Recreate a report in BI Landscape which is present in BW

Hi All,
Need to recreate a report in BI Landscape which is present in BW. kindly suggest as how to proceed with this?
Kind Regards
Nishi

Hi,
Before going to create the report in the BI first you can check weather all the patches and notes are applied or not? because some reports if you create in 3.2 it will not open in BI7.
suppose if you changed teh queries in BI7 again you can't change that in 3.5 query designer.it will not alllow you to change.
if patches are installed properly you can opem all tha queried whatever u created in 3.5 those can open in BI& easyly.
Regards,
Chandra.

Similar Messages

Change Report Layout to Landscape

Hi,
There is one Print Icon available at the below of the page in dashboard.
We have the requirment to change the report layout to landscape view when printing through PDF option.
Any way through which we can achieve this?
Regards

Go to edit dashboard ->Next to add a page icon, you see a print option..if you change it to landscape then you can print it in landscape view..

Popularity trend/usage report is not working in sp2013. Data was not being processed to EVENT STORE folder which was present under the Analytics_GUID folder.

Hi
I am working in a sharepoint migration project. We have migrated one SharePoint project from moss2007 to sp2013. Issue is when we are clicking on Popularity trend > usage report, it is throwing an error.
Issue: The data was not being processed to EVENT STORE folder which was present under the
Analytics_GUID folder. Also data was not present in the Analytical Store database.
In log viewer I have found the bellow error.
HIGH -
SearchServiceApplicationProxy::GetAnalyticsEventTypeDefinitions--Error occured: System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly
secured fault was received from the other party.
UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
HIGH - Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly secured fault was received from the other party.
CRITICAL - A failure was reported when trying to invoke a service application:
EndpointFailure Process Name: w3wp Process ID: 13960 AppDomain Name: /LM/W3SVC/767692721/ROOT-1-130480636828071139 AppDomain ID: 2 Service Application Uri: urn:schemas-microsoft-
UNEXPECTED - Could not retrieve analytics event definitions for
https://XXX System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
I have verified few things in server which are mentioned below
Two timer jobs (Microsoft SharePoint Foundation Usage Data Processing, Microsoft SharePoint Foundation Usage Data Import) are running fine.
APPFabric Caching service has been started.
Analytics_GUID folder has been
shared with
WSS_ADMIN_WPG and WSS_WPG and Read/Write access was granted
.usage files are getting created and also the temporary(.tmp) file has been created.
uasage logging database for uasage data being transported. The data is available.
Please provide pointers on what needs to be done.

Hi Nabhendu,
According to your description, my understanding is that you could not use popularity trend after you migrated SharePoint 2007 to SharePoint 2013.
In SharePoint 2013, the analytics functionality is a part of the search component. There is an article for troubleshooting SharePoint 2013 Web Analytics, please take a look at:
Troubleshooting SharePoint 2013 Web Analytics
http://blog.fpweb.net/troubleshooting-sharepoint-2013-web-analytics/#.U8NyA_kabp4
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

I need the Log Report for the Data which i am uploading from SAP R/3.

Hi All,
I am BI 7.0 Platform with Support Patch 20.
I need the Log Report for the Data which i am uploading from SAP R/3.
I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item. In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
I capture the FS item from the Z table then update this FS item to Infobject FS item.
Now i need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
Please suggest.
Regards
nilesh

Hi.
Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
Regards
Jacob

How to generate a report for all Analyses which conatins a specific column

Hello Experts
I am trying to generate a report of all Analyses which contains a specific column. We are currently using OBIEE 11.1.1.7.0.
I have tried to use the command line options using ./runcat.sh, but did not find any arguments that can filter the analyses by a specific column used.
Any help is much appreciated.
Regards
Rakesh

Hi Rakesh,
SampleApp has your answer: everything is available for free, just copy/paste and run on your own instance.
http://slc02ojw.oracle.com:7780/analytics/saw.dll?Dashboard&PortalPath=%2Fshared%2F10.%20Lifecycle%20and%20Admin%2F_port…
(as long as this instance will be up...)
In the dashboard named "10.31 Webcat Analysis" you have a columns to analysis report where you select the presentation column and you get all the reports using it.
This dashboard require a script to be run on your catalog, it will parse it and extract all the column info (and many other interesting things) and load it in a database. The scripts are simple and well documented, so you can easily adapt them to your own environment.
If you want the script there is no miracle solution: download SampleApp and extract it (it's not small, but with all the great content it has we can't complain about that ...).

Tables report are stored in which db table

tables report are stored in which db table ?and can we do remote comparision between this in dev and prd

Hi,
Goto your report.
Display the source code.
Goto Utilities-----> versions--
> versions management
Click on remote comparision button.
On the pop-up which appears subsequently, enter the sys name with which u want to compare ur code.
<b>Reward if helpful</b>
Regards.
Pritha.

Is it OK to open a CR Report with JRC/Gemini which is modified by RAS SDK?

Dear all
Is it OK to open a CR Report with JRC/Gemini which is modified by RAS SDK? Especially after I use RAS SDK to change report database location.
I test it OK, but my Customer need to confirm this.
Thanks a lot.
David

RAS SDK - meaning RAS server?
There's intrinsic limitations for Crystal Reports Java (JRC for CR4E Version 2), such as database connectivity (only Java-based ones) when compared to RAS server.
But CRJ does support Crystal Reports 2008 reports within those limitations.
By the way, the new CR4E Version 2 Crystal Reports Java SDK is essentially the in-process RAS SDK - so you can make modifications using that. Note that JRC SDK (version 11.8 and below) are deprecated with CR4E Version 2), then new way si the the Crystal Reports Java SDK.
Sincerely,
Ted Ueda

Oracle report-how to change report layout to landscape?

Hi,
I am using Oracle report 6i. I want to change the report layout to Landscape. I had tried to go to 'page setup' and changed to 'landscape', but when I print, I still got portait layout.
Can anyone help me? Thanks.
Jun

Hi,
Easiest method for changing your reports orientation to Landscape is
Go to object navigator->System parameters->Orientation.
Set value of this system parameter as Landscape. Thats all. You also can set this property using srw. features at runtime.
Regards
Santa

How to change report layout to "Landscape"?

Hi,
I am using oracle 6i in window 98. I want to change my report layout to "Landscape"? How do I do it?
Thanks.
Jun

May I assume you're using Oracle Forms/ Reports 6i? If so, you probably want to post in the Forms or Reports forum.
Justin

LIV report similar to MRNB which list multiple POs

Hi All,
Report MRNB (Revaluation of logistics invoice verification) has a limitation, we can only get the retrospective pricing for a particular item of a single PO for a given interval.
Is there any standard LIV report similar to MRNB which gives retrospective pricing for a list of POs for a given interval.
Please guide.
Thanks in Advance,
Ritesh

thanks

How to report on a table which is in BW Side - Urgent

Hi,
We have requirement to create reports on the table tcurr which is present in BW Side.
Is there any way to report on it.
Thanks,
Arvind

Many ways - you can create ABAP queries (if it is one single table you can actually do with SE16 itself), or if you want to run a bex query, you can create a datasource in this table and create a virtual cube on top of that DS and create Bex queries.
There might be standard txns (check SPRO--General settings -- Exchange rate ; and other currency related txns ) which may work for you.

How to insert the data which is present in the variable into the table

Hi,
Let's consider that I have one table and I have stored the table column names in one variable and their values in another variable.
I want to insert the data that is present in the variables into the table.
I tried the following way :
Declare
V_columns    Varchar2(50) := 'Empno';
V_values       Number(10) := 101;
Begin
Insert Into Emp (V_columns) Values (V_values);
End;
The above procedure gives an error : PL?SQL : ORA-00904 : "V_COLUMNS": invalid identifier
Using the Execute Immediate, we can insert the data which is present in the variables into the table.
Is there any other way to insert the data which is present in the variable into the table..?
Can anyone please give me the solution..?
Thanks..

plz use this...
DECLARE
   v_columns   VARCHAR2 (50) := 'Empno';
   v_values    NUMBER (10)   := 101;
BEGIN
   EXECUTE IMMEDIATE    'Insert Into Emp ('
                     || v_columns
                     || ') Values ('
                     || v_values
                     || ')';
   COMMIT;
END;

Debug an USER-EXIT which is present inside an INCLUDE

Hi folks,
i want to debug a include ' LVEDFF0E.' which is present in the program 'SAPLVEDF.
my user exit 'ZXEDFU02' is present in the include LVEDFF0E . This exit is to change the IDOC segmants.
i want to debug my user exit which is present inside a include.i tried so many times but control is not going to that point.
can anybody tell me how to debug that exit???
correct answers will be rewarded.
Thanks & Regards

Hi,
Try this way
/h> choose "breakpoints" from menu> breakpoint at >function module> enter EXIT_SAPLVEDF_002 and press enter press f8
a®

How to execute a shell script which is present in remote machine using ODI

I have requirement of executing a batch (shell script) which is present in the remote machine.
i have an ODI agent in remote machine as well. I have created agent locally by using the remote machine IP and port.
I am able to test the agent successfully. But when i am executing the package using that agent it is failing with the following error
errorODI-1226: Step Execution of the Scenario REMOTE_DEMO version 001 fails after 1 attempt(s).
ODI-1241: Oracle Data Integrator tool execution fails.
Caused By: oracle.odi.runtime.agent.invocation.InvocationException: HTTP/1.1 500 ODI-1423: Warning connecting to Agent localagent: work repository WORKREP1 is not bound to the master
My Work Repository Name is : WORKREP1
Remote Work Repository Name is:WORKREP_LOCAL.
Could anyone please help me regarding this.
I can't download shell script and run it locally this needs to be run on that remote machine only.
Thanks
senthilkumar

This is the code.
1. we can declare types dynamically
2. Internal table dynamically
3. Select querry dynamically
just copy paste this code
Here is the code for your question
DATA:v_fieldname
TYPE fieldname,
l_PROG TYPE string,
v_mess TYPE string,
l_sid TYPE string,
wa_ddfields TYPE dntab.
DATA i_tab TYPE STANDARD TABLE OF string.
DATA:l_str TYPE string,
l_str1 TYPE string.
PARAMETERS matnr type marc-matnr.
end-of-SELECTION.
*build the subroutine pool
APPEND 'PROGRAM subpool.' TO i_tab.
APPEND `LOAD-OF-PROGRAM.` TO i_tab.
APPEND `DATA i_tab1 TYPE TABLE OF vbak.` TO i_tab.
APPEND `DATA l_rows TYPE i.` TO i_tab.
APPEND `select * into table i_tab1 from vbak.` To i_tab.
append 'DESCRIBE TABLE i_tab1 LINES l_rows.' to i_tab.
append 'Write : l_rows .' to i_tab.
GENERATE SUBROUTINE POOL i_tab NAME l_PROG
MESSAGE v_mess
SHORTDUMP-ID l_sid.
IF sy-subrc = 0.
PERFORM ('LOOP_AT_TAB') IN PROGRAM (l_PROG) IF FOUND.
ELSEIF sy-subrc = 4.
MESSAGE v_mess TYPE 'I'.
ELSEIF sy-subrc = 8.
MESSAGE l_sid TYPE 'I'.
ENDIF.
Edited by: vijay wankhade on Jan 1, 2009 5:34 PM
Edited by: vijay wankhade on Jan 1, 2009 5:34 PM

How to add users to group which is present in another AD domain?

Hi,
Using JNDI how to add user as a member of group which is present in another AD domain?
For example: In AD forest test.com their are two domain a.test.com and b.test.com. Group is present in a.test.com and I want to add user present in b.test.com as a member of the group.
Any pointer around this would be great help.

See the below link to get an idea on group types.
http://technet.microsoft.com/en-us/library/cc755692(v=ws.10).aspx
If the group is a universal group, you can just add members similar to local group even if user and group are in different domains. That is by setting the member attribute of the group.

Recreate a report in BI Landscape which is present in BW

Similar Messages

Maybe you are looking for