Recruitment module

Hi Friends,
I am working on recruitment module. I am stuck in the initial data entry screen In PB10.
When I try to create an initial data entry screen the first screen gets saved but the next screen create applicant activities throughs an error message " No infotype found , maintain infogroup modifier/usergroup".
But i understand in Recruitment The IGMOD Feature is not to be maintained.
Again when I press enter two times It gives an another message "No application assigned to this applicant no."
But I have included thses infotype IT4000, 4001, 4002 and 4005 in the infomenu during configuration in applicant actons.
what is that I have missed?where?
Request for an early responce.
Thanks!
Sunita

Hi,
Check the user group of the infomenu and might need to correct your user group. You can check your user group by using transaction SU3 and clicking on Parameters tab and then check the parameter id UGR.
Thanks

Similar Messages

How to add letters to applicant activities in recruitment module

Hi Experts,
We have created letters in recruitment module through tcode So10
Here im in confusion where shall we add these lettes in the module.
We have to add for Acknoeledgement,invitation for interview,offer letter and rejection letter.
kindly advice.
Vsai.

Hi Vicky,
You assign letters to activities by implementing feature PACTV.
Please assign the standard text name to IDTXT field.
Regards,
Dilek

Error in Recruitment module

Hi SAP Gurus:
My query here is that in the recruitment module, while doing prepare to hiring action, we face an error calle MESSAGE_TYPE_X
when we exit and do the action again, we do not get it.
did debug it and found out the following reason:
I had a look at your system and was able to simulate the problem you
mentioned. The reason what I could find out is the following.
In your configuration of the view V_T751E, for the action type
'04'(Offer applicant contract) an infogroup 'W4' is attached. Through
this infogroup 'W4', an insert(INS) is done to the infotype 4002
(V_T588D). This configuration means that when we execute the action type'04', the infogroup 'W4' will also get executed which would bring up
the screen 'Change Vacancy Assignment Status' using which we can change
the status to '5'.
Now, SAP provides a dynamic action in standard which would update the
vacancy assignment status. Please see the calling of the form routine
SUBMIT_RPAPUT00_WITH_APPLICANT in the view V_T588Z. Here in this form
routine, we update the vacancy assignment status to 5, when we execute
the action '04'. So the updation of the status is already done. After
this only the infogroup 'W4' is processed which will try to update the
status again to '5'. This leads to some buffering issue in the system
and as a result of this it is trying to insert the same record again.
Hence the update of the database fails and the system dumps. So
basically the dynamic action in T588Z as well as the infogroup 'W4' are
doing the same thing. Both are updating the vacancy assignment status.
So I would suggest you to kindly use either one of these since
ultimately both of them are doing the same action. So either you can
remove the infogroup assignment to the action '04' in V_T751E or you cancomment out the calling of the form routine -
SUBMIT_RPAPUT00_WITH_APPLICANT in the dynamic action which SAP provides
in the standard.
Even after correcting this, i am facing with the same problem.
please advise,
Ayyaps

MASSN Determining the Fast Entry Dialog Module
Object
    Feature
Use
    Transaction
Procedure
    You select an action for fast entry in the entry screen of transaction
    PA42.
    The return value of the feature is a dialog module taken from table DCT.

Documentation Help on E-Recruitment module implementation

Hi Experts,
I need Documentation related to implementation of E-recruitment Module in EP and also its features and benefits.
Help needed urgently.
Thanks & Regards,
Shailesh Nagar

It depends upon the Business packages you are using, E-recruitment version and the application modes (webdynpro and BSP's).
If you are using mySAP ERP 2005 Business Package version 1.0, check this [documentation|http://help.sap.com/saphelp_erp2005/helpdata/en/31/3a1665fe7741d5b6501cd505a6bd82/frameset.htm]
The above documentation is based on webdynpro version.
Check this [documentation|http://help.sap.com/saphelp_erp2005/helpdata/en/43/0fa05e9e242a8be10000000a1553f6/frameset.htm] for BSP application modes.
Regards,
Anil Kumar

What are the pre requisites for E-Recruitment module?

Hi all,
What are the pre requisites for implementing E-Recruitment module ?
Does it require Hr module or as stand alone it can work?
Regards.
Rajendra

Thanks Aniket
Will the following configuration work as e-recruitment stand alone mode.
WAS with ABAP stack + E-Recruting 6.0 sp + Java stack + Portal + ESS MSS Business package ( for e recruiting).
Regards
Rajendra

Recruitment Module - requirement analysis of client's business processes

Dear Friends,
Greetings to All,
My client informed me to prepare a questionnaire on what all the information is required from the HR department relating to Recruitment activity to configure the Recruitment module in SAP.
I want to know what all the areas to be considered in preparing this document such as, Number Ranges, Recruitment media, Recruitment instruments, applicant structure and so on.....
Can any expert help me in this regard as what all the areas I have to consider in preparing this questionnaire document. I am working on ECC 6.0.
Appreciate your responses.......
P. Sai Narayana
SAP Functional Consultant

Hi Manoj,
Thank you so much for your response.......
At present my objective is to provide the Client a Questionnaire......which should cover all the information I require for the Recruitment module - Business process of their company which is called as a Q&A database.....which we provide the client before preparing Business Blue print to study their business processes.......
The weblink which you have provided me is so helpful for e-Recruitment.........But our client is interested in Recruitment not e-Recruitment....
Can you please send me any information on this regarding to my mail ID.....[email protected], if you have.......
Thank you once again.......
Sai

Reg : Training and Recruitment Modules Document

Hi Gurus,
                i am new one in SAP HR Module.My concern told me to implement
Training and Recruitment Modules but i know only ABAP Concepts so i need functional Concepts and also i need Modules integration and data flow of these modules.i have searched documents regarding these modules in Net but not yet get thses modules.if anybody having these modules material Please send it to me.it would be very helpful for me.
ID : [email protected]
      [email protected]
      [email protected]
Regards
P.Senthil kumar

These are the best sites to refer to - from the owners of the system:
http://help.sap.com/saphelp%5Ferp2005/helpdata/en/77/bff8ab4a2911d182b80000e829fbfe/frameset.htm
http://help.sap.com/saphelp%5Ferp2005/helpdata/en/5a/d35bcc544811d1895e0000e8323c4f/frameset.htm

Generating Offer Letter & Data Transfer in Recruitment Module

Dear Gurus,
1) We are implementing Recruitment module and i am quite new to it. Could any one of you suggest what are the sequence of steps required to maintain to make sure that a Standard offer letter is generated and how to mail it to the applicant while you perform Offer Applicant Contract activity. Kindly suggest how to move further to fulfill this requirement.
Kindly note this is pure Recruitment module and e recruitment is totally out of scope.
2) How do you transfer applicant data to Personnel Adminstration module when the Applicant action Prepare for Hiring is run.
Kindly suggest the sequence of steps to be followed to make sure the data transfer happens from recruitment to personnel adminstration.
Kindly also let me know what are the mandatory switches that have to be activiated in T77S0 table to set up an integration between PA & RC.
3)When you hire a external applicant whose data is already there in PB10 and when you hire him for suitable vacancy and do the data transfer to PA. The next time when i try searching in the applicant pool will the Applicant group change from External applicant to internal applicant in case of hired applicant. If yes how to go about it.
Kindly throw some light on this. Please note we would like to go about the standard functionalities of SAP Recruitment module.
If there is any challenge in fulfilling the above requirements, kindly point out the same so i can address the same to my client...
Regards,
Kiran

Hi Ravi,
You can do the initial data entry of the applicant through Tcode PB40 or PB10. Once you have maintained the data, then you can do the applicant actions like given below through Tcode PB40.
Enter additional data
Reject applicant
Put applicant on hold
Process applicant
Offer applicant contract
Applicant rejects offer
Change of org. assignment
Further application
Invite applicant.
It is not compulsory to do all these actions, but these actions are useful to keep a track of applicants.
Then you have to do applicant action prepare for hiring through PB40. After doing prepare for hiring action you can transfer the applicant data to Personnel administration through Tcode PBA7. Once the data is transferred personnel number is generated for applicant. Then you have to complete the activities throug Tcode PBA8.
Few tables for configuration of recruitment :
T750D - for creating media for recruitment
V_T750C - Recruitment instruments
T750K - Applicant group
V_T750F - Applicant range
V_T751E - Applicant action type
V_T588D - Infogroup for Applicant action
Shrikant

Recruitment module ---interview call letter through email

Hi Gurus
My client is implementing Recruitment module ( Not E- Recruitment module), they asked for is there any why to send interview call letter to the candidateu2019s personal email ID through SAP. Is it required to activate any BAdi.
Is this a customized scenario or a standard settings?
Please advice.
Thank you,
Srinvias

yes there is standard apllication for getting the mail activated viz applicant activity types/ status......
below is the part which has to be customizied in order to get the mail activated..... you choose feature PACTV for assigning the aplicant activity types to the status of the application.... based on which automatically the mail can be triggred........and feature MAILS define the activiyt type and the std text which you want to activate.... ex Below the std text used is MAIL-APP-INTERVIEW which will be called if activity is appointment for interview..... meaning of variuos variable can be found in the forum.....
APACT Applicant activity type
005 Appointment for interview
IDTXT MAIL-APP-INTERVIEW
RECV1
RECV2 X
RECV3 X
SUBTY 0001
OUTBX X
After this you have to take care of the standard text in SO10 and here you will need a abaper to put the variable name etc which you would require... to place....
if any further queries ...let me know..
regds
SS

Recruitment module implementation for - Singapore HR

Can I configure iRecruitment just like Recruitment module. In India team implemented Recruitment. Is iRecruitment configuration same as this

in india
Income Tax
Provident Fund
Professional Tax like that
now iam workin for UAE project
we have some deduction like GOSI deduction like that
every where the Gross part i mean IT008 0014 0015 00267 will be same the net part will be different
u know the rest as ur working of Singapore

Activites in Recruitment Module

Hi,
Plz let me know what are all the activities required to configure Recruitment module in R3
Thanks in advance

Hi,
The recruitment Module activities are as follows:
1.     VACANCY MANAGEMENT
2.     APPLICANTS
3.     RECRUITMENT MEDIUM & INSTRUMENT
4.     APPLICANT ADMINISTRATION
5.     SELECTION OF APPLICANTS
6.     ADMINISTRATION OF APPLICATION GROUPS
7.     TRANSFER OF APPLICANT DATA TO P.A.
8.     APPLICANT DATA & REPORTING.
The recruitment module in integration with PA, OM and PD are done for the following purposes.
u2022     Personnel Administration u2013 for internal sourcing
u2022     Organizational Management u2013 for creation and maintenance of vacancies
u2022     Personnel Development u2013 for profile match up and creating skills and    proficiencies for each position.
Regards
Raviiiiiiiiii

Screen Modifications Recruitment Module

Dear All,
I wanted to make screen modifications for Intial entry of basic data's initial screen and even organisational assignment and other recruitment infotypes. But unable to find any pertaining to them. Can any one suggest me on this...
Regards,
Rajasekar

Hi,
Check feature MASSN via PE03: Determining the Fast Entry Dialog Module.
And check the return value in table TDCT, you will find the screen and program call by PB40 Initial Entry of Applicant Data.
And you can create your own dialog module to adjust the initial screen or change the exist one.
Hope helps,
Chen Jian

Deletion of Advertisement in Recruitment Module - SAP

How to delete advertisement in Recruitment which has been posted or Maintained in PBAW..
I want to delete the advertisements which has been posted. what is T Code to delete it.

Hi,
reading the logs, I found this error:
Method OSoft.Services.Webservice.FileAccessService.FileAccessService.ReleaseAllLockOfUser not found
Regards,
Alessandro

Need help for Recruitment module

i am new to SAP,can any body tell me what are the tables in recruitment module

Hi,
Check this link.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/72/c9b54015c4752ae10000000a155106/frameset.htm
Probably this is the only available document for e-recruiting.
If you have market place ID then check this link too.
https://websmp205.sap-ag.de/hrrecruit
Regards,
Amit
Reward all helpful replies.

The question about Recruitment module.

Dear all,
I can not use infotype for recruitment such as: IT4000,4001,4002,4003,.. This is have eror mess "My system Applicant data infotypes are not suitable for this transaction" so what's the reason ?
Please help me,
Thanks you so much
Huyen Nguyen

please refer to sap note 384571 which solves your problem. its a program error which sap has corrected

Recruitment module

Similar Messages

Maybe you are looking for