Recruitment: Multiple Actions on the same day

Hi expert,
Understand that in PA, we are able to perform multiple actions on the same day with the aid of Additional Actions infotype (0302).
However, in Recruitment module (i.e. PB), we are unable to perform the above, the previous action record will be deleted, thus we can't keep track of the actions taken.
Can we extend the use of Additional action infotype to Recruitment (PB db) ? or is there other way to perform multiple actions on the same day in Recruitment ?
All advises are appreciated.
cheers,
Sophie Tran.

Hi,
Please check the below link for that..
http://sap.ittoolbox.com//groups/technical-functional/sap-hr/recruitment-multiple-actions-on-the-same-day-384674
Thanks & Regards,
Sandip Biswas

Similar Messages

Two actions on the same day

Hi Experts,
I have activated the additional actions, even though i am not able to perform two actions on the same day. When i am running the second action on the same day, system deletes the first action. Plz help
regards
Kunal

Hi Kunal..
Check below:
Cause and prerequisites
You use the functions 'Additional actions' (infotype 0302) (that is, flag ADMIN EVSUP = 1 in table T77S0). If you delete or shift a created personnel action type 'Leaving' and then create a new personnel action without leaving the transaction, on the list screen of infotype 0000, the system does not display the last but one personnel action.
Solution
To correct the display problem, start report RPUEVSUP for the affected personnel number. Then check Customizing of the personnel action types (table T529A), since the report sets indicator U0302 (update of infotype 0302) active for all personnel actions.
Hope this helps ! if so reward.
Thanks
Shyam

Prevent multiple personnel actions being performed on the same day

Hi Experts,
Does anyone know if it is possible to prevent multiple personnel actions from being performed on the same day even where the action does not change the status of the employee?
Regards,
Janet

Hi Janet,
i mean to say if you activate the additional action then only the second action on the same day gets stored in to the IT-0302.
if you dont activate additional actions then if you run the second action on same day it will over write the existing record and gives warning message that this record over write the existing record.
so here the point is if additional actions is activated then only system allows you to perform the second action on same day..
other wise it will replace the existing record.
if you want to prevent the additional actions to be prevented even after activating it --i think its not possible because the functionality of the IT 0302 is to save more than one record.
yes you can restrict the to perform the action through authorizations
hope it is clear
regards,
mohammed

Multiple Meter Reads on the same day and Billing

Hi All,
There is a requirement to hold all reads received from Customer/ Meter Reader etc even they these are received on the same day for e.g. schedule read could be received in the morning, followed by customer read through internet and then another customer read through IVR system.
Can we store multiple reads on the same day?
If a read goes into implausible and then it's corrected, implausible read is replaced by corrected read. Is there any way to store old implausible read?
Thanks in advance.
SJ

Your questions answered below:
1. So my question is can we enter multiple reads to the Meter on a single day with same meter read reason? - Yes when we have MR reason which is not relevant to billing. In your case its 09 which is nonrelevant and you should be able to enter multiple reads with different time.
Make sure you supply time also when you are submitting your read. However there is a restriction of what level you can enter multiple MRs since SAP stores read at Minute level so you can not post 2 reads in same minute.
2. Are there any configurations to be done to allow multiple meter readings on a single day? - Not sure but standard SAP should allow you to save multiple MRs with the above rules.
Cheers
Jignesh

Multiple leave requests on the same day

We would like to enforce a check so that multiple leave requests of the same type cannot be submitted for the same day on ESS.
How can this be achieved ? We are on EP 7.0 and ECC 6.0 and are using webdynpro java version of the ESS applications.
Any configuration available for this or does this require a BADI implementation ?
Thanks in advance.
Thank You,
Raj

http://wiki.sdn.sap.com/wiki/display/ERPHCM/ValidationsforESSLeaverequest
read here, it requies a badi implementation only, no config is available!
You have to call backend exits from the badi of leave request
Edited by: Siddharth Rajora on Aug 2, 2011 7:48 AM

A few days ago my TV show and movie displays went whacky-the shows are no longer in alpha order, there are multiple listings of the same show, the pictures are random-including album covers. I downloaded latest version. Any ideas??

A few days ago my TV show and movie displays went whacky-the shows are no longer in alpha order, there are multiple listings of the same show, the pictures are random-including album covers. I downloaded latest version & no change. Any ideas??

ME TOO.
I think mine are all still in alphabetical order, but :
* movies I deleted from my library and told "hide this purchase in the cloud" are showing up again. If I try to play them, I get the "cannot find the file in its proper location, would you like to locate it" error message.
* for movies that have "iTunes Extras," the extras show up as a separate item, with another copy of the movie artwork. Most of these I believe I had DELETED the "iTunes Extras" anyway.
* Items are showing up multiple times.
* A few MUSIC ALBUMS are listed in my Movies section.
* Some movies (I believe ones that I deleted off my HD but are still in the cloud) are showing random album covers instead of their proper artwork.
* Just rented a movie, and it didn't show up anywhere in my library. It downloaded properly and completely, was in a suitably labeled folder in my iTunes/Media/Movies section, but didn't show up in any section of the library (or via a library search). Had to manually find it and tell it to open the file using iTunes.
Running the latest version, even checked for updates. No other changes made lately since the last round of apple software updates. This was wonky before the latest small update to iTunes - now it's even wonkier. And it is very, VERY effing annoying.

How to have multiple images on the same screen? like in the movies where you see several actions at

how to have multiple images on the same screen? like in the movies where you see several actions at the same time ....
i don't find a tutorial in adobe tv....
thanks !!

The short answer is that you'll put the source clip(s) for each inset on a different video track, all stacked up. Then use the Scale and Position effects (under "Motion" on the Effect Controls panel) to reduce their size and place them where you want.
If the content of an inset will involve edited content (where you're cutting among various clips or just trimming out unwanted content from a single clip), then you'll probably find it easier to do all those edits in one sequence, then nest that sequence in the master sequence, where you apply the Scale and Positioning effects. That will save the step of applying the scale and position effects to each edited track item.

Problem running multiple folder actions at the same time

Hi,
Does anyone have some experience running multiple folder actions at the same time?
I've written a Applescript folder action that processes some files. When adding some files, the script starts and all goes well. The processing of each file takes a few minutes, but all files are processed correctly.
However, when adding some new files to the dropfolder, while the folder action is all ready processing other files dropped a few minutes earlier, the process that is all ready running immediately aborts and the folder action is relaunched on the new files, leaving the old files for what they are...
The same problem occurs with multiple folders, each having a folder action attached. When dropping files in "Folder A", the script starts processing. But if someone droppes files in "Folder B", The script of folder A aborts, and the script of folder B starts processing. When adding more files to the folders, the result is the same. In some casses, when the last dropped files are processed, the os continues where the operation was aborted on the previous files. But this not always happens. To make things worse, when you remove the items from the folders afterwords, the folder actions starts running again on items no longer present in the folder !!!!
Does anyone know how I can prevent the folder action being aborted when new files are dropped and placing the new files in "Hold", until the previous files are processed? How can I prevent a folder action being aborted when a item is dropped into another folder?
I've written a small script to test this behaviour. Just create one or more folders and attach the script below. Drop a item into the folder, wait a few seconds and drop another one in the same or another folder. To monitor what happens please check the console.
on adding folder items to this_folder after receiving added_items
          set FolderName to this_folder as string
          set ItemName to added_items as string
          repeat with theIncrementValue from 1 to 15
delay 2
                    do shell script ("logger \"Folder: " & FolderName & " - Item: " & ItemName & " - Step: " & theIncrementValue & "\"")
          end repeat
          do shell script ("logger \"Folder: " & FolderName & " - Item: " & ItemName & " - Done...\"")
end adding folder items to
Thanks for any feedback.

That is pretty much the way Folder Actions work, especially since AppleScript is not multi-threaded. If you are using them as some intermediate step in a workflow, you might rethink the way you are handling the files (for example, use a droplet instead). Other options would be using launchd to watch a path or a shell script on a different thread.

When I enter an event in iCal, soon thereafter multiple other "New Event" notices (one to four) appear for the same day. If I delete these unwanted "New Event" notices, they later reappear -- sometimes multiplying like rabbits. Any suggestions?

When I enter an event in iCal, soon thereafter multiple other "New Event" notices (one to four) appear for the same day. If I delete these unwanted "New Event" notices, they later reappear -- sometimes multiplying like rabbits. Any suggestions?

Well, using iMovie to rearrange clips in a mini DV video edited by another program is extremely time consuming. I found a workaround. It still takes time, but it's much faster than rearranging the clips using iMovie.
The workaround is as follows. Bring up Finder and go to the directory where your event's clips are stored (typically ~/Movies/iMovie Events/<name of event>). It helps to setup Finder to be in Cover Flow mode, so you can see the beginning of each clip. Then, sort the files in ascending order by the 'Date Modified' field. This makes Finder sort the files in the same order that they were imported from the mini DV tape. Clips with timecodes have the naming convention "clip-<year>-<month>-<day> hour;minute;second.dv". Clips without timecodes use another naming convention. With the files sorted by "Date Modified" in Finder, rename clips as needed so that the date/time in their file names are in ascending order. Note: when you rename a file, you need to restart iMovie. I suggest not running iMovie while renaming files.
I believe the file date/timestamp is only accurate to the second. Occasionally, there may be a couple of clips that have the same date/timestamp. This may cause the ordering to not be correct. The best way to find these is through iMovie. To modify a file's date/time, right click on the clip in the event in iMovie, and then select "Adjust Clip Date and Time...".
So, this workaround is a lot easier and faster than trying to rearrange things from scratch in iMovie. But it's still time consuming. Creating a project out of an already edited video should take less than 5 minutes (not counting import time), but that's not the case.
I submitted an enhancement request to Apple asking if they can add an option to sort an event's clips in the order that they were imported by iMovie. Those who have the same issue as me, I suggest you submit an enhancement request as well.
Anyone have any other suggestions?
Thanks.

Running multiple batch actions on the same folder? One Click?

We run Actions on a group of images using CS4 with the File->Automate->Batch function. We use this to take, for example, 200 images from a set folder and run an "Action" to create a rendered 2D design and save it in a different location to the source image and add an extension to the file name, leaving the source image unaltered.
The problem is that we then require to run this 20 times, each time, the difference is :- we want it to save to a different location and the "action" used is different because it changes the colour for example.
The desired output is:
FROM A JPEG ---> 20 folders (named as 20 different colours) and all our images rendered (as in our action) and saved into the 20 folders
So we have 20 versions of each image
Currently we simply set off the different actions in a batch separately, IE. 20 lots of batches to set off.
So for example:
* We have 200 jpeg images in folder [A]
* We run a Batch function to run an "action" on all 200 images in folder [A] to render into our design and add a blue colour overlay (this is all done in the action itself) and to save them to folder [B] with the extension (BLUE) added to the filename.
* Once Photoshop finishes running this Action on the 200 images (wish it would beep or something to let you know it was finished) we then run a batch to run a different "action" on the same 200 images in folder [A] to render the design and add a pink overlay and to save them in folder [C] with the extension (PINK) added to the filename
And so on and so forth for the 20 different actions.
Is there a way we can instruct Photoshop to run all of these 20 actions (one after the other in a queue as it where) without having to "Babysit" Photoshop and ask it to run each one off ourselves manually?
Would we have to use JavaScript for this? We have no experience with JavaScript at all.
We are currently using Photoshop CS4, is there a easier way to do this on CS5 or CS6?
Kind Regards and Thanks in advance
Steven

Would we have to use JavaScript for this?
I think it would be advisable but (if you don’t mind risking getting less help) you could use VB or AppleScript depending on your platform.

Sharing one iTunes library across multiple accounts on the same Mac

Hello, I've poked around at some of the posts dealing with sharing one iTunes music library across multiple accounts on the same Mac but it seems like this can only be done if the libary is moved to a shared folder. I realize this can be done but I was trying to share it the way it is described in a post on Apple support (See link below.). That post seemed to imply that you don't have to move the library from its original location (owned by account A, e.g.), rather just make a couple preference changes in the accounts, use fast user switching and voila. That doesn't seem to work. So my question is this: Is the only way to share one iTunes music library across multiple accounts on the same Mac to move it to a shared folder? I'm running 10.4.8 on an Intel iMac. Thanks in advance!
http://docs.info.apple.com/article.html?artnum=93195

After reading this and several other related threads, I am becoming thoroughly confused about all of this. I have a situation similar to the one that pokerpal described in the post dated January 7 at 8:06 pm, except that the music files on my system are located on an external hard drive. Everything else is pretty much the same though - I am the admin user (and the main iTunes user and maintainer) and my girlfriend is a standard user who has no music in her own iTunes library. She can see and listen to and make playlists from and sync her iPod with the music in this library from her account, and I can do the same thing, independent of her, from my account. And if I make a change to information within a song, she doesn't see it, and vice versa, and I understand that. What I don't understand is why when I add a song or an album to the music files by importing a CD or downloading something from the iTunes Music Store, she has no way of knowing that unless I tell her, and then she can add it to her library by using the "Add to Library" function. Is there no way of automatically updating her library files to add the new song(s)? We have almost 15,000 songs and videos in that library, and I don't even want to think about what might have to happen if the answer to my question is "no." Interestingly enough, if I put an update to a Word document in the same exact location (on the hard drive), we can update that and pass it back and forth all day - why is that such a difficult task for iTunes to accomplish?
Sorry I went on so long, but this has been building up for some time, and none of the solutions I've read about here have really been of any help, so I'm a bit frustrated and, as I said at the beginning, confused.
iMac G5, MacBook Mac OS X (10.4.8)

What is the best way to have multiple devices on the same account so we can still share the same library. Right now I have 7 and I believe it's causing them to malfunction.

I have multiple devices on the same itunes library and they all starting to have the same issues. Not recognizing numbers previously stored, not sending/receiving tests. Do I need to get everyone separate itunes accounts?

What is the best way to set up itunes on our home network?
One iTunes library per person. One iTunes account per person.
If people wish to share songs, they can make copies.
When the inevitable day comes when the kids get older, you will not have to come back here and post asking how all that stuff can get separated!

WDS 2012 R2 - Cannot PXE multiple clients at the same time

Hello All,
This is my first post on here so I apologize if this is the wrong place. I work for a school district and we are implementing WDS 2012 R2. We've been extremely satisfied with the speeds and ease of use through unattend files. However, for
the past month I've been looking for a possible answer to a problem that has plagued us from day one of implementation.
So here's the problem:
I have a stand alone WDS server which is not a domain controller and is not our DHCP server. I have IP helpers and broadcast forwarders setup on the network. As well as option 66 and 67 in DHCP. So far so good right!
Well that's partially right. When we boot one client at a time to the WDS server. Everything works as intended. We can TFTP the necessary files from the WDS server. Everything boots up and we're off and running.
However, if we boot up two or more clients at the same time. The WDS server never responds to the traffic. The clients get their DHCP information. They start the referral and download from the WDS server, but get no response. I'm
really hoping that someone on here would have some insight of something I can try. I've about exhausted my list of peers and contacts. They're all stumped as well and were smart enough to stay with 2008 WDS.
I would prefer to stick with 2012 R2 since it's setup and working for the most part. With only this one hiccup.
Thanks in advance for any guidance!

Hello Daniel,
I appreciate the reply and apologize for taking so long to get back to this. Things have been a little hectic over here.
I have tried everything on this forum and I am still unsuccessful in PXE booting multiple clients at the same time.
Multicast is enabled on the server, and it works for the clients. However, as stated in the original post. I cannot boot multiple machines at the same time. I can start them from the image selection screen around the same time though. So,
that appears to be working fine.

Multiple Browsers with the same Page Flow

I have a legacy application that I am working on migrating to Weblogic. The
legacy application allowed the user to have multiple windows of the same
module open at the same time. Users found this useful if they wanted to look
at two different records in the same module. For example, if you had a
registration app and you wanted to look at Joe's registration information
and Sue's registration. Is it possible to have two browsers within the same
session open and pointing to the same RegistrationController.jpf?
Thank You.
Michelle

I believe our problem is that our form beans are class members of the page
flow thus when you open another instance of the same controller the form
beans are overwritten. Our GUI is displayed as modules containing multiple
tabs with a form bean for each tab. The module has a controller, signifying
the page flow for the module. So, one record in a module will span multiple
tabs. We did not want to have one big form bean that is why we multiple
form beans. But it now looks like we will need to store these form beans
perhaps to the session in a collection identified by the window instance
they belong to.
We also need to do multiple different page flows but I don't think nested
page flows will not work here because the page flows would almost need to be
nested of each other. I guess you could almost think of as each module is
an independent application however some can be invoked by others.
<Rich Feit> wrote in message news:[email protected]..
Hi Michelle,
Yes, that should be just fine. That page flow will remain the "current
page flow" as requests from both browser windows hit it. The NetUI
runtime synchronizes the action methods, so you don't need to worry about
thread-safety within them.
There's also a way to have multiple different active page flows at the
same time, but in this case you don't need to do anything special.
Rich

Multiple consumers of the same Queue

In the past my use of JMS queues has been limited to a single message producer and a single consumer. I am now looking at having multiple copies of the same consumer running for load balancing and failover purposes, and this leads me to what I think is a basic question. BTW, we're running OpenMQ 4.4u1.
I have messages being produced and saved in a single queue.
I then have a consumer program whose logic is something like this:
1. Create session with no transaction and CLIENT_ACKNOWLEDGE.
2. Receive message from queue.
3. Do some processing with message. Repeat processing attempts multiple times, if needed, until successful.
4. Once processing is successful, acknowledge message.
Assume that I am running multiple copies of the consumer in separate JVMs (or on separate servers, for that matter).
Here are my related questions.
1. If step 3 takes a long time (e.g., several minutes) can I be sure that only one instance of the consumer will receive the message?
2. If a consumer is in step 3 and a catastrophic failure occurs (e.g., the JVM or server it is running on crashes) the message will never be acknowledged, but the session will not be shut down in an orderly fashion, either. Will the message that was received but never acknowledged eventually be delivered to another copy of the consumer?
3. If step three takes a very long time (hours or days, rather than minutes), will the broker misinterpret this as a failure of the consumer and deliver the same message to another one of the consumers?
Thank you for reading and/or responding to this question.
Bill

1. If step 3 takes a long time (e.g., several minutes) can I be sure that only one instance of the consumer will receive the message?A queue message will only be delivered and consumed by 1 consumer.
2. If a consumer is in step 3 and a catastrophic failure occurs (e.g., the JVM or server it is running on crashes) the message will never be acknowledged, but the session will not be shut down in an orderly fashion, either. Will the message that was received but never acknowledged eventually be delivered to another copy of the consumer?Yes.
3. If step three takes a very long time (hours or days, rather than minutes), will the broker misinterpret this as a failure of the consumer and deliver the same message to another one of the consumers?No, as long as the consumer's Session or Connection are intact

Recruitment: Multiple Actions on the same day

Similar Messages

Maybe you are looking for