Recovery USB is not partitioning correctly and will not recover to factory.

Started a thread here but apparently only for US models
http://forums.toshiba.com/t5/System-...t/false#M24453

Originally Posted by Macius
I have made recovery installation many times and Ive never noticed some problems.
When you start recovery image installation a few steps will be performed:
1/ the whole HDD will be deleted and formatted
2/ new partitions will be created
3/ recovery image will be copied to recovery partition on the HDD
4/ recovery image will be installed
5/ Windows start and configuration
There must be some problem with the HDD.
Yes,HDD is full of bad sectors.
Found a spare HDD and installation is going ahead.

Similar Messages

  • I installed new 11.1.4 iTunes update and it took out my USB ports on my MAC and will not now power or connect my Itouch or iPhone to iTunes

    I installed new 11.1.4 iTunes update and it took out my USB ports on my MAC and will not now power or connect my Itouch or iPhone to iTunes

    Now my Iphone is connnecting but my Itouch is not connnecting since 11.1.4 update.  Come on and fix problem from your poor update. 

  • TS2771 My ipod touch gen 2 does not turn on and will not let me charge it.

    My ipod touch gen 2 does not turn on and will not let me charge it.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them.  When I do in iPhoto an exclamation surrounded by a triangle appears.  Though I can see the picture in the small tiles below it will not expand.

    Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them.  When I do in iPhoto an exclamation surrounded by a triangle appears.  Though I can see the picture in the small tiles below it will not expand.  I also cannot attach any of these pics into an e-mail or into any other file.  I have already went through all 3 Repair options and when that did not solve it went through a complete Rebuild.  Any Help?!  Any Suggestions on how to fix this?!  I have spent almost 2 days now going through all of the published help.
    I have backups going back 6 months - I have not had the real need to check every album before - but - all of my backups also have this same problem.

    The triangle with the ! indicates that the connection between the thumbnail and the orginal is missing - this can be caused by many things including database corruption and user action emoving the originals photos on urpose or by accident
    If the database is corrupted then rebuilding is the solution - backup and depress the option and command keys, launch iPhoto and rebuild your database  --  if the iPhoto rebuild does not cure the problem then download iPhoto Library manager and use its rebuild command which creates a totally new library leaving the existing one untouched
    If you have deleted the photos then you need to start over with a new library and import the photos you have not deleted into it
    You can select one of the problem photos and use the reveal original in finder commander (file menu) to see if the original is there - if it is a finder window will open showing it
    LN

  • When I attempt to reply or forward email, it says my server does not allow relaying and will not send.

    When I attempt to forward or reply emails. I get the error message that my server does not allow relaying and will not send.

    Some ISPs don't really handle you mail, they pass it off to another pipeline.  That is called relaying.  Some receiving servers will not accept relayed messages, as they are frequently associated with spammers.
    In some cases, I understand aol relays within thier own system, confusing the issue a little.
    Who is you mail provider?  If it is a big name, this should not be an issue.   As a test, if you have an alternate e mail account, like gmail, try to send a message from that account and see if it goes through.

  • IPod Touch will not power up and will not respond to itunes when plugged into a computer

    iPod Touch will not power up and will not respond to itunes when plugged to computer, have tried holding both buttons down for 10 secs like support suggest but nothing has happen. Any suggestions?

    Try the other actions here:
    iOS: Not responding or does not turn on

  • Ipad says I have not backed up and will not let me go to my settings

    My ipad says I have not backed up and will not let me go any further.  What do I need to do?

    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen, then let go of the buttons.

  • USB FAT32 is read only and will not format

    My usb is formated as FAT32. however it is read only, and will not format. here are some screen shots:
    http://gyazo.com/369a6b843d86ba0bcbd360ed89ea258c
    http://gyazo.com/f07905c5b27519cbefbab29719c88702
    http://gyazo.com/40d291c83b85e88c68ccc47a45b19f35
    http://gyazo.com/490462fb7b280be7483048b2e485b2b8
    not really sure what is wrong with it, any one have any suggestions?
    i mean it cant be trash now, there has to be some program that will fix it.

    Drive Partition and Format
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • I pod touch will not turn on and will not charge - just died - did not drop or spill water on it - HELP

    I pod touch will not turn on and will now not charge - just died - did not drop or spill water on it - HELP.  When I plug it into I-Tunes it says the IPOD is in recovery mode

    Have you tried to restore the iPod via iTunes on the computer? See the restoring topic on:
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
    If not successful, what happens when you try to restore the iPod?  Any error messages?

  • My wifi will not detect networks and will not search for other networks when I search for them. Do I need a new iPhone or can I fix it myself?

    My wifi is on and when it tries to find a wifi connection, the gray little circle just keeps spinning and will not detect our home wifi. I have tried to search for it and connect to it manually, but it will not search for the network name. I'm hoping I don't need a new phone so please help.

    The following may have something that will help: http://support.apple.com/kb/TS1398

  • HT1320 I have a new IPod Touch 5G, 32 gb and suddenly it will not turn on, and will not restore using UTunes.  Any help appreciated.

    I have tried many times to restore my  new IPod Touch 5G in I Tunes and it will not allow me to do it.  My Ipod will not turn on at all even when on a fresh charge.  Only displays the arrow leading up to ITunes logo.  I have tried the method of holding the home button and on button and this does not work.  Any help appreciated.
    My I Pod was working fine until the day I updated the software to 6.0.1.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • My ipod touch, of only 2 days , will not turn on and will not charge

    I purchace my I pod touch on friday, everything seem to work fine until last night. now it will not turn on or charge.

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              
    and
    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          

  • Ipad will not turn on and will not register on Itunes

    I clicked my Ipad on, it was sleeping, and it shut off.  I went ahead and tried to turn on afterwards but it froze on the black screen with the Apple logo in the middle.  I then tried to reset it by holding the home and power button for about 10 seconds.  The screen went blank and then the same thing happened where it froze with the Apple logo.  I let it die and after charging it I tried everything again.  Nothing different happened.  I let it die once more and now it will not seem to charge or even show up on Itunes.  I was hoping the update would work but I have not had a chance to before this new problem.

    Depending on the computer, sure they can.
    http://www.apple.com/batteries/ipad.html
    Charging Tips
    The quickest way to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter. When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode. Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.

  • TPM BIOS Dialog Asks To Clear TPM - Dialog is not touch sensitive and will not proceed

    When resetting Windows 10 on my Stream 8 it sends a request to the BIOS to clear the TPM after reaching 100%.  The problem is that this dialog is not touch aware.  I can't choose either option.  Powering down the tablet just brings this back up when turned on.  Holding vol down and powering up/down does the same.  I can't find any way past this dialog box. HP phone support (Joey) is an absolute disaster.  Joey blames Microsoft and believes it's his God-given right to do so and move on to the next call or, possibly, he just has no idea what he's doing.  In any event he seemed quite determined, to the point of argumentative, to pass the buck. I think if there were some way to attach a keyboard I could get past this.  I tried a bluetooth mouse, but it wasn't paired beforehand and doesn't seem to work.  I was told by Best Buy that a USB/Micro USB adapator will not work with a standard USB keyboard (never tried it, seems dubious to me). Any ideas?  

    Thanks Olrs. That did work!  I had seen a couple of posts that said to hold the down button with the power button but that didn't help.  Both buttons performed a BIOS restore and then the reset completed normally. I do kind of wonder if the TPM was wiped or not (it would have to be stored in a different location than the BIOS to not get wiped I guess). That answer would have taken HP phone support one tenth of the time they spent arguing with me over this, and, like I said, it really wasn't a Microsoft issue at all.

  • My ipod will not turn on and will not show up on my itunes

    I've never had any issues with my iPod touch before and used it frequently. I quit using it for a couple of months and it wouldn't turn on. I left it plugged in for almost a whole day, and nothing changed. I tried resetting the iPod but hitting the home and power button until the apple logo appeared, and still nothing. I tried plugging my iPod into my Mac to restore it on itunes, and itunes will not even recognize the device. Please help!

    See Here...
    Frozen or unresponsive iPod touch
    Try this First...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430
    See Here for Device Not Recognised...
    http://support.apple.com/kb/ts1591

Maybe you are looking for

  • How do I sync an iphone to a new computer without losing the content

    My wife's iphone was originally synced to my old mac.  Now she wants me to add some music from a cd to her iphone and I can't figure out a way to do it without erasing what is already on there.  How can I add the additional tracks to her phone withou

  • Routing based on header record RECPOR in IDOC File

    I am working a flat file (actually, its an IDOC file) that will enter the configuration scenario through a Seebruger SFTP adatper.  Since this is a flat file, and not XML, I need to convert this to XML prior to doing content based routing in the rece

  • How to use employee Skills in work center

    Dear PP Gurus, How can I map various skills employee in on work center? Example a work center consist of 10 work men out of which 4 are highly skilled, 3 are skilled and 3 are semi skilled. How can I map this in one work cnetr and use for capacity pl

  • Deploy Integration Content menu cannot be found in Eclipse.

    HI, I m new to Integration and im doing HCI integration from Customer master form ERP to C4C using HCI(Eclipse Kelper). when i right click on the Project im unable to find the "Deploy Integration Content"  menu as shown in the figure. Can any one sug

  • Will this chip work in a powerbook?

    my family is all getting me compusa gift cards this year for christmas and I plan to get a 1GB memory chip with them...will this chip work in my 1.5 GHz PB...? http://www.compusa.com/products/productinfo.asp?productcode=318419&pfp=SEARCH