Recovery problem for V200

I use the full factor recovery for my V200 Notebook... However, It non-stop restart the window loading page...... Welcome, shutting down, logging off and restart....... How can I fix this problem?

Press F8 after BIOS screen, choose "disable automatic reboot on system fail", "Enter", "Enter". After crash write down the error code and post it here please.
Also try "last known good configuration" in the same menu. May help.
//help will save the world

Similar Messages

Corrupted regsutry recovery problems for Windows XP on system restore

Hi. Had a spyware (Trojan) killed by the virus cleaner but upon restart it gave me a famous lsass.exe error about an application, which could not be terminated. Went on and read http://support.microsoft.com/kb/307545 but when tried to start recovery from Windows XP CD-ROM, the command "copy c:\windows\repair\system c:\windows\system32\config\system" did not work. Eventually was able to load the system from the CD-ROM but then could not pass part 2 (safe mode after rebooting) as the administrator password has been changed. I have run NT Password and Registry Bootdisk from USB to remove the administrator password but when tried go back to recovery console from Windows XP CD-ROM, the computer powers off right before I select "R"-option to start the recovery console. When I do not use the CD-ROM and try to power on in a safe mode, it gives BSOD. How do I get to corrupted registry if I cant get to recovery console and system restore?
Any help is appreciated. I have run a system diagnostics and start-up test has passed but on hard disk test I get to 10% of comprehensive only and then it seems to take indefinite.
This question was solved.
View Solution.

How to do a Manual SYSTEM RESTORE in XP, this should fix the missing or corrupt config file.
A. Connect your non-bootable hard drive to another computer, as a secondary drive or use a usb adapter or enclosure, If you can see your data on the drive, back it up Now, then follow the rest of these instructions.
B. Open Windows Explorer. Click on Tools|Folder Options|View. Check the box beside "Show hidden files and folders". Apply your change.
NOTE
D: may not represent the hard drive you connected to your PC, it may be E: or F: or G:, it all depends on how many other drives (including cd/dvd) you have in your host PC, So substitute the appropriate drive letter in the instructions below.
C. Navigate to the D:\System Volume Information folder. You will see a folder named something like _restore{.........} the dots represent an alpha-numeric sequence.
In this folder you will see folders named RP0....RPnn. Find the one with the highest number.
These are your System Restore points. In the highest numbered folder you will see a folder named snapshot. In this folder are registry hive files which you need to recover your system:
_registry_user_.default
_registry_machine_security
_registry_machine_software
_registry_machine_system
_registry_machine_sam
D. Create a subdirectory; i.e, D:\Windows\TMP. Copy these files to the TMP subdirectory. Rename them to:
default
security
software
system
sam
Note Be sure to lose the period (.) in the file named _registry_user_.default
E. Delete the files in the D:\windows\system32\config subdirectory with the same short names.
F. Copy the D:\windows\tmp files to the D:\windows\system32\config. subdirectory.
G.Put your drive back in its original system. Your system should start normally. If you get the same error repeat the procedure and choose another folder ( RPnn) (next highest number).
You can repeat this procedure choosing lower RPnn numbers until you get it booting again.
If you are denied access to any folders you will have to take "Ownership" of the folders first. http://support.microsoft.com/kb/308421
If this procedure fails to work you need to repair or reinstall Windows.

Troubleshooting System Recovery Problems

A System Recovery is a useful tool to return your Windows 8 tablet back to factory defaults. However, what do you do when the System Recovery isn't working!?
A full System Recovery can be a lengthy process as there is a lot of data being transferred. Patience is the key, as a full Recovery can take two to four hours to complete.
For more information check out HP's Troubleshooting HP System Recovery Problems for Windows 8. This document will help you get your Windows 8 tablet back up and running.
TIP: If you are planning on using the System Recovery make sure that you do not change or delete the HP Recovery Partition as that will make all but impossible to Restore your tablet using the HP Recovery Manager.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Have you created this disc on your own or you use original toshiba disc?
Do you use it for the first time?

Are there any recovery tools for optical media?

I've had a couple of DVD's turned in to coasters recently and I was hoping that Linux could come to my rescue with some awesome 'raw-read' / recovery tools for optical media?
I burnt the discs in Windows 7 using InfraRecorder on a brand new Plextor drive (a 'PX-891SA') and these are my first attempts to burn discs with it so I'm a bit worried it could be a hardware fault!
I started off trying to back up some files to clear some space on my hard-drive, burning them to a dual-layer dvd, but the software kept failing to even start the burn process -- that was until I realised that I needed to run the program "as Administrator" (in Windows). It did then manage to burn the disc (I was using "Session-at-Once" mode) however when it came to the end of the burn process / the start of the 'verify data' phase it threw an error saying the write process had failed! Windows couldn't access the disc / data and (I think) still thought the disk was empty. So I restarted the burning application and used a function to just 'close' the whole disc. This seemed to work because Windows was then able to recognise the disc and read the data, although accessing the disc was slow and sounded 'stutter' ish.
I then tried to write a single layer dvd to finish off the last couple of gig I had to back up, but again the software completed the burn phase only to report a 'fail' error right at the end (I'm assuming) before finalising the disc. Although this time I'd tried to create a multi-session disc by using the '2XXA' (or something) 'Multi-Session' iso9660 format. The result was that Windows couldn't read the disc and still thought it was empty, even after trying a forced 'close disc' operation! -- Linux however could read the disc and see that the data had in fact been burnt to the disc (although I've not yet tried copying it in Linux!).
Finally I needed to burn a load of archives to a couple of discs (totaling ~9GiB) -- starting with a dual-layer dvd first everything seemed to be working fine, the burn process started okay and the write buffer was full etc., until at what I assume was the layer change-over it all came to a grinding halt and threw another 'write operation failed' error, only this time I can't even mount the disk in Linux....see 'dmesg | tail' output below:
[ 5758.353005] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5758.353015] ISOFS: Interleaved files not (yet) supported.
[ 5758.353016] ISOFS: File unit size != 0 for ISO file (1472).
[ 5758.353019] ISOFS: changing to secondary root
[ 5758.353035] ISOFS: Interleaved files not (yet) supported.
[ 5758.353036] ISOFS: File unit size != 0 for ISO file (1536).
[ 5758.353037] isofs_fill_super: root inode is not a directory. Corrupted media?
Does anyone have any thought or suggestions that might help?
- Is it likely to be a hardware fault? (I bought a Plextor because I thought they were one of the best!)
Maybe even if I could just close the session all would not be lost?
-- Thanks in advance --
>>>> UPDATE >>>>
I tried to use ddrescue....it was fine until it got to the end of the disk and then it sounded like the drive was chewing on a bag of pork scratchings
$ sudo ddrescue -v /dev/sr0 /mnt/odd/ddr.file ~/ddr.log
GNU ddrescue 1.16
About to copy 4029 MBytes from /dev/sr0 to /mnt/odd/ddr.file
Starting positions: infile = 0 B, outfile = 0 B
Copy block size: 128 sectors Initial skip size: 128 sectors
Sector size: 512 Bytes
Press Ctrl-C to interrupt
rescued: 4028 MB, errsize: 983 kB, current rate: 0 B/s
ipos: 4028 MB, errors: 1, average rate: 3310 kB/s
opos: 4028 MB, time since last successful read: 10.8 m
Splitting failed blocks...
Interrupted by user
...it was taking forever and getting nowhere so I just pressed 'ctrl+c'.....here's the log file:
# Rescue Logfile. Created by GNU ddrescue version 1.16
# Command line: ddrescue -v /dev/sr0 /mnt/odd/ddr.file /home/shodan/ddr.log
# current_pos current_status
0xF0213000 /
# pos size status
0x00000000 0xF0208000 +
0xF0208000 0x0000B000 -
0xF0213000 0x0000D000 /
0xF0220000 0x00000400 -
0xF0220400 0x0001FE00 /
0xF0240200 0x00000400 -
0xF0240600 0x0003FE00 /
0xF0280400 0x00000400 -
0xF0280800 0x00077600 /
0xF02F7E00 0x00000200 -
When I tried to mount the output file using $ sudo mount -ro loop /mnt/odd/ddr.file /mnt/vodd I got the same error as with the actual disc (natch)...
mount: wrong fs type, bad option, bad superblock on /dev/loop0,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Last edited by wwgfd (2012-12-14 13:18:41)

@chris_l -- yeah I was worried that might be the case, still I'm not sure if that explains why it keeps failing the burn process part way through?
I've tried this and that in Linux but without much luck. I'm still quite a noob with a lot of Linux things and this is the first time I'm trying anything to do with optical disks/drives etc. so I'm learning as I go...
The disk that failed in Windows but was 'readable' in Linux did just pass a run through ddrescue -- i.e. it created an output file okay and did not report any errors in the process.
However when I mounted the resulting image and tried to copy the files across the first folder reported an "input/ouput error" (just using gui copy+paste in Thunar file manager)
...the other folders did copy okay though!
It seems as though it's the lead-in / lead-out and disc finalizing process that are the main fail points with the burn operation. I don't know if InfraRecorder is any good or likely to be the problem? Anyway the drive cam with Nero (inc. Linux version) so might give either or both of these a go too, if they don't work either then at least I wont be short of something to rest a mug o' tea on
@ chris_l (again) -- the Plextor drives do have a "Vari-Rec" feature which allows a user to 'tweak' the laser power / output level so I might try this too.
@alphaniner -- thanks I've not seen this package before, I'm guessing it's a bit like cdparanoia but for dvds?!
Thanks for the help!
(pre-post) UPDATE >>> I've just mounted my Windows partition in Linux so I'll have a crack at burning the files using cdrtools before I resort to throwing the dvd drive out of the window and chasing it around the yard with a lump hammer

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

System Recovery Kit for dv7-3165dx fails to restore factory image to replacement hd

I'm posting this wall of text here in case someone else has any suggestions before I contact HP Support to see what options they have.
My attempt to recover the factory image to a replacement hard drive in an HP Pavilion dv7-3165dx notebook is failing. An error occurs when SM.exe is trying to merge the WIM files. The SSRD.Log shows an error:
SM, 13, Set reference file fail
after that, SM.exe displays this message when run from a command line:
SM, Failure, Can not load imagex 1 from src WIM file
The following are the symptoms that the Recovery Manager displays on the screen.
The Recovery Manager reads the two DVDs and after a few seconds, it pops up an error message:
Reducer
C:\RM\Image\TempBASE.WIM was not found.
The message has on "OK" button that when clicked on, closes the message window.
After that, nothing happens. No disk or DVD activity for over an hour. The mouse moves, but no key presses have any effect, including CTRL-ALT-DEL. You can use the mouse to move the Recovery Manager window around, and there is nothing hidden behind it. Clicking on the Recovery Manager Back, Next, or Cancel buttons produce no response at all.
The only option at this point is to hold down the power switch until it powers down.
When the power is turned back on, the hard drive boots and Recovery Manager displays a message that incorrectly claims "Recovery is complete" and has a "Click Finish to restart" button. After clicking on "Finish", it reboots but since the System Recovery did not actually complete, all it does is display:
BOOTMGR is missing
Press CTRL+ALT+DEL to restart
Before attempting the recovery, the notebook passed all diagnostic tests.
The 2x2GB memory cards, which still have HP stickers on them, were tested with Memtest86+ V5.01 and completed over six passes in over seven hours with zero errors.
The replacement 500GB HGST Travelstar Z5K500 drive was tested with gsmartcontrol. The SMART status showed no errors in the past with over 400 hours of power-on time. Both of the SMART short self-test and extended self-test tests were run, which it passed without any errors.
The HP System Diagnostics from the Startup Menu were run on the memory and hard drive and they passed those tests without any errors.
While waiting for the HP "System Recovery Kit for Consumer Notebook (3 Disks)" Software Part Number 599357-001 to arrive, both Fedora 21 64bit and Windows Vista 64bit were successfully installed on the harddrive.
Both System Recovery DVDs were read on different machines without any errors. This System Recovery Kit supports the notebook's System Id which is 3638, so they appear to be the correct discs.
Now a list of workaround attempts that were suggested.
After the Recovery Manager failed a few times with the same error message, some googling came up with other users mentioning the "TempBASE.WIM was not found" error message. I tried these suggestions that I read about.
Run KillDisk to fill the HD with zeros.
Running Recovery Manager after that failed with the same error message.
Run the CyberLink Recovery Discs Utility (sp44645.exe).
Running Recovery Manager after that failed with the same error message.
Installed Windows VISTA 64bit again and upgraded the BIOS from F10 to F13.
Running Recovery Manager after that failed with the same error message.
Try only using a single 2GB memory card to see if it was a 64bit problem.
Running Recovery Manager after that failed with the same error message.
The BIOS does not have an option to change from AHCI mode to IDE mode.
I don't have a Windows 7 OEM install disc and am trying to avoid spending $100 to buy one.
That is when I decided that it is not a PC hardware problem, but a problem with the HP System Recovery Kit. Here are the details of what I think the Kit is doing.
After running Recovery Manager and getting the error message, instead of just re-booting and letting the "Recovery is complete" message appear, I re-booted with a Linux USB drive and inspected what was on the hard drive.
fdisk -l shows this:
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0xa5dddc41
Device Boot Start End Sectors Size Id Type
/dev/sda1 409600 143013887 142604288 68G 7 HPFS/NTFS/exFAT
/dev/sda2 * 143013888 143833087 819200 400M c W95 FAT32 (LBA)
fsarchiver probe shows this:
[======DISK=] [=============NAME====] [====SIZE==] [MAJ] [MIN]
[sda ] [HGST HTS545050A7    ] [ 465.76 GB] [ 8] [ 0]
[=====DEVICE] [==FILESYS==] [=====LABEL=] [====SIZE==] [MAJ] [MIN]
[sda1 ] [ntfs    ] [<unknown>    ] [    68.00 GB] [    8] [     1]
[sda2                 ] [vfat    ] [SDV ] [ 400.00 MB] [   8] [ 2]
Running gparted shows about 200 MB of unallocated space before the sda1 NTFS partition. The rest of the disk is unallocated after the bootable sda2.
The sda1 NTFS partition has a \SSRD.Log file and an empty \RM\Image directory.
The sda2 FAT32 partition has the Recovery Manager application files in it:
/mnt/sda2:
total 400
-rwxr-xr-x 1 root root 15 Apr 9 23:36 SDV.FLG
drwxr-xr-x 4 root root 4096 Apr 9 23:36 SYSTEM.SAV
drwxr-xr-x 3 root root 4096 Nov 1 2009 BOOT
drwxr-xr-x 3 root root 4096 Nov 1 2009 EFI
drwxr-xr-x 2 root root 4096 Nov 1 2009 SOURCES
drwxr-xr-x 3 root root 4096 Jul 27 2009 TOOL
-rwxr-xr-x 1 root root 383562 Jul 13 2009 bootmgr
The SOURCES directory has boot.wim, and the TOOL directory has all the programs, like Reducer.exe and SM.exe, in it.
After shutting down the Linux system and rebooting, the Recovery Manager then boots from sda2 and displays the "Recovery is complete" message and "Click Finish to restart" button. During this process, it removes the sda2 partition and marks the sda1 NTFS partition as the active bootable partition. When the PC restarts, all that is left is the sda1 NTFS partition with the empty C:\RM\Image directory and the SSRD.Log file, so there is no BOOTMGR to boot with.
The SSRD.Log file logs the tasks that the Recovery Manager performs.
The Recovery Manager runs some initialization tasks and then reads the two System Recovery DVDs. It then calls MergeWimFile which runs SM.exe and starts to merge BASE.WIM with the other BASE*.WIM files. SM.exe merges 20 WIM files with log entries like these:
SM, Success, refName= C:\RM\IMAGE\BASE22.WIM
SM, Success, refName= C:\RM\IMAGE\BASE23.WIM
SM, Success, refName= C:\RM\IMAGE\BASE3.WIM
SM, Success, refName= C:\RM\IMAGE\BASE4.WIM
SM, Success, refName= C:\RM\IMAGE\BASE5.WIM
SM, Success, refName= C:\RM\IMAGE\BASE6.WIM
SM, Success, refName= C:\RM\IMAGE\BASE7.WIM
Then, with only two WIM files left, BASE8.WIM and BASE9.WIM, the log shows:
SM, 13, Set reference file fail
This must be when Recovery Manager pops up the "Reducer C:\RM\Image\TempBASE.WIM was not found" error message.
That narrowed down the problem.
I copied all of the WIM files and the TOOLS directory to a Windows 8.1 system. The two DVDs did not have any errors while being read. Running SM.exe from an admin Command Prompt with the same parameters that were logged in the SSRD.Log produced the same error message. There was an additional error message that appeared in the Command Prompt window:
SM, 13, Set reference file fail
SM, Failure, Can not load imagex 1 from src WIM file
and the TempBASE.WIM was not created.
SM.exe /? did not provide a help message. I could not find any documentation on the SM.exe command.
If I removed three of the WIM files, (BASE7.WIM BASE8.WIM BASE9.WIM) then SM.exe could create the TempBASE.WIM file, but it would fail while merging index 2 of 3 with this message:
SM, 11%, Merge index 2 of 3 Processing
SM, Failed, Export image failed
The TempBASE.WIM is 3,421,518 KB in size after that.
This is where I came to a dead end and cannot think of anything else that I can do. Maybe I'm missing something obvious, but it appears to me that there was some kind of error building this System Recovery Kit and it is not able to perform a factory install on this notebook.
ps
If I can figure out how to add an attachment, I will add the SSRD.Log file. If not, then ask and I will post it as a followup.

Downloaded Windows Assessment and Deployment Kit which contains the latest imagex program.
Running imagex.exe on the BASE7.WIM file on the second System Recovery DVD:
imagex.exe /info K:\PRELOAD\BASE7.WIM
ImageX Tool for Windows
Version: 6.2.9200.16384
Error opening file [K:\PRELOAD\BASE7.WIM].
The data is invalid.
The same error message is shown for BASE7.WIM, BASE8.WIM, and BASE9.WIM.
The other WIM files in the PRELOAD directory, BASE5.WIM, BASE6.WIM, BASE10.WIM, BASE13.WIM, BASE15.WIM, BASE17.WIM and BASE23.WIM, could be read by imagex without any errors.

I need recovery media for an old Toshiba but apparently can't order it. Help!

The other day my TOSHIBA laptop - MODEL # PSM43U-01700P - must've got a virus or something because it started to slow and was unable to open some programs. Thinking the computer was about to go, i started saving my personal files onto a disk, and just after doing so the computer Blue screened and now upon start up it stops and says that it's missing a file <Windows root>\System 32\ ntoskrnl.exe and must have it added in order to continue. I of course, however, didn't realize that upon buying the computer years ago that i should have created my own recovery disks, thinking foolishly that the company would always have this media on hand to order should the need for it arise(Plus i doubt i would've done it properly since i'm not really a computer genius, surprise, surprise)
Anyway. . .
My problem is that when i tried to order the recovery media for this ancient model, i was told that Toshiba no longer carries this models media at all. So i was just wondering if possibly there's a similar model's media that Toshiba does carry that i'd be able to order instead of this model's that would still work with my computer. I was able to do this with an old DELL I had, and was hoping the same thing was possible with a TOSHIBA.
I'm crossing my fingers here guys. Hope to hear back from you. I'd really appreciate it.
Thanks.

Satellite M45-S169
Try these third-party vendors.
   Digitalmedia-labs.com
   MyRecoveryCDs.com
   RestoreDisks.com
   RestoreCD4u
-Jerry

Do I need to create a recovery file for my new laptop if there is a HP recovery

I have just bought a HP Pavilion 15 Notebook PC 15 - n219 sa
Serial : [Edited for Personal Information]
Product # : F9U67EA#ABU
There is a recovery partition.
I am a bit confused on the issue of recovery file creation. I have found instructions on youtube on the the creation of an image of the laptop but I wonder why I need to do that given there is a HP recovery manager.
Although I do not really know what the manager does.
Can anyone tell me what the best strategy is regarding recovery files for this laptop taking in to account the partition.
After I have done this I wish to remove macfee and install the Norton I bought. Do I need to disable the macafee? If so how do I do this?
Can I remove the macefee to save space on the hard drive?
If you can help with these questions that would be much appreciate.
I gues I just want to do the right thing with this new laptop and avoid deleting too much whilst savinbg space and having a protected machine I can restore.
Thank you
This question was solved.
View Solution.

Hi,
You should definetely create a set of Recovery Media - this is your copy of the operating system. An example of when you may need this would be if you had to replace the Hard Drive - details on creating this can be found on the following HP document.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03481733&lc=en&cc=us&dlc=en
Regarding McAfee, you should uninstall this first before trying to install Norton - you can do this in the usual way by opening Windows Control Panel, open Programs and Features, right click the entry for McAfee and select Uninstall. When the process has completed, restart the notebook before installing Norton.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My ipod has gone into recovery mode for no reason at all

So I was in Sri Lanka for the past 2 months volunteering, and I took my ipod with me. My camera was unfortunately out of action from day one, so I used my (very crappy) ipod camera to take photos for the entire time that I was in Sri Lanka.
I had been there almost two months, I was in the last week of my stay when my ipod all of a sudden turns itself off when I was using it. It wouldn't come back on, and it was fully charged. I even tried plugging it in but it did nothing. It wouldn't come back on for two days, and then I tried it and it just says 'connect to itunes'. So I got home yesterrday and plugged it into itunes, and it says that my ipod is in recovery mode and has to be restored. However, if I restore it, I will lose ALL of my photos from Sri Lanka!!
I have tried googling this problem for a while and can't seem to find a solution. My home button does not work which is another pain.
But can someone please help me and tell me a way to save my photos?! I don't care about anything else, I cannot lose those photos They obviously aren't backed up either because I didn't have my computer at any point in Sri Lanka so it hasn't been connected to an itunes at any point in those photos being taken.
Thanks.

You iPod encounter and error. That happens sometimes.
Unless one of these programs will kick the iPod out of recovery mode all information on the iPod is lost
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
DId you backup to to iCloud? If so then restore from iCloud backup
iCloud: Restore your iOS device from iCloud
- If you used PhotoStream then try getting some of the photos from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer

Lenovo ideapad yoga 13 pci data acqusition and signal processing center for problem for windows 8

Link to picture
hi everyone,
find original w8 cd and then i installed, when i was installing
i deleted all recovery and other partition, i did not think what can i do,
but then i activated windows and installed all driver, but i taking
after all drivers it stayed
2''unknown devices''
and when i rebooted, it says, usb device not recognized'' and also
''pci data acquisition and signal processing center'' devices problem for windows 8. and touchscreen not working.
i read related for w7 same problem, but what i will do now ?
thanks.
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

hi adilsefaersan,
Welcome to Lenovo Community Forums!
By opening your Device Manager right click on one unknown device and choose properties,
>On the properties windows Click on the Details Tab, on the property drop down Choose hadware IDs
> then copy the value and post back here whats on the Value pane
Do it for all those unknown Device and Post here the Value of the hardware ids
also can you share your Windows Version and bit type so we'll knwo the correct download page for you
Thanks and Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How can I download or buy recovery disk for my hp pavilion dv2500s/n 2CE727216L

product name and number : hp pavilion dv2500s/n 2CE727216L
operating system windows vista
my wife try to repare a small problem
she format all the hard disk including recovery partition

You can call HP @ 1-800-474-6836 and order a set of recovery media for your notebook. Make sure to include the HP Product Number (P/N) for your notebook.

Creating a recovery drive for a K430 computer

Hello-I have a K430 desktop computer with a1TB HDD,12 GB Memory and Win8 64 bits. I used a !TB Seagate USB Drive for C drive backup and a 2GB Flash drive for Personal Document backup. I created a HDD image backup and a backup of my personal documents using the Lenovo procedure.. I understand that I need either a WIN8 disk or Recovery drive to boot and re-install my image file.
I am having problems creating a Recovery Drive. I formatted the drive to NTFS and verified that the Flash Drive was recognized by my computer. I searched for Recovery Drive.exe and it appeared. However, my flash drive did not appear on the Recovery window and the Next button remained greyed out. I will check and see if I have a recovery partition.Have you developed a fix for this problem? If so, please let me know. Thanks.
Carl W Lesesne

Updating Creating a recovery drive for a K430 Computer
Hello-I obtained a copy of Microsoft's Windows Create a USB recovery drive and discovered that I do not have a recovery partition. After entering recimg/showcurrent in a command prompt, I received a message stating that there is no active custom recovery image.
I attempted to create a recovery partition by entering mkdir C:\RefreshImage and recimg-Create C:\RefreshImage after the Command Prompt. This resulted in the following error message: recimg-createIMage is not recognized as an internal or external command. I have reported this problem to Microsoft also. If you are aware of a fix for this problem, please let me know. Thanks.
Carl W Lesesne

I lost my recovery partition for hp dv6 63300ee, with windows 7 home,, what can i do to back it?

i lost my recovery partition for hp dv6 63300ee, with windows 7 home,, what can i do to back it?

Hi,
This assumes that Windows 7 was the original OS that your notebook came with.
If you created a set of Recovery Discs you can use these to reinstall the original OS - they will also re-create the Recovery Partition on the Hard Drive as well as reinstalling all your original software. Remember this is a destructive process, so back up any personal files etc that you wish to keep before reinstalling the Operating System.
If you don't have your original Recovery Discs, you can order a replacement set using the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Recovery disc for pavilion/dvl6604cl

Please tell me how to order a recovery disc for the pavilion dl6604cl notebook. My harddrive has failed and the Geek squad needs the recovery disc to get my notebook back on line. I can't find where to order the disc.

Hi
Please find the link given below to order the recovery disc.
Looking for Recovery Discs
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

What is right Recovery CD for Satellite L300?

I recently bought "Toshiba Satellite L300" which had Windows 7 operating system but the Recovery CDs had Windows XP.
And my hard disk was single partition and Microsoft office was not working on this notebook and I used that CD to fix these problems.
But I lost my previous Windows 7.
Now it is Windows Xp SP 3 on my computer.
But I am not satisfied with XP want Windows 7.
How can i get it again for free?
Please let me know that what is right Recovery CD for "Toshiba Satellite L300". ?

>I recently bought "Toshiba Satellite L300" which had Windows 7 operating system but the Recovery CDs had Windows XP.
Hmm this is strange I have no clue what Satellite L300 this is but usually an L300 series was preinstalled with Vista Home Premium
So Im wondering why Win 7 was preinstalled and why you get Win XP recovery disk
Usually the L300 should be equipped with an HDD recovery partition which would contain the Toshiba image.
It should be able to recover the new notebook using the HDD recovery and this should help you reinstall the Vista OS.
In my opinion you should talk with your dealer maybe the notebook was a replacement device????
Who knows

Recovery problem for V200

Similar Messages

Maybe you are looking for