Rectangular marquee does not snap to grid even though snap to grid is checked under view

Hey all,
I cannot snap to a grid even though snap to grid is checked under view > snap to > grid. Unless I am zoomed in all the way, when I drag marquee, it always snaps two pixels above or two pixels below where I'm trying to snap to grid, which is the green line I created. I don't know if this is a Photoshop bug but it's clearly not snapping to the grid for me unless I am zoomed in all the way, but then at that point, I have to drag it across the whole document and because I'm zoomed in so far, it takes several minutes.Any reason why snap to grid not working in PhotoShop CS4?
Thanks for response.

it always snaps two pixels above or two pixels below where I'm trying to snap to grid, which is the green line I created.
Green lines for the Grid? Did you change the color in the Preferences specifically?
And your use of the singular »line« is a bit suspicious – are you sure you are talking about the Grid and not Guides?

Similar Messages

  • My iPhone 5 does not show caller name even though the number is saved with a name in contacts

    My iPhone 5 does not show caller name even though the number is saved with a name in contacts

    Contact your carrier. Caller ID is a carrier feature.

  • Ever since I upgraded to IOS 7 on my iPad, it does not remember my passwords, even though I check "keep me signed on".  Is there a setting somewhere that I am missing?  I did not have this issue with the previous OS.  Thank you.

    Ever since I upgraded to IOS 7 on my iPad2, it does not remember my passwords, even though I check "keep me signed on".  Is there a setting somewhere that I am missing?  I did not have this issue with the previous OS.  Thank you.

    Thank you, James, but I do have a WiFi connection on the iPad mini. The Numbers files update on my iPad third generation and iPhone just fine when connected to the same network.
    Do you have any other suggestions?
    Thank you!

  • My mail does not come in automatically even though i have it set as auto. I need to click on get mail each time

    My email does not come in until I click on get mail. I have the check mail set automatically in my preferences under general. What am I doing wrong? Cheers John

    OK Vicky, good clues...
    See if this helps...
    Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
    Resetting your keychain in Mac OS X...
    If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
    http://support.apple.com/kb/TS1544

  • Add downloads to most recent documents feature does not seem to work even though set to true?

    Even with browser.download.manager.addToRecentDocs set to true, downloaded items (such as a PDF) are not added to the Windows "Recent Items" folder. I am running Windows 7, Firefox 16.
    Thanks!

    Please update to Firefox 20, then let us now if you still have problems [[Update Firefox to the latest version]]

  • Mozilla does not remember ldap password, even though I check the "remember" checkbox.

    Every time I enter an email address, Mozilla pops up the "LDAP Server Password Required". I enter the password and check the "Use password manager to remember this password". Then the message pops up again. I enter the info again. Then it accesses the LDAP server. But next time I type in an email address, it hasn't remembered the password.
    Thanks, Vilis

    It could be the password files are corrupted and not accepting changes, so I would delete (or move to a safe location) these files from the profile folder: keys.db, signons.sqlite, signons#.txt. Select Help/Troubleshooting Information, click Show Folder to open the profile folder, exit TB, and delete or move the files.
    You can record any stored passwords before doing this by opening Tools(or AppMenu/Options)/Options/Security/Passwords/Saved Passwords, as deleting the password files from the profile will erase all stored passwords.
    http://kb.mozillazine.org/Password_Manager#Troubleshooting

  • Have most recent macbook pro connected to thunderbolt via thunderbolt cable.  Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard.  Help

    Have most recent macbook pro connected to thunderbolt via thunderbolt cable.  Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard.  Help

    Hello QuinnDev,
    Thank you for posting in the Apple Support Communities.  It sounds like you are trying to use your MacBook Pro with a Thunderbolt Display in closed clamshell mode (MacBook Pro closed), but sometimes the display doesn't stay on.  I found an article that talks about closed clamshell mode.  You would have to fulfill the following requirements to use your display this way:
    Requirements for closed display mode:
    Power adapter
    External keyboard, mouse, or trackpad
    External display
    You can find all the steps and the full article here:
    Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
    http://support.apple.com/kb/HT3131
    I hope this helps!
    All the best,
    Sheila M.

  • I was directed to adobe to download CS4 on my new iMAC after hardware failure on PC.  The valid CS4 serial number for the PC is not recognized by Adobe, even though I downloaded all the software successfully.  They gave me a free 30 day trial.........Does

    I was directed to adobe to download CS4 on my new iMAC after hardware failure on PC.  The valid CS4 serial number for the PC is now not recognized by Adobe, even though I downloaded all the software successfully on the new iMac..  They gave me a free 30 day trial on the new iMAC.........Does this mean I have to spend a lot of money to update and activate the latest CS release on the new machine ??????

    Purple Lobster your Creative Suite 4 serial number is for Windows or Mac only.  If you were previously using it on Windows then it is likely you have a Windows license.  You can verify by checking your serial number at http://www.adobe.com/.  You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
    If you wish to run Adobe Creative software on your new iMac then I would recommend a Creative Cloud complete or single application membership.  You can find more details at https://creative.adobe.com/plans.  There is also a 30 day trial available for the Creative Cloud if you wish to evaluate the newest versions of the Adobe Creative applications.

  • What do I do if my new macbook air does not accept my password even if I've tried more than a few times?

    Hi there,
    Just bougiht a new macbook air and the start up screen is not accepting my password even though I have typed it in a few times and correctly. I have already used this mac previously for 2 days and have added microsoft office today but this is the first time I have logged in since the installation.
    I don't understand why the password isn't being accepted. Could it be the installation? Or do I need to reset my macbook air?
    Just a note, I'm not proficient using a Mac.This is my first macbook.
    Many thanks for the help.
    Tony

    You can reset your password with the install cd or usb ...
    Follow these steps to reset a password when there is only one administrator account on the computer, or if the original administrator account needs a password reset. "Original" administrator account refers to the one that was created immediately after installing Mac OS X. If the original administrator password is known, that administrator account may be used to reset the passwords of other administrator accounts using the steps described above. These steps require an optical drive; if your Mac does not have an optical drive and you have a Mac OS X v10.6 Install disc, see below.
    Start up from a Mac OS X Install disc (one whose version is closest to the version of Mac OS X installed).  Usually, you can start from the disc by putting it in your computer, restarting, and holding the C key. Or, put it in the computer and click the Install or Restore icon you see in the disc's main window (after which the computer will start from the disc without you needing to hold C). Or, you can use Startup Manager or the Startup Disk preference pane to select the Install disc.
    Choose a language, click the arrow button to continue,
    Mac OS X v10.6 or later: Choose Password Reset from the Utilities menu.
    Mac OS X v10.5 or v10.4: Choose Reset Password from the Utilities menu.
    Mac OS X v10.3: Choose Reset Password from the Installer menu.

  • I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

    I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

    Mac 101: File Sharing
    Mac OS X 10.7 Help: Transfer files between two Mac computers
    Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
    Mac OS X 10.7 Help: Use iDisk to share files
    Mac OS X: Sharing your files with non-Apple computers
    How to share a Mac's files with a PC and vice versa.

  • When i place my photo, the adjustments tab does not pop up, and even when i click image at the top, I cannot select any adjustments-brightness/contrast,hue-saturation, color blance, etc..Anyone know what I am doing wrong?

    When i place my photo, the adjustments tab does not pop up, and even when i click image at the top, I cannot select any adjustments-brightness/contrast,hue-saturation, color blance, etc..Anyone know what I am doing wrong?

    Good day!
    What is "place" supposed to mean – open, place as Smart Object, …?
    What are the image’s Color Mode and bit depth?
    Could you please post a screenshot with the pertinent Panels visible?
    Does Window > Adjustments not raise the Adjustments Panel?
    Regards,
    Pfaffenbichler

  • TS3274 my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody

    my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody

    try restoring see guide
    http://www.ipadforums.net/ipad-help/2987-how-put-your-ipad-into-recovery-mode.ht ml

  • After moving my music library from my old mb to the new one, my new mb pro does not play the files evenly. It takes a break for two sec's and starts playback where it stopped. Ideas anyone?

    After moving my music library from my old mb to the new one, my new mb pro does not play the files evenly. It takes a break for two sec's and starts playback where it stopped. Ideas anyone?

    I may have found an answer here:
    http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive
    They only thing I can assume is that my external hard drive was slow to start and iTunes defaulted to its old directory (see the last paragraph at the link above). However, once my external was recognized shouldn't everything have fixed itself?
    Message was edited by: williamson42
    Message was edited by: williamson42

  • My CD drive does appear on the desktop even though Finder preferences indicate it should and so do the System preferences. I'm unable to burn a CD-R in iTunes. It tells me the CD burner is being used by another application?

    My CD drive does appear on the desktop even though Finder preferences indicate it should and so do the System preferences.
    I'm unable to burn a CD-R in iTunes. It tells me the CD burner is being used by another application; however, I seem to find out what's using it.
    I'm unable to eject the CD since it not shown on the Desk Top. I have to restart the system to eject the CD?
    Very unclear as to what is happening?

    My CD drive does appear on the desktop even though Finder preferences indicate it should and so do the System preferences.
    I'm unable to burn a CD-R in iTunes. It tells me the CD burner is being used by another application; however, I seem to find out what's using it.
    I'm unable to eject the CD since it not shown on the Desk Top. I have to restart the system to eject the CD?
    Very unclear as to what is happening?

  • How do I know if the person I sent the files to received them? I had not received any notifications even though I checked that box...

    I sent some photos with Adobe Send. I checked "Notify me when recipient viewed." I have not received any notifcations, even though it has been several weeks. Does this mean the recipient never got them? Doesn't the recipient receive an email from Adobe with download information?

    Hi Rocket4,
    Yes, your recipients would've received an email from Adobe with a link to the file that you sent.
    If Notify When Recipients Viewed was selected for that file, you should definitely have received notification when your recipients viewed their file. So, it could be that the emails were delivered to a junk mail folder.
    You can also see who's viewed your files by logging in to cloud.acrobat.com/send, and clicking the file that you sent. On the right side of the window, you'll see Viewed By, with details of who's viewed your file, and how often.
    I hope that helps.
    Best,
    Sara

Maybe you are looking for