without any drive letter. It also shows the used and unused percentage of the partition, which means no data was removed. When I tried to set a drive letter it show the following error (Mounting volume failed). I've restart the windows several times and tried but failed.
Any one please help, how to recover the partition and the data.
Thanks,
Siddique

In Windows 7
Start --> All Programs --> HP --> Recovery Manager
If this still exists in you Windows 7 desktop you should be able to perform a Factory Image recovery and return your notebook to its delivered condition. The recovery will recreate the partitions.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

'Recovery' partition disappeared after BootCamp installation

Since i've installed Windows on BootCamp, Lion's 'Recovery' partition containing a recovery system just disappeared.
Is there a way of getting it back? It isn't really important, but i was just wondering if it could be reinstalled.
Thank you!
penguin01210

Since i've installed Windows on BootCamp, Lion's 'Recovery' partition containing a recovery system just disappeared.
Is there a way of getting it back? It isn't really important, but i was just wondering if it could be reinstalled.
Thank you!
penguin01210

Why my recovery partition disappeared suddenly?

I have windows 8 in BootCamp since 3 months, but now when I restarted for switch from Mac to windows, I don't see the recovery partition ¿what happened?
I have Mac OS X 10.8.2 and Windows 8 pro

First Windows 8 isnt' supported currently so it's a miracle you got it installed. Then I'd recommend posting to the Boot Camp forum, that is where the Boot Camp and MS Windows gurus hang out.
Good luck.

Recovery partition has disappeared

Hi, after installing Mountain Lion the system was running perfectly. But now my recovery partition has disappeared. Is there any way to recover this partition without installing the whole system?
Thx a lot ...

You have no recovery partition. This is a normal condition if your boot volume is a RAID, or if you modified the partition table after running Boot Camp Assistant to create a Windows partition. Otherwise, you need to reinstall OS X in order to install a recovery partition.
If you don't have a current backup, you need to make one before you do anything else, unless of course you have no data you want to preserve.
You have several options for reinstalling.
If you have access to a local, unencrypted Time Machine backup volume, and if that volume has a backup of a Mac (not necessarily this one) that was running the same major version of OS X, then you can boot from it into Recovery by holding down the option key at the startup chime. Encrypted Time Machine volumes are not bootable, nor are network backups.
If your Mac shipped with OS X 10.7 or later preinstalled, or if it's one of the computers that can be upgraded to use OS X Internet Recovery, you may be able to netboot from an Apple server by holding down the key combination option-Rat the startup chime. Release the keys when you see a spinning globe.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
If your Mac is unable to use Internet Recovery, the simplest solution would be to run Recovery Disk Assistant on another Mac to create a bootable recovery device.
When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
If none of the above options is available to you, then you'll have to start over from an OS X 10.6.8 installation. There's no need to overwrite your existing boot volume; you can use an external drive. Install 10.6 from the DVD you originally used to upgrade, or that came with the machine. Run Software Update and install all available updates. Log into the App Store with the Apple ID you used to buy 10.7 or later, and download the installer.

IMac 27" (late 2011), Mountain Lion, Bootcamp, and OSX partition disappearing and refusing to mount

Hey all,
I'm putting this as a question in the discussion forms for bootcamp as I'm not sure where else to put it, but I resolved an issue I was having and having spent all of yesterday and the day before reading through this community and some others looking for answers and mostly seeing "hope you have backups, time to format!" (which to me is not always the best answer), I thought I would put it here for search purposes (with all the key words I had to use) in case anyone else has a similar issue.
My scenario was this:
2011 27" iMac with Mountain Lion installed and Windows 7 installed on a boot camp partition.
1) Haven't been in windows in a while, wanted to play some windows only steam games. Load windows 7. All is well. Have fun. Time to reboot into osx.
2) Reboot using bootcamp toolbar icon.
3) Wander away from computer. Come back to find windows 7 has loaded again. "That's weird", I think. Reboot again, this time hold down option key to select boot device.
4) Discover the only options are the Bootcamp partition and the Recovery partition. OSX "Macintosh HD" partition has disappeared. Huh.
5) Load recovery partition and load disk utility.
6) Review disk utility to discover the Macintosh HD partition shows up in the list, but won't mount. Run verify and repair tools. Errors are as follows: Invalid node structure, invalid key length, invalid record count, etc etc. Running a repair fails - disk utility advises me to back up and erase the drive and that the partition is unrepairable. No offense disk utility, but I think I'll try a few more options first.
7) Purchase DiskWarrior on advice of multiple posters in other threads and general online consensus of it being capable of fixing these sorts of errors. Go through process of loading bootable dvd.
8) Diskwarrior cannot see the Macintosh HD partition. This is bad. Review more threads. Advice is that if diskwarrior can't fix it, hope you have backups and wipe the drive. Likely to be hardware failure. I'm skeptical of hardware failure, because windows is chugging along running fine if I boot into it, and I ran a scan of the windows partition and it came back clean. SMART status is also showing the drive is ok. However, running out of options and starting to lose hope.
9) Follow advice in this support topic: http://support.apple.com/kb/ts1417?viewlocale=de_de Both safe mode and disk utility aren't options (safe mode won't work without it seeing the partition) so sounds like fsck is the final option.
10) Start up in Single User Mode (http://support.apple.com/kb/HT1492). Run fsck per instructions. It reports back ok.
11) Realize fsck is checking the recovery partition, and not my damaged OSX partition. Realize I don't know anything about unix commands and have no idea how to tell fsck to check a different partition.
12) Learn that I need to find out what the drive id is for the damaged partition. Reboot, load up disk utility, select greyed out "macintosh HD" partition, click info. Write down the id: disk0s2 (likely to be the default for you as well if you have one drive in your imac and a default bootcamp install).
13) Go back into single user mode and type the following (without quotes): "fsck_hfs -fy /dev/disk0s2"
14) (Forgot to copy down exactly what it said at this point, but gist of it was that the drive had errors and isnt repairable). Feel like ****, thinking this is unlikely to resolve itself nicely.
15) With nothing to lose, try to force fsck to rebuild the catalog - "fsck_hfs -rc -d /dev/disk0s2" I found this syntax on some forums and can't find the thread again. I have no idea what the -rc and -d do that -fy don't, but if someone can let me know, that'd be cool. Either way, this resulted in something actually happening. Tells me it is "rebuilding catalogue b-tree". Still, finishes with a bunch of errors about improperly linked files, more node errors, etc etc.
16) Retry "fsck_hfs -fy /dev/disk0s2". It seems to be doing stuff now, even though there are lots of errors. Continue to re-run fsck using this syntax. Probably ran it 10-15 times. Takes over an hour. Finally, minimal errors being reported.
17) Realize that perhaps I should try Diskwarrior again now, since I've managed to do soemthing to the partition with fsck.
18) Run Diskwarrior from bootable DVD. Success! It now sees the damaged partition. Reports that it has a bunch of damaged crtitical files, and needs to be repaired, but hey, at least it can see it.
19) Let Diskwarrior do its thing, and reboot.
20) Boot from repaired OSX partition. Rejoice. Immediately plug back in the timemachine drive you foolishly unplugged to take away over the holidays and neglected to plug back in before you had commenced work on stuff you didnt want to lose through formatting, which is why you are so desperate to recover files rather than wiping and restoring from time machine backups and avoiding this whole mess.
TL;DR - If Disk Utility and DriveWarrior fail you, try running fsck (using different syntax that apple recommends) as many times as it takes to get the partition to a stage where diskwarrior can see it. All advice I saw for similar questions was to erase, reinstall OSX, and restore from time machine backup. For those of you who are foolish like me and had files that werent time machine'd, or those who operate without, maybe try this.
Hope this helps!

What -rc & -d do.
From: The fsck_hfs manual page.
https://developer.apple.com/library/mac/#documentation/Darwin/Reference/ManPages /man8/fsck_hfs.8.html
-d      Display debugging information. This option may provide useful information when fsck_hfs cannot repair a damaged file system.
-r      Rebuild the catalog btree. This is synonymous with -Rc.
-R flags Rebuilds the requested btree. The following flags are supported:
                         a       Attribute btree
                         c       Catalog btree
                         e       Extents overflow btree
I had the same problem as you but unfortunately "fsck_hfs -rc -d /dev/disk0s2" is failing saying: "The volume   could not be verified completely." I believe it's supposed to be telling me the partition's name (normally "Macintosh HD") between 'volume' and 'could' because there's 3 spaces in between the words.
"fsck_hfs -fy /dev/disk0s2" is failing with the same error.
I tried "fsck_hfs -r -d /dev/disk0s2" since the c appears redundant with a lowercase R. and it again says it cannot be verified completely and adds "volume check failed with error 7". Which unfortunately is not documented on the fsck_hfs man page!
Unfortunately for me, Diskwarrior still can't see my busted Mac OS partition.

HP Recovery Manager disappeared

Hi,
after repair of my Notebook HP ProBook 4530s (problems with hard ddisc) the HP Recovery Manager totaly disappeared, ESC + F11 doesnt work - HPRM simply doesn´t appear. Any idea? I wanted to reinstall my Win7...
Thanks very much!

Once the recovery partition is gone, its gone. You will have to use recovery disks to reinstall Windows.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Windows 10 clean install - Delete Recovery Partition

Hi, I upgraded my Yoga 2 to Windows 10 last week. Unfortunaltely, I am experiencing some issues. Sometimes I cannot see any differences between the buttons of the Quck Settings (former Charm Bar). All buttons have the same color whether they are activated or not. The Start Bar does not work probably either. Most of the time I cannot delete or add icons. I delte them but they do not disappear. I have to restart Windows to do this.I though about doint a clean new install using an USB drive and an external Keyboard with Touchpad via an USB hub. I already created the USB drive and it is recognized from the BIOS. As my battery was not fully charged I waited with the actual installation. My question is if I could delete the recovery partition while doing the clean install to have more space on the SSD? There was a partition manager in Windows 7 but I am not sure whether or not there is any in Windows 10?Should I copy the current recovery partition first? This should be the original Windows 8.1 Recovery or did Windows 10 overwrite it with the upgrade? Thanks for your help!

UPDATE 4 SOLUTION:
Somehow everything started to work on its own, maybe there was some kind of download on the background of windows, and before formating to windows 8 back, I decided to restart windows few times, and everything got fixed.
Thats my strange solution..... At least its working
So I suggest you to do every possible update on windows and 10 do few restarts, there are some background updates that we can't track probably, so let them settle and restart pc.

Boot-up, Shut down & Recovery partition

In-place upgrade from 8.1 to 10. It went well. However the shut-down takes very long to complete as well as the boot-up (when the HP motif on screen disappears to goes into a blank screen for a few seconds - patience is a virtue here as the Windows kicks in eventually). I have no issue with Windows 10 per se but I cannot identify what processes causes it to be slow. Is a new BIOS needed What are your experiences? Is HP able to offer a tool to upgrade the recovery partition: as it stands if the worst case scenario did happen and I was required to restore, I would have to go through Windows 8.1 then Pro upgrade, then Windows 10 upgrade including all the updates in between?

I do understand seeing the sheer volume of postings
Howver, I am frustrated:angryfire:
This morning it took 4 attempts to boot up. I got to the end of the boot up process, Windows loaded, other software loaded then power off o_0it booted fully and is on. it will stay on all day because if I switch off I can get the same on reboot.
My system details are as follows:
Motherboard: MSI 865PE Neo2-P
CPU: Pentium 4 2.8 Ghz – 533 FSB
PSU
RAIDMAX
DC +3.3V +5V +12V -5V -12V -5 VSB
10A/5A 26.0A 32.0A 13.0A 0.5A 0.8A 2.0A 420W
Memory: Crucial 512MB PC2700 CL2.5
CD ROM: Nec Double Layer 8x max DVD
Hard Drive: Diamond Max Plus9 120GB UDMA133 – Maxtor 6Y120LO
Graphics: ASUS V9570LE TD Geforce FX5700LE 128MB AGP 8x
LAN: Edimax 2.4Ghz - 802.11g Wireless LAN PCI Card
some Software: Windows XP Pro SP 2 Core Centre Norton Internet Security Asus Smart Doc

HT4718 How do I install the seperate system recovery partition after installing OSX on an external drive?

My Mac Mini (2011 - Mountain Lion) died on me and I'm trying to get Internet Recovery (or ANY recovery) to work. I have done the hold down D on boot hardware test and the extensive test and it says all is well. However Internet Recovery downloads (or appears to) and then I just get a never-ending spinning wheel and Apple logo.
I just installed Lion 10.7 from my older Mini that can't run Mountain Lion onto the newer Mini's hard drive as an external disk. How can I get the recovery partition added to that disk too?

Google recovery disk assistant. Hopefully that'll be what you need.

The guide to bootcamp assistant states that bootcamp can only be installed on a drive with a single partition. New Macs with Lion preinstalled have two partitions - the second is a recovery partition. How do I install Bootcamp?

Late in August 2011 I took delivery of a new 27" iMac with Lion preinstalled. I need to run Windows as well. Following Apple's written suggestion, I printed off the then current 12 pages of the document "Bootcamp Installation & Setup Guide" which clearly stated that the hard drive you were going to install on had to have on it, before install, a maximum of one partition. Using finder and disk utility I determined that there was only one partition. Unbeknownst to me, there was (is) an additional hidden (from those two pieces of software) partition on the disk. As of machines delivered new with Lion preinstalled, Apple has begun to include a "recovery partition". In that partition there is a copy of the software necessary to reinstall Lion via a download from the Apple App Store. Not knowing the partition was there, I cranked up "Bootcamp Assistant" which nicely offered to repartition my hard drive creating a "Bootcamp Partition" in addition to the existing. I told it how big to make each and hit the do it button, subsequently destroying my operating system. Oh, it very nicely told me, after the damage was done, how many partitions were REALLY on the disk and that I could not install Bootcamp cause there were too many partitions.
Luckily the the Recovery Partition, which at that point I knew existed, was not harmed and after doing some research on another compter, I used it to once again download Lion from the App Store and reinstall. So, I have recovered but am still stuck with the problem: how do I install Bootcamp in this new environment?

First you need to seriously back up your Mac.
A clone is an exact duplicate of your existing Mac HDD. Merely copying and pasting a drive will not make a bootable backup. In case of problems you can boot from an Ext HDD clone and use the utilities to repair, reformat, or clone the Ext HDD back to the internal Mac HDD. While Time machine back ups are easy you can not boot from it. The best thing to have for any kind of problem is a bootable clone backup on an external drive. Some even have two external backup drives in case one fails. There are two good apps for cloning named SuperDuper and Carbon Copy Cloner.
In dealing with the recovery partition a simple approach is to clone the Mac partition to an external disk then re-partition the Mac to a single partition (GUID partition table) . Then clone the external disk clone back to the Mac. You will now have only one Partition and Boot Camp assistant sould not object.
Some have recommended getting rid of the recovery partition while others have advised not to do this. If you have the Lion USB Thumb Drive you do not need a recovery partition so can discard it without concern. There is another way to get rid of the recovery partition if you decide to do it but first be sure to have a backup of your Mac ( I know I sound like a nagging mom but many dead computers have been saved by this simple precaution).
Use Disk Utility.
1) Make the Recovery visible in Disk Utility by using a program like Secrets:http://www.macupdate.com/app/mac/27025/secrets or MacPilot:http://www.koingosw.com/products/macpilot.php (15 day free trial).
2) Highlite the Recovery partition and Control click it and select Mount the partition.
3) With the Recovery partition highlited, erase the partition, you'll get an error message, ignore it.
4) Now highlite the top identity of the hard drive and select the partition tab.
5) Highlite the Recovery partition and press the minus sign.
6) Click and hold on the bottom edge of the partition above and drag it to the bottom, if it doesn't go there automatically, the press apply.

Factory recovery partition on windows 8 in Asus X551CALaptop

I purchased Asus x551CA notebook on 22nd Feb 2014. After about 45 days I formated hard disk partition
on which Activated Windows 8 operating systme was installed.I formatted an repartitioned HDD.
And I installed and uninstalled windows8 and windows 8.1 90 days enterprise evaluation edition. Because of
these link to factory recovery partition is broken.
I have created system image disks which are working to restore system. I forgot how I created these disks. May be
I did control panel>recovery>file history>windows 7 file recovery. So these disks should be System Image Backup.
I think these are not OEM recovery disks. When I insert these disks during reset and refresh I get a message
that "Media you inserted is not valid". And I am able to create system image on second partition of hard disk of
my laptop.I have also got product key of windows 8 by a program jellybean keyfinder.
To restore from discs created by me. I insert a repair disc then I go to UEFI settings. Then I change boot preferences to
boot from DVD. Then I go to Restore form images. Then computer asks me to insert my discs no from 1 to 4. One after the other. Then computer restore to windows 8. It looks alike as it was factory made.
-When I try to create a recovery drive by going to control panel> Recovery >create a recovery drive
Recovery drive dialog box appears but with grayed check box of "copy the recovery partition from PC
to the recovery drive". Please tell me how can it come with not grayed dialog box so that I can copy
recovery partition to USB pen drive? When notebook was new this check box was not grayed and I was able to
copy recovery partition on USB pen drive.
-Since I cannot copy recovery partition to USB therefore I also cannot reset and refresh windows 8 on
the basis of USB. It was working when notebook was new.
-And reset or refresh also not working on the basis of hidden recovery partition. How can it will start
working? It was working when notebook was new.
-I have tried diskpart command do make hidden recovery partition visible. But it becomes invisible
after restart. I used following command
1. Command Prompt Run as administer.
2. diskpart
3. list disk
4. select disk 0
5. list partition
6. select partition 6
7. assign letter z
by these commands hidden recovery partition becomes visible and again when I restart laptop it becomes invisible.
And I am not able to do anything with recovery partition E.G. copy the recovery partition to USB
When I created a system image using the following command I became able to refresh my PC. May be it was refreshing
on the basis of newly created image.
recimg /createimage D:\IMAGE81
recimg /setcurrent D:\IMAGE81
But it is also not working this time and it gives a message "Drive on which windows is installed is locked unlock it".
May because I installe AVG antivirus it locked the drive.
I also used REAgentC command
reagentc /setreimage /path F:\Recovery\WindowsRE\ /target C:\Windows /bootkey 4300
Maybe I executed above command once again I used D: instead of F:
And I was able to refresh PC but I was not able to Reset. And I was not able to copy recovery partition on USB
by going to control panel> Recovery >create a recovery drive.
Recovery drive dialog box appears but with grayed check box of "copy the recovery partition from PC
to the recovery drive".
((I am giving images of computer management in first_image no partition was created it was in factory made state. And
in second_Image I created an extra disk partition which is present on disk this time.)) I cannot give images because
of my account is not varified.
So I am giving output of diskpart command to understand disk partitions.
C:\>diskpart
DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
Disk 0 Online 465 GB 1024 KB *
DISKPART> list volume
Volume ### Ltr Label Fs Type Size Status Info
Volume 0 E DVD-ROM 0 B No Media
Volume 1 C OS NTFS Partition 186 GB Healthy Boot
Volume 2 D DATA NTFS Partition 130 GB Healthy
Volume 3 F DOWNLOADS NTFS Partition 128 GB Healthy
Volume 4 SYSTEM FAT32 Partition 100 MB Healthy System
Volume 5 Recovery NTFS Partition 900 MB Healthy Hidden
Volume 6 Restore NTFS Partition 20 GB Healthy Hidden
in the beginnig instead of D: (130 GB) and F:(128 GB) there was only one partition D:(258 GB) 130+128 GB.
Please tell me answers of following quesions:-
1. Tell me how to regain the link to factory recovery drive.
2. Please tell me how can I refresh and reset PC on the basis of Hidden Factory Recovery Partition. And how can I copy Hidden Factory Recovery Partition on USB and DVDs. I have 16GB USB pen drive and a DVD writer. So I can use these two storage media
only and except these I have 500GB HDD on my laptop.
4. I want to know that Factory recovery partition is useful or not. Should I delete it.
3. I have DVDs as I said above. On the basis of these I can reinstall windows 8. When I created these discs windows 8 was present on laptop. Currently windows 8.1 is present on laptop. Please tell me how can I create my own hidden recovery partition for
windows 8. I have upgraded to windows 8.1. So please tell me can I create my own hidden recovey partition for windows 8.1.
5. Can I download contents of factory recovery partition from internet.
6. Should I go to shopkeeper. He repairs computers as well. Probably he will manage for me to get Recovery partition discs. In this case these DVDs may be different from my DVDs as I mentioned above. Maybe only thing I get from these discs that I will
able to reset and refresh computer.
7. Microsoft shoult create a program that can re-establish link to factory recovery partition. And this program should be able to create new hidden recovery partition as well. As I have upgraded to windows 8.1. So I think I should have a new hidden recovery partition
for Windows 8.1. I think I can above thing my other way. If I create new set of DVDs by going to control panel>recovery> file history>System Image Backup. It will create discs for windows 8.1. And I will able to restore system to windows
8.1 by these discs. And for windows 8 I have already discs. But these discs will only work by changing boot options(by choosing UEFI) and image recovery. And reset and refresh functions will not work then in such situation factory recovery partition
will become useless. Then such situation I should delete factory recovery partition as it is useless.
8. At beginnign I also tried AI recovery burner. After trying it for 2-3 days I came to know that AI recovery burner is not for windows 8. There should be a tutorial for these thing so that people like me not waste their time.

I used a software named UNDELETE on my hidden recovery partition to recover it. I get some files by this software. Important thing is that I got a 2.84 GB file named 00eebc9d.rb in dir D:\recovered1\Files Detected by their Signatures\Unknown Application\.rb.
This file may be useful. Please suggest me how can I use these files to reset and refresh my OS. I used some dir commands as follows to get list of these files:
dir /s >f:\list.txt
dir /s /a:s >f:\list2.txt
Some files were system files so these file were not shown by first dir command. So I used second dir command.
Output of dir /s >f:\list.txt
Volume in drive D is DATA
Volume Serial Number is 9A82-D42B
Directory of D:\recovered1
29-07-2014 19:08 <DIR> .
29-07-2014 19:08 <DIR> ..
29-07-2014 19:08 <DIR> $Extend
29-07-2014 19:06 <DIR> Files Detected by their Signatures
29-07-2014 19:06 <DIR> Recovery
29-07-2014 19:08 <DIR> System Volume Information
0 File(s) 0 bytes
Directory of D:\recovered1\$Extend
29-07-2014 19:08 <DIR> .
29-07-2014 19:08 <DIR> ..
29-07-2014 19:08 <DIR> $RmMetadata
0 File(s) 0 bytes
Directory of D:\recovered1\$Extend\$RmMetadata
29-07-2014 19:08 <DIR> .
29-07-2014 19:08 <DIR> ..
29-07-2014 19:08 <DIR> $TxfLog
0 File(s) 0 bytes
Directory of D:\recovered1\$Extend\$RmMetadata\$TxfLog
29-07-2014 19:08 <DIR> .
29-07-2014 19:08 <DIR> ..
29-07-2014 17:36 65,536 $TxfLog.blf
29-07-2014 17:36 10,485,760 $TxfLogContainer00000000000000000001
18-04-2014 00:18 10,485,760 $TxfLogContainer00000000000000000002
3 File(s) 21,037,056 bytes
Directory of D:\recovered1\Files Detected by their Signatures
29-07-2014 19:06 <DIR> .
29-07-2014 19:06 <DIR> ..
29-07-2014 19:05 <DIR> Firefox
29-07-2014 19:05 <DIR> Internet Explorer
29-07-2014 19:05 <DIR> Pick an app
29-07-2014 19:05 <DIR> Unkown Application
29-07-2014 19:06 <DIR> Windows Photo Viewer
0 File(s) 0 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Firefox
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 19:05 <DIR> .xml
0 File(s) 0 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Firefox\.xml
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 18:59 1,091 00000150.xml
29-07-2014 18:59 1,336 005f05b0.xml
29-07-2014 18:59 1,091 005f05b8.xml
29-07-2014 18:59 488 015c7e34.xml
29-07-2014 18:59 472 015d68fd.xml
29-07-2014 18:59 472 015d6bc3.xml
6 File(s) 4,950 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Internet Explorer
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 19:05 <DIR> .gif
0 File(s) 0 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Internet Explorer\.gif
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 19:01 2,428 003aca99.gif
29-07-2014 19:01 814 0047c75d.gif
29-07-2014 19:01 472 00b2846d.gif
3 File(s) 3,714 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Pick an app
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 19:05 <DIR> .cab
29-07-2014 19:05 <DIR> .ico
0 File(s) 0 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Pick an app\.cab
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 18:59 17,317,845 000c98e2.cab
29-07-2014 18:59 92,631,005 0027defd.cab
29-07-2014 18:59 7,539 00334cf3.cab
29-07-2014 18:59 15,731 0066bf8e.cab
4 File(s) 109,972,120 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Pick an app\.ico
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 18:59 4,534 0027d8d6.ico
29-07-2014 18:59 4,534 0027d8df.ico
29-07-2014 18:59 766 0027d8eb.ico
29-07-2014 18:59 766 0027d8ee.ico
29-07-2014 18:59 766 0027d8f2.ico
29-07-2014 18:59 4,534 0027dbef.ico
29-07-2014 18:59 10,134 0027dbfb.ico
7 File(s) 26,034 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Unkown Application
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 19:05 <DIR> .ogg
29-07-2014 19:05 <DIR> .rb
0 File(s) 0 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Unkown Application\.ogg
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 18:59 194,667 00369b71.ogg
29-07-2014 18:59 173,149 0036b2a1.ogg
29-07-2014 18:59 13,178 0036b527.ogg
29-07-2014 18:59 19,244 0036e009.ogg
29-07-2014 18:59 169,220 0036e18a.ogg
29-07-2014 18:59 114,800 0036f031.ogg
29-07-2014 18:59 22,325 0037003d.ogg
29-07-2014 18:59 42,628 003703fd.ogg
29-07-2014 18:59 319,493 00370bc2.ogg
29-07-2014 18:59 68,812 00373cfa.ogg
29-07-2014 18:59 89,541 00373e29.ogg
29-07-2014 18:59 65,697 00375384.ogg
29-07-2014 18:59 42,955 00376d11.ogg
29-07-2014 18:59 85,254 0037847f.ogg
14 File(s) 1,420,963 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Unkown Application\.rb
29-07-2014 19:05 <DIR> .
29-07-2014 19:05 <DIR> ..
29-07-2014 19:01 3,058,238,593 00eebc9d.rb
1 File(s) 3,058,238,593 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Windows Photo Viewer
29-07-2014 19:06 <DIR> .
29-07-2014 19:06 <DIR> ..
29-07-2014 19:06 <DIR> .jpg
29-07-2014 19:06 <DIR> .png
0 File(s) 0 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Windows Photo Viewer\.jpg
29-07-2014 19:06 <DIR> .
29-07-2014 19:06 <DIR> ..
29-07-2014 18:59 12,296 0027dbce.jpg
29-07-2014 18:59 41,093 003933da.jpg
29-07-2014 18:59 25,067 00396fae.jpg
29-07-2014 18:59 2,303 003c5891.jpg
4 File(s) 80,759 bytes
Directory of D:\recovered1\Files Detected by their Signatures\Windows Photo Viewer\.png
29-07-2014 19:06 <DIR> .
29-07-2014 19:06 <DIR> ..
29-07-2014 18:59 64,902 0035b639.png
29-07-2014 18:59 530 0039c185.png
29-07-2014 18:59 556 003be59e.png
29-07-2014 18:59 1,023 003ed468.png
29-07-2014 18:59 1,704 003f1ec0.png
29-07-2014 18:59 624 003f252a.png
29-07-2014 18:59 13,777 0043a2c0.png
29-07-2014 18:59 2,897 00441e87.png
29-07-2014 18:59 2,915 00442a6c.png
29-07-2014 18:59 2,973 00442b91.png
29-07-2014 18:59 468 004433ca.png
29-07-2014 18:59 363 00443501.png
29-07-2014 18:59 238 00443be0.png
29-07-2014 18:59 331 00443fd9.png
29-07-2014 18:59 457 004442ad.png
29-07-2014 18:59 2,868 004444a7.png
29-07-2014 18:59 268 004446af.png
29-07-2014 18:59 280 004448d1.png
29-07-2014 18:59 257 004449f1.png
29-07-2014 18:59 2,158 00b962d1.png
29-07-2014 18:59 54,191 016a8a54.png
29-07-2014 18:59 4,224 017350e3.png
29-07-2014 18:59 4,241 01735f08.png
23 File(s) 162,245 bytes
Directory of D:\recovered1\Recovery
29-07-2014 19:06 <DIR> .
29-07-2014 19:06 <DIR> ..
29-07-2014 19:08 <DIR> Logs
29-07-2014 19:08 <DIR> WindowsRE
0 File(s) 0 bytes
Directory of D:\recovered1\Recovery\Logs
29-07-2014 19:08 <DIR> .
29-07-2014 19:08 <DIR> ..
0 File(s) 0 bytes
Directory of D:\recovered1\Recovery\WindowsRE
29-07-2014 19:08 <DIR> .
29-07-2014 19:08 <DIR> ..
0 File(s) 0 bytes
Directory of D:\recovered1\System Volume Information
29-07-2014 19:08 <DIR> .
29-07-2014 19:08 <DIR> ..
0 File(s) 0 bytes
Total Files Listed:
65 File(s) 3,190,946,434 bytes
65 Dir(s) 178,172,325,888 bytes free
dir /s /a:s >f:\list2.txt
Volume in drive D is DATA
Volume Serial Number is 9A82-D42B
Directory of D:\recovered1
17-04-2014 23:37 2,560 $AttrDef
17-04-2014 23:37 0 $BadClus
17-04-2014 23:37 655,680 $Bitmap
17-04-2014 23:37 8,192 $Boot
17-04-2014 23:37 67,108,864 $LogFile
17-04-2014 23:37 262,144 $MFT
17-04-2014 23:37 4,096 $MFTMirr
17-04-2014 23:37 0 $Secure
17-04-2014 23:37 131,072 $UpCase
17-04-2014 23:37 0 $Volume
10 File(s) 68,172,608 bytes
Directory of D:\recovered1\$Extend
17-04-2014 23:37 0 $ObjId
17-04-2014 23:37 0 $Quota
17-04-2014 23:37 0 $Reparse
01-05-2014 09:24 0 $UsnJrnl
4 File(s) 0 bytes
Directory of D:\recovered1\$Extend\$RmMetadata
17-04-2014 23:37 0 $Repair
1 File(s) 0 bytes
Directory of D:\recovered1\$Extend\$RmMetadata\$TxfLog
17-04-2014 23:37 100 $Tops
1 File(s) 100 bytes
Directory of D:\recovered1\Recovery\Logs
30-04-2014 06:12 1,336 Reload.xml
1 File(s) 1,336 bytes
Directory of D:\recovered1\Recovery\WindowsRE
18-06-2013 20:38 3,170,304 boot.sdi
29-04-2014 17:13 1,091 ReAgent.xml
26-04-2014 23:06 255,077,005 Winre.wim
3 File(s) 258,248,400 bytes
Directory of D:\recovered1\System Volume Information
18-04-2014 00:19 20,480 tracking.log
1 File(s) 20,480 bytes
Total Files Listed:
21 File(s) 326,442,924 bytes
0 Dir(s) 178,172,325,888 bytes free
Kindly guide me how can I use my hidden recovery partition to reset and refresh by use of these files.

How do I install a Lion Recovery Partition

I recently installed a new Hard Drive in my Early 2011 Macbook Pro, and I was wondering if there was any way I could out the Lion Recovery Partion on it.
Thanks In Advance

CCC Carbon Copy Cloner has a utility called "Disk Center" that is included with CCC that will create a Recovery Partition for you. I understand that CCC is not free, but it does have a free 30 day trial.
The "Disk Center" in CCC Carbon Copy Cloner is not obvious or easy to find, unless you know where to look for it (in the Window menu pulldown)... it's easy to miss. Once you find it in the CCC menu system, it is a quick (<5min) turnkey way to create a Recovery HD Partition on any disk, internal or external.
I thought I should share this, since I burned several hours of pain-staking research and experimentation in search of how to create/re-create a "Recovery HD" Partition for my MacBook Retina Mavericks laptop. My journey was varietal, including:
Successfully using a manual set of instructions with Terminal to execute a multi-step approach that worked ( http://www.macworld.com/article/2056561/how-to-make-a-bootable-mavericks-install -drive.html )
As well as a utility from musings.slivertooth.us that worked for me as advertised. Only problem is that while I appreciate and respect the great utility that guy created, my risk-averse nature prevents me from using a non-commercial utility to muck with the low-level details of my boot drive. Great job, but I prefer CCC since it's backed by a commercial SW company. Here's his great uility, as referenced in Apple discussion threads like this one: ( http://musings.silvertooth.us/2012/03/restoring-a-lost-recovery-partition-in-lio n/ )
Therefore, I was relieved to discover that CCC has a utility specifically designed to do this for me.
FYI: How did I find myself in this position? I lost my Recovery HD partition because I used Super Duper to Clone my HD/SSD, and subsequently restored my MacBook at one point. Super Duper has worked awesomely well for me for several years. It clones HDs/SSDs without a glitch, and makes them bootable automatically. The only gap or lack of function I have discovered is that "Super Duper" does not Clone the "Recovery HD" Partition. CCC Carbon Copy Cloner does. So, while I like Super Duper, I'm switching to CCC Carbon Copy Cloner for my backups from now on.
Disclaimer: I don't work for CCC. I'm just an I/T Professional that needed to figure out how to create/re-create a Recovery HD Partition...

Can't boot from recovery partition in Mountain Lion

I've installed Mountain Lion on two different boxes so far: a 20" iMac at home and a Mac Mini at work. Both had up to date Lion installations prior to the upgrade. After installing Mountain Lion I am not able to boot in to the recovery partition on either one. Whether I hold down Command-R to go directly to the recovery parittion, or simply hold down Option to get a choice of boot devices, I am taken directly to the login screen.
The recovery partition is there on both boxes, and I can mount it and examine it using 'diskutil' from the command line. I created a USB image of the recovery partition on the iMac, and the Startup Disk control panel allowed be to select it as a boot device, but the box (both boxes, actually; I also tried it on the Mini) booted directly to the login screen.
I honestly don't know whether I could boot to the recovery partition prior to upgrading to Mountatin Lion or not. When I first installed Lion on the iMac I did not get a recovery paritition, but Apple sent me a USB drive and after cleaning up the disk (getting rid of an unused Boot Camp partition) I was able to get a clean install with a functioning recovery paritition. However I never booted from it after confirming that it worked.
Anyone else see anything like this? Or have an idea how to fix it?
- Larry

Ok but you can get the Option key to work.
There is a utility to Rebuild the recovery HD partition.
Look here first.
Removing and rebuilding a malfunctioning Recovery HD partition « Der Flounder
Then in that article a link to download or find the Recovery HD utility on the Apple website.
But that was originally for Lion. So you may have to rebuild the Lion R-HD then Reinstall Mt Lion over the top of your current install of Mt Lion for it to make the Mt Lion R-HD.
Depending on the age of your Mac's you may also be able to use the Online (Internet) Recovery HD system. To get to that with a R-HD partition on the system, even if that R-HD partition sin't working, you hold down Command+Option+r keys when starting the system (And yes with the USB keyboard attached).

How can I see the files in the Recovery partition folders? Explorer won't let me.

I am preparing to do a clean install of Windows 7 onto a hard drive that shipped with Vista Home and the Recovery partition. I want to reuse the recovery tools along with Windows 7 in the recovery partition. Windows Explorer won't display the contents of the recovery folders. How can I overcome this?
Thanks,
Luke

Force it into recovery mode to restore it as explained here: If you can't update or restore your iPhone, iPad, or iPod touch. Sometimes you have to do this more than once to be successful. After restoring, you'll have to restore an existing backup, if you have one.

Re: Unable to use the recovery partition on Satellite L505D

Hello.
I am trying to help a friend with their Satellite L505D that had a serious virus issue(s). I was not able to run/install any programs with the virus on it. I used a Microsoft tool to remove the rootkit trojan, but I still had virus issues. I also lost most of the programs on the machine. All the folders were empty (except for some games), so I could not access any tools that way. I could not get the machine to load any Toshiba restore utility by pressing Zero while powering on. I accessed some recovery options using F8 during bootup, and had a link to restore to Toshiba's original setting, but clicking that choice did nothing other than pause for a few seconds. I waited several minutes, clicked it again, rebooted and tried again. Nothing. As a side note, once during all this, the restore partition was visible from explorer.exe. Not before, or since.
So I then Reformated the computer with a Win7 Home Premium 64bit upgrade disk (leaving the restore partition intact), and entered the key for the system. Supprise supprise, it is asking me to activate within 3 days.
My basic question is, can I access that recovery partition in a different manner to attempt to use it? IE copy it's contents, or boot to some comand prompt to log to e:?
Thank you in advance for any suggestions.

> Is a recovery disk from another computer using Win7 Home Premium 64-bit usable?
Generally speaking yes BUT this second notebook must be 100% identical with same model number (PAxxxx).
> Or if not, am I left with either ordering recovery media from Toshiba, or wiping the entire HDD and installing another licensed version of Win7?
Exactly. To be honest better option is to order original Toshiba recovery disc.
You can order it under https://backupmedia.toshiba.eu/landing.aspx
For 30 euro you will have original disc that you can use anytime you want. This disc has OS with valid licence, all necessary drivers.
It is also simplest way to have all properly installed. With 5 mouse clicks and after 2 hours only notebook will have factory settings again.

Recovery partition disappeared

Similar Messages

Maybe you are looking for