Recovery Slider: Color Changes with Camera Profiles, not so much with ACR 4.4 Profile?

I'm sure there's a reason for this, and not necessarily a defect, but I have to ask:
The recovery slider: if I use the Recovery Slider on an image set to the ACR 4.4 camera calibration profile, this helps control my highlights without affecting the overall color/tint of the image. However, if an image is set to the Adobe Standard camera calibration profile (or any of the other camera profiles) and I use the Recovery Slider on that image, the affect on the image seems to be different: the highlights are also controlled, but not without a perceived effect on the color tint of the image. The color balance almost seems to slightly change. Particularly noticeable on skin tones. I'm working with 5D files, using Lightroom 2.3 on a Mac.
What's the reason for this? Anyone experience similar?
Thanks

This is a known "problem". It is caused by "hue twists" that are present in the camera-matching profiles and the new Adobe profiles. Several threads on this in the ACR forum:
http://www.adobeforums.com/webx?128@@.3bc03c04.59b77b09
http://www.adobeforums.com/webx?128@@.3bc03c04.59b783f8

Similar Messages

Help, web cam is not working properly with win vista

Hii.. my web cam is not working properly with win vista..even if the icon appears bt it does nt start.. its
lenovo easy capture 2.5...so if u cud suggest me anything...
Moderator note; subject edited

re-install drivers and try again. ( also easy capture )

TA25361 I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro. Is there any way to recover this info? Some documents can be opened and resaved with textedit, but not my database with all important addres

I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro. Is there any way to recover this info? Some documents can be opened and resaved with textedit, but not my database with all important addresses.

I tried Peggy's List > Select All > Copy > Paste into an AW spreadsheet suggestion.
In my case, pasting into the spreadsheet lost all text formatting (mostly text set to bold). The results of formulas were pasted, and checkboxes were pasted as "on" or "off". The DB did not contain any pop-up menus or radio buttons, but I expect they would transfer as a number showing the list position of the chosen item.
Pasting the copied List view data into a Numbers table gave a result similar to that with AppleWorks. I selected B2 as the target cell (for top left cell of the pasted data) to avoid any effects of posting into a header row or column. Bold and regular text formatting looked the same as it had in AW's List view.
Based on that, I'd slip the 'paste into an AppleWorks Spreadsheet step, and paste directly into a Numbers Table.
Regards,
Barry

Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?

Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
Any way to fix it?

only $99, i thought it was closer to $175.

Master slide color change?

I'm changing the background color of a Theme, but would like that color change to apply to all master slides. I've changed one of the master slides in the theme I chose, but don't know how to apply this same color change to all of the master slides for this theme. I shouldn't have to change each master slide, right? I should be able to apply this color change to all master slides automatically?

Select all the sides...click+shift on each slide. Or pick one slide then select all...Apple key+A. Then change your theme/master.

Bridge: Saving color changes in Camera Raw through final output.

Hello, I am on a Mac and I am trying to use Bridge's Camera Raw to do some simple corrections. I have made a collection to select the photos I want to correct. Now that I am done I am trying to do a Batch Rename and select those files to output to a folder on my desktop. Problem is when I do this the photos look unchanged like I did not correct it. How can this be resolved?

Yes, you're missing something.
Camera profiles are meant to account for different spectral distribution in different light sources, which is something else than different color temperatures. You still have to make all the normal adjustments, like white balancing, to get the image right.

Bridge and Camera Raw not installing correctly with Photoshop CS5

First time installing i got bridge to load, but camera raw did not work. I had the notice at the end of instalation that there were numerous errors with the intall, totalling 13.
Uninstalled, and tried to reinstall. I only got three errors, but now bridge is not on the computer or camera raw.
Fustrated, wondering if I should have gotten the disks intead of the online installer.

Try running the Creative Suite Cleaner Tool and reinstalling. For everything else a look at the install logs would be required.
Mylenium

P65+ RAW files with camera RAW - Not yet

Folks,
I'm just wondering if I'm alone here cos I can't find any mention anywhere online. Just had a shoot come in froma photographer (I'm in an ad' agency and we get all types of files from various photographers) shot on a P65+ back. The RAW TIFs are about 55MB each and when I bring them into to Photoshop or Lightroom to process the image to photoshop for retouch, it shows the four sensors from the camera back.You can just see it at this size, (client confiedential prodcut shoot I've had to blank out)
A close up shows the centre of the four sensors...
My workaround is to go back to CaptureOne and process the files to DNG, then bring them into Lightroom, but my DNGs become 110MB, twice the size the original RAW.
I know it's a fairly new digital back, but surely I'm not alone with this problem? Cos that would be really lonely ;-)

Mark Kenny wrote:
I know it's a fairly new digital back, but surely I'm not alone with this problem? Cos that would be really lonely ;-)
Correct...as far as I know, Phase still needs to get certain info out to Adobe in order to address the 4 quadrants. As I understand it, there are actually 4 "pipelines" of data being pulled off the chip. Think of them as arrayed data streams...none of them is gonna match "exactly" so Phase tucks calibration data in the file. Camera Raw can (as far as I know) read the data from a P 45+ so I don't think it's a question of if, but one of when...it didn't make the 5.4 update, maybe it'll make the next one (I don't actually know).
However, depending on the camera in use, you may indeed want to do the tiff > DNG conversion to take advantage of the Lens Correction capabilities of Capture One. I use a Phase 645 with Phase lenses that benefit from the DNG conversion.

IP camera feed not available anymore with iOS6. Not working on a any browser anymore. What's wrong?

After updating to iOS 6 on iPhone 4, I can't see my IP camera feed on any browser available (As I used to do on iOS 5.1.1 and was working fine)
On the other hand, there isn't any app that supports SITECOM IP cameras feed.
So what's the deal? Waiting for an update or what?

I'm having the same problem.
With the recent release of Safari 6.0 for MAC, we have are having problems streaming video. We were able to with previous versions of Safari on both MAC and Iphone. We used the following URL: http://74.95.30.43/display_pic.cgi?cam=1&res=hi&audio=off&refresh=16000628090
This URL will stream with Mozilla Firefox on the MAC but not Safari 6.0. This wasn't a problem up until now because we could just use Mozilla Firefox. However, Firefox is not available with the Iphone & Ipad. On the Iphone & Ipad, we just get a "still image" and the image does not refresh.
Any assistance will be greatly appreciated.

Pictures taked with Camera are not saved.

When taking pictures using my iPad Air the app functions normally but the pictures are not saved to the iPad. Am I missing a setting somewhere in Settings?

Yes, they are on the "Camera Roll".
When I had iPad (the original) these are saved pictures from various apps (Facebook, Wikipedia, emails, ......)
When I up graded to iPad Air everything transfered over. Thus pictures are stored in "Camera Roll".
This still does not explain why pictures taked on the iPad are not saved anywhere.
Thanks for the response.

Why does the color change in my forms when I hover with mouse?

I have cgi script with several forms.
The default font color on my forms is black.
On new firefox, when I hover the form area with my mouse the fonts turn green. Why?

Hi Tara ,
Please refer to the following links and see how it goes .
https://helpx.adobe.com/acrobat/using/advanced-pdf-print-settings.html
http://docs.oracle.com/cd/E19728-01/820-2550/printing_pdffonts.html
Regards
Sukrit Dhingra

Camera Connector not working anymore with iPod Video

Hello,
I have a iPod Video 60GB which I bought last year along with a Camera Connector.
The problem I have, is that the Connector isn't recognised by the iPod anymore. Even when the camera is on and connected at the other end. The camera is a Sony DSC-V3 which has worked fine before.
But, I'm assuming the problem is with the Connector since, before the iPod would recognise the connector and show the 'connect device' screen.
The iPod still says, 'connect device', when I go through the menu and choose Photo>Photo Import
I've been tearing my hair out for over a week with this, with no luck.
Any insight as to how I could fix this? Also, has anyone else come across a similar problem?
Thanks and best regards,
Chris
Intel P4 Windows XP Pro

i'm no expert on this topic. but, fingers crossed, the troubleshooting suggestions in these documents might be of some help:
How to use the iPod Camera Connector
iPod Camera Connector: Choosing a photo importing protocol on a camera

B560 4330 PROBLEM WITH CAMERA, WILL NOT START

First of all, there seems to be no forum on here that is listed for the B560... so move it if you need to.
I have a new B560 4330. The camera is listed as working fine in the DM, but will not provide any picture in any application. I have tried re-installing the energy manager, but that did NOTHING! No, nothing happens when I press FN+ESC either.
Please help, thanks!

possible hardware issue. at this point, i don't think we can help you. please, contact lenovo support line for further informations and guides for 'how to ship it back to service'

Hi, I have an iMac running Mavericks that I am trying to hook up an older HDTV as a second HD monitor through the minidisplay port to component 3 color RCA. HDMI is not an option with this set. I have SD working, but need to find a HD conversion set up.

Presently I have a mini display port>VGA adaptor, running to a convertor box I picked up that handles S-video out, which is working fine for SD. I also have a VGA to Component Video (5 wire RCA) adaptor cable. Connecting Component adaptor dircetly to the mini display adaptor doesn't seem to work, neither does plugging it into a VGA port on the SD convertor box. I am guessing there is another convertor box out there that will help me make the transition from mini display to Component. Even if it means having a handful of adaptors plugged in. does anyone know where to find such a wonderful and magical device?
Thanks

Your setup works fine for DV, because you used a DV deck and most likely DV footage. But now you are working with 720p HD footage (what format, BTW? HDV, dvcpro HD?). That same setup won't work for monitoring HD. Now you need an HD box or card to send out a proper HD signal. And since you have an older G5, you won't find any current solutions. You'll have to look at used capture cards that are PCIx. Or you and look at the Matrox MXO, that connects to the computer via a monitor connection. DVI.

Network Homes issue with printing presets not the same with each mac logged into

Hi
I have a SMB who use a ML Server with network homes, each user logs into any of the iMacs in the building and their home mounts.
No issues their my problem is that printings wise each iMac has the same printers set up with the same name but if a user sets a preset on a printer this preset does not appear when they log onto another computer.
If you look in their ~/Library/Preferences the preset is their.
Help
If you do not understand question say so i will try and re word this.

Hi
I have a SMB who use a ML Server with network homes, each user logs into any of the iMacs in the building and their home mounts.
No issues their my problem is that printings wise each iMac has the same printers set up with the same name but if a user sets a preset on a printer this preset does not appear when they log onto another computer.
If you look in their ~/Library/Preferences the preset is their.
Help
If you do not understand question say so i will try and re word this.

Recovery Slider: Color Changes with Camera Profiles, not so much with ACR 4.4 Profile?

Similar Messages

Maybe you are looking for