Recovery partition has been removed

Hi sir
 I recently purchased a HP pavilion g-1202 TX series, I have installed Windows 7 64-bit OS, I found that I had only single drive i.e. C: for use, thought of creating another partition and shrunk the C drive, after this I found that HP RECOVERY MANAGER SAYS "Recovery partition has been removed - the recovery media creation option is no longer available"
Then again I tried expanding the C: drive back to its old stage, even then I found the same error, Now how can I get back HP RECOVERY.? and create Recovery Partition?

if you havent created the recovery media already from your computer, there is only option to get media from HP.
contact HP to order Recovery media. in most countries you can order it online, else contact HP phone support.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bph07143
if no  option to order media for your country, contact country HP support.
visit www.hp.com and select country from the left botttom. now select contact HP or connect with HP. reach support to get a set of recovery media to make your computer recover and work as factory install.
hope it helps. Good Luck !!!
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

Similar Messages

  • "Recovery Partition has been Removed" Message in Recovery Media Creation

    HP Pavilion G4 2205tx - C5j09PA#UUF
    Windows 8 64-bit
    "Recovery Partition has been Removed" Message in Recovery Media Creation.
    i bought My new HP pavilion G4 laptop just two days ago and didnt change any thing in two Drives named Drive C: for windows  and D: for HP Recovery.
    now i want to Make a Recovery Disk with HP Recovery Manager Software.
    but it show a Massage: "Recovery Partition has been Removed" in Recovery Media Creation Section.
    in My Computer Recovery Partition is Almost Full (3.26G of 25.5G is Free) . so i think Recovery files present there .
    i haven't any Access to HP for Buy recovery disk or Call Support.
    Thanks
    This question was solved.
    View Solution.

    I don't know why your PC is saying your partition is gone - you're right, it doesn't look gone. I do know that if you use the Support Assistant to make backup copies of your Recovery Disks and Then instruct it to remove the recovery partition to give you more space on the hard drive, it will delete the HP factory image of Windows 8 from the recovery partition and leave the normal Windows repair tools behind.
    There are tools however that allow you to create your own recovery partition complete with these Windows repair tools and a new image of your instalation so you can restore from that. You could use this tool: Windows 7/8 - OEM Recovery Partition Creator found here: http://forums.mydigitallife.info/threads/21978-Win​dows-7-8-OEM-Recovery-Partition-Creator but thats a lot of work and it would be faster and easier just to backup your data and restore from your HP recovery disks you made from Support Assistant. If you didn't make the disks, HP may opt to send you a copy.. they do not normally do this but I have read that some people have good luck getting a free copy of the media from HP.. otherwise they want you to buy the recovery disks ($40.00) . I suppose it depends on the exact circunstances of your situation.
    Another solution is to use Macrium Reflect Free Edition to ghost or clone your system. You can then restore your whole system even with your custom programs installed, to the exact state it was in when you made the backup image. ( this may take several dvd's) I suggest you go this route because restoring your system with Macrium Reflect is Much faster than restoring from the HP Recovery Disks. Even if you do obtain another copy of the Recovery Disks, you should use this tool to make another backup that you can customize to your liking. Your re-installs will be faster, they will already have your chosen software installed, and you will save wear and tear on your HP Recovery Disks.  You can then safely delete the recovery partition to gain back that space on your hard drive (since you cannot access it anyway, you won't need that space being taken up).  BUT.. you cannot restore from UEFI Mode which is what HP ships with. You have to go into your Bios settings, and switch to Legacy Bios mode, (which disables Secure Boot) FIRST or else the Macruim recovery boot disk will not load to install the recovery image. After the system re-installs you can go back into bios settings and disable Legacy bios and re-enable secure Boot if you like. ( Windows 8 will load in both UEFI mode with secure boot enabled or Legacy bios mode.. it's your choice. UEFI mode will load faster but it will cause problems if you want to dual boot the system with another OS)  Hope this helps.

  • Recovery drive has been removed

    hi
    i have a pavilion dv6 - 2140se
    my  recovery partition has been removed
    i want buy and download it
    please help me

    Here are the specs for your HP Pavilion dv6-2140se Entertainment Notebook Computer. Sorry, but HP can't and/or doesn't make Recovery images available for download. Please contact HP, in your region / country, via the HP Worldwide Support Portal to check on the availability of HP Recovery Discs for your computer.
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • SL500, Product recovery function has been removed from this sytem

    I upgraded my SL500 from Vista to windows 7 OS several years ago and lately the OS has been acting weird (freezing, very slow at times) so I am thinking something is corrupted somewhere and want to restore it back to the manufacturers state.  However, when I try to do this through rescue and recovery, it tells me that the recovery function has been removed from the system.  I'm assuming that when I upgraded from Vista that R&R was no longer compatible so I installed version 4.5.  My laptop did not come with backup OS disks and was told that this was the way to restore the system back to the factory state.  How do I do this if I'm getting this message?

    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62978
    try this. If this don't work then you would to reinstall the OS using the T43 recovery media disk set. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Recovery partion has been removed...help!!!

    i have a a pavilion dv6090 laptop and i noticed that its recovery partion has been removed.i dont know how it hapend the only thing that i know is that i havent removed it myself.can anybody tell me me how to fix this problem??

    Hi,
    I've replied on your earlier thread on the link below.
    http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/recovery-partion-has-been-removed/m-p/75...
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • The Product Recovery function has been removed from this system

    I get the following error when I try full system restore - "The Product Recovery function has been reomed from this system"?
    How can I fix this?

    welcome to the forum:
    Have you made a recovery media before this problem occured??? if you haven't you may need to call Lenovo and ask for a set of recovery disks, or just use your own XP/Vista OS you got from somewhere, and load it on your machine then enter you own serial number that come with your machine.
    Then proceed to download the various softwares and drivers applicable to your machine, the most important that you won't have is the predesktop area, if you think this is unacceptable then call Lenovo and obtain recovery media from them (a nominal handling and service charge of around 50 USD will be charged).
    http://www-307.ibm.com/pc/support/site.wss/product.do?doctypeind=9&template=%2Fproductselection%2Fla...
    fill in the detail and download away.

  • Recovery Partition has been deleted.

    Is there a way to format my computer without this partition? Is there a way to recover this partition?

    Satellite C655-S5514
    If you have failed to burn recovery discs, you can obtain them from Toshiba.
       Get Recovery Media
    For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 76 of the User's Guide.
       Satellite/Satellite Pro C600 Series User’s Guide
    -Jerry

  • The recovery partition from my hp presario cq50 104ca notebook has been removed, if you are able to

    Hi to all
    Assume that the recovery partition from my hp cq50 104ca has been removed because in the past many times, I could reset back to factory setting, just by holding down alt and control and  f11 by starting point. But now since few weeks can not do it. If you are able to assist me with that issue however.
    Thank you in advance
    Munir

    Hi Munir,
    If you have created your set of Recovery Discs, you can use these to reinstall the operating system - this procedure will also re-create the Recovery Partition on the Hard Drive.
    If you don't have these discs, you can order a replacement set of Recovery Discs using the link below.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
    If you have any problem with this link, order them directly from HP.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to show a row has been "removed" from a table

    We maintain rows in a table with a version number which will determine the current set of accounts for a version. I need to be able to show the changes between the versions - when a row was ADDED, REMOVED or there was NO CHANGE. I can work out ADDED and NO_CHANGE without any problem, but I'm not sure how I can determine that a row has been REMOVED when it no longer exists in the next version.
    I have provided an example piece of SQL below:
    with w_acct1 as
    (select 'A1' acct, 0 vers from dual
    union all
    select 'A2' acct, 0 vers from dual
    union all
    select 'A3' acct, 0 vers from dual
    union all
    select 'A1' acct, 1 vers from dual
    union all
    select 'A2' acct, 1 vers from dual
    union all
    select 'A1' acct, 2 vers from dual
    union all
    select 'A4' acct, 2 vers from dual)
    select a.*,
           nvl(lead(acct) over (partition by acct order by vers desc),'NULL') ld,
           case when lead(acct) over (partition by acct order by vers desc) is null then
                   'ADDED'
               when lead(acct) over (partition by acct order by vers desc) = acct then
                   'NO_CHANGE'
               else
                   'REMOVED'
               end add_remove
    from w_acct1 a
    order by vers,acctWhich gives me the following result:
    ACCT VERS LD ADD_REMOVE
    A1     0     NULL     NEW
    A2     0     NULL     NEW
    A3     0     NULL     NEW
    A1     1     A1     NO_CHANGE
    A2     1     A2     NO_CHANGE
    A1     2     A1     NO_CHANGE
    A4     2     NULL     NEW
    The result I want is:
    ACCT VERS LD ADD_REMOVE
    A1     0     NULL     NEW
    A2     0     NULL     NEW
    A3     0     NULL     NEW
    A1     1     A1     NO_CHANGE
    A2     1     A2     NO_CHANGE
    A3     1     NULL     REMOVED
    A1     2     A1     NO_CHANGE
    A2     2     NULL     REMOVED
    A4     2     NULL     NEW
    Note the REMOVED rows associated with the version even though they don't exist in the dataset for that version number.
    Can this be done with analytic functions or some other cool Oracle feature I'm missing?
    Regards
    Richard

    You can't know about a row being removed unless you have a record of that row somewhere, either as a copy of your old data (see example below) or you've recorded the information using delete triggers etc.
    SQL> ed
    Wrote file afiedt.buf
      1  with old_data as (select 1 as id, 'A' as dta from dual union all
      2                     select 2, 'B' from dual union all
      3                     select 3, 'C' from dual)
      4      ,new_data as (select 1 as id, 'A' as dta from dual union all
      5                    select 3, 'X' from dual union all
      6                    select 4, 'Y' from dual)
      7  --
      8      ,ins_upd as (select * from new_data minus select * from old_data)
      9      ,del_upd as (select * from old_data minus select * from new_data)
    10      ,upd as (select id from ins_upd intersect select id from del_upd)
    11      ,ins as (select id from ins_upd minus select id from upd)
    12      ,del as (select id from del_upd minus select id from upd)
    13  --
    14  select 'Inserted' as action, null as old_id, null as old_dta, new_data.id as new_id, new_data.dta as new_dta
    15  from new_data join ins on (ins.id = new_data.id)
    16  union all
    17  select 'Updated', old_data.id, old_data.dta, new_data.id, new_data.dta
    18  from old_data join new_data on (old_data.id = new_data.id)
    19                join upd on (upd.id = new_data.id)
    20  union all
    21  select 'Deleted', old_data.id as old_id, old_data.dta as old_dta, null as new_id, null as new_dta
    22  from old_data join del on (del.id = old_data.id)
    23  union all
    24  select 'No Change' as action, new_data.id as old_id, new_data.dta as old_dta, new_data.id as new_id, new_data.dta as new_dta
    25  from new_data where id not in (select id from ins_upd union all
    26*                                select id from del_upd)
    SQL> /
    ACTION        OLD_ID O     NEW_ID N
    Inserted                        4 Y
    Updated            3 C          3 X
    Deleted            2 B
    No Change          1 A          1 A
    SQL>

  • How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance

    How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance downloading it again, especially because (believe it or not) I added it to my phone because that's precisely where I wanted it!! Any help much appreciated

    FYI I had to put this link into firefox to reply - because **** back safari just wouldn't register my clicks to any of the links on the post... Despite reloadeing and even restarting my computer. Totally annoying and a massive pain in the ***.
    But in terms of my initial query; thanks for responding. But no, this is NOT the cause of the problem. I have auto sync and sync over wifi activated, but have also selected manually manage music and videos. Plus, all of my music and videos are on my macbook, absolutely all of it, so if it my phone was syncing with my macbook everything would still be on the phone. Life would be peachy if my phone jsut copied everything that was on my macbook, but unfortuantely it keeps deleting tracks for no apparent reason.
    Any thoughts greatly welcomed, because at the moment i can only conclude that my iphone is crap.

  • How to show all items in the reading list? I think this option has been removed in Safari Version 7.0.2

    How to show all items in the reading list? I think this option has been removed in Safari Version 7.0.2

    Thanks. That solved it. I had my doubts since I wasn't concerned about my lost bookmarks. I was concerned about the broken functionality. In any event, restoring from a backup solved both the functionality and the lost bookmarks. I appreciate the response!

  • Goods receipt when PO creator has been removed from org structure ?

    Hello in my organisational structure PPOMA_BBP, i have 2 users, X and Y.
    X has created a PO in the SRM portal.However , X has been removed from the org. structure.
    Is it possible for Y to make the goods recept( that is , Y logs in the portal and makes the goods receipt) ?

    Hi
    Did you try to delete the user ? Did you get any error message?
    Note 1148837 - SRM user cannot be deleted
    When trying to delete an SRM user the system will check if there are still
    related SRM documents in the system. If there are active documents in the
    system the deletion is not possible. This is the correct system behaviour.
    But even if all related SRM documents are archived the deletion is
    sometimes not possible, because there are residual entries in table
    CRMD_PARTNER linked to this user.
    More Terms
    User crmd_partner residual entries deletion active document
    Cause and Prerequisites
    Solution
    The attached report PARTNER_SET_DELETE will display in simulation mode all
    residual entries in table crmd_partner with invalid item or header links
    and in non simulation mode it will delete the corresponding crmd_partner
    entries.
    Header Data
    Release Status: Released for Customer
    Released on: 10.03.2008 11:54:37
    Priority: Correction with low priority
    Category: Help for error analysis
    Main Component SRM-EBP-PD Procurement Document Methods
    Additional Components:
    SRM-EBP-ADM-USR SRM User Administration
    Valid Releases
    Software Component Release From
    Release
    To Release and Following
    SRM_SERVER 500 500 500
    SRM_SERVER 550 550 550
    Support Packages
    Support Packages Release Package Name
    SRM_SERVER 500 SAPKIBKS14
    SRM_SERVER 550 SAPKIBKT12
    Correction Instructions
    Ref note 550071 too..
    regards
    Muthu

  • When I back up my  I phone 5s or my ipad2 camera roll, contacts and documents does this save in the cloud all to view even if a photo has been removed from camera roll?

    When I back up my  I phone 5s or my ipad2 camera roll, contacts and documents does this save in the cloud all to view even if a photo has been removed from camera roll?

    iCloud- Photo Stream FAQ
    iCloud- Photo Stream limits
    iCloud- How to delete photos from Photo Stream
    iCloud- Photo Stream troubleshooting
    iCloud- Using and troubleshooting Shared Photo Streams
    iPhoto '11- Add, remove, and edit photos in a shared photo stream
    iPhoto '11- Create a shared photo stream
    There are obviously limits to what can be stored in Photo Stream and for how long.
    If she wants backups then she will need something like this: Seagate Wireless Plus.

  • In Lion the command to back up library to disc has been removed? How do I do this now?

    In Lion the command to back up library to disc has been removed? How do I do this now? Apple Support has given me a case number and accelerated it with a call back in a few days, and even the techs were surprised by the removal of the ability to incrementally back up to any kind of disc any items added to the iTunes Library since it's last back up.
    While this command was in all previous iterations of iTunes, even most of the techs are working from iTunes 10.3, the Lion version has this removed. Help only mentions Time Machine as the back up method. Sorry, I've had too many hard drives go bad, and not one DVD or CD has failed when I needed to retrieve a past purchase or addition of any kind to the iTunes library.
    Purchasing from the iTunes store just got less viable, IMHO.

    Dave-
    Thanks for the feedback. Those nasty old deprecated features, eh? Seems you are correct that it will now be a third party solution.
    I just finished chatting with Mike Bombich about using his Carbon Copy Cloner 3.4.1 ( http://www.bombich.com/index.html ) to do the job.
    He gave me a rough outline of how to set it up for incremental back up of iTunes ~/Music/iTunes or
    ~/Music/iTunes Music. Creating filters ( http://help.bombich.com/kb/explore/excluding-files-and-folders-from-a-backup-tas k#creating ) tells how to create and save different tasks.
    I'l check it out and report back shortly.

  • New Photo in OS X option to edit photo with external editor such as Photoshop has been removed. will this be back!

    Hi
    I have just updated my iPhoto to Photos in OS X and i have noticed that the option to edit photo with external editor such as Photoshop has been removed. will this be back!
    Its now a pain to send a photo directly to my favourite photo editing software.
    Ross

    Thanks Terence
    Totally understand being a new app and not an update.
    So i'm a ammeter photographer and i like the way i can view my photos in iPhoto and i'm happy with the new App for this also, however i like to edit my photos in PS from time to time and i shoot in raw. As i can no longer select edit in external editor from the photo app i tired to drag a RAW photo to PS but this didn't work. i then tried dragging to desktop but this then made a jpeg so i loose my raw advantage. I would like to be able to find my original raw photos easily so i can edit them in PS.
    Hope that makes sense?
    Ross

Maybe you are looking for

  • Unable to log on with apple ID - error message "an unknown error has occurred"

    When I try and log on to apple website using my apple ID, I get an error message saying "an unknown error has occurred".  How can I fix this? I've changed my password several times and was able to successfully make a purchase from Itunes using new pa

  • To create purchase requisition with item cat L through mrp

    dear all,            when ever i m running mrp a pur req is created but my requirement is to create a pur req with item cat L. even i m unable to change the item cat of pur req while editing it so pls tell me how to config to create pur req with item

  • Intelligent Print Widget not compatible with Adobe Captivate 7?

    HI, I took a file I developed with CP6 that has the Intelligent Print Widget on the Quiz Results pages into CP7. When I publish the file, I don't see the print widget. I even ensured the swf file is there in the zipped package but still no print butt

  • Photo Orientation in Referenced Aperture Library

    I am taking my Managed Aperture Library and moving it to Referenced. As I do so, I am noticing that many of the "portrait" shots in the library don't seem to maintain that orientation in the Finder. The portrait orientation shows up correctly when I

  • QuickTime file associations, TIFF in particular

    I have a user who needs to open TIFF's in a certain program but QT keeps hijacking the file association in IE6 on Windows XP sp2. When he opens a TIFF file via IE6 or MS Word (impeded in IE6) it opens in QuickTime which can only view the 1st page of