Rectangle frames are missing the frame inside

Hello everyone
I was making a design comp for a website and the Rectangle Frame Tool suddenly stopped displaying the X-shaped frame inside the bounding boxes as shown in the capture below:
I first thought the disappearance of the inside frame may be due to the undefined solid colour, but then setting the solid car would not bring back the frame.
Please someone help me restore the frame.
Thank you in advance,
Ead

Great! Switching to the Normal mode has restored the X-shaped frames.
Thank you,
Ead

Similar Messages

Why does the click-hold to reveal the image area outside the frame work on only some images?

I just upgraded to ID CC 2014 and the click-hold function to reveal the image area outside the frame only works for some images. Any suggestions?
Jim

Thanks, Peter. That could be the problem--operator error. But, I did a restart and all seems fine. If I get another image with a display issue, I'll be back

I recently transferred my ITunes library to an external hard drive. I made sure to copy all the data from the saved location. After the transfer I noticed that a lot of albums are missing the first song and some recently purchased albums are missing.

I recently transferred my ITunes library to an external hard drive. I made sure to copy all the data from the saved location. After the transfer I noticed that a lot of albums are missing the first song and some recently purchased albums are missing. Is there any way to recover the data? Thanks for any help.

I may have found an answer here:
http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive
They only thing I can assume is that my external hard drive was slow to start and iTunes defaulted to its old directory (see the last paragraph at the link above). However, once my external was recognized shouldn't everything have fixed itself?
Message was edited by: williamson42
Message was edited by: williamson42

If the connecting fields are missing the data from knvh should be u00BBnullu00AB

Could you help me I would like to have all fields from kna1 (if the connecting fields are missing the data from knvh should be »null«)in following code
select * from kna1 .
select * from knvh where kunnr = kna1-kunnr and vkorg = '0200'.
itab-mandt = kna1-mandt.
itab-stceg = kna1-stceg.
      itab-hkunnr = knvh-hkunnr.
      itab-datab = knvh-datab.
      itab-datbi = knvh-datbi.
    append itab. clear itab.
endselect.
endselect.

HI,
use the following code
select * from kna1 into table it_kna1.
if sy-subrc = 0.
select * from knvh into table it_knvh
for all entries in IT_kna1
where kunnr = it_kna1-kunnr
   and vkorg = '0200'.
if sy-subrc = 0.
loop at it_kna1 into wa_kna1.
itab-mandt = wa_kna1-mandt.
itab-stceg = wa_kna1-stceg.
loop at it_knvh into wa_knvh where kunnr = wa_kna1-kunnr.
itab-hkunnr = wa_knvh-hkunnr.
itab-datab = wa_knvh-datab.
itab-datbi = wa_knvh-datbi.
append itab.
clear itab.
endloop.
endloop.endif.
endif.
I hope this solves your problem
Regards,
Vara

.Issue with creating a photo book in Iphoto error message states some frames are missing images, but I've checked each one and from I can see they are all filled in. It won't let my buy the book though

Having an Issue with Creating a photo Book in Iphoto. I continue to get an error message when clicking on "Buy Book" The error indicates that I'm missing a frame or frames from the book. I've checked this many times and cannot locate the issue. The book appears to be complete from my perspective. What can I do now? I worked very hard on this and would hate to lose it all.

How did you check the book? Did you preview it?
See:
iPhoto, Aperture: Previewing an order in iPhoto or Aperture
Is that the message?
"your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can buy this book."
The most common reason for this error is, that you have used a page layout that needs a background photo and you have not yet added the backdrop. Then the book is still showing some default grayscale image.
Check, if one of your page layouts is using this background:
Then you need to add a photo to the background of the page.

Configuring Frame-Relay and the Frame-Relay Switch To Participate in WAN Routing

Hey,
My WAN in my voice lab is currently functional between all of my routers HQ, BR1, and BR1 with full-mesh connectivity. I am using my PSTN router for the frame-relay switching as is shown in the attached configs. I have used the connect commands for the PVC routing logic.
connect HQ-BR1 Serial0/3/0 101 Serial0/2/0 201
connect HQ-BR2 Serial0/3/0 102 Serial0/2/1 301
connect BR1-BR2 Serial0/2/0 202 Serial0/2/1 302
My question concerns the possibility of getting the PSTN router to participate in the WAN and the OSPF routing process? The connect command tells how the PVCs are to be connected and pass through the PSTN router. Is there anyway to do it so that a PVC connects to the PSTN router itself?
I would specifically like to create a connection between the HQ and PSTN router over the WAN. If anyone has any insight on this I would really appreciate it.
Thank you.

Hello Adam,
you don't need to do FR switching.
You just need to configure a back to back PVC associated to a p2p subinterface under PSTN router interface se0/3/0 and HQ:se0/1/0. the new PVC can be 103 on both sides
PSTN
interface ser0/3/0.103 point-to-point
ip address 10.1.13.1 255.255.255.0
frame-relay interface-dlci 103
HQ
interface ser0/1/0.103 point-to-point
ip address 10.1.13.1 255.255.255.0
frame-relay interface-dlci 103
note: I was able to do this using the older syntax frame-relay route under interface configuration on frame relay switch. I would expect to work for you too with newer syntax connect.
Hope to help
Giuseppe

When synching Contacts from GMail, some of them are missing the telephone number

I synced my contacts from my GMail account to my iPhone through Microsoft Exchange. All the contacts succesfully appeared in the iPhone, BUT most of them are missing their phone number. I already waited for the sync to end, they just won't appear.

I have same problem. I could only see a fraction of my project photos if I browse the Aperture lbrary. It is the same problem when I sync the aperture photos to my iPhone or iPad. I still cannot solve it but I know a way to go around it for your iMovie to see the pictures so that you can work on your iMovie.
Here is the work around:
Export the photos from your album to your hard disk and re-import into your iPhoto. Now you should be able to see those photos that you want to work on in iMovie when you browse your iPhot library.

How many are missing the new update?

Only want to know how many **bleep** Nokia customer are awaiting the PR1.1? I still can't understand why they don't send it out to all customer of the N9. If they have a problem say so! I am one that are missing, Sweden Nokia N9 Cyan I will never buy a Nokia phone again...

Yes I was, until frustration led me to ***** and winflash.
Please tell us Nokia how ****has firmware and updates for UK/Ireland where the phone is not ven available to buy, and yet the Swiss version has still no update???
Absolutely crazy way of dealing with software rollout. There is no reasoning behind a staggered release in this day and age, and as this effects unbranded hardware try can not blame carrier intervention.
Whilst I'm enjoying the N9, this my first non apple smartphone since the iPhone launched, it has made me appreciate the way apple roll out updates in a much more professional manner, wherein they treat all consumers in all regions as equals.
Nokia has left a bittersweet taste in my mouth.
No doubt this will all be repeated in a few months when PR1.2 finally / supposedly lands.
MODERATOR'S NOTE: We have edited your post on the subject of Navifirm because you mention the Navifirm service wssed on thhich offers unauthorised copies of Nokia device software for download. We do not allow this tool to be discuis forum.

HT204406 How do I let itunes know they are missing the end of a piece of music?

Prokofiev symphony #2 by Gergiev, the Allegro is missing the last few bars. I have tried downloading it again, but I think it is their file. Thank you.

If it's re-downloaded in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that track and use the 'Report a Problem' link (iTunes support should reply within, I think, 24 to 48 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

HT5148 When I upload to Final Cut Pro X the video appears to lag as if individual frames are missing. Any suggestions or help???

help

Please give the exact specifications of the clips you're editing from the inspector. Please give the exact project properties of the project you're editing in.

Text frames are missing in presentation view (keynote 6.0)

I added a frame to a text via text>layout. They are shown in the navigator view but not in the presentation. What can I do?

Hi all,
I called apple support. The person I spoke with suggested that I use the prior version of Keynote (from i-work 09). That seems to have done the trick for me.
I believe that the programmers for Keynote are looking into this (they asked for my presentation -- but I coudn't send it due to privacy concerns). I hope they manage to resolve this. I'll begin using the newer version once they do.

Why don't still images scale to fit the safe areas of the frame?

Why doesn't Encore offer offer more flexibility for scaling images in slideshows. Yeah, I know it's very cool that it does a scale, but I want everybody who watches my dvd to be able to see ALL of my image. For those who own standard televisions, they won't be able to see the whole image unless I pan and zoom, and even then I have to time the pan correctly.
Programmers, please add a feature so that users have more control over scaling.
Thanks,
Laz!

Said this dozens of times, and will doubtless say it dozens of times more.
There are 2 issues at play here.
1 - Encore is an authoring app, not an editor, and as such it is down to you to prepare your assets correctly.
2 - a standard TV will always crop the images - they overscan. the same image in a progressive scan system will display fully.
So, what you need to do is decide what you need to create your images at, and if you use Photoshop, After Effects or Premiere, then you can use the title safe/Action safe overlays to scale things yourself.
It has to be done this way, as not all TV sets overscan to the same degree - as I just said, Progressive Scan systems and LCD/Plasma screens don't overscan at all.
This is what the safe areas are for.

I put one movie into the middle of another. Now the inserted movie frames are not the same size as the other movie. I can't find how to correct this. Can someone help?

Please help.

If the two files do not have the same dimension you can adjust them via the Movie Properties window.
When you add two files that don't have the same dimensions the default position for the added file is 0,0 (upper left corner).
Open the Movie Properties window, single click on the video track you wish to adjust and then click the Visual Settings tab.
You can then adjust the dimensions (to fit the other track) or the "offset" values to position it (inside or outside of the dimensions of the other track).

Is there a way for Itunes to scan your library to see which songs are missing the original files? I'd like to mass delete songs to save space on my hard drive.

Other than just attempting to play the song I'm not sure of any way to do it.

I have only synced a device on a single occasion in my life. Doesn't it say something about how many songs will transfer?
The laptop is supposed to be the master repository for everything on the iPod and they are designed to be in sync.
You can check the Dougscripts web site. There's all kinds of goodies there but I don't know if the extend to something like this. There's also third party software but again I don't know if it goes to that detail. People usually use it when they are trying to rescue content for a non-backed-up computer.

Editing text in PDFs - only the numbers are missing the font

When editing text in a PDF (created in InDesign), I can edit all the text EXCEPT for any numbers. When I try to input a number, I get the message "The original font XXXX is not available or can't be used in editing. Acrobat is using the font Arial in its place". It then places other characters in its place - not sure what they are but they're not numbers. Anyone have any idea what is causing this?

Sorry, I found my answer here:
https://forums.adobe.com/thread/1582291?q=arabic%20numbers
Apparently, the HINDI DIGITS checkbox under Preferences\Languages is by default checked. This ridiculous default resulted in Arabic numbers when editing the PDF in Acrobat. Editing text was fine, but whenever I would type in a number, it would appear as Arabic characters.

Rectangle frames are missing the frame inside

Similar Messages

Maybe you are looking for