Recovery problem - urgent

Just used disc 1 of the toshiba recovery cd thing. Was the one that erased everything. Now im trying to reinstall Windows, etc., however when it asks me to locate the drivers and such i put in the cd and dont know what to do.
Summary: erased harddrive using Toshiba recovery disc, and is now stuck.
Help please

re-run the recovery again, do not select erased hard drive but do select only first option all the way thru so it will reinstall windows, drivers and its application.
=========================================================
the only easy day was yesterday.....
=========================================================

Similar Messages

Troubleshooting System Recovery Problems

A System Recovery is a useful tool to return your Windows 8 tablet back to factory defaults. However, what do you do when the System Recovery isn't working!?
A full System Recovery can be a lengthy process as there is a lot of data being transferred. Patience is the key, as a full Recovery can take two to four hours to complete.
For more information check out HP's Troubleshooting HP System Recovery Problems for Windows 8. This document will help you get your Windows 8 tablet back up and running.
TIP: If you are planning on using the System Recovery make sure that you do not change or delete the HP Recovery Partition as that will make all but impossible to Restore your tablet using the HP Recovery Manager.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Have you created this disc on your own or you use original toshiba disc?
Do you use it for the first time?

J2EE StartUp Problem, URGENT.

Hi all!
I'm having a problem since friday with the J2EE Engine Startup. The problem is that MMC says me that the server is running but i can access to the server by anyway. The developer trace of the jcontrol process is:
[Thr 2968] Tue Aug 09 13:59:50 2005
[Thr 2968] JControlICheckProcessList: process server0 started (PID:1544)
JStartupStartJLaunch: program = C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
-> arg[00] = C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
-> arg[01] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_toshiba-user
-> arg[02] = -DSAPINFO=J2E_00_sdm
-> arg[03] = -file=C:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties
-> arg[04] = -nodeName=sdm
-> arg[05] = -nodeId=2
-> arg[06] = -syncSem=JSTARTUP_WAIT_ON_2964
-> arg[07] = -jvmOutFile=C:\usr\sap\J2E\JC00\work\jvm_sdm.out
-> arg[08] = -stdOutFile=C:\usr\sap\J2E\JC00\work\std_sdm.out
-> arg[09] = -locOutFile=C:\usr\sap\J2E\JC00\work\dev_sdm
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_toshiba-user
-> lib path = PATH=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;C:\oracle\WAS\92\bin;C:\oracle\WAS\92\jre\1.4.2\bin\client;C:\oracle\WAS\92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_08\bin;C:\oracle\WAS\92\Appache\perl\5.00503\bin\MSWin32-x86;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
-> exe path = PATH=C:\j2sdk1.4.2_08\bin;C:\usr\sap\J2E\JC00\j2ee\os_libs;C:\oracle\WAS\92\bin;C:\oracle\WAS\92\jre\1.4.2\bin\client;C:\oracle\WAS\92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_08\bin;C:\oracle\WAS\92\Appache\perl\5.00503\bin\MSWin32-x86;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
[Thr 2968] Tue Aug 09 13:59:51 2005
[Thr 2968] JControlICheckProcessList: process SDM started (PID:1556)
[Thr 1188] Tue Aug 09 14:01:01 2005
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] Tue Aug 09 14:01:58 2005
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] Tue Aug 09 14:10:25 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:15:45 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:20:46 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:26:06 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:31:07 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:36:27 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:41:28 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
Then i try to login the visual admin gives me a windows error and the msg_server process shuts down alone. Then i restart that node and agregate the following lines to the trace:
Thr 1188] Tue Aug 09 14:42:25 2005
[Thr 1188] *** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c      2488]
[Thr 1188] *** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c      1652]
[Thr 1188] Tue Aug 09 14:42:27 2005
[Thr 1188] ***LOG Q0I=> NiPConnect2: SiPeekPendConn (10061: WSAECONNREFUSED: Connection refused) [nixxi_r.cpp 8588]
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 1188] Tue Aug 09 14:42:32 2005
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 1188] Tue Aug 09 14:42:38 2005
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 1188] Tue Aug 09 14:42:44 2005
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 1188] Tue Aug 09 14:42:49 2005
[Thr 1188] JControlMSConnect: reconnected to message server (toshiba-user/3601)
[Thr 1188] Tue Aug 09 14:48:11 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:53:12 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:58:32 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
I try to login the visual admin again and gives me the following error: "Cannot open connection on host: 191.9.6.22 and port: 50004"
Looking the log and trace files i see the following errors:
- SAPEngine_System_Thread[impl:5]_5##0#0#Error#1#/System/Server#Plain###Encomi: failed to connect to toshiba-user/3201(Connection refused: connect)#
- java.net.SocketException: socket closed
     at java.net.PlainSocketImpl.socketAccept(Native Method)
     at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:353)
     at java.net.ServerSocket.implAccept(ServerSocket.java:448)
     at java.net.ServerSocket.accept(ServerSocket.java:419)
     at com.sap.engine.core.port.impl0.ServerSocketListener.run(ServerSocketListener.java:87)
- erver socket listener opened by service on socket encountered error. The listener will be stopped.#2#p4#ServerSocket[addr=/0.0.0.0,port=0,localport=50004]
I dont know whats happening, if somebody knows i hope that helps me. Please is urgent.
Thx and Rgds.
Gregory

Hi, thx a lot both.
Respect the link
http://<hostname>:50<instanceno>00/sap/monitoring/SystemInfo , i cant access it. I cant access by telnet, by visual admin.
In the work folder under \usr\sap\<sid>\JC00 i found that the last updated files are:
- available.txt that contains the following data:
    Unavailable 08.08.2005 10:46:53 - 08.08.2005 10:58:54
    Available   08.08.2005 10:59:54 - 08.08.2005 13:52:54
    Unavailable 08.08.2005 13:53:54 - 08.08.2005 13:53:54
    Available   08.08.2005 13:54:54 - 08.08.2005 14:03:54
    Unavailable 08.08.2005 14:04:54 - 08.08.2005 14:04:54
    Available   08.08.2005 14:05:54 - 08.08.2005 14:34:54
    Unavailable 08.08.2005 14:35:54 - 08.08.2005 14:39:44
    Unavailable 08.08.2005 14:56:17 - 08.08.2005 16:24:13
    Unavailable 08.08.2005 16:28:07 - 08.08.2005 16:29:07
    Unavailable 08.08.2005 16:34:36 - 08.08.2005 17:17:58
    Unavailable 09.08.2005 08:13:36 - 09.08.2005 08:54:33
    Unavailable 09.08.2005 08:57:04 - 09.08.2005 12:46:25
    Available   09.08.2005 12:47:25 - 09.08.2005 13:26:25
    Available   09.08.2005 13:43:56 - 09.08.2005 13:55:56
    Unavailable 09.08.2005 13:56:40 - 09.08.2005 14:04:57
    Available   09.08.2005 14:05:57 - 09.08.2005 16:16:57
    Unavailable 09.08.2005 16:17:57 - 09.08.2005 17:27:12
    Unavailable 10.08.2005 08:10:30 - 10.08.2005 08:35:39
    Available   10.08.2005 08:36:39 - 10.08.2005 09:16:39
    Available   10.08.2005 12:33:51 - 10.08.2005 14:01:51
- dev_jcontrol that contains the information displayed in the developer trace of jcontrol process(and y mentioned above)
- dev_dispatcher that contains the following info:
    [Thr 2664] Wed Aug 10 08:33:04 2005
    [Thr 2664] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 2664] JLaunchISetClusterId: set cluster id 5761000
    [Thr 2664] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 2664] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 3320] Wed Aug 10 08:33:21 2005
    [Thr 3320] JLaunchISetP4Port: set p4 port 50004
    [Thr 3528] Wed Aug 10 08:33:26 2005
    [Thr 3528] JLaunchISetTelnetPort: set telnet port 50008
    [Thr 3528] JLaunchISetTelnetPort: set telnet port 50008
    [Thr 3584] Wed Aug 10 08:33:55 2005
    [Thr 3584] JLaunchISetHttpPort: set http port 50000
    [Thr 2664] Wed Aug 10 08:34:02 2005
    [Thr 2664] JLaunchISetState: change state from [Starting (2)] to [Running (3)]
    [Thr 2568] Wed Aug 10 08:34:08 2005
    [Thr 2568] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 3660] Wed Aug 10 08:35:07 2005
    [Thr 3660] JLaunchISetP4Port: set p4 port 50004
    [Thr 3600] Wed Aug 10 08:36:34 2005
    [Thr 3600] JLaunchISetHttpPort: set http port 50000
    [Thr 3612] Wed Aug 10 12:43:40 2005
    [Thr 3612] JLaunchISetHttpPort: set http port 50000
    [Thr 3612] JLaunchISetP4Port: set p4 port 50004
    [Thr 3612] JLaunchISetTelnetPort: set telnet port 50008
- dev_server0 that contains:
    [Thr 2676] Wed Aug 10 08:33:06 2005
    [Thr 2676] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 2676] JLaunchISetClusterId: set cluster id 5761050
    [Thr 2676] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 2676] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 4296] Wed Aug 10 08:34:58 2005
    [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 4296] Wed Aug 10 08:35:00 2005
    [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPConverters
    [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPCharToNUCByteConverter
    [Thr 4296] Wed Aug 10 08:35:01 2005
    [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPNUCByteToCharConverter
    [Thr 2676] Wed Aug 10 08:35:07 2005
    [Thr 2676] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
    [Thr 208] Wed Aug 10 08:36:34 2005
    [Thr 208] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
I still dont know whats happening. And i need to solve the problem urgent. I hope u can help me.
Thx and Rgds.
Gregory.

DATE FIELD PROBLEMS - URGENT

I´m having trouble with FormsCentral.
My form is running about 8 months with no problems.
Yesterday people started to complain that the system doesn´t accept any date.
That means the date field restricts date entries, from date dd/mm/aaaa (brazilian format) to another dd/mm/aaaa, but every date that users input in, is considered by the system as invalid, even it´s a correct and valid date right between the interval specified!
I need Help Urgent!!!
I depend on these forms to finish the payrol service from here.
Thanks
I´ll be waiting.
Maurício Galletti
Message was edited by: SNOWMAUSS
It look like the system accepts just dates starting from the date of today.
I´m testing.
Please help.
Thanks
Message was edited by: SNOWMAUSS
It looks like the system have some problem just with the date 20/10/2013?!
I´ve fixed the problem change the interval from 20/10/2013 to another date and used 21/10/2013 to another date and it works!
But I think something is wrong with the 20/10/2013 date?!
To reproduce the erros just create a new form with date feature with this exaclty configurations and the bug appears:
I´ll keep waiting
Message was edited by: SNOWMAUSS

Hi
I´ve concluded that the problem persist if the date interval starts at the
specific date "20/10/2013". Don´t know why?!
Look at the screen capture above, you aks for
Thanks a lot
image: Imagem inline 1
Maurício P. Galletti
Contador
[email protected]
( 55 11 3331-5567
www.cadt.com.br
2013/10/29 Genevieve Laroche <[email protected]>
Re: DATE FIELD PROBLEMS - URGENT created by Genevieve Laroche<http://forums.adobe.com/people/Genevieve+Laroche>in
FormsCentral - View the full discussion<http://forums.adobe.com/message/5797083#5797083

Details: i can not buy any thing from the app store and any thing from in side any games pls fix my problem urgent and as soon

Details:
Hi i can not buy any thing from the app store and any thing from in side any games pls fix my problem urgent and as soon
Note this is second email pls answer and fix my problem
<Email Edited by Host>

These are public forums, you are not talking to iTunes Support here (most of the people here, including myself, are fellow users) - I've asked the hosts to remove your email address from your post
If you are getting a message to contact iTunes support then you can do so via this page and ask them why the message is appearing (we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ?

Recovery problem Touchsmart

i bought Recovery cd.s from HP to make my computer fresh after a virus problem.
there was 4 cd.s, 1 to 4
But also 4 other cd.s with the name Supplemental Recovery. But on these it says 1:1 on all 4 of them.
The problem is that the recovery sequence stops at about 80%
And im getting a code 0xe0cf0003
Would be very happy to get some urgent help.
Thomas

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the back or bottom of your computer. Please do not include your serial number. Please enter the model/product information into the HP's Online Consumer Support page and/or post it here for our review.
Most information I have read, indicates that the "0xe0cf0003" error code you are receiving is due to damaged or corrupted HP Recovery Discs, a failing hard drive, or failing memory modules. Check the DVDs and make sure there are no scratches or dirt on the discs. Please see Testing for Hardware Failures (Windows 7) for instructions on testing your computer's hardware at the BIOS startup screen. Additionally, you may find it useful to create a bootable Diagnostic Disc or USB Flash drive.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

HP G56 System Recovery Problem after removing disk 4 black screen

hi everyone
this is my first time, im helping my nextdoor neighbours laptop hp g56,
the hard drive has been fried and i have intalled my old playstation 3 40 gb hard drive into it.
after the recovery system finished and told me to remove disk 4 it restarts and now have a black screen, does this mean its still installing because i turned it off and then on and now say no bootbale device.
windows 7
40 gb hard drive (ps3 40gb)

pepe999 wrote:
selinacartwrigh wrote:
my system comes on and then stop before it opens the key board and say disk boot failure insert system disk how could find a disk I cant even get in
The message means that your internal hard has been damaged. This message always comes up when the file system is corrupted. I suggest to remove it, connect the hard drive into a different computer as an external drive (use usb caddy), perform a backup if possible and the format the hard drive and restore the factory settings. I'm afraid that you have to reformat the hard drive, a checkdisk scan won't help..
The error message means that the Boot Sector is corrupt or has been damaged. It does not mean that the hard disk is damaged.
This is a fixable issue. There are a few command line tools that can be used.
You will need to make an appropriate version (32-bit / 64-bit) of the Windows 7 repair disc from a working Windows 7 installation. You will need either a USB or CD to create your rapair CD/USB. Follow the instructions on this video to create the repair installation of your choice..You will will be using the manual boot sector repair that is described in this video to repair your Windows 7 Boot sector. Use the Windows 7 repair disc or repair USB thumb drive that you created earlier to accomplish the repair.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Recall for my problem urgent help needed

Hi friends,
I am a new DB administrator and I have faced a problem in our database.
Here i will explain our architecture and i will state the problem.
In my org. we have database server responsible for keeping the DB itself. Another server which is the main server is responible to control the access to the network and making and storing DB backups using a third party software (Net Backup Software). The backups are kept in tapes accessed by main server using tapes robot.
Our backup policies is that the software makes full backup every week and a incremental dialy backups of the DB. The retention of each backup is two weeks. All servers have been shutted down during vacations.
The problem is that when we came from two weeks vacation, users found that the DB is in old state and we lost the most recent valid state. I tried all my best since month ago to do recovery. I decided the point of time to restore and I also use the SCNs but I could'nt reach a solution. I used Net backup, Rman, EM but without a result.
When i check NetBackup console I find a backup available since 28 of July 2010. Actually the changes are made after this date and now the DB state is older thatn this date. the question is: WHER HAVE THE CONSEQUENT CHANGES GONE? around one mounth of work has been lost..
the oracle shows me the following message:
The RMAN script for the recovey is:
Run {
allocate channel t1 type 'sbt_tape';
set until time to_date('28-Jul-2010 00:00:00', 'DD-MON-YYYY HH24:MI:SS');;
restore database;
recover database;
release channel t1;
RMAN-00571: ========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ============
RMAN-00571: ========================================================
RMAN-03002: failure of restore command at 21/09/2010 11:01:26
RMAN-06100: no channel to restore a backup or copy of datafile 20
RMAN-06100: no channel to restore a backup or copy of datafile 19
RMAN-06100: no channel to restore a backup or copy of datafile 18
RMAN-06100: no channel to restore a backup or copy of datafile 17
RMAN-06100: no channel to restore a backup or copy of datafile 16
RMAN-06100: no channel to restore a backup or copy of datafile 15
RMAN-06100: no channel to restore a backup or copy of datafile 14
RMAN-06100: no channel to restore a backup or copy of datafile 13
RMAN-06100: no channel to restore a backup or copy of datafile 12
RMAN-06100: no channel to restore a backup or copy of datafile 11
RMAN-06100: no channel to restore a backup or copy of datafile 10
RMAN-06100: no channel to restore a backup or copy of datafile 8
RMAN-06100: no channel to restore a backup or copy of datafile 6
RMAN-06100: no channel to restore a backup or copy of datafile 5
RMAN-06100: no channel to restore a backup or copy of datafile 4
RMAN-06100: no channel to restore a backup or copy of datafile 3
RMAN-06100: no channel to restore a backup or copy of datafile 2
RMAN-06100: no channel to restore a backup or copy of datafile 1
the backup script is as follows:
DB server = jewcsrv3.
Main server = jewcsrv1.
RUN {
echo ALLOCATE CHANNEL ch00
echo TYPE 'SBT_TAPE';
echo SEND 'NB_ORA_CLIENT=jewcsrv3,NB_ORA_SERV=jewcsrv1';
echo BACKUP
echo %BACKUP_TYPE%
echo FORMAT 'bk_u%%u_s%%s_p%%p_t%%t'
echo DATABASE;
echo RELEASE CHANNEL ch00;
echo # Backup Archived Logs
echo # For an offline backup, remove the following sql statement
echo sql 'alter system archive log current';
echo ALLOCATE CHANNEL ch00
echo TYPE 'SBT_TAPE';
echo SEND 'NB_ORA_CLIENT=jewcsrv3,NB_ORA_SERV=jewcsrv1';
echo BACKUP
echo FORMAT 'arch-s%%s-p%%p-t%%t'
echo ARCHIVELOG
echo ALL
echo DELETE INPUT;
echo RELEASE CHANNEL ch00;
echo # Control file backup
echo ALLOCATE CHANNEL ch00
echo TYPE 'SBT_TAPE';
echo SEND 'NB_ORA_CLIENT=jewcsrv3,NB_ORA_SERV=jewcsrv1';
echo BACKUP
echo FORMAT 'bk_u%%u_s%%s_p%%p_t%%t'
echo CURRENT CONTROLFILE;
echo RELEASE CHANNEL ch00;
echo }
Could any one please help me to solve this problem. If there is no solution what could he suggest to do now to have a valid state and for future to avoid this problem.
Thanks alot..
PLEASE REPLY AS SOON AS POSSIBLE
Edited by: 799539 on Oct 4, 2010 12:35 AM

Your BACKUP script does set the NetBackup parameters for the Tape Channels.
However, your RESTORE script does not specify the NetBackup parameters -- so Oracle doesn't know which channel to use for the Restore.
You need to add the NetBackup parameters in the RESTORE.
However, this is suprising :
The problem is that when we came from two weeks vacation, users found that the DB is in old state and we lost the most recent valid stateA database will NOT EVER "go back to an old state" until and unless someone has restored an old backup. If the servers were shutdown for two weeks, who would have restored the database. If the servers were shutdown, how would Oracle have automatically gone back to an old stats ? There must have been some manual actions.
Hemant K Chitale

Windows 8.1 recovery problem and install dell backup and recovery software...

i had upgrade my windows to 8.1, the problem is that i cant install Dell backup & recovery, when i installing and updating PE I get FACTORY SETUP ERROR 5
is there any technical help me please...thx
however...its cant recovery or reset my laptop back to factory image...
just like this photo...
recovery cant... refresh also cant...

Same problem here: windows 8.1, dell backup and recovery 1.6.2.4. During the installation, when the box of "updating PE environment" appears, i get "factory error 5"
Is there any solution?
Regards

Pricing problem-Urgent

Hi all,
iam getting a problem regarding pricing.
When i make a Sales doc. with reference to an invoice,
everything is being copied from invoice to the sales doc.-customer, material and its no. , sales area, payment terms, incoterms, and material qty. also.
But the pricing of the invoice is not getting copied on to the sales doc.
I have maintained all checks available in the sales doc. type and the item category of the sales doc. type i.e
Pricing: X
and then in OVKK , i have maintained the doc. pric. procedure of the sales doc. type with the pricing procedure of the invoice
and again in the copy control measures, i have maintained
Pricing type: D
But i still not able to copy pricing procedure from the invoice to the Sales doc.
I want the soltn. urgently.
Thanks in advance
Sourav

run VTAF for your sales doc type/bil type
and check item category
set flag for "update doc flow"
and pricing type B

Recovery Problem

I have a Dell Latitude X200 laptop (with Windows XP Pro) and a Zire 31. My use of the Zire is restricted to its Calendar and Contacts features. On April 29 the Palm data on the Dell was seriously corrupted. The Zire has not been HotSynced for over a month. BUT, by using the “Export” option in the Zire’s Calendar and Contacts sections, I had saved those two datasets to a flash drive on April 27. I want to: 1) Remove all present data from the Dell and the Zire. 2) Copy the saved Calendar and Contacts data from the flash drive into the Dell. 3) Perform a “HotSync” to copy the correct data in the Dell into the Zire. Is there any hope that I can get my April 27 data back into the Dell where it belongs, and then into the Zire?

A couple of things:
Reset system bios to the defaults - F2 at start up to enter the bios f9 to set to defaults and then f10 to save.
then try to start.
Did you have any problems before trying to recover, slow or lagging response, etc. These problems can be caused by virus/maleware and also a failing hard drive.
The recovery may not be completing because of bad sectors on the drive - a failing hard drive.
Your support page is here - http://support.toshiba.com/support/modelHome?freeText=3567388
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

HP Pavilion dv6-3023sy: Recovery problems. Help me!

I have a problem with Recovery:
After that: Insert Recovery Media ...
Help me, please ...
And if you can, please in Russian
This question was solved.
View Solution.

This recovery is from partition or your HP Disk?
Probably you recovery is corrupt.
If you don't have the HP Disk you can make the download here :
If this don't work or your computer is very slow before show this message, Probably is a error in Hard Disk:
https://h10025.www1.hp.com/ewfrf/wc/mediaOrder?softwareitem=585237-001&cc=us&dlc=en&lc=en&os=4063&pr...=
Run the diagnostic to see if your HD is damage:
Shutdown your computer and press the Key ESC a lot times.
Showed: STart Up Menu and a lot options.
Click the Key F10
GO to Diagnostic> Primary Hard Disk Self Test > Press Enter and let run the diagnostic.
If any error message appear, let me know.
If this answer help you click in Kudos to tanks.
If you don't have more question click in Accept as Solution to close this case.
Best Regards Cristian Derick.
Senior Support Analyst.

Mac OS recovery problem. Need help

Hello toevery one.
I have defective SATA cable to HD bay now. And also new clean SDD Samsung 840 Pro 240 GB (without data or any OS on it) installed in HD bay
I've ordered a new cable, but I'd like to use the SSD untill then, if it was possible so I decided to change my HDD (that on working properly SATA cable) and SDD (that on defective SATA cable) in places and restore Mac OS via external HDD with Time Machine image on faster SSD. So now my new SSD on the optical drive bay with working properly SATA cable and HDD on HD bay with defective SATA cable.
And I faced a problem...
1. I've made configuration of SSD and erased the contents of the SSD and formated it as "Mac O S Extended (Journaled)" with a single GUID partition.
2. I chose the most fresh Image on my HDD that has been prepared in advance and started to wait.
3. The recovery of the system froze on 0,5% and estimated time started to rapidly increase. I've cancelled it when estimated time of full recovery was about 24 hours. System hanged and I turned it off by pressing POWER button.
4. I repeated all the operations again.
5. The recovery froze on 3,8% and estimated time started to grow up again.
6. I've took a look on log file and saw that some host can't be reached or found.
Do you know what is the problem?
Thank you!

Corrections:
1. SDD Samsung 840 Pro 256 GB
2. Mac OS Lion

HTML Link problem (Urgent!)

I'm writing a prrogram that displays an HTML file. I used a JEditorPane. I tryed using the hyperlinkListener but it doesn't work! here's the class I wrote...
can anyone help please?
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.util.*;
import javax.swing.*;
import browser.*;
import java.net.*;
import javax.swing.event.*;
* Classe :
* Description :
* Societe : Medias France
* @version 1.0
public class Aide extends JFrame implements HyperlinkListener
     BrowserInterface bI;
     URL url1;
     static Interface parent;
     public Aide(String titre, Interface i)
          super(titre);
          parent = i;
          getContentPane().setLayout(new BorderLayout());
          //bI = new BrowserInterface(jp);
          setBounds(10,10,800,600);
          addWindowListener(new WindowAdapter()
               public void windowClosing(WindowEvent e)
               quit(null);
          try
               url1 = new URL("file:/home/darkazan/java/BDO/tablegen-1.8/help/help.html");
               //bI.URL_Process(url1);
          catch (MalformedURLException e)
               System.out.println("probleme " + e.toString());
          JEditorPane editorPane = new JEditorPane();
     editorPane.setEditable(false);
     try
     editorPane.setPage(url1);
     catch (IOException e)
     System.err.println("Attempted to read a bad URL: " + url1);
     JScrollPane editorScrollPane = new JScrollPane(editorPane);
          editorScrollPane.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED);
     editorScrollPane.setPreferredSize(new Dimension(800, 600));
     getContentPane().add(editorScrollPane, "Center");
     pack();
     setVisible(true);
     public void hyperlinkListener(HyperlinkEvent e)
          if (e.getEventType() == HyperlinkEvent.EventType.ACTIVATED)
     // do something on HL click
System.out.println("ouverture");
          if (e.getEventType() == HyperlinkEvent.EventType.ENTERED)
          // do something on mouse over HL
     // do something on HL click
     System.out.println("bbbbbbbbbbbbbbbbbbbb");
if (e.getEventType() == HyperlinkEvent.EventType.EXITED)
// do something on HL click
System.out.println("ggggggggggggggggggg");
// do something on mouse moved away from HL
     public void hyperlinkUpdate(HyperlinkEvent e)
     public static void main(String[] args)
          Aide aide1 = new Aide("Help", parent);
     * Quitter l'application
     * @param     e L'evenement recu
     * @return     Sans objet.
     void quit(ActionEvent e)
          parent.bAide.setEnabled(true);
          dispose();
}

also check your file protocol it should look like this: file:/// with three slashes(i think?)
here Mr. Urgent, my html viewer: (and it works) ;P
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.text.*;
import javax.accessibility.*;
import java.awt.*;
import java.awt.event.*;
import java.net.URL;
import java.net.MalformedURLException;
import java.io.IOException;
public class iROCHelp extends JPanel implements HyperlinkListener{
//ATTRIBUTES
JEditorPane html;
private static boolean HelpShowing = false;
private static JFrame selTopic;
//METHODS
//Constructor
public iROCHelp(java.net.URL URLstr){
//setBorder(new EmptyBorder());
setLayout(new BorderLayout());
try{
URL url = URLstr;
if(url != null){
html = new JEditorPane(url);
html.setEditable(false);
html.addHyperlinkListener(this);
JScrollPane scroller = new JScrollPane();
JViewport vp = scroller.getViewport();
vp.add(html);
vp.setBackingStoreEnabled(true);
add(scroller, BorderLayout.CENTER);
catch (MalformedURLException e){
System.out.println("Malformed URL: " + e);
catch (IOException e){
System.out.println("IOException: " + e);
}//HelpTopic CONSTRUCTOR
public void hyperlinkUpdate(HyperlinkEvent e){
if (e.getEventType() == HyperlinkEvent.EventType.ACTIVATED){
linkActivated(e.getURL());
}//hyperlinkUpdate
protected void linkActivated(URL u){
Cursor c = html.getCursor();
Cursor waitCursor = Cursor.getPredefinedCursor(Cursor.WAIT_CURSOR);
html.setCursor(waitCursor);
SwingUtilities.invokeLater(new PageLoader(u, c));
}//linkActivated
class PageLoader implements Runnable{
PageLoader(URL u, Cursor c){
url = u;
cursor = c;
public void run(){
if (url == null){
// restore the original cursor
html.setCursor(cursor);
Container parent = html.getParent();
parent.repaint();
else{
Document doc = html.getDocument();
try{
html.setPage(url);
catch (IOException ioe){
html.setDocument(doc);
finally{
// schedule the cursor to revert after
// the paint has happended.
url = null;
SwingUtilities.invokeLater(this);
}//else
}//run
URL url;
Cursor cursor;
}//PageLoader
public static void spawnHelp(java.net.URL URLStr){
if (!HelpShowing){
selTopic = new JFrame();
selTopic.getContentPane().setLayout(new BorderLayout());
selTopic.getContentPane().add(new iROCHelp(URLStr),BorderLayout.CENTER);
Dimension dim = selTopic.getToolkit().getScreenSize();
selTopic.setLocation((int)dim.getWidth()/2-selTopic.getWidth()/2,(int)dim.getHeight()/2-selTopic.getHeight()/2);
selTopic.setSize(500, 400);
selTopic.setTitle("Remote Operators Console Help");
selTopic.addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent e){
closeHelp();
}//windowClosing
selTopic.show();
HelpShowing = true;
}//if help showing
}//spawnHelp
public static void closeHelp(){
if (HelpShowing){
selTopic.dispose();
HelpShowing = false;
}//closeHelp
}//HelpTopic CLASS

USB Recovery problem

I received my USB Recovery device. I followed directions of turning off computer, inserting USB, Hit escape, then I get the startup Menu. When I hit F9 as instructed, I get a Blue Recovery screen that says
Your PC needs to be repaired
The boot configuration data is missing some required information
File:\BCD
Error code: 0xc0000034
I can not get past this point. Any help please!!

Hi McCarterRN.
Did you order a USB recovery stick from HP?
Are you testing the USB recovery device or is your PC unbootable?
If your PC is functioning correctly you can, for additional peace of mind, create DVD or USB recovery media by using HP's Recovery Manager. I cannot direct you to instructions on creating recovery media as I do not know your product number and factory installed operating system (OS). If you have upgraded your OS this will present additional obstacles.
Please provide the factory and current operating system you are using. Please provide your HP product number.
HP product number instructions can be found here.
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
Errare humanum est.

Recovery problem - urgent

Similar Messages

Maybe you are looking for