ReCreate Business System (ABAP AS) with the same name ? is this safe ?

Hi All,
Recently, I got problem with the business system (ABAP AS) in SLD suddently the BS type changed to Third Party after did some migration on the respective System.
The original ABAP system has been deleted and replace by new installed system with different client. So I am trying to change the client in SLD but I found that all technical system information missing in Business System. When I tried to choose the new technical system i only can see third party technical system (Meaning this BS has changed type to Thirdpart) Strange but it happen.
So i am planning to delete and recreate the Business System. is this correct and safe approach ? does it impact on the current scenarion ?
This is DEV system. We are using centralize SLD in PI Production Server.
Please advise
Thank You

Hi Stefan and Udo
Thank you very much for your response. It works for me now.
I have deleted and recreated again the BS in SLD, login to configuration, and refresh the adapter specific.
my last question before i am closing the forum. Since this is Development Environment is it necessary to transport after activated the BS (after adapter fresh) ? or just iqnore the object after activated.
At the moment i didn't because in the production the BS also will be converted to ECP BS by CTS+ during the transport.
would appreciate for you feedback.
Thank You and Best Regards
Fernand
Edited by: Fernad Lesmana on Jan 28, 2011 8:37 PM

Similar Messages

My iPad 1 has suddenly started to sync Events from my iPhoto library incorrectly. It seems to break down Events to separate dates - so if an Event was photographed over 2 days, it is showing as 2 separate events with the same name.

My iPad 1 has suddenly started to sync Events from my iPhoto library incorrectly. It seems to break down Events to separate dates - so if an Event was photographed over 2 days, it is showing as 2 separate events with the same name.

Posted this before I realised there is an update for the iPhoto app 9.1.3 which sorts the problem.

Use two VIs with the same name, different functionality on a single Project

Hi, I'm working with vision builder al labview, I need to integrate the vision builder migration Vis into my main program, (Is not an option), but I have multiple Vis autogenerated with the same name, how can i integrate them in the same project without dependency problems
Thanks in advance

Hi,
Unless you really need tight integration between the Vision code and the rest of your LabVIEW application, or would rather not have to pay for a Vision Builder AI runtime license on the targets on which you want to deploy your final application, I would recommend you look into using the Vision Builder AI LabVIEW API instead of migrating the inspection to LabVIEW.
The API allows to control Vision Builder AI by launching a Vision Builder AI engine, running the inspection and retrieving resulting images and results.
The advantage of the API is that it allows for easier modification and debugging of the Vision Inspection that you designed in Vision Builder, if you need to make changes later. (i.e. all you need to do is open the inspection in Vision Builder AI, modify parameters, add steps etc).
You won't have to change your LabVIEW application, unless you want to output additional results.
When you build and deploy your application, you will need to install Vision Builder AI on the target machine and get a runtime license for it.
Migrating the inspection to LabVIEW is a one way deal. If you need to make changes to the inspection, you will have to migrate the inspection again, or modify the code outside of the Vision Builder AI environment.
As you might have noticed, the code generated is quite complex, and it is recommended to go this route only if you need really tight integration/synchronization between the vision code and the rest or your LabVIEW code, or if you would rather pay for a cheaper Vision runtime license rather than a VBAI runtime license for the deployment machine (in case of deploying multiple systems where cost is a big consideration).
Vision Builder AI API examples are located in this folder:
C:\Program Files (x86)\National Instruments\Vision Builder AI\API Examples\LabVIEW Examples
Hope this helps clarify the use cases and help you make the right decision for your design.
Best regards,
Christophe

How to apply different keyboard shortcuts to an actions with the same name but in different menus within one application?

Hi,
Hopefully someone can help. I have the application "djay" and in two different menus there is the action "Eject". I was wondering if it's possible to apply different keyboard shortcuts to those actions with the same name? I can't see how to do it as it seems you can only write the action but as there are two it doesn't seem to work for me.
For example:
djay>Table-1>Eject - ⌘⇧1
djay>Table-2>Eject - ⌘⇧0
Thanks in advance for any help!!

A NodeList doesn't only contain 1 element. In your example it contains ALL <Data> elements inside the document.
NodeList nodes = document.getElementsByTagName("Data");
System.out.println(nodes.getLength() + " \"Data\"-elements found");
for(int i=0; i<nodes.getLength(); i++) {
Node node = nodes.item(i);
}

Are drives with the same name differentiated?

I'm running OSX 10.6.8 and three external drives on which data is stored (a main drive, A-Data, and two backups). A friend may decide to help me with a project and to do so will have to have the same setup. Naming the drives on the second system is of some concern to me, so I did some research.
The fellow at http://www.cnet.com/au/news/drives-in-os-x-appearing-with-1-appended-to-their-na mes/ states:
If by chance you mount two drives of the same name, because the system can't create two mount points with the same name it appends sequential numbers to new mount points as they are created, and therefore you will see the numbered drive names in the Finder.
Unless I misunderstand what he is talking about, I found that I can have two drives with the same name. I can have two drives named A-Data on my desktop. And therein lies my problem (maybe). The project involves Premiere and several of it's sister programs, all of which require external files (video, audio, stills) to be linked, not stored within the working file.
QUES 1
Are disks with the same name distinguishable by OSX or software?
QUES 2
Assume that
I am working on a project which is saved on A-Data (and all the project links are to files on that particular A-Data)
I then connect another disk with the same name (and with the same folder structure), and backup my files to it.
I then eject the first A-Data and open the project on the second A-Data.
Will the software say that it can't find the linked files (because they are on the ejected disk), or will the project open as normal?

Avoid having the same names if at all possible, especially if you use apps that 'link' to the media via the file path.
The file path is set by the order in which the disks mount, which can change across reboots.
To see what is going on by using Disk Utility…
Select the first volume, look at the mount point (a blue link at the bottom of the Window) …
/Volumes/A-Data
Now connect the second volume & select it, look at the mount point…
/Volumes/A-Data 1
Now reboot, power off the first disk, leave the second one on & power disk one back on when the OS has competed booting. They will show the same paths, but each disk is now the 'other' disk - this makes a big mess for Apps like Premiere.
The only way to make this work is to clone every file to be identical on both disks, and never use Premiere (or any app that links to media) when both disks are connected. Otherwise you risk linking to media files on 'A-Data' and 'A-Data 1'.
Premiere must have tools for sharing projects - look at them before using disk names in this way.
You could however clone 'disk 1' to 'disk 2' & then rename it on the second Mac (to make them identical to fix the paths for Premiere), just avoid bringing them to one Mac with the same disk names. It does make more headaches in future though, because your friend will add new media that you need to migrate back to your disk.

Multiple volumes with the same name

If I look at my /Volumes folder using Finder>Go>Go to Folder.. I see seven different volumes all starting with the same name:
MyName
MyName 1
MyName-1
MyName-2
MyName-3
MyName-4
MyName-5
(as well as my external drive and iMac HD)
MyName has a folder icon, and contains 1 folder called Backup which then has my 1Password.keychain in 7 different versions.
MyName 1 and MyName-1 are aliases and have icons for shared volumes. The only differences I can see are that in "MyName 1", the folders for Backup, Groups and Library are all displayed as aliases, whereas in "MyName-1" they are displayed as standard folders.
MyName-2 through MyName-5 all have folder icons and are empty.
I can understand that I could have a local and remote copy of my iDisk, hence the "MyName 1" and "MyName-1" volumes, but why all the others?
Should I delete any of MyName-2 through -5?
Is any of this slowing down iDisk syncing or searching?
Thanks in advance

I have the same problem
an external firewire drive "232 GB" is gaining an extra, sequentially numbered, mountpoint in /Volumes/ each time it is unplugged and re-plugged.
This is a bit of a pain as Xtorrent is downloading to a folder on this drive and so, whenever it is unplugged, I have to either;
restart all the downloads or,
before launching xtorrent, go into /volumes/ and delete the last mountpoint (so the system automatically adds the one Xtorrent is expecting)
just noticed you're in Sheffield too, maybe it's a local problem....
no idea what's causing it

Multiple lovs with the same name on the same module/form

I've noticed that in this case in a generated fmb LOVs get renamed so that first remains with the same name, next one gets 1 at the end, next one 2 and so on.
What I haven't found yet is the rule by which they are sorted, i.e. which one gets 1, which one 2, which one remains with the same name...
I've tried with the usage sequence of the LOVs but that seems to have no influence.
Anyone has any clues?

I have the same problem
an external firewire drive "232 GB" is gaining an extra, sequentially numbered, mountpoint in /Volumes/ each time it is unplugged and re-plugged.
This is a bit of a pain as Xtorrent is downloading to a folder on this drive and so, whenever it is unplugged, I have to either;
restart all the downloads or,
before launching xtorrent, go into /volumes/ and delete the last mountpoint (so the system automatically adds the one Xtorrent is expecting)
just noticed you're in Sheffield too, maybe it's a local problem....
no idea what's causing it

HT5767 My mail all of a sudden would not allow me to delete messages in my inbox saying, "couldn't be copied to "Messages" because an item with the same name already exists." Found it duplicates the message I wanted deleted in trash.

Still using the @mac.com mail address and up to date on everything, but have not gone to Maverick. All of a sudden Mail wouldn't let me delete. Said that title of email was already in trash. And sure enough it was. Clicking on the help button on the message gets Nothing.
The selected topic is currently unavailable.
The topic you were trying to view could not be found.
"couldn’t be copied to “Messages” because an item with the same name already exists."
Any ideas. My mail is not tied to gmail etc.. just all by it's lonesome.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Bug with workflow that creates a folder and sub folder with the same name.

Hi,
I've found a possible bug in SharePoint 2010 workflows. I only have access to SharePoint 2010 and SharePoint Designer 2010 over my companies intranet, afaik I don't have access to to logs or anything server side so sorry for the any missing information.
I had some problems with a workflow in one list that needed to create some folders and subfolders in a second list. The production version did a lot more so I setup a test area with 1 list and a workflow that only does the folder creation part and have managed
to consistently replicate this problem.
The test list has two columns, [title] and [sub folder title]
The workflow starts by getting the values for [title] and [sub folder title] into variables.
It then creates a folder in the same list with the same name as [title], and then creates a sub folder under this with the name from [sub folder title]
So the resulting structure would be:
Test List:-
List item with fields [title] and [sub folder title]
[folder: title]:-
[folder: sub folder title]
If both folder names are different (e.g Folder1 and Folder2) then it works perfectly fine, if both folder names are the same (regardless of character case, e.g. samefolderName and sameFolderName) then the workflow fails.
As part of the test i made the first action of the workflow to log the message "Workflow Started" to the history list. When the workflow fail there's nothing logged in the history list other than the error: "The workflow could not update the
item, possibly because one or more columns for the item require a different type of information."
Creating a sub folder with the same name as it's parent works fine manually but for some reason a workflow can't seem to do it in one action.
As there's no history list entries before the error it looks like the workflow is just failing to start but if i do something like add an if statement to check if [title] and [sub folder title] are the same, and only create the subfolder when they are not
then it runs fine doing what it's set to.
The function of the workflow in our office was for convenience so were just working without it. Just wanted to post to see if anyone else has come across this/could try to replicate or explain this and see if it's a SharePoint bug or something specific
to our setup.
thanks,
Martin

not sure about the specifics of your workflow, but if you're querying the list for the folders... keep in mind that a list lookup will only ever bring back ONE item... even if there are several items that meet the filter criteria... example: if i search
a list for an item assigned to "john doe", there may be 15 tasks that meet the criteria, and it'll only grab one... this is why SP Designer WARNS you when your list lookup may exhibit this behavior.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

After installing latest update Realplayer recording no longer works, I think Mozila is using a library file with the same name

After installing the latest update to Firefox onto Vista operating system the record part of real player no longer works, I think Mozila and Real are using a library file with the same name and the Mozila update is overwriting a Realplayer library file.

I was giong to say, "Help me, Adobe Joe Kenobi", but it looks like you're growing a beard waiting for an answer, too.
The same thing happened to me today. I trusted the "update" message since it was from Adobe, and apprently did so at my own peril. Now I get the "failed to load Core dll" message with a secondary reference to a memory address.
Just an observation, but what good are these forums when there are no answers? I see this problem as "Caused by Adobe Update", and would expect them to troublshoot and offer up a remedy. Since you've been waiting over two months with no response, I suppose it's time to trek off wasting more of my precious time to fix their problem. If I find the solution, I'll post it back to you.
May the Force be with you.
Mark

Applet with 2 methods with the same name in ie

Hi,
I have a problem with the Java 1.5 plugin for Internet Explorer .
When my Applet contains 2 methods with the same name but not the same return type, ie does not take the good return type.
Here is an exemple :
* Class TestApplet
package test.applet;
import java.applet.Applet;
public class TestApplet extends Applet {
     public void init() {
          System.out.println("init()");
     public void start() {
          System.out.println("start()");
     public String test(String s) {
          System.out.println("test(String) :" + s);
          return s;
     public boolean test(int i) {
          System.out.println("test(int) :" + i);
          return true;
}I have 2 methods test(), one returns a String and the other a boolean.
I use the following html code :
<html>
<head>
<script>
function test() {
     alert(document.DataAccess.test("hello"));
</script>
</head>
<body>
<applet WIDTH="500" HEIGHT="200" ID="DataAccess" NAME="DataAccess" CODE="test.applet.TestApplet">
</applet>
<div onclick="test()">test</div>
</body>
</html>
When I click on "test", the alert show "true" instead of "hello".
The problem only occurs with a JVM 1.5. It work fine with JVM 1.4.
Any idea ? Is it a bug ?
Thanks.

In your javascript method:
function test() {
alert(new String(document.DataAccess.test("hello")));
MSJVM and SUN jre use different conversion from javaScript objects to Java.
if you call from javaScript:
document.getElementById("myApplet").myMethod(22);
The method in MSJVM should look like this:
public whatever myMethod(Double d);
and SUN jre:
public whatever myMethod(Integer i);
The best thing to do is this:
public whatever myMethod(Object o);
               int col = 0;
               if (o.getClass().getName().toLowerCase().indexOf("integer") != -1) {
                    col = ((Integer) o).intValue();
               } else {
                    col = ((Double) o).intValue();
               }

JTree Nodes with the same name

What do I have to do to get the JTree to render nodes with the same name? These Nodes user objects are completely different object types and each has a unique hashcode.
+ Root Node
+-- node1 (this is a folder)
+-- node1 (this is a file)
The problem is I have n folders in my tree but if a parent folder contains a folder and a file with the same name then no other subfolders are displayed.
The nodes exist in memory because I enumerate the tree and display its contents in System.out.
Thanks in advance!
Matt

Thank you to everyone that responded. I solved the issue. It was a timing issue...here's my original method:
private void renderProductFolder(SubFolder sf){
try{
WTPart part = QueryHelper.service.findWTPart("number", sf.getNam());
WTTreeNode node = buildWTTreeNode(part);
super.getTreeModel().setRoot(node);
renderTree(node, sf); // This is the problem call
super.getSelectionModel().
setSelectionPath(new TreePath(node.getPath()));
super.expandPath(new TreePath(node.getPath()));
}catch(Exception ex){
ex.printStackTrace();
Here is the fix:
private void renderProductFolder(SubFolder sf){
try{
WTPart part = QueryHelper.service.findWTPart("number", sf.getNam());
WTTreeNode node = buildWTTreeNode(part);
renderTree(node, sf); // This was the problem call
super.getTreeModel().setRoot(node);
super.getSelectionModel().
setSelectionPath(new TreePath(node.getPath()));
super.expandPath(new TreePath(node.getPath()));
}catch(Exception ex){
ex.printStackTrace();
I was originally building the root node, then setting it as the root, then adding additional nodes to the root in the call to renderTree(). So the fix was to build the complete tree structure and then call setRoot(). Otherwise the tree doesn't automatically paint the nodes when they're added via node.add(nodeChild).
It was just a coincidence that I discovered this problem with nodes having the same name.
Thanks for all your great input!
Matt

How do I make Applescript to compress 2 filez with the same name?

Hello guys and thank you for reading this!
I don't know a lot about programming, but i believe applescript can save my life. What I need is.
Detecting 2 files with the same name, but differnt extension. (song 1.jpg, song 1.mp3)
Compressing those 2 files into a single .zip (In the end I would have song 1.jpg, song 1.mp3 and song 1.zip
And that's it! I know its pretty simple, and I've seen the "Create Archive" in automator, but I don't really know how to tell him which files to Compress.
Thanks again!

Hi,
Try this script :
set sourceFolder to choose folder
tell application "System Events"
      {name, name extension} of (files of sourceFolder whose name extension is not "zip")
      my compress2FilesSameName(the result, sourceFolder as string)
      repeat with i in (get folders of sourceFolder) --check in subfolders
            {name, name extension} of (files of i whose name extension is not "zip")
            my compress2FilesSameName(the result, path of i)
      end repeat
end tell
on compress2FilesSameName(tList, tFolder)
      set tnames to item 1 of tList
      set tExtensions to item 2 of tList
      set tc to count tnames
      set j to 1
      repeat while j < tc
            tell (item j of tExtensions) to if it is not missing value or it is not "" then
                  set n1 to (count) + 2
            else
                  set n1 to 1
            end if
            tell (item (j + 1) of tExtensions) to if it is not missing value or it is not "" then
                  set n2 to (count) + 2
            else
                  set n2 to 1
            end if
            set name1 to item j of tnames
            set name2 to item (j + 1) of tnames
            if (text 1 thru -n1 of name1) = (text 1 thru -n2 of name2) then -- same name
                  set tFile1 to quoted form of POSIX path of (tFolder & name1)
                  set tFile2 to quoted form of POSIX path of (tFolder & name2)
                  set zipFile to quoted form of POSIX path of (tFolder & (text 1 thru -n1 of name1) & ".zip")
                  do shell script "/usr/bin/zip -j " & zipFile & " " & tFile1 & " " & tFile2
                  set j to j + 2
            else
                  set j to j + 1
            end if
      end repeat
end compress2FilesSameName
if an archive already exists with the same name (in the parent folder of the files to compress) , the ZIP command overwrite this ".zip" file.
Example with "song 1.jpg", "song 1.mp3" and "song 1.zip" :
If "song 1.zip" doesn't exist, the ZIP command create the "song 1.zip" file.
If "song 1.zip" exist, the ZIP command overwrite the "song 1.zip" file (it will not create a new archive).

Create a dir if there exists a file with the same name

Hi..
I want to create a directory with file.mkdir(). But I recognize a problem when there is allready a File with the same name.
Is there any solution to handle a dir and a file with the same name?
eg: Dir "C:\Windows" and File "C:\Windows"
wami

This explains it... use "java Test2 asdsfd" for example. While this example doesn't show it,
if you try to create a dir with another slash on it c:\blah\ , it still can't be done.
import java.io.*;
public class Test2
public static void main (String args[]) throws Exception
     if (args.length < 1){
     System.out.println("Test2 [name]");
     System.out.println("creating bogus file " +args[0]);
     FileOutputStream fo = new FileOutputStream(args[0]);
     fo.write(55);
     fo.write(55);
     fo.write(55);
     fo.close();
     File x = new File(args[0]);
     if (x.mkdir()) System.out.println("made dir " + args[0]);
     else System.out.println("failed to make dir " + args[0]);
     System.out.println("deleting file " + args[0]);
     x.delete();
     if (x.mkdir()) System.out.println("made dir " + args[0]);
     else System.out.println("failed to make dir " + args[0] + " again !");
}

Vendor code with the same name - Check required

Hi experts,
We are using three account groups for creating vendor thru tcode XK01. A/C group 1000, 2000, 3000 & two company codes SCL , SGL.
We want to built some error msg control that if some body tries to create vendor with the same name again with in the same company code, purchase organisation, account group, system should throw a error message.
Currently warning msg is appearing in our system which is only based on the duplicate name but not considering porg, co. code, a/c group.
Please suggest. Suggestions / Solutions will be highly rewarded.
Regards,
( Rajneesh Gulati )

If You are Using Internal Number Assignments for Vendor Master then Set Messages F2144 - Vendor found with same address & F2272 - Vendor's with same VAT Reg numbers and your Problem will solve.
Else Try User Exit EXIT_SAPMF02K_001

ReCreate Business System (ABAP AS) with the same name ? is this safe ?

Similar Messages

Maybe you are looking for