Rectify the error message-How to resolve
Hi.
I am new to the Mac OS.
I'm facing the problem that I'm not sure how to solve this error message.
When I tried to compress the PDF (from print section) and there is an error message displayed....
Automator could not convert the input data to the desired type.
I really appreciate if you could help me to solve.
Thank you
Questions concerning Automator and Applescript and such are better posted to the OS X Technologies list.
It would also help if you included the Automator script (screen shot of the actions will do) and a description of what you are trying to do and what you have done.
I;ll try to get a host to move this post over.
regards
Similar Messages
-
How to rectify the error message " duplicate data records found"
Hi,
How to rectify the error "duplicate data records found" , PSA is not there.
and give me brief description about RSRV
Thanks in advance,
Ravi AlakunltaHi Ravi,
In the Info Package screen...Processing tab...check the option Do not allow Duplicate records.
RSRV is used for Repair and Analysis purpose.
If you found Duplicate records in the F fact table...Compress it then Duplicate records will be summarized in the Cube.
Hope this helps. -
Installing iTunes error message: how to resolve?
I have been running iTunes & Quicktime (QT) successfully (unknown versions) until trying to upgrade to iTunes v8.0.2 today. I have confirmed that QT 7.2 Player has installed and is running OK, but no version of iTunes will now install despite following all the uninstall/reinstall procedures posted here and by Apple.
The iTunes installation is wound back after the following error message appears when writing the system registry values: 'Could not open key: HKEYLOCALMACHINE\Software\Classes\.m4a\OpenWith List'. I have administrator rights to Windows and can edit the key but don't know what value to modify.
Could someone please help?Are you using the same account as you used when you first installed iTunes?
If you have another admin account, it might be worth trying that.
These odd registry permission problems can sometimes be fixed by repairing the registry permissions using the method in this article:
http://blogs.msdn.com/astebner/archive/2006/09/04/739820.aspx
If you decide to have a go with it, the tool takes quite a long time to run so be patient with it.
This sort of problem used to crop up quite a lot and the method was very useful then, but the problem seems to have become less common lately. -
How to clear the error message?
I use the <h:message> tag to show the error message, how can i clear the error message in jsf , is ajax4jsf can do so? thanks!
The messages are request scoped. Why do you want to clear it anyway? Once no error is occured, then no message will be displayed.
-
I am running Windows 7 and have tried to install iCloud. No matter what instructions I follow, I still get the error message "This Apple ID is valed but is not an iCloud account." How can I resolved this?
I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish -
How to resolve the error message "JBO-25009" in ADF table?
Hi all,
There is a master detail form in jsff page using adf application. Detail is represented as ADF table. In the adf Table we have 4 primary key, two foreign key from master table.
Type of primary key in master are Big Decimal and String. When I input value in field of detail, we get error message :
"JBO-25009: Cannot create an object of type:java.math.BigDecimal from type:java.lang.String with value:AC".
How to make if I input value in detail table don't show the error message?
Please let me know if you have any solution for this.
Thanks.Hi Rakesh.
I don't try insert String into Big Decimal variable. I have adf table with 5 column and 4 primary key. The type of primary key are: 1Big Decimal and 3 String.
Now, I want to insert data to the table. when I input data to first column (primary key : Big Decimal) is work well and then I want to insert data to second column (primary key : String) with value "AC"
but when I insert, the error message is show "JBO-25009: Cannot create an object of type:java.math.BigDecimal from type:java.lang.String with value:AC".
Why the error message is show when I insert data to second column with type String and I have been input data with String value?
Are the second column is remember of type first column is Big Decimal ?
Thanks. -
The error message "An undefined AIM socket error has occurred." comes up when I try and log on to ichat.
I have the same issue. Does anybody know why this has happened
-
how do I get ITunes back when I get the error message :
The application "ITunes" unexpectedly quit while trying to restore it's windows. Do you want to restore it's windows?
I already tried reloading ITunes and it still doesn't startup.You didn't mention but are you still running a version of iPhoto older than iPhoto 11?
If yes, then go to the App Store and purchase the iP 11 app and install it. Back up your photo library first.
Once iP 11 is installed and has imported all your photos do a restart of the Mac.
This should resolve most issues with iTunes 10.6 and you should be able to run iTunes and sync up your iOS devices. -
How to rectify the errors through call transaction metod in bdc
how to rectify the errors through call transaction metod in bdc
Hi ,
View the highlited part of the below code.
REPORT ygfrivat1 NO STANDARD PAGE HEADING
LINE-SIZE 165
MESSAGE-ID yif_groc.
Program YGFRIVAT1
Function Report to Upload the VAT Adjustment File.
Author ARENAPU
Date 11.05.2007
PMTS AM12810157
Transport G6DK937834
Description:
Modification log:
1. Changed by :
Changed on :
PMTS :
Transport :
Tag :
Description :
T A B L E S D E C L A R A T I O N S
TABLES: edidc, "Control record (IDoc)
edids, "Status Record (IDoc)
t001w.
Internal Tables Declaration.
Internal table to hold data from table EDIDS
DATA: BEGIN OF t_edids OCCURS 0,
docnum LIKE edids-docnum,
logdat LIKE edids-logdat,
logtim LIKE edids-logtim,
countr LIKE edids-countr,
credat LIKE edids-credat,
uname LIKE edids-uname,
END OF t_edids,
Internal table to hold data from table EDIDC
BEGIN OF t_edidc OCCURS 0,
docnum LIKE edidc-docnum,
rcvprt LIKE edidc-rcvprt,
rcvprn LIKE edidc-rcvprn,
credat LIKE edidc-credat,
END OF t_edidc,
Internal table to hold data from upload file
BEGIN OF t_tab OCCURS 0,
cust(10), "site/customer number
date(10), "transaction date
currency(04), "currency
extnbr(15), "external reference number
pos-cont(05), "POS controler
pos-id(25), "POS id
cashier(10), "cashier name
qualif(04), "qualifier of the article
matnr(25), "article number
qty(10), "quantity
sale(16), "sale value
pos-tr(04), "POS transfert type
paymeth(04), "payment method
final(35), "final price
tarcur(04), "target currency
assign(35), "assignment day
error,
END OF t_tab,
Internal table for Report display.
BEGIN OF t_tab1 OCCURS 0,
cust(10), "site/customer number
date(10), "transaction date
currency(04), "currency
extnbr(15), "external reference number
pos-cont(05), "POS controler
pos-id(25), "POS id
cashier(10), "cashier name
qualif(04), "qualifier of the article
matnr(25), "article number
qty(16) TYPE p DECIMALS 2, "quantity
sale(16) TYPE p DECIMALS 2, "sale value
pos-tr(04), "POS transfert type
paymeth(04), "payment method
final(16) TYPE p DECIMALS 2, "final price
tarcur(04), "target currency
assign(35), "assignment day
END OF t_tab1,
t_tab_temp LIKE t_tab OCCURS 0 WITH HEADER LINE,
Internal table to Validate Customer no.
BEGIN OF t_check OCCURS 0,
werks LIKE t001w-werks,
vkorg LIKE t001w-vkorg,
value(40),
END OF t_check,
t_check_temp LIKE t_check OCCURS 0 WITH HEADER LINE.
Internal table to hold data from table ZCS_PARAM.
DATA: BEGIN OF t_zcs_param OCCURS 0.
INCLUDE STRUCTURE zcs_param.
DATA: vkorg LIKE t001w-vkorg,
END OF t_zcs_param.
*Internal table to hold Messages.
DATA: BEGIN OF t_message OCCURS 0,
msgnum TYPE msgnum,
msgtyp TYPE msgtyp,
msgtxt TYPE msgtext,
END OF t_message.
*Work area for table t_message
DATA : w_message LIKE LINE OF t_message.
Internal table to hold BDC data
DATA: t_bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE,
Internal table to collect error messages
messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
*Internal table to hold messages from call transaction
DATA: BEGIN OF t_text OCCURS 0,
desc(150),
msgtxt(100),
END OF t_text.
D A T A D E C L A R A T I O N S
DATA: n TYPE i,
gv_status(11) TYPE c, "Shows status, Production or Test
gv_exit TYPE c, "Exit Flag
gv_qty(16) TYPE p DECIMALS 2, "Variable to sum Quantity
gv_sale(16) TYPE p DECIMALS 2, "Variable to sum Amount
gv_final(16) TYPE p DECIMALS 2. "Variable to sum Final Amount
DATA: w_text(100),
gv_mode TYPE c,
error TYPE c. "Flag to Indicate error.
CONSTANSTS DECLARATION
CONSTANTS : gc_fieldname LIKE dynpread-fieldname VALUE 'P_FNAME',
gc_seq_no LIKE zcs_param-seq_no VALUE '00110',
gc_object LIKE zcs_param-object VALUE 'YGFVAT',
gc_paraname LIKE zcs_param-paraname VALUE 'VKORG',
gc_back TYPE c VALUE 'N',
gc_error TYPE c VALUE 'E',
gc_all TYPE c VALUE 'A'.
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-001.
PARAMETERS : p_fname LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-002 FOR FIELD p_test.
PARAMETERS : p_test AS CHECKBOX.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK a1.
SELECTION-SCREEN BEGIN OF BLOCK a2 WITH FRAME TITLE text-006.
PARAMETERS : rb_back RADIOBUTTON GROUP rb1 DEFAULT 'X',
rb_error RADIOBUTTON GROUP rb1,
rb_all RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF BLOCK a2.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
*Subroutine to provide F4 help for file name
PERFORM fr_get_filename.
I N I T I A L I Z A T I O N
INITIALIZATION.
*Subroutine to check authorization.
PERFORM fr_authority_check.
T O P - O F - P A G E
TOP-OF-PAGE.
*Subroutine to diplay header
PERFORM fr_display_header.
S T A R T - O F - S E L E C T I O N
START-OF-SELECTION.
*Subroutine to upload data from presentation server.
PERFORM fr_upload_data.
*Subroutine to validate records from uploaded file.
PERFORM fr_validate_data.
*Subroutine to build report internal table.
PERFORM fr_build_rep.
E N D - O F - S E L E C T I O N
END-OF-SELECTION.
*Subroutine to display report.
PERFORM fr_write_report.
F O R M S U B R O U T I N E S
*& Form fr_get_filename
text
FORM fr_get_filename.
DATA : lv_repid LIKE sy-repid, " Report id
lv_file LIKE ibipparms-path. " File Path
lv_repid = sy-repid.
F4 help for file path.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = lv_repid
dynpro_number = syst-dynnr
field_name = gc_fieldname " p_fname1
IMPORTING
file_name = lv_file.
IF NOT lv_file EQ space.
p_fname = lv_file.
ELSE.
MESSAGE e999 WITH 'Invalid Path'(005).
ENDIF.
ENDFORM. " fr_get_filename
*& Form fr_upload_data
text
FORM fr_upload_data.
DATA: lv_fname TYPE string.
CLEAR lv_fname.
lv_fname = p_fname.
Uploading file from PC or presentation server to internal table.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = lv_fname
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = t_tab
EXCEPTIONS
file_open_error = 1.
IF sy-subrc <> 0.
DESCRIBE TABLE t_message LINES n.
w_message-msgnum = n + 1.
w_message-msgtyp = 'E'.
MOVE text-m01 TO w_message-msgtxt.
APPEND w_message TO t_message.
Subroutine for writing log.
PERFORM fr_write_log.
ENDIF.
ENDFORM. " fr_upload_data
*& Form fr_validate_data
text
FORM fr_validate_data.
DATA : lv_lines1 TYPE i,
lv_lines2 TYPE i.
*Obtain Status depending on Check box selected.
IF p_test IS INITIAL.
gv_status = 'PRODUCTION'.
ELSE.
gv_status = 'TEST RUN'.
ENDIF.
*Batch Mode
CLEAR gv_mode.
IF rb_back EQ 'X'. "No Display
MOVE gc_back TO gv_mode.
ELSEIF rb_error EQ 'X'. "Error Only
MOVE gc_error TO gv_mode.
ELSEIF rb_all EQ 'X'. "All Screens
MOVE gc_all TO gv_mode.
ENDIF.
IF NOT t_tab[] IS INITIAL.
SORT t_tab BY cust.
REFRESH t_tab_temp.
t_tab_temp[] = t_tab[].
SORT t_tab_temp BY cust.
DELETE ADJACENT DUPLICATES FROM t_tab_temp COMPARING cust.
IF NOT t_tab_temp[] IS INITIAL.
SELECT werks vkorg FROM t001w
INTO TABLE t_check
FOR ALL ENTRIES IN t_tab_temp
WHERE werks = t_tab_temp-cust+0(4).
IF sy-subrc = 0.
SORT t_check BY werks.
ENDIF.
LOOP AT t_check.
IF t_check-vkorg <> ' '.
MOVE t_check-vkorg TO t_check-value.
MODIFY t_check TRANSPORTING value.
ENDIF.
ENDLOOP.
ENDIF.
FREE t_tab_temp.
ENDIF.
IF NOT t_check[] IS INITIAL.
REFRESH t_check_temp.
t_check_temp[] = t_check[].
SORT t_check_temp BY value.
DELETE ADJACENT DUPLICATES FROM t_check_temp COMPARING value.
IF NOT t_check_temp[] IS INITIAL.
SELECT * FROM zcs_param INTO TABLE t_zcs_param
FOR ALL ENTRIES IN t_check_temp
WHERE seq_no EQ gc_seq_no
AND object EQ gc_object
AND paraname EQ gc_paraname
AND value EQ t_check_temp-value.
IF sy-subrc = 0.
SORT t_zcs_param BY value.
ENDIF.
ENDIF.
FREE t_check_temp.
ENDIF.
IF NOT t_tab[] IS INITIAL.
LOOP AT t_tab.
READ TABLE t_check WITH KEY werks = t_tab-cust BINARY SEARCH.
IF sy-subrc <> 0.
MOVE 'X' TO t_tab-error.
MODIFY t_tab TRANSPORTING error.
DESCRIBE TABLE t_message LINES n.
w_message-msgnum = n + 1.
w_message-msgtyp = 'E'.
CONCATENATE t_tab-cust text-030
INTO w_message-msgtxt SEPARATED BY space.
APPEND w_message TO t_message.
Subroutine for writing log.
PERFORM fr_write_log.
EXIT.
ELSE.
READ TABLE t_zcs_param WITH KEY value = t_check-vkorg
BINARY SEARCH.
IF sy-subrc <> 0.
MOVE 'X' TO t_tab-error.
MODIFY t_tab TRANSPORTING error.
DESCRIBE TABLE t_message LINES n.
w_message-msgnum = n + 1.
w_message-msgtyp = 'E'.
CONCATENATE text-003 t_tab-cust text-004 t_check-vkorg
INTO w_message-msgtxt SEPARATED BY space.
APPEND w_message TO t_message.
Subroutine for writing log.
PERFORM fr_write_log.
EXIT.
ELSE.
PERFORM fr_format_tab.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
DESCRIBE TABLE t_tab LINES lv_lines1.
IF lv_lines1 <> 0.
DELETE t_tab WHERE error EQ 'X'.
ENDIF.
DESCRIBE TABLE t_tab LINES lv_lines2.
IF lv_lines2 <> 0.
IF lv_lines2 <> lv_lines1.
EXIT.
ELSE.
IF p_test IS INITIAL.
LOOP AT t_tab.
*Subroutine to build BDC table
PERFORM fr_fill_bdctab.
*Subroutine to Post Data into SAP.
PERFORM fr_data_posting.
ENDLOOP.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " fr_validate_data
*& Form fr_write_log
text
FORM fr_write_log.
CLEAR error.
error = 'X'.
WRITE:/1 'Msg No'(027), 10 'Type'(028), 20 'Text'(029).
ULINE:/1(120).
FORMAT RESET.
LOOP AT t_message.
IF t_message-msgtyp = 'E'.
FORMAT COLOR 6 INTENSIFIED .
ELSEIF t_message-msgtyp = 'W'.
FORMAT COLOR 3 INTENSIFIED .
ELSEIF t_message-msgtyp = 'I'.
FORMAT COLOR 5 INTENSIFIED .
ENDIF.
WRITE:/1 t_message-msgnum,
10 t_message-msgtyp,
20 t_message-msgtxt.
FORMAT RESET.
ENDLOOP.
ULINE:/1(120).
ENDFORM. " fr_write_log
*& Form fr_write_report
text
FORM fr_write_report.
CLEAR gv_exit.
LOOP AT t_message.
IF t_message-msgtyp = 'E'.
gv_exit = 'X'.
EXIT.
ENDIF.
ENDLOOP.
IF NOT gv_exit IS INITIAL.
EXIT.
ELSE.
PERFORM fr_display_report.
IF NOT t_text[] IS INITIAL.
Subroutine for Display Call Transaction messages.
PERFORM fr_write_msg.
ENDIF.
ENDIF.
ENDFORM. " fr_write_report
*& Form fr_display_report
text
FORM fr_display_report.
IF NOT t_tab1[] IS INITIAL.
CLEAR: gv_qty, gv_sale, gv_final.
LOOP AT t_tab1.
WRITE:/1(10) t_tab1-cust,
13(10) t_tab1-date,
25(05) t_tab1-currency,
32(14) t_tab1-extnbr,
48(09) t_tab1-pos-cont,
60(18) t_tab1-matnr,
80(16) t_tab1-qty RIGHT-JUSTIFIED ,
98(16) t_tab1-sale RIGHT-JUSTIFIED ,
116(07) t_tab1-paymeth,
125(16) t_tab1-final RIGHT-JUSTIFIED,
143(06) t_tab1-tarcur,
152(12) t_tab1-assign.
gv_qty = t_tab1-qty + gv_qty.
gv_sale = t_tab1-sale + gv_sale.
gv_final = t_tab1-final + gv_final.
ENDLOOP.
FORMAT COLOR 3.
ULINE: /(164).
WRITE:/ 'TOTALS',
80(16) gv_qty RIGHT-JUSTIFIED,
98(16) gv_sale RIGHT-JUSTIFIED,
125(16) gv_final RIGHT-JUSTIFIED,
182 ''.
ULINE: /(164).
FORMAT RESET.
ENDIF.
ENDFORM. " fr_display_report
*& Form FR_DISPLAY_HEADER
text
FORM fr_display_header.
IF error IS INITIAL.
FORMAT COLOR 1.
WRITE:/ 'Date upload :'(007), 25 sy-datum, 38 ''.
WRITE:/ 'Production or Test Run:'(008), 25 gv_status, 38 ''.
WRITE:/ 'Upload User Logon :'(009), 25 sy-uname, 38 ''.
ULINE: /(164).
WRITE:/1(04) 'Site'(010),
13(10) 'Date'(011),
25(05) 'Curr.'(012),
32(14) 'Receipt'(013),
48(09) 'Cashier'(014),
60(18) 'Article'(015),
92 'Qty'(016),
102 'Item Amount'(017),
116(7) 'M.o.P.'(018),
128 'Tender Amount'(019),
143(6) 'T.Curr'(020),
152(12) 'Assignment'(021).
ULINE:/(164).
FORMAT RESET.
ENDIF.
ENDFORM. " FR_DISPLAY_HEADER
*& Form fr_newdynpro
text
FORM fr_newdynpro USING program LIKE bdcdata-program
dynpro LIKE bdcdata-dynpro.
t_bdcdata-program = program .
t_bdcdata-dynpro = dynpro.
t_bdcdata-dynbegin = 'X'.
APPEND t_bdcdata.
CLEAR t_bdcdata.
ENDFORM. " fr_newdynpro
*& Form fr_loadfield
text
FORM fr_loadfield USING field LIKE bdcdata-fnam
value.
t_bdcdata-fnam = field.
t_bdcdata-fval = value.
APPEND t_bdcdata.
CLEAR t_bdcdata.
ENDFORM. " fr_loadfield
*& Form fr_fill_bdctab
text
FORM fr_fill_bdctab.
REFRESH t_bdcdata.
PERFORM fr_newdynpro USING 'SAPMWPUK' '100'.
PERFORM fr_loadfield USING 'G_FILIALE' t_tab-cust.
PERFORM fr_loadfield USING 'G_DATUM' t_tab-date.
PERFORM fr_loadfield USING 'BDC_OKCODE' 'BON'.
PERFORM fr_newdynpro USING 'SAPMWPUK' '500'.
PERFORM fr_loadfield USING 'WPSCB01-POSKREIS' t_tab-pos-cont.
PERFORM fr_loadfield USING 'WPSCB01-KASSID' t_tab-pos-id.
PERFORM fr_loadfield USING 'WPSCB01-BELEGWAERS' t_tab-currency.
PERFORM fr_loadfield USING 'WPSCB01-CSHNAME' t_tab-cashier.
PERFORM fr_loadfield USING 'WPSCB01-BONNUMMER' t_tab-extnbr.
PERFORM fr_loadfield USING 'E1WPB02-QUALARTNR(01)' t_tab-qualif.
PERFORM fr_loadfield USING 'E1WPB02-ARTNR(01)' t_tab-matnr.
PERFORM fr_loadfield USING 'E1WPB02-MENGE(01)' t_tab-qty.
PERFORM fr_loadfield USING 'WPSCB03-KONDVALUE(01)' t_tab-sale.
PERFORM fr_loadfield USING 'E1WPB02-VORGANGART(01)' t_tab-pos-tr.
PERFORM fr_loadfield USING 'BDC_OKCODE' 'ZAHL'.
PERFORM fr_newdynpro USING 'SAPMWPUK' '530'.
PERFORM fr_loadfield USING 'WPSCB06-ZAHLART' t_tab-paymeth.
PERFORM fr_loadfield USING 'WPSCB06-SUMME' t_tab-final.
PERFORM fr_loadfield USING 'WPSCB06-WAEHRUNG' t_tab-tarcur.
PERFORM fr_loadfield USING 'WPSCB06-ZUONR' t_tab-assign.
PERFORM fr_loadfield USING 'BDC_OKCODE' 'SAVE'.
PERFORM fr_newdynpro USING 'SAPMWPUK' '530'.
PERFORM fr_loadfield USING 'WPSCB06-ZAHLART' t_tab-paymeth.
PERFORM fr_loadfield USING 'WPSCB06-SUMME' t_tab-final.
PERFORM fr_loadfield USING 'WPSCB06-WAEHRUNG' t_tab-tarcur.
PERFORM fr_loadfield USING 'WPSCB06-ZUONR' t_tab-assign.
PERFORM fr_loadfield USING 'BDC_OKCODE' 'BACK'.
PERFORM fr_newdynpro USING 'SAPLSPO1' '0200'.
PERFORM fr_loadfield USING 'BDC_OKCODE' 'YES'.
PERFORM fr_newdynpro USING 'SAPMWPUK' '100'.
PERFORM fr_loadfield USING 'G_FILIALE' t_tab-cust.
PERFORM fr_loadfield USING 'G_DATUM' t_tab-date.
PERFORM fr_loadfield USING 'BDC_OKCODE' 'BACK'.
ENDFORM. " fr_fill_bdctab
*& Form fr_data_posting
text
FORM fr_data_posting.
IF NOT t_bdcdata[] IS INITIAL.
REFRESH messtab.
CALL TRANSACTION 'WPUK' USING t_bdcdata
MODE gv_mode
UPDATE 'S'
MESSAGES INTO messtab.
IF sy-subrc = 0 .
CLEAR w_text.
LOOP AT messtab.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = messtab-msgid
lang = sy-langu
no = messtab-msgnr
v1 = messtab-msgv1
v2 = messtab-msgv2
v3 = messtab-msgv3
v4 = messtab-msgv4
IMPORTING
msg = w_text
EXCEPTIONS
not_found = 1
OTHERS = 2.
MOVE w_text TO t_text-msgtxt.
CONCATENATE 'Site:'(031) t_tab-cust
'Article:'(024) t_tab-matnr
'Posted Sucessfully'(032)
INTO t_text-desc SEPARATED BY space.
APPEND t_text.
CLEAR t_text.
ENDLOOP.
ELSE.
CLEAR w_text.
LOOP AT messtab.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = messtab-msgid
lang = sy-langu
no = messtab-msgnr
v1 = messtab-msgv1
v2 = messtab-msgv2
v3 = messtab-msgv3
v4 = messtab-msgv4
IMPORTING
msg = w_text
EXCEPTIONS
not_found = 1
OTHERS = 2.
MOVE w_text TO t_text-msgtxt.
IF messtab-msgnr EQ '213'.
CONCATENATE 'Site:'(031) t_tab-cust
'Article:'(024) t_tab-matnr
'Posted Sucessfully'(032)
INTO t_text-desc SEPARATED BY space.
APPEND t_text.
CLEAR t_text.
EXIT. ELSE.
CONCATENATE 'Site:'(031) t_tab-cust
'Article:'(024) t_tab-matnr
'Not Posted'(033)
INTO t_text-desc SEPARATED BY space.
APPEND t_text.
CLEAR t_text.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDFORM. " fr_data_posting
*& Form fr_authority_check
text
FORM fr_authority_check.
AUTHORITY-CHECK OBJECT 'Y_VATADJ'
ID 'VKORG' FIELD t001w-vkorg
ID 'TCD' FIELD 'YGFVAT'.
IF sy-subrc NE 0.
MESSAGE e999 WITH text-m02.
ENDIF.
ENDFORM. " fr_authority_check
*& Form fr_write_msg
text
FORM fr_write_msg.
SKIP.
ULINE:/(164).
WRITE:/
'Messages encountered while Calling Transaction WPUK'(025),
90 'Message Text'(026).
ULINE:/1(164).
LOOP AT t_text.
WRITE:/1 t_text-desc,
90 t_text-msgtxt,
164 ''.
ENDLOOP.
ULINE:/1(164).
ENDFORM. " fr_write_msg
*& Form FR_BUILD_REP
text
FORM fr_build_rep.
IF error IS INITIAL.
IF NOT t_tab[] IS INITIAL.
LOOP AT t_tab.
MOVE:
t_tab-cust TO t_tab1-cust, "site/customer number
t_tab-date TO t_tab1-date, "transaction date
t_tab-currency TO t_tab1-currency, "currency
t_tab-extnbr TO t_tab1-extnbr, "external reference number
t_tab-pos-cont TO t_tab1-pos-cont, "POS controler
t_tab-pos-id TO t_tab1-pos-id, "POS id
t_tab-cashier TO t_tab1-cashier, "cashier name
t_tab-qualif TO t_tab1-qualif, "qualifier of the article
t_tab-matnr TO t_tab1-matnr, "article number
t_tab-pos-tr TO t_tab1-pos-tr, "POS transfert type
t_tab-paymeth TO t_tab1-paymeth, "payment method
t_tab-tarcur TO t_tab1-tarcur, "target currency
t_tab-assign TO t_tab1-assign.
REPLACE ',' WITH '.' INTO t_tab-qty.
CONDENSE t_tab-qty NO-GAPS.
MOVE t_tab-qty TO t_tab1-qty.
REPLACE ',' WITH '.' INTO t_tab-sale.
CONDENSE t_tab-sale NO-GAPS.
MOVE t_tab-sale TO t_tab1-sale.
REPLACE ',' WITH '.' INTO t_tab-final.
CONDENSE t_tab-final NO-GAPS.
MOVE t_tab-final TO t_tab1-final.
APPEND t_tab1.
CLEAR t_tab1.
ENDLOOP.
ENDIF.
ENDIF.
ENDFORM. " FR_BUILD_REP
*& Form fr_format_tab
text
FORM fr_format_tab.
DATA : lv_qty TYPE string.
IF NOT t_tab-qty IS INITIAL.
IF t_tab-qty+0(1) EQ '-'.
CLEAR lv_qty.
MOVE t_tab-qty TO lv_qty.
CLEAR t_tab-qty.
SHIFT lv_qty LEFT CIRCULAR.
CONDENSE lv_qty NO-GAPS.
MOVE lv_qty TO t_tab-qty.
MODIFY t_tab TRANSPORTING qty.
ENDIF.
ENDIF.
ENDFORM. " fr_format_tab -
I just started getting the error message below, when I drag a file to TRASH, I get the message "Finder wants to make changes. Type in your password to allow this." Why ? and how to to stop this request ?
There should be nothing native to the OS X which would ask for a password
or other information on a restart, unless accompanied by the traditional login
box with your user name.
There are adware or marginal products that could be called malware (bad)
that would impose their presence and some items that could have been
downloaded by accident or through some corrupted free software site; of
those some could ask for and gain permission to go through your Mac
and maybe even run in the background to do other nefarious misdeeds.
You could see if startup in SafeBoot allows you access past that the Completer.
Since I don't have a pile of helpful article links on how to resolve various issues
I'd be looking them up one way or another.
There are some helpful items in the site http://thesafemac.com - see Tech Guides
listed (adware, malware, & performance) plus a link to the adwaremedic page.
Also, Apple support has a helpful page on how to remove adware and other bits:
•Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
Hopefully this helps somewhat.
Good luck & happy computing! -
When trying to update my version of iTunes on my PC with Windows 7, I receive the error message "The older version of iTunes cannot be romoved". How do I correct this problem without losing all the music that I have in iTunes on my PC?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I cannot get a dvd to play on my computer. The error message says in iDVD is "media type not supported".
The DVD was produced with a video camera and is in HD format. I think the the format is .m2ts?
Any ideas on how to get this to play?Check out > Mac App Store - Free MTS M2TS Converter
and/or others at > playing .m2ts format in OS X - Google Search -
how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"
It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.
-
Some of the songs I have downloaded into i tunes won't play when I select it to do so. The error message I get is "The song can not be used because the original file can not be found. Would you like to locate it?" When I select yes I'm sent to a screen that has my i tunes library listed. When I select the song in question I'm asked if I would like to open the song. When I select this option I get nothing. The songs I have downloaded must be somewhere because they are listed in my i tunes library and on the screen I've been sent to. I can't the songs to play however. This is not true of all of my songs but it is true of quite a few of them. Actually, one song is too many. How do I get my music to play that seems to be locked up somewhere in the computer?
Presuming they're on your computer, right click on them and then follow the prompts to locate hte file on your computer.
-
I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version. How do I update my PHONE and why is an itunes update being confused for my iphone?
You need iTunes 10.0 or greater to update your phone...iTunes isn't confused at all. If you're on a Mac, you'll need OS X 10.5.8 or greater to update iTunes to 10.0 or greater.
Maybe you are looking for
-
How to create a value sets for concurrent program?
Hi Friends, I am creating a concurrent program with a parameter period... In the value set for the parameter period, I am using the following query : ---where application_id = 101 and set_of_books_id = :$PROFILES$.gl_set_of_bks_id and closing_status
-
Xsl variable error not explained in earlier thread
Steve, Thank you so much for your response to my earlier thread, it is difficult to focus on what I am supposed to be doing today, with all the sad news from the east coast. Re-visiting this variable issue one more time to try understand what is goin
-
10.6.2 update breaks Shared Scanning (Samsung SCX-4500)
Since installing 10.6.2 on both Mac Mini and MacBook Pro, I can no longer use Shared Scanning. Setup: Mac Mini Core Duo running 10.6.2 sharing Samsung SCX-4500 multifunction device. MacBook Pro 3,1 running 10.6.2 running Image Capture as a client of
-
Scanning to computer from HP Office jet 6600
I have a Mac OS X 10.9.4. It will not allow me to scan to my computer. I get a notice that Scan to computer cannot be enabled. I have tried downloading from HP, and still no luck. Any ideas or instructions on what I can do?
-
How to prevent the direct execution of a Z T.Code
Hello Friends, The scenario is like this : I am going to create an Z T.Code. I have to block this T.Code from direct execution(means executing it directly by calling from Command Field). But I must be able to execute the same T.Code from within a pro