Recreate file replication eventlog view

I am having
an issue and have no idea how it happened. We took over a domain and in the event viewer, there is no log area for File Replication Service. I understand that DFSRS has kind of replaced this service and replication is happening over the 4 DC's with no issues
but I am wondering if I get the service started for peace of mind. Every DC does not have this application and service logs, event viewer.
What I have tried so far:
Went into the system event log I see this error: A timeout was reached (30000 milliseconds) while waiting for the File Replication service to connect.<o:p></o:p>
The service has been disabled on every server. I tried to enable it and above is the error I received when I tried to start it in the event viewer. I then proceeded to try to look in the registry
and I noticed there were no entries HKLM/system/CurrentControlSet/Services/eventlog for the File Replication Service. I exported that File Replication Service and imported it into the 4 servers. I closed and reopened computer management and the file replication
service event viewer showed up. It also was logging this Information log: The File Replication Service is starting. And then throwing this error: This domain controller has migrated to using the DFS Replication service to replicate the SYSVOL share. Use of
the File Replication Service for replication of non-SYSVOL content sets has been deprecated and therefore, the service has been stopped. The DFS Replication service is recommended for replication of folders, the SYSVOL share on domain controllers and DFS link
targets. <o:p></o:p>
My next step was to try to register the dll files there were being used in the registry: %SystemRoot%\system32\els.dll (this one registered properly) C:\Windows\system32\ntfrsres.dll this one
failed. I tried to replace the dll file but it said I need permissions from the TrustedInstaller to make changes to this file which is where I stopped. <o:p></o:p>
Any ideas on what I should try next?
Craig Becker

Hi Craig,
So it is actually an AD related issue.
On Windows Server with FRS replication, to rebuild we can perform a D2 (nonauthoritative mode restore) to replicate from another DC.
Backing Up and Restoring an FRS-Replicated SYSVOL Folder
http://msdn.microsoft.com/en-us/library/windows/desktop/cc507518(v=vs.85).aspx
However as now your DCs are replicating with DFSR - is this your problem?
If so, please refer to this article to do a non-authoritative sync instead:
How to force an authoritative and non-authoritative synchronization for DFSR-replicated SYSVOL (like "D4/D2" for FRS)
http://support.microsoft.com/kb/2218556
If you have any feedback on our support, please send to [email protected]

Similar Messages

The File Replication Service cannot replicate d:\sysvol\domain

i am getting a error in my evetn viewer that says...
The File Replication Service cannot replicate d:\sysvol\domain because the pathname of the customer designated staging directory:
d:\sysvol\staging\domain
is not the fully qualified pathname of an existing, accessible local directory

Is d:\sysvol\staging\domain a path to an existing accessible directory on that system? You might consider running "net share" from a command line to see where sysvol and netlogon are pointing on that particular system to get the ball rolling.

How do I move aiff files from the viewer to the timeline-it is not working when I try to drag and click or clicking on overwrite or insert in Final Cut Pro 7. Thanks

How do I move aiff files from the viewer to the timeline-it is not working when I click and drag or when I try to move the files to the overwrite or insert buttons-Thanks.

hi
You cannot move audio from the viewer
Mark your in and out points then in the browser grab hold of the audio tracks icon and drag that to the time line
PJ

Can't see .cfm files in Design view

Can't see .cfm files in Design view in Dreamweaver CC.

Hi pkregel,
Do these files open as intended in Dreamweaver CS6? I am not a CF expert but I am guessing that if you are able to open the files, then you should be able to see them in both the views. Can you post a screenshot as well?
Thanks,
Preran

The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.

Hi!
I recently took over management of a Windows 2003 domain that had only one domain controller. I was building a second DC for redundancy and discovered that the SYSVOL share on the original DC is in "JRNL_WRAP_ERROR" after the SYSVOL and NETLOGON
share would not create on the new DC. This error goes back as far as the log goes back so I don't know how long it has been in this state.
The message in the event log states to enable "Enable Journal Wrap Automatic Restore" but I found a KB article that says to use the BurFlags key instead. http://support.microsoft.com/kb/290762
Should I run an authoritative restore since I don't have another domain controller with a good SYSVOL?
The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.
Replica set name is    : "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)"
Replica root path is   : "c:\windows\sysvol\domain"
Replica root volume is : "\\.\C:"
A Replica set hits JRNL_WRAP_ERROR when the record that it is trying to read from the NTFS USN journal is not found. This can occur because of one of the following reasons.
[1] Volume "\\.\C:" has been formatted.
[2] The NTFS USN journal on volume "\\.\C:" has been deleted.
[3] The NTFS USN journal on volume "\\.\C:" has been truncated. Chkdsk can truncate the journal if it finds corrupt entries at the end of the journal.
[4] File Replication Service was not running on this computer for a long time.
[5] File Replication Service could not keep up with the rate of Disk IO activity on "\\.\C:".
Setting the "Enable Journal Wrap Automatic Restore" registry parameter to 1 will cause the following recovery steps to be taken to automatically recover from this error state.
[1] At the first poll, which will occur in 5 minutes, this computer will be deleted from the replica set. If you do not want to wait 5 minutes, then run "net stop ntfrs" followed by "net start ntfrs" to restart the File Replication
Service.
[2] At the poll following the deletion this computer will be re-added to the replica set. The re-addition will trigger a full tree sync for the replica set.
WARNING: During the recovery process data in the replica tree may be unavailable. You should reset the registry parameter described above to 0 to prevent automatic recovery from making the data unexpectedly unavailable if this error condition occurs again.
To change this registry parameter, run regedit.
Click on Start, Run and type regedit.
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
   "System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
   "Enable Journal Wrap Automatic Restore"
and update the value.
If the value name is not present you may add it with the New->DWORD Value function under the Edit Menu item. Type the value name exactly as shown above.

> The message in the event log states to enable "Enable Journal Wrap
> Automatic Restore" but I found a KB article that says to use the
> BurFlags key instead.
http://support.microsoft.com/kb/290762
>
> Should I run an authoritative restore since I don't have another domain
> controller with a good SYSVOL?
The automatic restore process AFAIK will initiate a D2 restore. And if
there's no other DC, sysvol might be gone.
I really would prefer to have control - this means I would do a D4.
Absolutely I would :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

TXT Files in Design View

I use a lot of TXT files as INCLUDE files in various pages.
When I used Dreamweaver 4 I had no problem editing a TXT file just
like any HTML file and using DesignView. When I get going with
Dreamweaver MX2004 I figured out how to do it. But I had to
reinstall DW MX2004 and cannot get it to look at a TXT file in
anything but CodeView - or call NotePad to edit it.
I have already removed .txt from "OPEN IN CODE VIEW". I have
tried going to MMDocumentTypes.xml and setting the Text type to
HTML - which is what I thought I had used before. That didn't work.
I've tried various combination of editing the Extensions.txt file,
too - with and without the MMDocumentTypes.xml file.
I know there is a way to do it - but cannot find the
way!!

I finally figured out how to work with TXT files in Design
View...
1. Go into MMDocumentTypes.xml and set the Text type to HTML
2. in PREFERENCES Remove the .TXT type from OPEN IN CODEVIEW
3. in PREFERENCES add the EXTENSION .txt and add Dreamweaver
as the EDITOR
The HTML in a TXT file shows up and is editable just as in an
HTML document

How to load external storage html file in web view

hi all,
how to load external storage html file in web view, please help me
" ms-appdata://local/index.html" not working
veerasuthan veerakesan

It need be read as string. Then load the string by Webview.NavigateToString.
Sample as below
string htmlstring = string.Empty;
try
var htmlfile = await Windows.Storage.ApplicationData.Current.LocalFolder.OpenStreamForReadAsync("a.html");
using (System.IO.StreamReader streamReader = new System.IO.StreamReader(htmlfile))
htmlstring = streamReader.ReadToEnd();
webview.NavigateToString(htmlstring);
catch(Exception ex)
Debug.WriteLine(ex.ToString());
在現實生活中，你和誰在一起的確很重要，甚至能改變你的成長軌跡，決定你的人生成敗。和什麼樣的人在一起，就會有什麼樣的人生。和勤奮的人在一起，你不會懶惰；和積極的人在一起，你不會消沈；與智者同行，你會不同凡響；與高人為伍，你能登上巔峰。

I just upgraded from PS cs4 to cs6. All of my files open up viewing at .0625% - which is very irrita

I just upgraded from PS cs4 to cs6. All of my files open up viewing at .0625% - which is very irritating. How can I change this?

Are you on a Mac or PC? If the former, do you have the Application Frame visible?
Could you post a screenshot of how Photoshop CS6 looks when you first open an image and have it show at the tiny size?
Chances are you've made the main Photoshop window small, which is causing it to try to fit a newly opened image in too small a space.
I'm going to make a wild guess that you're on a Mac, and have dragged the bottom edge of the Photoshop window up instead of turning off the Application Frame, so as to be able to see your desktop.
-Noel

Linked WMV files impossible to view

Something strange happened.
I'm creating some new pages and I linked a wmv file to a text.
I took a preview and clicked the link and the wmv file could be viewed by means of Nero Show time.
Second tentative the progam says Nero Show Time needs an update.
To continue I took Windows Media Player.
But when I try the same link now the browser says that the page is not existing = so I cannot download and play the wmv files.
How to solve this? It worked in the beginning but now it simply is not possible anymore.
Note : I can't play any wmv file at all. I tried a wmv file that is on my old website and even that one I can't download and play. Has this something to do with my media player then?
I'm totally confused now
Martine

Dear Friends,
No need anymore for your assistance. I got it all right again. For one reason or another all options for internet and playing files was mixed up.
Could be after a Vista update or by using Windows media player for the first time.
I close this topic
Martine

Is there a size limit for the txt files to be viewed in the ipod ?

when I pass a text file (.txt) in the notes folder, then I try to see it on my ipod nano, I can see just a part of it, the beginning. Is there a size limit for the .txt files to be viewed in the ipod nano? How to increase it?

4kByte file size, 1000 notes max.

Event ID - 13568 The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.

We had a major storm over the weekend which caused an unexpected shutdown.
I am having an issue with one of my domain controller with Event ID 13568
The domain controller which is running Windows Server 2012 was added successfully just a couple of days ago.
I do not have a full backup of the server yet.
It only has a GC role on it.
What are the things I should look out for before I attempt to Enable Journal Wrap Automatic Restore and set it to 1?
Would it be safer to just demote the server and start from scratch?
Thank you all for reading!
Mladen
The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.
Replica set name is    : "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)"
Replica root path is   : "c:\windows\sysvol\domain"
Replica root volume is : "\\.\C:"
A Replica set hits JRNL_WRAP_ERROR when the record that it is trying to read from the NTFS USN journal is not found. This can occur because of one of the following reasons.
[1] Volume "\\.\C:" has been formatted.
[2] The NTFS USN journal on volume "\\.\C:" has been deleted.
[3] The NTFS USN journal on volume "\\.\C:" has been truncated. Chkdsk can truncate the journal if it finds corrupt entries at the end of the journal.
[4] File Replication Service was not running on this computer for a long time.
[5] File Replication Service could not keep up with the rate of Disk IO activity on "\\.\C:".
Setting the "Enable Journal Wrap Automatic Restore" registry parameter to 1 will cause the following recovery steps to be taken to automatically recover from this
error state.
[1] At the first poll, which will occur in 5 minutes, this computer will be deleted from the replica set. If you do not want to wait 5 minutes, then run "net stop ntfrs"
followed by "net start ntfrs" to restart the File Replication Service.
[2] At the poll following the deletion this computer will be re-added to the replica set. The re-addition will trigger a full tree sync for the replica set.
WARNING: During the recovery process data in the replica tree may be unavailable. You should reset the registry parameter described above to 0 to prevent automatic recovery from
making the data unexpectedly unavailable if this error condition occurs again.
To change this registry parameter, run regedit.
Click on Start, Run and type regedit.
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
   "System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
   "Enable Journal Wrap Automatic Restore"
and update the value.
If the value name is not present you may add it with the New->DWORD Value function under the Edit Menu item. Type the value name exactly as shown above.

I set Enable Journal Wrap Automatic Restore to 1 and it was
successful.
I will monitor it to make sure it does not occur again.
Thanks everyone on your replies
Mladen

The PDF file and slideshow view corrupted using iPhoto. Macbook air only get corrupted slideshow and Mac Mini both slideshow and PDF file is corrupted.

The PDF file and slideshow view corrupted using iPhoto. Macbook air only get corrupted slideshow and Mac Mini both slideshow and PDF file is corrupted.

Saving as a PDF file for some users have been a problem. If you boot into Safe Mode and run iPhoto you can create undamaged PDF files. We don't know why the problem but this is a workaround.
This problem prevents many from ordering books, calendars and cards since iPhoto creates PDF file of them for uploading and printing. Booting into Safe Mode lets them successfully order those items.

How can I view .inc files in split view on DW

I'm trying to view my INC files in split view using DW CC 2014.1.
I've managed this on older versions of DW by changing the extensions.txt and MMDocumentTypes.xml file.
However, that isn't working for me now.
Am I missing something for DW 2014.1?
Thanks,
Liz

I've managed this on older versions of DW by changing the extensions.txt and MMDocumentTypes.xml file.
Works for me.
Are you sure that you targeted the files in the correct directory as in Dreamweaver CC 2014.1?

No Folio File field in Viewer Builder?

For some reason I do not have a field to associate a folio file to a viewer in the Viewer Builder. This greatly impairs the user experience.
I'm using Indesign 5.5, have downloaded the most recent updates from the DPS site and have cleared the cache of my browser. I've also released an app in pre-release but this is the first one in the new interface.
The documentation in the DPS help section references the Folio File field in the Basic Settings panel of Viewer Builder but I've navigated through the Viewer Builder and see no place to actually designate the folio to be built into the viewer. What am I missing?
I can see where folios published to the account will automatically populate the viewer and from a developer standpoint maybe there isn't a need to associate a specific file to build and release the viewer itself, but the app for this viewer (that was successfully built in the DPS VB with confirmation as completed) was rejected by Apple because from their point of view it's an app with no content (no actual folio files for an end user to look at.)
Thanks!

Thanks for the response Bob.
Yes, multi-folio viewer is what I need for a series of digital magazines. Sorry, in pre-release the multi-folio viewer was built and pointed to a folio file as with a single viewer. The new release is fantastic, I'm not nostalgic. Just trying to troubleshoot.
After your post I assumed then that the viewer must automatically read what's been published and auto-populate the viewer. The problem was that I wasn't seeing the folio in the viewer on my ipad (loaded with iPhone Config Utility) but was seeing it through the generic Adobe Viewer. I checked certificates, settings, etc. in the viewer and everything checked out fine. I then went through publishing options.
What I found was that when the folio is set to free, it is viewable in the custom viewer we've created. When it is set to retail (we are planning on selling this issue) it is not. Has anyone else experienced this? Have I configured soemthing wrong? I re-checked documentation and don't see any additional settings needed for retail release. Is the viewer expecting some additional info from the App Store to process the display icon of the folio for purchase?

Cant get inc files into design view

Hi Group,
in spite of following step by step the manual in switching dw
to show inc files in design view I cannot make it happen.
Use dw mx 2004 (english) and win xp sp2 (german)
Something goes wrong don't know what it is?
Any hint is appreaciated
rgds
rasterpit

AND no links to external CSS files, or embedded CSS rules,
either.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
": Nadia : ** ACE - Adobe Community Expert **"
<[email protected]> wrote in message
news:eqv4nl$b3q$[email protected]..
> "rasterpit" <[email protected]> wrote
in message
> news:eqv4hr$au4$[email protected]..
>> Alan,
>> no you are right the inc files do contain head and
body tags.
>> does this mean I have to change the code from all
these inc files?
>> Any other trick to geht them in design view like in
dw4?
>>
>> if so what would be the minimum header footer tag
for the inc files? just
>> body
>> or what?
>
>
>
> No body, no head tags allowed :-)
>
>
> --
> Nadia
> Adobe® Community Expert : Dreamweaver
> ----------------------------------------
> CSS Templates |Tutorials |SEO Articles
>
http://www.DreamweaverResources.com
> ~ Customisation Service Available ~
>
http://www.csstemplates.com.au
> ----------------------------------------
> CSS Tutorials for Dreamweaver
>
http://www.adobe.com/devnet/dreamweaver/css.html
>

Recreate file replication eventlog view

Similar Messages

Maybe you are looking for