Recruitment Module - requirement analysis of client's business processes

Dear Friends,
Greetings to All,
My client informed me to prepare a questionnaire on what all the information is required from the HR department relating to Recruitment activity to configure the Recruitment module in SAP.
I want to know what all the areas to be considered in preparing this document such as, Number Ranges, Recruitment media, Recruitment instruments, applicant structure and so on.....
Can any expert help me in this regard as what all the areas I have to consider in preparing this questionnaire document. I am working on ECC 6.0.
Appreciate your responses.......
P. Sai Narayana
SAP Functional Consultant

Hi Manoj,
Thank you so much for your response.......
At present my objective is to provide the Client a Questionnaire......which should cover all the information I require for the  Recruitment module - Business process of their company which is called as a Q&A database.....which we provide the client before preparing Business Blue print to study their business processes.......
The weblink which you have provided me is so helpful for e-Recruitment.........But our client is interested in Recruitment not e-Recruitment....
Can you please send me any information on this regarding to my mail ID.....[email protected], if you have.......
Thank you once again.......
Sai

Similar Messages

  • Business Process Analysis and Design

    hellow fellows
    Please can u explain to me briefly what's involved in Business Process Analysis & Design
    Thanks
    Rasham

    Hello Rasham,
    Business process analysis and design is a part of implementation / upgrade project. As name suggests it will analys client's business process to make the standard process across the group of company and make it most optimized to get maximum ERP support.
    Some time it will cover under blueprint phase and some time it can be carried out as a saperate process before actual start of implementation.
    The following link will give you detailed information about all phases of the project including Business Process Analysis and Design.
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/bpx-implement">Business Process Cycle: Implement Phase</a>
    Hope this helps.
    Regards,
    Arif Mansuri

  • Business Process Engine is showing Red Led in RWB

    Hello to All,       I installed PI7.1 and after client copy - Business Process Engine is showing Red Led in RWB. 
    When I click on BPE, the message at bottom of screen (in Yellow Status) indicates " Schedule background job for clearing report".  Please let me know if any one has the solution with details.
    I gone thru the link in SDN, but no resolution yet.
    Re: Business Process Engine is  showing Red Led in RWB
    thanks, Srini

    Hi Mark,  All the nodes are green under "Maintain Runtime Environment" and "Maintain Definition Environment".
    In RWB, component monitoring --> Display -- Business process engine is RED with message as
    "Schedule background job for clearing report" in Yellow.
    I looked under batch jobs "SWWCLEAR" and it is already ran successfully.
    Please let me know how can i make BPE green.
    thanks, Srini
    Edited by: Srinivas Chatrati on Apr 20, 2009 11:51 PM

  • Check Business Processes In/Out

    Hi Experts
    I want to know how to Check Business Processes In/Out.
    REgards
    Nitin

    Hi Nitin,
    You can only check documents in and out using the button in the documentation tabs.
    However, the closest answer to your requirement is to put the business process folder in and out of scope.
    Use SOLAR01 transaction and ensure your project structure is not locked. In change mode you can use the tick box against the folder nodes to put the process in and out of scope.
    If it is ticked, it will be visible in SOLAR02, if not then it won't be available and you can modify it.
    Regards,
    -Rohan

  • Module-specific checklist for business process requirements mapping?

    Hi,
    I am looking for some ASAP tools to support the business process requirements mapping phase of an implementation. The best would be to have a checklist, a sheet of questions to ask during the meetings so that each requirements are considered when creating the business processes in solution manager.
    Anyone can recommend me such material?
    Thanks in advance,
    regards,
    Ádá

    Dear,
    Check: Pre Implementation Questions
    Implementation questionnaire
    http://it.toolbox.com/blogs/dhruvs-blog/sap-implementation-blueprints-32286
    Regards,
    Syed Hussain.

  • What are the pre requisites for E-Recruitment module?

    Hi all,
    What are the pre requisites for implementing E-Recruitment module ?
    Does it require Hr module or as stand alone it can work?
    Regards.
    Rajendra

    Thanks Aniket
    Will the following configuration work as e-recruitment stand alone mode.
    WAS with ABAP stack + E-Recruting 6.0 sp + Java stack + Portal + ESS MSS Business package ( for e recruiting).
    Regards
    Rajendra

  • Generating Offer Letter & Data Transfer in Recruitment Module

    Dear Gurus,
    1) We are implementing Recruitment module and i am quite new to it. Could any one of you suggest what are the sequence of steps required to maintain to make sure that a Standard offer letter is generated and how to mail it to the applicant while you perform Offer Applicant Contract activity. Kindly suggest how to move further to fulfill this requirement.
    Kindly note this is pure Recruitment module and  e recruitment is totally out of scope.
    2) How do you transfer applicant data to Personnel Adminstration module when the Applicant action Prepare for Hiring is run.
    Kindly suggest the sequence of steps to be followed to make sure the data transfer happens from recruitment to personnel adminstration.
    Kindly also let me know what are the mandatory switches that have to be activiated in T77S0 table to set up an integration between PA & RC.
    3)When you hire a external applicant whose data is already there in PB10 and when you hire him for suitable vacancy and do the data transfer to PA. The next time when i try searching in the applicant pool will the Applicant group change from External applicant to internal applicant in case of hired applicant. If yes how to go about it.
    Kindly throw some light on this. Please note we would like to go about the standard functionalities of SAP Recruitment module.
    If there is any challenge in fulfilling the above requirements, kindly point out the same so i can address the same to my client...
    Regards,
    Kiran

    Hi Ravi,
    You can do the initial data entry of the applicant through Tcode PB40 or PB10.  Once you have maintained the data, then you can do the applicant actions like given below through Tcode PB40.
    Enter additional data
    Reject applicant
    Put applicant on hold
    Process applicant
    Offer applicant contract
    Applicant rejects offer
    Change of org. assignment
    Further application
    Invite applicant.
    It is not compulsory to do all these actions, but these actions are useful to keep a track of applicants.
    Then you have to do applicant action prepare for hiring through PB40.  After doing prepare for hiring action you can transfer the applicant data to Personnel administration through Tcode PBA7.  Once the data is transferred personnel number is generated for applicant.  Then you have to complete the activities throug Tcode PBA8.
    Few tables for configuration of recruitment :
    T750D - for creating media for recruitment
    V_T750C - Recruitment instruments
    T750K - Applicant group
    V_T750F - Applicant range
    V_T751E - Applicant action type
    V_T588D - Infogroup for Applicant action
    Shrikant

  • Recruitment module ---interview call letter through email

    Hi Gurus
    My client is implementing Recruitment module ( Not  E- Recruitment module), they asked for is there any why to send interview call letter to the candidateu2019s personal email ID through SAP.  Is it required to activate any BAdi.
    Is this a customized scenario or  a standard settings?
    Please advice.
    Thank you,
    Srinvias

    yes there is standard apllication for getting the mail activated viz applicant activity types/ status......
    below is the part which has to be customizied in order to get the mail activated..... you choose feature PACTV for assigning the aplicant activity types to the status of the application.... based on which automatically the mail can be triggred........and feature MAILS define the activiyt type and the std text which you want to activate.... ex Below the std text used is MAIL-APP-INTERVIEW which will be called if activity is appointment for interview..... meaning of variuos variable can be found in the forum.....
    APACT Applicant activity type
    005 Appointment for interview
    IDTXT MAIL-APP-INTERVIEW
    RECV1
    RECV2 X
    RECV3 X
    SUBTY 0001
    OUTBX X
    After this you have to take care of the standard text in SO10 and here you will need a abaper to put the variable name etc which you would require... to place....
    if any further queries ...let me know..
    regds
    SS

  • Business process in sd module starts from pre sales activities & ends in --

    business process in sd module starts from pre sales activities & ends in billing or payment collection....... pls tell the answer....

    Hello,
    It depends upon the business process of the client. some time it will be like
    Inquiry --> Quotation --> Sales order --> Delivery --> Goods Issue --> Invoice --> Payment.
    But in some of the cases enquiry may not be there in the process, and even some cases quotation too and these both are not madatory.
    In SD point of view we are only bothered upto invoice, but the process end once we receive the payment.
    Prase

  • Documentation Help on E-Recruitment module implementation

    Hi Experts,
    I need Documentation related to implementation of E-recruitment Module in EP and also its features and benefits.
    Help needed urgently.
    Thanks & Regards,
    Shailesh Nagar

    It depends upon the Business packages you are using, E-recruitment version and the application modes (webdynpro and BSP's).
    If you are using mySAP ERP 2005 Business Package version 1.0, check this [documentation|http://help.sap.com/saphelp_erp2005/helpdata/en/31/3a1665fe7741d5b6501cd505a6bd82/frameset.htm]
    The above documentation is based on webdynpro version.
    Check this [documentation|http://help.sap.com/saphelp_erp2005/helpdata/en/43/0fa05e9e242a8be10000000a1553f6/frameset.htm] for BSP application modes.
    Regards,
    Anil Kumar

  • Overview of all SD business processes within a Client?

    Hello Experts,
    There is an internal requirement within our Org. I need to get and inform all the SD business processes that are used by a Client. Is there any short cut/t.code for viewing that or I have to go to se16 and give the document types, look for entries and decide the most used process etc...how to go about this.
    Regards,
    Raj

    Dear N Raja,
    Not sure any T-code exists for your requirement.
    It is easy to find out from Order types- sales area assignment. Here you can find out the diffrent processes (Order types) mapped. Use each order type, take one document number, take document flow identify the steps invloved from order - billing, contract - billing, free goods, foc's, intercompany's etc.
    Regards,
    Deepu Pillai

  • Study business process requirements in sd implementation project?

    how to study business process requirements in sd implementation project?

    Hi chandu,
    I will suggest you first go through the document given below
    SAP Implementation is the whole of processes that defines a complete method to implement SAP software in an organization. The SAP implementation method described in this entry is a generic method and not a specific implementation method as such. It is based on best practices and case studies from various literature sources and presents a collection of processes and products that make up a complete implementation method to allow any organization to plan and execute the implementation of SAP (ERP) software.
    Concept Definition
    CHANGE MANAGEMENT ***Activities involved in (1) defining and installing new values, attitudes, norms, and behaviors within an organization that support new ways of doing work and overcome resistance to change; (2) building consensus among customers and stakeholders on specific changes designed to better meet their needs; and (3) planning, testing, and implementing all aspects of the transition from one organizational structure or business process to another. (www.gao.gov)
    CHANGE MANAGEMENT DOCUMENTATION All documentation that is required and being delivered whilst performing change management, e.g. the functional test cases and all the other documents a new end-user of SAP requires and the various tools and approaches used to manage change by the TSO. (Anderson, 2003)
    COST OF OWNERSHIP ANALYSIS Determination of where and when the costs are inquired within the context of the SAP solution stack and ongoing operations. The analysis addresses all internal and external costs, both one-time as well as recurring (Anderson, 2003)
    CUTOVER The process of transitioning from one system to a new one (Anderson, 2003)
    CUTOVER PLAN All documentation related to planning, preparing and executing cutover, describing how to lock down the system from a technical change management perspective, preparing the TSO for its new role and rolling out the SAP graphical user interface to all future end users. (Anderson, 2003)
    DATA CENTER A data center is a facility used for housing a large amount of electronic equipment, typically computers and communications equipment. (www.wikipedia.org)
    DATA CENTER REQUIREMENT A requirement for the SAP data center, i.e. a physical requirement like power requirements, a rack requirement, a network infrastructure requirement or a requirement to the network server. (Anderson, 2003)
    DISASTER RECOVERY (DR) REQUIREMENT Requirement that focuses on downtime that lasts many hours to days or even weeks (Anderson, 2003)
    FUNCTIONAL TEST CASE A set of conditions or variables under which a tester will determine if a certain business process works (www.wikipedia.org)
    HIGH AVAILABILITY (HA) REQUIREMENT Requirements that describes the amount of time that the system needs to be available to satisfy the needs of the users. (Anderson, 2003)
    INSTALLATION DOCUMENTATION All documentation related to the installation of an end-to-end SAP solution (Anderson, 2003)
    OPERATIONS MANUAL The collection of current state system documentation, day-to-day and other regularly scheduled operations tasks, various installation and operations checklists and how-to process documents. (Anderson, 2003)
    SAP SAP AG is the name of the biggest European software company. The head office is in Walldorf, Germany. SAP was founded in 1972 as Systemanalyse und Programmentwicklung ("Systems Analysis and Product") by five former IBM employees in Mannheim, Germany. (www.wikipedia.org)
    SAP IMPLEMENTATION PROJECT PLAN A comprehensive project plan that contains all products that are delivered whilst performing an SAP implementation project (Anderson, 2003)
    SOLUTION STACK Set of software subsystems or components needed to deliver a fully functional solution, e.g. a product or service. (www.wikipedia.org)
    SOLUTION STACK PARTNERS LIST A list of all vendors that deliver the products that make up the SAP solution stack (Anderson, 2003)
    SOLUTION VISION A vision of the future-state of the SAP solution (Anderson, 2003)
    STRESS TEST PLAN A test plan that is focused at determining the stability of a given system or entity. It involves testing beyond normal operational capacity, often to a breaking point, in order to observe the results. (www.wikipedia.org)
    TEST PLAN A detail of how the test will proceed, who will do the testing, what will be tested, in how much time the test will take place, and to what quality level the test will be performed. (IEEE 829)
    TRAINING The acquisition of knowledge, skills, and attitudes as a result of the teaching of vocational or practical skills and knowledge that relates to specific useful skills (www.wikipedia.org)
    TRAINING PLAN Consisting of training units, a training plan is the result of hierarchical decompositions of a training goal, tailored according to the learning preferences and prior knowledge of the trainee. A plan is the means by which the trainee satisfies the goal. (www.ece.eps.hw.ac.uk/)
    TSO Technical Support Organization. The people that are committed to implementation and management of SAP. (Anderson, 2003)
    TSO CHART A chart that depicts the structure of the TSO. (Anderson, 2003)
    Activity Sub-Activity Description
    Project preparation Craft solution vision Refine and communicate a SOLUTION VISION of the future-state of the SAP solution, to sketch a design that meets both business and financial requirements. The focus should be on the companyu2019s core business and how the SAP solution will better enable that core business to be successful.
    Design and initially staff the SAP TSO Design and staff the key positions of the SAP Technical Support Organization (TSO), the organization that is charged with addressing, designing, implementing and supporting the SAP solution.
    Sizing and blueprinting Perform cost of ownership analysis Perform a COST OF OWNERSHIP ANALYSIS to determine how to get the best business solution for the least money i.e. to determine where and when the costs are incurred within the context of the SAP solution stack.
    Identify high availability and disaster recovery requirements Determine all HIGH AVAILABILITY and DISASTER RECOVERY REQUIREMENTS, to plan what to do with later downtime of the SAP system
    Engage SAP solution stack vendors Select the best SAP hardware and software technology partners for all layers and components of the SAP SOLUTION STACK, based on a side-by-side sizing comparison
    Staff TSO Staff the bulk of the TSO, i.e. fill the positions that directly support the near-term objectives of the implementation, which are to develop and begin installation/implementation of the SAP data center.
    Execute training Train the various members of the SAP TSO, like data center specialists, high availability specialist and network specialists and train the end-users to give all the required SAP knowledge and skills
    Setup SAP DATA CENTER Build a new SAP DATA CENTER facility or transform the current data center into a foundation capable of supporting the SAP SOLUTION STACK
    Perform installations Install the (My)SAP components and technological foundations like a web application server or enterprise portal.
    Round out support for SAP Identify and staff the remaining TSO roles, e.g. roles that relate to help desk work and other such support providing work.
    SAP functional development Address Change Management Develop a planned approach to the changes in the organization. The objective is to maximize the collective efforts of all people involved in the change and minimize the risk of failure of implementing the changes related to the SAP implementation.
    Address SAP systems and operations management Create a foundation for the SAP systems management and SAP computer operations, by creating a SAP OPERATIONS MANUAL and by evaluating SAP management applications.
    Perform functional, integration and regression tests Test the SAP business processes, by executing functional tests to ensure that business processes work, integration tests to ensure that the organizationu2019s business processes work together with other business processes and regression tests to prove that a specific set of data and processes yield consistent and repeatable results.
    Final Preparation Perform systems and stress tests Plan, script, execute and monitor SAP STRESS TESTS, to see if the expectations of the end users, defined in service level agreements, will be met.
    Prepare for cutover Plan, prepare and execute the CUTOVER, by creating a CUTOVER PLAN that describes all cutover tasks that have to be performed before the actual go-live
    Go Live Turn on the SAP system for the end-users
    Hope this will help.
    Reward Point if helpful.
    Thanks,
    Raja

  • New Business Process Requirement

    Hi All,
    I have a new business process requirement from my client.
    My Client has their own product which they do normaly sell them and is called product A. Now they are planning for some new products. For this they purchase some WIP materials called product B & C from vendors and assemble them along wth product A. The assembled product which is called D is sold as finished product. this product D consists of product A and product B&C. Now in this type of scenario what should be the planning strategy? And also please let me know how to incorporate the assembling part in the present SAP system?
    Thanks,
    Rinky

    Rinky,
    What is the problem?  D is just another finished goods.  Is there something unique about this scenario?
    D BOM = A, B, C
    D assembly effort is contained in D routing, the same way you would create a routing for any other FG product.
    D strategy is whatever your client wants.  MTS?  MTO?  Forecasted?  You pick the strategy the same way you would pick any other FG planning strategy.
    A you need change nothing
    B you need change nothing
    C you need change nothing
    Am I missing something here?
    Rgds,
    DB49

  • Untrusted connection message is losing me registrants, clients and business though the SSL works with all other browsers?

    I set up a registration form for a client that requires SSL and the untrusted connection message is losing me registrants, my client and business though it works with all other browsers. I don't need the info about how individuals can disable it -- obviously that is not going to make my client satisfied.

    Can you post a link?
    Did you check that all needed intermediate certificates are send?
    * http://www.networking4all.com/en/support/tools/site+check/

  • Activites in Recruitment Module

    Hi,
    Plz let me know what are all the activities required to configure Recruitment module in R3
    Thanks in advance

    Hi,
    The recruitment Module activities are as follows:
    1.     VACANCY MANAGEMENT
    2.     APPLICANTS
    3.     RECRUITMENT MEDIUM  & INSTRUMENT
    4.     APPLICANT ADMINISTRATION
    5.     SELECTION OF APPLICANTS
    6.     ADMINISTRATION OF APPLICATION GROUPS
    7.     TRANSFER OF APPLICANT DATA TO P.A.
    8.     APPLICANT DATA  & REPORTING.
    The recruitment module in integration with PA, OM and PD are done for the following purposes.
    u2022     Personnel Administration u2013 for internal sourcing
    u2022     Organizational Management u2013 for creation and maintenance of vacancies
    u2022     Personnel Development u2013 for profile match up and creating skills and    proficiencies for each position.
    Regards
    Raviiiiiiiiii

Maybe you are looking for