Recruitment Faxing & e-mailing only possible for standard text in SAPscript

Hi,
I am using the old recruitment module PA-RC ion ECC6 and I am trying to send an email to an applicant. When I try and do this I get message "Faxing and e-mailing only possible for standard text in SAPscript". In feature WPROC I am set up to use RTF. Is there no way to send RTF emails? Do I need to create SapScripts for anything that I may possibly want to email?
Thanks
Tom

Apparently only able to carry this out in SAPScript

Similar Messages

  • "Posting with reference to pur. order only possible for integrated whse"

    When I try posting GR with mvmt type 101 wrt PO  I am receiving the error “Posting with reference to pur. order only possible for integrated whse”
    The scenario is  storage lcation is maintained  with the external warehouse management .
    Is there anything i need to maintain warehouse as decentralised one or should i need to maintain any moment types or is there anything else i should maintain in the customisation.
    Kindly guide me regarding this as I am new to WM ,Thanks in advance.

    Hi ,
    In my case i have not maintained as decentralised one.
    also the thing is  there is no warehouse house  data managed over here .the requirement is when connected to extended warehouse  the system has to create inspection lot after the GR has done ,
    whereas in normal scenario everything is normal,
    can you please suggest what should be done in this case.
    Also if possible can you please tell me what from the scratch so that it will be helpful to come through .

  • Error message 'Display only possible for print documents'

    Hi All,
    This issue is with the transaction code ME21N. When the user clicks on PRINT PREVIEW  it gives an error of 'Display only possible for print documents'. When the user clicks the MESSAGES tab and then COMMUNICATION METHOD tab it gives an error 'No communication data has been defined for transmission medium 6'. The vendor is not getting the order. Does anyone has any idea of what these error messages mean and where should I look further?
    Thank you,
    Regards,
    Shanu

    Hi
    this seems tobe relates to print program "" ask your ABABer what program he has written to send the PO to vendor your problam willbe solved.
    the moment you give the print it will ask the printer by  default LP01 then print immediately check you need to do that.then beground print program and partner you need check. whether this out type you have assigned to this partner or not (vendor).  check complecte condition technic.diffnettly it will works.
    i hope you have understood
    thanks &Regards

  • How to get F4 help for Standard Text Key of a operation based on Order type

    Hi Experts,
      How to get F4 help for Standard Text Key (STK) of a operation based on Order type entered in selection screen. The F4 help should give the STK of related order type. At the same time the F4 help for Task Types based on Notification type. How to acheive the above two. Please provide the table names or any search help name if exists or Function modules...
    Thanks in Advance.
    Regads,
    Bujji

    Hi Guys,
       Any help on this...
    Regards,
    Bujji
    Edited by: Bujji on Dec 22, 2008 12:42 PM
    Edited by: Bujji on Jan 5, 2009 2:00 PM

  • How to create transport request for standard text created using SO10.

    Hi,
    How to create transport request for standard text created using SO10?
    Regards
    Ramakrishna L

    Hi,
    For the Standard text created in SO10,
    please go to transaction SE78 -> FORM GRAPHICS->STORED AS TEXT->STANDARD TEXTS->
    Double click on ADRS or ST or what ever your type of text->
    Enter your standard text name
    Click on transport button->SHIFT+f6-> It will ask you for a transport request.
    Best regards,
    Siva

  • How to create REQUEST NUMBER for STANDARD TEXT (SO10)

    how to create REQUEST NUMBER for STANDARD TEXT ( t-cODE SO10)

    you can do this using program RSTXTRAN .
    Text key - object
    Text key - name
    Text key - ID
    Text key - language, then it will store under one transport that can be moved to other system.
    check out the following link.
    http://help.sap.com/saphelp_47x200/helpdata/en/f4/b4a1ed453611d189710000e8322d00/frameset.htm

  • Is it possible for sms text messages to be forwarded from one iPhone to another

    Hi I'm looking for a bit of help please? Is it possible for sms text messages to be forwarded from one iPhone to another without the use of such app as mysms or google voice as neither of these seem to work. Apple sugested that my network provider can usually assist in such maters with a few simple setting there end. Does anyone have previous experience in these matters. Thanks Matt.

    Do you mean forward them automatically?
    As you can manually forward any SMS or iMessage to any number you want directly from the iOS Messages app.

  • How to define & read Standard Text in SAPScript? Urgent Please

    Hi Experts,
    How to define & read Standard Text in SAPScript? Urgent Please..
    Thanks in advance
    good answer will points gud marks.
    sekhar

    Hi
    U can't define a standard text in a SAPScript, you call call it only by statament INCLUDE
    /: INCLUDE <ST TEXT NAME> OBJECT TEXT ID ST LANGUAGE <LANGUAGE>
    U can define it by trx SO10.
    If you need to know the text without to print it, you need to use a routine where u can use the fm READ_TEXT in order to find out the text.
    Max
    Message was edited by:
            max bianchi

  • PDF convertion for standard text

    Hi all,
    Currently i am using this function module "SX_OBJECT_CONVERT_OTF_PDF",
    working fine for script out puts.
    but i want to convert the standard text also as a pdf file . we are using 4.0 version.
    I am reading the standard text through READ_TEXT.
    Please do needful.
    Regards,
    Giridhar P

    Hi Ravi,
    after reading the Standard test the file format is : 
    li_cnt_txt like solisti1   occurs 0 with header line.
    But the OTF file is like  ITCOO this structure which is having only 2 fields.
    please suggest me how i can go ahead
    Thank you.
    Regards,
    Giridhar

  • Language change for standard text

    How to change the language of standard text.
    ex; from 'EN' to 'CS'

    Hi,
    Refer note 3355 in OSS for a complete explanation. The SAPscript objects that should be transported must be written in a
         transport request.
         The entries are as follows:
         R3TR FORM NAME (NAME = Name of the layout set)
         R3TR STYL NAME (NAME = Name of the style)
         R3TR TEXT OBJECT,NAME,ID,L
         (OBJECT = Text object, NAME = Text name, ID = Text ID, L = Text language)
         If you want to transport a number of texts, you can use report RSTXTRAN to insert the individual text keys into a
         correction.
         The transport request must be entered and released via the transport system.
    Reward points if helpful
    Regards.
    Srikanta Gope

  • Smart forms. How to setup logic for standard text usage.

    Hi All!
    Could you advise please is there a way, except abap programming, to setup in smart forms that different standard texts values (tcode so10) to be used based on different selected parameters (e.g. customers, vendors etc... ).
    e.g.
    For picking list smart form:
    for customer A- standard text A to be used.
    for customer B- standard text B....
    Thanks,
    Best Regards,
    Andrey
    Edited by: Andrey Kruglov on Mar 16, 2009 1:30 PM
    Edited by: Andrey Kruglov on Mar 16, 2009 1:30 PM

    HI,
    Refer this thread:
    Re: how to display symbols in smartforms
    There is a standard smartform for invoice.
    LB_BIL_INVOICE.
    Refer this thread:
    Re: Can anybody plz give me Smartforms print prog for Invoice/PackList
    Regards,
    Gayathri
    Message was edited by: Gayathri Hariharan

  • Transposrt request for standard text

    Hi,
    I have made changes to a standard text in SO10. It didnt ask for any transport request. IN se10 i created a workbench request. But the task is for this request is unclassified. How would i change it to Development/correction.
    Please let me know.
    Ster

    Hi,
    Steps..
    Create a work bench CR in the transaction SE09..
    Modify the task to Development correction / Repair..
    Go to the program RSTXTRAN..
    In the name of correction give the task number (Not the CR number)
    Give the Text Key..Your standard text name..
    Press F8...
    Press select all..
    Then Press enter..
    Then press the button "Trsfr texts to corr".
    Now the standard texts will be moved to a CR..
    Then release the CR and move it to QA..
    If you want to move it to another client..
    Use the transaction SCC1.
    Thanks,
    Naren

  • Transport req. generation for standard text

    Hi,
    I have done changes in standard text in trans. SO10 and could anyone let me know like how to generate transport req. for these changes for moving the same to Quality as i didnt get any transport req. generaton while i was trying to save my changes.
    Please advise.
    Thanks
    Naga

    HI,
    Don't provide any value to this field  'Name of correction '
    Name of correction  - blank
    Text key - object    -  TEXT
    Text key - name    - <Object  name created in SO10'
    Text key - ID         - 'ST'
    Text key - language - 'EN'
    Press F8 now you can see the you Text Object
    - select your text object and press enter.
    - now you can see the button in application toolbar 'Trsfr text to corr' press this button
    - you get the pop up window for the TR.

  • Doubt in creating the transport request for "STANDARD TEXT""

    HI ALL,
    i used the standard text in scripts but i am getting the problem while creating the transport request for that,
    i am not able to create the transport request for that,if anybody knows plzlet me know,
    this is very urgent,
    thanks and regards,
    saikrishna.

    HI SURESH ,
    THANKS FOR UR IMMEDIATE REPLY ,
    i executed that report in that i have given
    Name of Correction : ZREPST
    Textkey-object:
    Text key name:
    Text key - ID: ST
    Text key - language :EN
    Here Textkey-object,Text key name
    wat i have to ,give after that ,can i execute that ,
    will it create the request.
    plz let me know,now ur answer is very valueble ,because ,now i have to release everything,
    plz let me know immediately,
    thanks and regards,
    saikrishna.

  • Formatting for Standard Texts  not Applying

    Hi ,
    Now Ia m working on BTE's . In BTE function module I am  writing some text and saving it By SAVE_TEXT. In that Iam possing all the variables Including Style Name.And I am using this standard text as a body of the email.In that email Body the Formating options are not appying.
    Can anyone throw some inputs on this.
    Regards,
    Eswar

    thanks for you response,I am sending plain text.I am facing formatting issuse .How to do formating for body of email .

Maybe you are looking for

  • Time in APEX

    I want to add two fields. "Start Time" and "Finish Time" and then have another field which displays the actual time by subtracting the finish time from the start time. I can't find a format for time, there is a date which includes the time but not ti

  • Costing Run If RM has zero value

    Dear Friends, My client is going to get Raw material from parent compnay on free of cost. Now that mateial has 0 price.  This material is the part of production of finished good. Now If I run cost estimate or costing run then system is giving error m

  • Mail putting another person's name on my email address

    I manage four email addresses through Apple Mail. Today, inexplicably, my outgoing mail is being sent with a name other than my own. As you can see in the screen shot below, my name is Anne Leader yet Mail is sending as Mark Rosen even though his nam

  • E-mail by using labVeiw

    Hi everybody I am working on a school project. I'm going to send an e-mail by using labView. Is it possible to get a step by step information. Is it possible to convert the e-mail into a SMS? In case how? Mona

  • Calendar & contacts won't sync

    I have a centro and have my personal mail with hotmail.  I tried to also have my work email through outlook downloaded as well.  After messing around with the outlook sync I was able to sync to outlook, but only my calendar and my contacts, no email