Rectangle purple/pink shade covering the screen on white backgrounds.
Hi,Travis here.I have just one question to ask.I've been using my iPhone 5s for quite some time now.But now I did notice when i use safari or like white backgrounds,I noticed that there is a rectangle pink/purple shade on the screen.It is not a big issue since I can only view it at white backgrounds.I have few of my friends having this issue also.Is this normal?Or is it a hardware issue?I looked up on the internet and they said it's normal.Will the purple/pink rectangle shade gets darker and darker?
try an iOS upgrade to iOS 4.3.5
if not contatct apple
Similar Messages
-
IPhone 6-Darkish band and off yellow color top of screen on white backgrounds.
I'm wandering if anyone is experiencing the following concern that I have? I own the iPhone 6 Silver/White with 16GB mem.
Across the top of the screen on white backgrounds there seems to be a dark shadow cast from the edge.The dark shadowing is most pronounced towards the upper right corner of the screen, slightly in the bottom left (when the phone is held normal... Home button on the bottom (AKA touch ID), volume rocker on the left side).
In the first image you will observe the the upper right corner of the phone is located to the top-left of the image near "21 SEP-Sunday."
In the second image you will observe that I have rotated the screen/phone 180 degrees. The upper right corner of the phone will be in the bottom right of the image. You'll also notice that there is a dark band that runs across the top of the screen, slightly on the bottom.
I noticed this on some of the iPhone 6s at my local Apple store as well. It seemed most common with the White/Gold-silver models. The Black/Space Grays mostly had pristine screens when I compared mine next to them. I was going to show an Apple rep, but there were, no kidding, hundreds of folks waiting in two lines for an iPhone 6. So I didn't bother. I called Apple for a replacement, but they said I would need to send them the phone back first and they do not offer collateral and allowing me to keep the phone until a replacement arrives. That's bogus :-(buldogg77, nbuubu and bwible.
I decided to return the iPHone 6. I have not had good experience with Apple products. I purchased three recently, which all had major issues (purchased within weeks of the iPhone 6). I had a 5s, which was going into low-signal mode and burning out the battery before mid-day. I had a Mac-Mini that kept dropping the wifi signal and had issue reconnecting when waking from sleep (this became nearly useless for anything online) and a iPhone 5c that could not be activated (a complete brick). The 5c was the last purchase (on-top of the Mac-Mini) that made me give up. I was not going to exchange four products that cost around $2k.
I ended up ordering the Moto X second Gen. It has an amoled display and amoleds typically don't have uniformity and hot pixel issues. Also, I got accidental coverage, accessories and 32GB of memory for less than I did for the purchase of the iPhone 6 16GB (about $600 after $50 student rebate). I also found Siri was not as good as Google's voice services (or directions for that matter) and the OS was not as intuitive with multitasking IMO.
I am a fan of Apple products overall and it's unfortunate Foxconn is doing them a disservice. Hopefully you all get your issues worked out. I'm baffled at how Apple products tend to get the best reviews on screen quality. Before a review should be given on accuracy, how about back-light uniformity? That is just as important for the overall user experience IMO. -
I Web 08 Help with page format so that a page when viewed covers the screen
I published my pages to a folder to see how my business site would look to a viewer. It only covers part of the screen and looks dumb. If I leave the background totally white around text and photos, a page will cover the screen but also look dumb due to the big left and right margins. When I looked at other sites created in I Web, they covered the screen. Do the various pages cover the screen when published for real? When I called for help I was told that we are stuck with I Web's format. I would be grateful for anyone who has the patience to help. And I am not HTML savvy. Thanks, M
PS. I also wanted to put a colored border around part of the page but than really narrowed the page for viewing and fitting in the content.
A friend who has a PC used 1 & 1 to build a small professional site. It was easy, inexpensive, and looked professional. Why hasn't apple offered an easy alternative to I Web for building a professional site? Dreamweaver, I am told, is complicated.Welcome to the Apple Discussions. What size screen do you want to cover? My monitor is 1600 pixels wide (a 22" display). To change the size of the page you use the IInspector/Page/Layout pane. But there's a limit to what you can do and have it look good. If you shoot for a larger monitor those with a smaller will be overwhelmed and have to scroll sideways to view the page. I believe iWeb uses as a default size a good compromise for the many monitor sizes out there.
Personally, I don't like sites that cover the entire monitor window and my desktop. Just a personal quirk. -
Satellite P10: white and purple clouds fading across the screen when booting
I had been having problems with my SP-10 laptop so I bought a new hard drive (Fujitsu 60GB instead of standard 40GB) and fitted it myself. I was working fine with this for a long time until suddenly I had the strangest problem I have ever seen on a computer...
Sometimes, when booting the laptop, instead of the normal red "TOSHIBA" screen and the Windows XP startup message, the laptop simply shows some weird white and purple clouds fading across the screen, eventually fading to a very dark but not quite black screen.
I thought to begin with it was a problem with the DVD drive, as when it finally gave in and booted normally, the DVD drive was disabled. However, I have noticed in the BIOS, under "Advanced" that the InfraRed Port shows intermittently - it shows with the [Disabled] setting next to it, but will then disappear from the listing, then reappear again, and then go again and so on.
Sometimes my computer will be operating normally, then completely lock up (mouse and all) and will reboot with the clouds!
I have looked in the Windows Event Viewer for when the notebook has locked up and have seen something to do with an IRQ problem for the Infrared Port. I disabled the InfraRed port in Device Manager (I managed to enable it in the BIOS by loading standard BIOS settings) and restarted, but it started up with the clouds again, so I have a feeling the InfraRed port is the culprit - perhaps faulty hardware/loose connection as it is located quite close to the DVD drive and HD drive.
I was just wondering if anyone has ever seen anything like this before on ANY computer, and if they knew how to resolve it? It seems completely illogical that a faulty IR port could alter what is displayed on the screen at bootup, unless of course there is something wrong with the boot sector of my HD?
Any ideas?
Thanks.
TomWell I can assure you my laptop has an InfraRed Port on it - I used to use it with my mobile phone for various things but don't bother now.
Good idea about attaching another monitor - hadn't thought of that. I will see what I can come up with.
I simply don't understand how anything except the display driver could be causing this, unless of course, another piece of hardware is conflicting with the display driver. But then why would it be intermittent and not constant? Anyway, I don't seem to have had the problem since I disabled the IR port (except the first time I disabled it) so here's hoping it's fixed.
Will definitely try attaching another display though. Good thinking.
Thanks,
Tom -
How can I install the iMac Graphics Firmware Update 2.0, if the screen is white and I can't get to the Apple menu? My computer has 5 vertical purple lines against white screen at startup before the Apple logo appears and the spinning gear...then everything disappears and the screen hangs on the white screen. I have tried unplugging and removing all my peripherals and the COMMAND, OPTION, P & R set of keys and still nothing. I have tried COMMAND C to start up from cd and it only tells me to turn off the computer and turn it back on. I found information on Apple's Support pages regarding the iMac Graphics Firmware Update but I am unable to download and install if I can't get to the Apple menu. Can anyone help?
You may have hardware problem, I think a visit to your local Apple Store or AASP is in order.
-
WHEN I OPEN IMESSAGE THE SCREEN BLANKS WHITE AND AFTER A FEW SECONDS CLOSES IMESSAGE AND GOES BACK TO HOME SCREEN!!! HELP ME I HAVE NO IDEA WHAT TO DO!!!!
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Messages>Send and Receive and sing out and sing back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I have had a number of issues with my Intel Mac recently and had to reboot using disk utilities, safe mode, OSX recovery, but always come back to the login screen but when I type my password the screen goes white and returns to the login screen. My password is correct and the login does not jiggle as it would if the password was wrong. Please advise,
Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
Briefly, you need to delete the following file:
/var/audit/current
If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
mount -uw /
You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
Next, type the following command:
rm -i /var/audit/current
Press return. You should get the following output:
remove /var/audit/current?
If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
Finally, enter the command:
exit
Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
Credit for this solution to ASC user AnthonyTW. -
My daughter tried to play the My Horse game on her Ipod touch that she got for Christmas and when she opened the game it said something about sending "push notifications" and gave the choice of "don't allow" or "ok"...we chose "don't allow". After that the screen went white and now we cannot get the Ipod touch to respond to anything. I tried holding the sleep/wake button to try to restart it and it doesn't seem to work. Any suggestions to get this device working again???
Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If that doesn't work, try a Restore:
From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad.
There's more that you can do. Post back if none of the above solves the problem.
By the way, I always allow "push." That allows the app developer to "push" information to your device rather than waiting for you to ask for it. However, "don't allow" shouldn't cause the problem that you're experiencing. -
Hi,
I was wondering if someone can help me. I have a MacBook Pro, it has came up saying I need to free up space on the disk as it full every time it starts up, so I log in and no icons or applications show up on the screen just my background wallpaper, the only thing I can do is the force quit keyboard shortcut but there is nothing to quit, I have tried to start up in safe mode but again there is no icons in the desktop,
I have my disks that came with my laptop I have went into disk utility to repair disk and I still seem to have the same problem .. No icons or apps or anything lol just the cursor I can only shut down the laptop via power but and the press shut down.
Please help I am going out my mind with this thing :(
Thanks x jadeThis can be used to boot the machine and delelte enough files to get it to boot normally.
.Create a data recovery/undelete external boot drive
Read about storage drive so you can store your extra stuff.
Most commonly used backup methods
Also here to see how a full boot drive slows the machine down
Why is my computer slow? -
After the screen turned white and the folder popped up, it just kept flashing. After a few minutes the screen just turned white completely and I could hear the noise of the drive. It just sat there still with the noise for a good few hours until the battery died and then my mac just shut down completely. I tried to see if the computer could charge, and it does charge. I just can not turn the computer on no matter what. It is dead. It might be the logic board or the drive...I'm hoping it won't cost me a new computer because I just got this 5 months ago....
Do not attempt to charge as that will only make the damage worse. You need to take the MacBook Air to an Apple store genius bar and have the technicians check and see what repair work is necessary. It only takes a very small amount of liquid to cause short circuits and damage.
-
This happened all of a sudden. Before I came home, my iPod Touch 4g was working fine. Its when I got home, the screen turned white. Its running on IOS 6.1.3 . Well, the bottom half of the screen. I have no idea what or how it happened.I tried using the hard reset but it didnt work. It still works the screen is still responsive, I can use app watch videos and listen to music. I just need to know how to fix it so the bottom part of the screen is not white and not make it a hassel. I want to know how this happened so me and others know what to do.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I can no longer see my pictures.....the screen is white boxes but when I click on the box an exclamation point pops up. Please Help!!!!
The exclamation point occurs when iPhoto breaks/loses the file path to the original file. So try the following: make a temporary, duplicate copy of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot AND
the option to rebuild the small thumbnails.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
When I went to turn the desktop on, the start up sound came on. Then the screen was white with an icon flashing. The icon is a file folder with a question mark on it. I cannot get it to fully turn on. HELP
Run a disk repair tool on the hard disk or install a new OS.
(59898) -
My 27" iMac will not boot in normal mode. The screen stays white. The computer will boot in safe mode. Could this be virus related or is it possibly an issue with my video card. Before this happened, my computer screen was flashing weird things and the computer would unexpectedly power down.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' sub(/ :/,"");{ print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.appex\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
At first my laptop was fine after the earphone end got stuck in. Soon it started getting slower, and suddenly it stopped switching on. The people in the service station said that it wAs because the hard disk drive was corrupted. I came back home, and immediately it stopped working again. This time they said it was because of water spill. They changed the entire key board and then it started working for a while. Later I updated to maverick and that slowed down my computer. Once, I switched on my laptop, logged in, and then the screen went white. When we took it to the service center they said they will need to replace the hard disk. I am not sure what I should do. Any suggestions?
Liquid damage from water spill is progressive, unfortunately.
Best.
Maybe you are looking for
-
Ipod Touch Recovery Mode Loop - Error Code 14
I attempted to update my Ipod Touch (3rd Gen 32 GB) to the latest firmware (IOS 5 i think). It froze during the process and has since been stuck in a Recovery Mode loop. I have followed all recommendations on their website, called Apple support and r
-
I have here an iPod touch Model number a1288 but the last number to me also looks like a 3. But that isn't my point. I'm here asking this question,. I broke my screen today and I was wondering if it mattered or not if i put on a ipod touch 2nd or 3rd
-
WLCS_DOCUMENT_METADATA and Multi valued attributes
Hi, We use Interwoven as our back-end content management tool, i have read in the documentation that we can have a mutlivalued attribute on a piece of content, and the operator CONTAINS is what you use to construct a query to search for a certain val
-
How do I turn off smart tags? I am not sure if that is the correct name for them. Everytime I click any button lately, I get a dropdown menu; it is getting very frustrating. I am sure I have clicked on something that activated this, but cannot find w
-
Installing LV Runtime on PC with VEE Runtime already installed?
My LabView programs have to coexist on a PC that has Agilent VEE programs on it already. At least until my programs are fully accepted, then the VEE stuff will slide to the side. Can LV runtime be installed on a machine that has VEE runtime on it al