Recovery without a USB drive or DVD drive

I just received a NB305 as a gift and want to create recovery media. I do not want to spend the money for a large capacity USB drive or a DVD drive. I have an external HDD I use to back up my other laptops. Can I copy the files over to that drive? Can I copy the files over to that drive and then run the recovery software to make disks?
Why is Toshiba so cheap that they didn't include a recovery disk?

they all put it on the hdd no. if you read your users manual then you would know that pressing zero during start up would run the recovery service. and it is a netbook. there is no dvd drive what good would recovery discs do? just get a 16gb flash drive or an external dvd drive to make the recovery media. or you can just hope the recovery partitions dont get damaged but i wouldnt count on it.
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

Similar Messages

Portege R500: XP installation with USB external CD/DVD drive - SOLUTION

Hello all !
Just wanted to take five minutes to inform you that installing XP on a Portege R500 with USB external CD/DVD drive is possible, even if you already have erased Vista and only with a bootable CD of Win XP in hand.
First go into your BIOS and check / set first boot device is CD/DVD drive
Start your installation of win XP from the CD without the F6 thing and let it go his way
After a while, the installation stops and says "can't find the file xxxx" and you are invited to say where this file is
You "just" have to replace the drive letter "C:" that is given by default with the drive letter of your CD/DVD (and let the rest just like it is) and the installation will continue until the next "can't find..." and you will again replace the drive letter, etc..
After a complete "manually assisted automatic" installation, you are welcome in Win XP !
Next question is "Where can I find my CD/DVD drive letter ?" and the answer is "this is the next letter after your last HDD letter" (I consider you have only your Portege with nothing else plugged than your CD/DVD) so in most cases it will be "E" because C: is the first partition of your HDD and D: is the hidden / recovery partition that win creates.
But do not worry, if you type the wrong letter you will have as many tries as you wish until you find the good one and for the following "can't find..." it will remain the same.
I hope these pieces of information will help some of you who want a clean install of win XP starting from a newly formatted HDD.
With kind Regards,
Mage.

What a great information!
Thanks a lot for this posting.
I think it could be useful for others here.
Bye

Secondary hard drive and dvd drive have the same location id's.

Product Name: HP Pavilion dv7 Notebook PC (DV7t-7000)
PRODUCT NUMBER: A5F92AV
SERIAL NUMBER: [removed for privacy]
My Secondary hard drive and dvd drive have the same location id's. The dvd drive can not write to any disk because of it. Had the dvd drive replaced and that did not help. Tried 3 different HDD and all the same outcome.
Secondary hard drive and dvd drive have the same location id's. The dvd drive can not write to any disk because of it. Had the dvd drive replaced and that did not help. Tried 3 different HDD and all the same outcome.
Please help,
Thank you
-Rick

This is what chat support said... Its like talking to yourself sometimes!!
[Wednesday, October 24, 2012 10:33 PM] -- Automatically generated message:
Your support request has been submitted and is in queue. Please wait momentarily while the system connects you with the next available support specialist.
[Wednesday, October 24, 2012 10:46 PM] -- Automatically generated message:
You are now chatting with support specialist JOLLY R.
[Wednesday, October 24, 2012 10:46 PM] -- JOLLY R says:
Welcome to HP Total Care for Notebook and Desktop support. My name is Jolly. I will be your technical support specialist today. Please give me a few moments to review your issue description details.
NOTE: For security reasons, PLEASE DO NOT send credit card information via chat.
[Wednesday, October 24, 2012 10:46 PM] -- JOLLY R says:
How are you doing today ?
[Wednesday, October 24, 2012 10:46 PM] -- Rick Friedman says:
Hi Jolly, I tried 3 different HDD's all of them were reformated and reimaged with the HP image from this laptop. When I try to populate the drive, it just closes the window. Same with the dvd drive. Other then no able to write to the dvd/cd drive, everything else is perfect. But that is not good enough...
[Wednesday, October 24, 2012 10:46 PM] -- Rick Friedman says:
Great, you?
[Wednesday, October 24, 2012 10:46 PM] -- JOLLY R says:
I am fine. Thank you for asking.
[Wednesday, October 24, 2012 10:48 PM] -- JOLLY R says:
Please let me know if the following details are correct for the notebook in question.
PRODUCT NUMBER: A5F92AV
SERIAL NUMBER: {Private Information Removed}
EMAIL ADDRESS: {Private Information Removed}
Am I correct?
[Wednesday, October 24, 2012 10:48 PM] -- Rick Friedman says:
Yes
[Wednesday, October 24, 2012 10:48 PM] -- JOLLY R says:
Thank You for confirming the details.
[Wednesday, October 24, 2012 10:49 PM] -- JOLLY R says:
Are you using the same notebook to chat with me which is in question?
[Wednesday, October 24, 2012 10:49 PM] -- Rick Friedman says:
Yes
[Wednesday, October 24, 2012 10:51 PM] -- JOLLY R says:
May I know since when you are facing the issue?
[Wednesday, October 24, 2012 10:51 PM] -- Rick Friedman says:
I few weeks ago now
[Wednesday, October 24, 2012 10:52 PM] -- Rick Friedman says:
HP swapped out the DVD drive and I swapped out the HDD's
[Wednesday, October 24, 2012 10:53 PM] -- JOLLY R says:
Please click on the start button and click on computer.
[Wednesday, October 24, 2012 10:53 PM] -- Rick Friedman says:
Reimaged, renamed, removed, rotated them to different bays.
[Wednesday, October 24, 2012 10:53 PM] -- Rick Friedman says:
ok
[Wednesday, October 24, 2012 10:53 PM] -- Rick Friedman says:
Open\
[Wednesday, October 24, 2012 10:53 PM] -- JOLLY R says:
Is the CD/DVD drive getting detected ?
[Wednesday, October 24, 2012 10:54 PM] -- Rick Friedman says:
Yes
[Wednesday, October 24, 2012 10:54 PM] -- Rick Friedman says:
Yes
[Wednesday, October 24, 2012 10:55 PM] -- JOLLY R says:
So you need te reseat the CD/DVD drive and the hard drive .
[Wednesday, October 24, 2012 10:55 PM] -- Rick Friedman says:
I did, over and over and over
[Wednesday, October 24, 2012 10:55 PM] -- JOLLY R says:
Okay
[Wednesday, October 24, 2012 10:56 PM] -- Rick Friedman says:
I have swapped out the dvd drive and hard drives
[Wednesday, October 24, 2012 10:57 PM] -- JOLLY R says:
Since you have already reseated the hard drive and CD/DVD drive, you need to send the notebook in for a bench repair.
[Wednesday, October 24, 2012 10:57 PM] -- JOLLY R says:
It will be a mail in repair service. I will send you a box along with packaging materials and a prepaid shipping label. Once you pack your notebook in the box you can drop it off at you nearest fedex drop box or you can schedule a pickup.
[Wednesday, October 24, 2012 10:57 PM] -- JOLLY R says:
Box would contain- packaging material, shipping instructions & pre-paid shipping label.
• Once you receive the box you need to put the notebook inside the box (without any accessories), call fed-ex- (1800-463-3339).
• Fed-ex would come at your place pick it up and send it back to hp.
• This service will cost you $0.00
• Standard turn around time for service is 7-9 business days.
You can check the status of your order by going to: www.hp.com/go/csostatus or by calling HP Customer Care at 1-800-hpinvent (1-800-474-6836).
Your repair service has an estimated turn around time of 7 to 9 business days from when we receive your product at our repair center.
[Wednesday, October 24, 2012 10:57 PM] -- JOLLY R says:
In order to set up a service request please provide the following information:
* Full Name:
* Mailing Address (No P.O. Boxes):
* Apartment/Building/Mailstop:
* City:
* State:
* Zip/Postal Code:
* E-Mail address
* Phone Number (including area code):
* Best time to call
* Time zone of your region
[Wednesday, October 24, 2012 10:57 PM] -- Rick Friedman says:
Dont I have on-site?
[Wednesday, October 24, 2012 10:58 PM] -- JOLLY R says:
Let me check.
[Wednesday, October 24, 2012 10:59 PM] -- Rick Friedman says:
This laptop is my life, my livelyhood.
[Wednesday, October 24, 2012 10:59 PM] -- Rick Friedman says:
I can not be without iot...
[Wednesday, October 24, 2012 11:00 PM] -- JOLLY R says:
I do understand that .
[Wednesday, October 24, 2012 11:02 PM] -- JOLLY R says:
Yes, you do have onsite , but a technician can be sent to your place only if any part needs to be replaced .
[Wednesday, October 24, 2012 11:02 PM] -- JOLLY R says:
As the notebook needs to be repaired , you have to send it to the HP service center.
[Wednesday, October 24, 2012 11:02 PM] -- Rick Friedman says:
It is the motherboard
[Wednesday, October 24, 2012 11:03 PM] -- Rick Friedman says:
What is the difference between repair and replaced?
[Wednesday, October 24, 2012 11:03 PM] -- JOLLY R says:
It will be repaired and returned back to you .
[Wednesday, October 24, 2012 11:04 PM] -- Rick Friedman says:
But what is there to be repaired if your not replacing anything?
[Wednesday, October 24, 2012 11:04 PM] -- JOLLY R says:
If any hardware part needs to be replaced , a technician can be sent to your place .
[Wednesday, October 24, 2012 11:04 PM] -- JOLLY R says:
But since the notebook needs to be repaired ,you have to send it .
[Wednesday, October 24, 2012 11:05 PM] -- Rick Friedman says:
What is the difference between repaired and replacing something... So you mean that nothing will be repaired on my laptop?
[Wednesday, October 24, 2012 11:06 PM] -- Rick Friedman says:
This is NOT right
[Wednesday, October 24, 2012 11:06 PM] -- JOLLY R says:
I mentioned earlier that you need to send the notebook for repair.
[Wednesday, October 24, 2012 11:06 PM] -- Rick Friedman says:
I would like to talk to someone about this.
[Wednesday, October 24, 2012 11:06 PM] -- JOLLY R says:
It will be repaired and returned back to you .
[Wednesday, October 24, 2012 11:07 PM] -- Rick Friedman says:
What is the turn around time on this?
[Wednesday, October 24, 2012 11:07 PM] -- JOLLY R says:
It is 7 to 9 business days.
[Wednesday, October 24, 2012 11:08 PM] -- Rick Friedman says:
NO WAYYYY!
[Wednesday, October 24, 2012 11:08 PM] -- JOLLY R says:
If you want to talk to someone , you need to call our voice support in the direct number 1-800-474-68386 and refer to serviceticket number - {Private Information Removed}.
[Wednesday, October 24, 2012 11:08 PM] -- Rick Friedman says:
OK, thx
[Wednesday, October 24, 2012 11:08 PM] -- JOLLY R says:
We also have an expedite shipment, where the turn around time is 4 to 6 business days .
[Wednesday, October 24, 2012 11:09 PM] -- JOLLY R says:
Please take down the service ticket number {Private Information Removed} and SR ID {Private Information Removed} for future reference.
[Wednesday, October 24, 2012 11:09 PM] -- JOLLY R says:
You are welcome.
[Wednesday, October 24, 2012 11:09 PM] -- JOLLY R says:
Is there anything else apart from this I can help you with now ?
[Wednesday, October 24, 2012 11:09 PM] -- Rick Friedman says:
No
[Wednesday, October 24, 2012 11:09 PM] -- JOLLY R says:
Thank you

CD Drive or DVD drive is missing or is not recognized by Windows or other programs - this happens any time I upgrade itunes

I just upgraded to the new version of itunes for my ipod touch. My CD Drive or DVD drive is missing or is not recognized by Windows or other programs occurs and it does not show up listed as part of my computer. How can I fix this?

Your DVD drive? Why would this be missing after a iTunes download?

Legacy IDE Hard Drive and DVD Drive

I wondered if anybody could send me in the right direction with this...
I have got the A55M-E33 motherboard and try to connect my old hard-drive and DVD drive (both IDE) to the motherboard using IDE to SATA converters. The BIOS detects both drives, however I don't think I got the right BIOS settings to accommodate the way the drives should be addressed. Has somebody used this kind of setup and would kindly share their experience please?
Thanks

what doesn't work?
also provide detailed system specifications, see >>Posting Guide<<

IBook hard drive / cd\dvd drive errors

So my friend's old iBook finally went down, he nearly lost all of his data on it due to hard drive failure.
So I went about and replaced the hard drive with another one from my spare laptop. I got it booting up and installed Tiger, but I realized a strange error, the iBook kept going to sleep when the screen was slightly moved. So I went about and fixed that.
Somewhere along the lines however, the hard drive and dvd drives stopped registering in the boot process. At first I thought I had fried the motherboard or something, but I popped the hard drive into a firewire external reader and booted the iBook from it just fine.
When I power it on, I can hear it read the OS X install disk and spin the hard drive a little bit, but after that it will stop reading them completely and boot from the external drive. I have the cable settings correct, and aside from that I tested all of the possible configurations I could do.
At this point, I figured the cable that the HD/DVD drives are connected to was severed partly, and I ordered another one off ebay. I went to test it and the iBook is still doing the same thing.
It is a 600 mhz laptop with 256 mb ram. Any help is greatly appreciated.

Somewhere along the lines however, the hard drive and dvd drives stopped registering in the boot process. At first I thought I had fried the motherboard or something, but I popped the hard drive into a firewire external reader and booted the iBook from it just fine.
I can't be certain, but it's entirely possible that the motherboard is damaged. Booting from a Firewire case wouldn't require the ATA interface to be functioning, so if that chip was damaged, perhaps due to static shock, that would explain both the hard drive and optical drive failing.
Presuming you have indeed confirmed the correct master/slave settings on the drive, try resetting the iBook's PMU:
http://support.apple.com/kb/HT1431
If that doesn't help, you may indeed have a component failure on the main logic board.
Good luck.
Message was edited by: Dave Sawyer

Cd drive and dvd drive~~~~help

i have install the software that come with the ipod
after i reboot the pc,
my cd drive and dvd drive are disappear in my computer
what can i do, to get my cd drive and dvd drive back?
Windows XP

Happens, its a commonly documented error with Windows and alot of burning software installed on one machine.
Your going to have to work thru this article to resolve it. Now it is going to be in the registry to fix it. Which is pretty indepth. The document works tho. Used to work for a company that wrote burning software and we did this on a hourly basis. If your not comfortable, your going to need to find someone who is experenced in the registry.

How can i restore from Recovery Disk if my notebook's hard drive and dvd drives are dead.

Hi. Good day. My hard drive just crashed and im trying to restore from my restore disks. Unfortunately, my dvd is dead too. I copied the recovery disks to a new hard drive and tried booting from a flash drive but the noteebook is still giving me the SMART hd error message. Please help. Thanks.

Hi,
If you have, or can borrow an external CD/DVD drive it would be worth trying this although I'm not certain your notebook will support booting from a drive connected via USB.
Another option may be to see if you can find a second hand optical drive on somewhere like Ebay - the drives compatible with your notebook can be found on Page 59 of your Maintenance & Service Guide. It may even be worth removing a re-seating your existing drive just in case this helps as described in this section.
Does the drive show up in Device Manager? If it does, right click it and select Properties. Select the driver tab and see if there is an error code in the status box.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Can i install logic pro without the cd because my dvd driver of my mac doesn't work . i have the key for logic pro

can i install logic pro without cd ? , i have the key for the logic pro but my dvd driver of my mac doesnt work ?

Buy an external USB2 DVD/CD drive..... (Amazon's Basic model works great)
Or..
Borrow someone else's Mac that has a DVD drive fitted and use that via Remote Disk
Note:
There is no legal means of downloading available for Logic Pro 9.. unless you originally purchased it via the App Store..
Therefore, in your case, you must install from the DVDs you have...

What's easier? Replacing pram battery or hard drive and dvd drive?

I have a dead imac g4 flat panel with all my files and a dvd drive. I have a working imac same year, same processor but with only a cd drive.
First, I want my files.
Then, I wouldn't mind keeping one of them as a dvd player.
Would appreciate any suggestions!
(I don't actually know if it is the battery or power supply which is dead.)

My experiences lately with my NEW (to me) 20" iMac G4.
1.25 GHZ PPC 1 GB RAM 160 GB HDD
Purchased on eBay in the orginal box for $349.00 delivered.
When the computer arrive it appeared to be in excellent shape. It turned on and operated without any problems. I really purchased as a project, and intended to restore to as NEW as possible. The iMac arrive with the usual specification for the model (born on date 3/2004). Specification were 1.25 GHZ PPC, 1GB RAM 512/slot.
So I purchased some parts to get started (like I said above everything worked).
1. OWC RAM 1GB/slot for a total of 2BG's ($55.98/Free shipping)
http://eshop.macsales.com/item/Other%20World%20Computing/2700DDRS1GBA/
http://eshop.macsales.com/item/Other%20World%20Computing/2700DDR1024/
2. OWC PRAM battery ($3.99/free shipping)
http://eshop.macsales.com/item/NewerTech/BAA36VPRAM/
3. OWC LG internal Optical Drive ($45.99/free shipping)
http://eshop.macsales.com/shop/optical-drives/superdrives/imac/g4
4. IOGEAR Bluetooth (ver 2.1) Adapter (USB 2.0 Micro) ($13.99/free shipping)
http://www.newegg.com/Product/Product.aspx?Item=N82E16833139019
5. Apple Wireless Magic Mouse (had a spare)
6. Apple USB Keyboard (newest) (had a spare)
Before installing the parts I cleaned out the dust and grim (nasty dirty), removed the Fan and cleaned (nasty dirty), I also removed the Thermal Grease and applied new Thermal Grease (used Artic Silver 5 Thermal Compound). I used a powerful vaccum and a air compressor (120 psi), and damp Q-Tips.
On the outter shell and back of monitor I used SoftScrub/Bleach lite scrub and then rinsed with a damp cotton rag (looks brand NEW). Was sure to remove ALL of the SoftScrub.
On the screen I used iKlear and a iKlear cleaning cloth, screen is in MINT condition.
Honestly the computer looks and operates much better than I had anticipated.
I really didn't need to install a new Optical drive in the 20" but it was a cheap upgrade. And so. I have a iMac G4 17" with the same spec's as the 20" iMac so I opted to install the 20" iMac's Optical drive in the 17" iMac. The 17" would only play CD'd and not DVD's.
After putting everything back together I installed Leopard 10.5.6, then upgraded to 10.5.8. I installed Quicktime 7.7 for Leopard and iTunes 10.6.3. Installed iLife09 (no iMovie), iWorks09, Superduper (latest), and Disk Warrior 4.4,
I chose not to upgrade the HDD simple because it is working fine and I don't have any critical information stored on it.
My final upgrade would be to install a new FAN but I'll wait on that for a while. Since the Fan operates fine it does have a very, very slight whine meaning the bearings are starting to wear a bit. Probably because of the dirt and grime that was on there from before.
I would like to buy a NEW Fan to install but right now the only option is to buy a Apple Fan (part# 622-6215). I wouldn't mind a non OEM Fan but the little fins on the side of the Fan's walls are a concern for proper air flow.
http://www.welovemacs.com/9226215.html ($69.95 + $4.50 shipping).

ITunes for 64bit Windows 7 Driver/CD/DVD/Drive Issues-

Hi There
I am sure that there are many many users out there suffering the same frustration as me in regard to ITunes just not working properly with Windoews 7 (64Bit).
I have been trying to solve the mystery of "ITunes for Windows Registry Settings Warning When Opening Itunes.
I have tried all the recommended actions to correct this problem without any success and I do mean ALL.
Below is a screen shot of my registry, can anyone see anything wrong with it?
In the meantime (Last four months) I have stopped using ITunes and instead have used Digital 7, this will be my very last attempt to get ITunes working properly, failure will mean consigning ITunes to the same place as any other Software that does not do wshat it says on the can.
I hope someone can help.

That's good that it is in device manager, but what about in Computer with the rest of the drivers?
Also, are the drives listed in Computer and device manager or just device manager?
I want to verify if the symptoms are present for a particular software issue before looking at other issues. I really doubt it is a driver issue at this point. If it was, then I suspect the issue would be present from day one.
It could be that the lens has dust buildup preventing it from working properly. They do make CD cleaning kits that have a special CD designed to clean the laser as it passes over the lens. If you happen to have one of these, or access to one, I recommend trying this step to make sure it isn't as simple as dust buildup interfering with the laser.
It could also be hardware failure, but I would like to try a few other steps before coming to that conclusion.
It may be worth reviewing this document as it covers a lot of the most common issues behind DVD drive issues. Feel free to skip any steps you have already tried.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

TS1989 My iMac G5 has flashing question mark folder, no hard drive, no DVD-drive, no target drive - help?

A friend has 'kindly' decided to upgrade my father in law's iMac G5 and apparently found that it ceased to work following an aborted process. I have no idea what he's done but there was a Leopard DVD in the optical drive. The iMac boots to the smiley face folder but scrolls through 2 black screens and one grey screen first. A question mark appears at first then it changes to the smiley face folder with the question mark appearing occasionally.
I cannot get the iMac to see either a hard drive or the DVD drive. No start up disc at all. I have tried starting up in target mode and the target mode sign doesn't appear on the screen nor does the hard drive show on the other mac.
Starting up holding down either 'C', 'X' or 'R' doesn't produce any results. Starting up with 'alt' pressed down produces a screen with a padlock image followed by a white slot to write a password in and a greyish button with an arrow. None of the passwords associated with the machine have got us past this screen.
I can also get a command line on screen by holding down the startup button, hearing a loud beeeeep (firmware update signal?) keep holding down and a white screen with very small text invites me either to write 'mac-boot' or 'shut-down'. Both commands require a password to be effective and so do not work.
Following startup troubleshooting advice has allowed me to identify that there is both a start up button inside and an SMU reset button. Three of the four led's come on fine and there are no problems with the starter button on the back panel.
I'm loath to change the hard drive at this point as I'm not sure if the HD is duff or something is wrong with the hardware and that another HD would be damaged.
Stumped.

I'll copy what BD wrote:
Is it a USB KB or flakey Wifi?
< be sure to use a usb keyboard >
Your suggestion of removing the PRAM Battery and all power & peripherals was great.
< I didn't think of disconnecting the peripherals. Do it. >
I think also, removing all RAM, Iif possible), then trying to start it a few times, might do it to.
Firmware password protection in Mac OS X ...
http://support.apple.com/kb/HT1352
It would block usage of all the startup keys, like C, N, T, D, CMD+s, CMD+Option+p+r, CMD +v, Option boot will show a lock, and Shift, as well as booting from anything but the Hard Drive.
Force Removing Password Protection
1) Add or remove DIMMs to change the total amount of RAM in the computer.
2) Then, the PRAM must be reset 3 times. (Command + Option + P + R).
http://www.securemac.com/openfirmwarepasswordprotection.php
Thanks BD.
Robert

Where can I download Hp DVDRAM GU70N driver for DVD drive?

I need the following driver but cannot seem to find it. The HP Assistant does not seem to let one search for drivers just updates. Please need help.

CherylG wrote:
Drivers for CD/DVD drives are normally provided by the OS. Software adds extra functions. What problems are you trying to solve?
When I load a CD or DVD into the drive teh laptop does not see the DVD or CD so I cannot download data or see a movie. When I run the diagnostic ot tells me that the HP DVDRAM GU70N SATA CDROM Driver is bad. It tries to use the data on the recovery disk of the OS but this does not fix the problem. Hence I think I need a new driver installation file.
Any sugggestions

Hard drive and dvd drive - simultaneous failure

Hi
I'm running a 2yr 8 month old PowerPC. G4 1.67ghz with 2gb RAM. Until today, it's been pretty much faultless. I have had issues in the past related to installing updates from Mac. ie. on two separate occasions I took updates only to find that the machine wouldn't re-boot. Issues were resolved using install disks, disk warrior and/or repeated booting.
Anyway - today:
I installed the update (Security Update 2008-003 (power PC)). Restarted and all was fine. Sometime later, after considerable use, the machine went to sleep. When I tried to wake it it wouldn't do anything. Eventually a blank grey screen came up with the file icon which alternately flashed a question mark and the finder icon.
I looked on these boards for suggestions. The best one seemed to be boot from the install disks. Unfortunately there is already an audio disk in the drive. I looked for suggestions to eject but none worked. Eventually, I plugged in my bootable clone of my harddrive. The machine took matters into its own hands and booted from it.
Once up and running I ran disk utility to check the status of the internal drive. It doesn't come up in the display. Nor does it show on the desktop or the in the finder. Which suggests to me that it's died.
I then looked to see if I could eject the cd from the DVD drive. i found no icon for the cd on the desktop or in the finder. I checked the "about this mac page" and it tells me "No burning device was found." This in turn suggests that the DVD burner has failed along with the hard drive.
My immediate thought would be that both parts have just reached the end of their time and given up the ghost. I'm a bit surprised/suspicious though that they seem to have done so in the same moment. And on the day that I downloaded a Security Update.
Has anyone had a similar problem, if so what did you do? Can anyone suggest anything I may not have thought of to find my missing HD and DVD burner? Would I be best off going to the Mac store in London? Ultimately, is replacing them myself a realistic proposition?
Help appreciated.
Ewan

Thanks Arnie
Have been thinking along those lines. Especially as, when I boot the machine from the external drive, I can hear the DVD drive whirring. So it's clearly not completely dead.
e

DVD RW Drive and DVD Drive pop up

Compaq Presario Sr1950nx Converted to Windows 7.
When I put a disc in " DVD RW Drive (D) or DVD Drive (E). There is no screen that pops up. I have to go in and open them.
How can I make the screen open automaticly.
This question was solved.
View Solution.

Have you looked at your AutoPlay settings?
what is autoplay: http://windows.microsoft.com/en-us/windows/change-autoplay-settings#1TC=windows-7
FAQ tutorial: http://windows.microsoft.com/en-us/windows/autoplay-faq#1TC=windows-7
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Recovery without a USB drive or DVD drive

Similar Messages

Maybe you are looking for