Recurring Documents run schdule configuration

Dear all,
I have a question regarding the recurring document run schdule configuration. my example is below
I received an insurance policy,
Period :23.02.2011 - 23.05.2011 (for 3 months)
amount: 15.000 USD
First I posted this policy to vendor account
31 vendor ABC                   15.000 USD
40 Prepaid Exp.acc.            15.000 USD
secondly I create a recurring document with below specification.
*Recuring entry run*
company code:1000
first run on :23.02.2011
Last run on:23.05.2011
interval months:1
run date:23
transfer amounts in local currency
copy texts
*Document header information*
document type:AB
currency/rate:USD
translation date:23.02.2011
Post. key:40 (insurance exp.account) enter amount (for monthly 5.000 USD)
Post. key:50 (Prepaid exp. account) enter amount (for monthly 5.000 USD)
and than ı execute document posting by F.14 and the document posted.
but I want to create a recurring document and posted this document according to the below calculation,
for february 2011= 1000,00 USD (15.000 USD / 90 days X 6 day)
for march 2011   = 5.166,67 USD (31 day)
for april 2011     = 5.000,00 USD (30 day)
for may 2011    = 3.833,33 USD (23 day)
how can I configure this recurring document.
Thank you so much.......

Hi,
For this scenario standard is not possible, why because if the recurring documents are maintained only for which is the amounts and date is fixed for this scenario is possibe for recurring document, then discuss with the abaper try to maintain userexits for this.
Regards,
Kanike

Similar Messages

  • Background scheduling of recurring document postings

    Hi Freinds,
    I have 3 recurring entries every month, Lets say 1 should rum on 1st of everymonth, 2nd one should run on 4th of every month and 3rd entry on 10th. I hve created 3 recurring docs in FBD1.
    Instead of go ro F.14 and create batch job every month. I would like to scehdule a background job for the whole fiscal year. So that every month all 3 docs automatically gets posted.
    Anyone give me step by step process of scheduling background job.
    thanks in advance..
      Venkat

    hi
    kindly note the steps below:
    1)     Create a recurring document giving the start date and end date, directing the system to post the entries at the end of a period (monthly, bi-monthly, quarterly, semi annually, annually, etc).
    2)     Determinants would be the transaction should recur regularly and have the same values across the horizon of recurrence. Again the posting period in which the entry can be posted should be open.
    3)     Post the entries as on a particular posting date by running a batch process for all the recurring document templates created.
    Create Recurring entries document template u2013 FBD1
    Execute Recurring entry program u2013 F.14
    Recurring entries list u2013 F.15
    regards
    eashwar

  • Recurring Documents Error

    Dear Friends:
    Uisng T.code F.14, Creating posting Documents from Recurring Documents, I entered data for Co.Code,Doc.No,F.Year,
    and settlement period as 01.01.2007 to 31.01.2007.
    User name:XXXX.
    I am getting the error as mentioned below.
    Session 2000_RENT was not created
    Message no. FB202
    Diagnosis
    You have started the report SAPF120.
    System response
    No recurring document could be selected which would have corresponded to the selection criteria you specified.
    The session 2000_RENT was therefore not created.
    Procedure
    Check your entry or change your existing selection criteria.
    How to overcoem the problem.Please advise.
    Regards
    MSReddy

    Hi,
    U r getting error when ur executing jobs.
    here u r running recurring documents through f.14
    first go and check FB03(recurring document diosplay)for what is u r recurring document executing date.
    And also go and check f.15 for next recurring document entry data. from that u can run f.14. now u r jobs will generate.
    Here recurring document means reaccuring documents this is for regular payments Ex: rent or insurance payments .So at the time of recurring document creation they will mention the first run date and last run date .
    So if this is first run means u have to mention first run date. otherwise go and check the f.15 there we can get next run date.
    So u mention that date and run the transaction f.14.

  • Deleting a recurring document

    I have a recurring document created in the year 2005 which expires in 2008. However, I want to delete this now. I tried it with the Tcode F.56 in the Test Run mode, but it doesnt pick this document up! I read the info on this transaction adn it says, only documents that have the Deletion flag in the Header can be pciked. Where do I check this deletion flag or simply put, how do I delete this document?
    Thanks,
    Tejas

    Hi Tejas...
    You can only delete recurring entry documents that are flagged for deletion. The recurring entry program automatically flags recurring entry documents for deletion if the next run date determined by the program is after the last scheduled run date. The system thereby indicates that the recurring entry document is not to be used again. You can also set the deletion flag yourself in the recurring entry document.
    When you use a run schedule, the program flags a recurring document for deletion if there is no run date in the schedule which is later than the current run date. In this case the program tells you which recurring document has been flagged for deletion. You can remove the deletion indicator from the document if necessary. This may be the case for example, if you have not yet entered all run dates. Make sure you then complete the run schedule.
    Recurring entry documents which are marked for deletion are no longer used by the recurring entry program.
    And the procedure will be as follow....
    To delete recurring entry documents, proceed as follows:
    Select Document -
    > Reference documents -
    > Recurring document ---> Delete from the General Ledger menu.
    Enter the program specifications.
    If required, you can carry out a test run to give you a list of the documents which can be deleted. You can also print the resulting list. Select the Test run field.
    Once you are sure that you want to delete the selected recurring entry documents, deselect the Test run field.
    Select Program -
    > Execute.
    If u satisfied, assing me points...
    Tahnk you
    Dasharathi

  • Dynamic Text for Recurring Documents

    Hello all,
    I want to know how to use dynamic texts for Document Header field in recurring documents.
    We run the recurring program each month (F.14). I would like the document header text to have the dates of that month eg "01/06/08 - 30/06/08". If we hard code this in, each month we need to go into the recurring template and change the dates for the appropriate month - this defeats the purpose of having recurring documents.
    Any help would be greatly appreciated.
    Thanks,
    Belinda

    hi Belinda,
    Welcome to SDN
    I think this could be done with a substitution exit. Prerequisite will be the recurring document number and if that matches, the text has to be built up acc. to the current periods. It requires some coding, but I believe it is makable.
    hope this helps
    ec

  • Recurring document posting clarification

    Hi,
    Recurring document can be posted by giving co code, doc no, Fis year and settlement period and at the same time what is the need for entering details in General selections tab ie doc type, posting date, entry date etc.
    please clarify clearly what is the difference between posting with general selection details and without the same.
    Thanks in advance,
    Regards,
    Deva

    Dear,
    It is well enough to run with document number and no need to enter other selection as long as you give the document number becuase it is unique.
    Your concern belongs to technical veiw that why to use general selection. SAP provide this general selection to filter your search or in short it is basically to speed up the process.
    For e.g You have entered company code and fiscal year but not the document number because they are not in chronological order so you will use to general selection like Document Type. You are sure that you want to execute recurring entry with document type AB so syste will look up into company code, fiscal year and document type and give you the results quicker than not using the document type in general selection
    Regards,
    Chintan Joshi

  • Post a recurring document F.14

    Hi,
    I am trying to post a recurring document but it's not creating the batch session if I enter the 'Run Schedule'. Can anyone give me an idea on what's the importance of run schedule,why we need that and what will happen if I don't enter anything in that field? Quite unclear with the description provided by F1.
    All answers will be duly rewarded points
    Thanks,
    N

    Hello recurring entries are used for entires that occur peridically - weekly , monthly etc.
    You define a run schedule in OBC1, eg  the runschedule name is Week( weekly payments)
    Then in Obc2 you define the run dates for this. eg 6/5/07 6/12/07 and so on.
    When you create a recurring entry document in FBD1, you define a run schedule for it. eg Week. You define the first run on date and the last run on date.
    You may have to pay your rent, salaries. mortage etc etc, every week
    so when the time comes of posting these entries. You go to f.14 and enter the run schedule i.e Week and then in the settlement period you enter the date ( this has to be defined in OBC2)
    Then you will create a batch input session which you can exeucte via Sm35.
    Points will be appreciated
    Regards,
    Zaid Azam

  • Deletion of recurring document

    Hi,
    I tried to delete the recurring document using T. Code F.56. But the document is not getting deleted. I tried to put a deletion flag in FBD2, but i am not able to do so.
    Can you pls help. If possible pls send the screen shots to my mail id [email protected]
    full points assured.
    regards,
    meghna

    hi,
    i have unticked the test run box. the message i got is No Recurring Doc exists. but i can view the doc in FBD3 and also when i run f.14, the doc is getting posted.
    pls advice.
    meghna

  • Recurring document in FBD1

    Hi everybody,
    I have created a recurring document in TC: FBD1 with first run date is 01-08-2009. Now i want the invoice to be posted in 31-07-2009. system is not allowing to post this invoice. How to change this first run date from 01-08-2009 to 31-07-2009. Can anybody help on this...please.....
    And also system should allow the first run date to be flexible to change....can anybody guide me on this....
    Regards

    Hi Krishna,
    Recurring Entry Documents & Sample Documents are like Templates.
    They wont update any g/l's.
    there will be seperate number ranges maintained to these Recurring Entry & Sample Documents.
    Nothing impact will be there if you Delete.
    Regards
    Venkat

  • Help running ./configure script

    Trying to install 3rd party software. Attempting to run ./configure. Terminal keeps saying "No such file or directory." Can anyone provide me a little more info on how to run this script than the reference book I'm using?

    the file name is simpson-1.1.2-macosx-intel.tar
    I notice that the file has no file name beyond .tar Does this mean I still need to decompress it?
    Before I started using Terminal with this file, I (may have) decompressed it just by double clicking on the file. This created a folder and in the folder was a readme document and 3 other folder, one containing documents and the others for the /usr/local/bin and /usr/local/lib directories.
    Here are some of the instuctions given in the INSTALL document (being new to Unix, these instructions arent perfectly clear to me):
    Basic Installation
    ==================
    These are generic installation instructions.
    The `configure' shell script attempts to guess correct values for
    various system-dependent variables used during compilation. It uses
    those values to create a `Makefile' in each directory of the package.
    It may also create one or more `.h' files containing system-dependent
    definitions. Finally, it creates a shell script `config.status' that
    you can run in the future to recreate the current configuration, a file
    `config.cache' that saves the results of its tests to speed up
    reconfiguring, and a file `config.log' containing compiler output
    (useful mainly for debugging `configure').
    If you need to do unusual things to compile the package, please try
    to figure out how `configure' could check whether to do them, and mail
    diffs or instructions to the address given in the `README' so they can
    be considered for the next release. If at some point `config.cache'
    contains results you don't want to keep, you may remove or edit it.
    The file `configure.in' is used to create `configure' by a program
    called `autoconf'. You only need `configure.in' if you want to change
    it or regenerate `configure' using a newer version of `autoconf'.
    The simplest way to compile this package is:
    1. `cd' to the directory containing the package's source code and type
    `./configure' to configure the package for your system. If you're
    using `csh' on an old version of System V, you might need to type
    `sh ./configure' instead to prevent `csh' from trying to execute
    `configure' itself.
    Running `configure' takes awhile. While running, it prints some
    messages telling which features it is checking for.
    2. Type `make' to compile the package. ....

  • Memory error while running DI configuration wizard

    Hi
    We have installed NW 7.0 with DI usage. After Installation, we are running DI configuration Wizard. During step (at 48% ) Assign Role NWDI.XDeveloper to Group NWDI.XDevelopers its giving error:
    Exception Class:java.lang.OutOfMemoryError
    Following is the screen shot of error:
    Assign Role NWDI.XDeveloper to Group NWDI.XDevelopers
    Description
    No specified detailed description
    State
    START_ACTION
    Support Information
    Type of Action
    InvokeServiceDebug Events
    InvokeService:Assign Role NWDI.XDeveloper to Group NWDI.XDevelopers
    Library: sap.com/tclmconfig~content
    SourcePath ./DIStandaloneProcess/DICommonProcess/DIUserConfigProcess/DIAssignRolesToAddtlGroups/DIInvokeAssignRoleToXDevGroup
    Time 2009/02/03 at 23:38:01
    WSDL /content/common/service/usermanagement/assignRoleToGroup.wsdl
    InvokeService- Result: Failed
    Exception Message:null
    Exception Class:java.lang.OutOfMemoryError
    Stacktrace
    Messages at cancel time
    Messages at exception time
    WebDynpro
    <WebDynpro> <loggedInUser>J2EE_ADMIN</loggedInUser> <initial>true</initial> </WebDynpro> 
    Can anybody help me solving this problem
    Thanks in advance

    Read,
    http://help.sap.com/saphelp_nw70/helpdata/en/43/54cdc48d395f6ce10000000a1553f6/frameset.htm
    That should fix your problem
    regards
    Juan

  • Recurring document - FBD1 with incorrect due-date calculation for AP

    Hi Gurus,
    in our ECC 6.0 system we are creating with F.14 FI-documents (SAPF120) based on recurring documents (created with FBD1) for various purposes (e.g. Recurring entries for IC-business).
    Therefore it's important that the system provides in the final processing of the recurring documents the correct net-due-date in the AP-document based on the document date and the payment term included in the AP-masterdata (LFB1-ZTERM).
    Problem:
    The processed FI-document contains the correct payment term but the calculated net-due-date with regards to the document date (BKPF-BLDAT) isn't correct. A Dummy-Update of the FI-document with FB02 on field BSEG-ZTERM provides finally the correct net due date but this a not recommended solution.
    Any ideas how to solve that issue???
    Thanks for replies.
    BR, Bernd

    Hi Vishnu,
    the defined payment term is
    fix day: 15
    additional month: 1.
    Default for baseline date is posting date
    Therefore the expectation is that net due date is calculated for posting date
    e.g. : 01.02.2012 to 15.03.2012.
    The line item after processing in FI-document shows :
    Posting Date : 01.02.2012
    Bline Date:   01.02.2012
    Days/percent: 35
    Net due date: 07.03.2012 (dd.mm.yyyy)
    That's wrong according to my understanding of the payment term definition.
    BR, Bernd

  • File to File Scenario - issue during Running the configuration in ID

    Hi All,
    We are getting following error message during running the configuration in Integration Directory.
    Receiver Determination
    <Not found>
    Internal Error
    HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://XXXXX:8002/sap/xi/simulation?sap-client=111 User: XIUSER
    Can somebody help me on this.
    Thank You,
    Swapnil

    Hi,
    I activated simulation service. But now I am getting error in Interface Mapping. Please see below
    Interface Mapping
    <Not found>
    Runtime error
    com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MMF2F_: Fatal Error: com.sap.engine.lib.xml.parser.Parser~
    <Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>... (163 lines)
    Thanks,
    Swapnil

  • How to run Test Configuration in XI

    Dear all experts,
    I am new in SAP Netweaver and I am trying to get certify my products. Thus, I have some questions and appreciate you can help to clear my doubts below.
    1. I have finished configuration in XI, but when I try to run Test Configuration from the Tools, it show error in Receiver Determination stage. Can anyone help to explain how to perform this test? and what should I put in Payload?
    The error message:
    Receiver Determination
    Internal Error
    HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://pwdf0880.dmzwdf.sap.corp:50080/sap/xi/simulation?sap-client= User: XIDIRUSER
    2. My Scenario is a Web Screen (asp.net) calling and passsing a parameter to XI Server, then XI will execute a BAPI to return some data. Can any expert out there give some sample codes in asp.net that send HTTP Request to XI Server?
    3. What is the use of WSDL in XML format?
    Thanks in advance.
    Best regards.
    Message was edited by: Adam Lee

    Hello Adam,
    You sent this other question (below) to my email box.  I will answer it here so that other people will benefit from it.  To unlock an object which someone has locked, goto homepage of SAP Exchange Infrastructure --> Click on the link at the upper right hand side called "Administration" --> Enter the User name and password (you might not have authorization) to display page --> Select "Lock overview" (left panel) and remove the lock of your selected user. 
    I've gone ahead to remove it for you.
    Also, I did a check on your IS in the Integration Directory called, IS_DISPLAYPO_SUPPLIER, and there was no error.  Did you fix it already?  It looks like you have everything correctly defined in my first pass.  Please let me know if you are still stuck.
    Have you also asked your consultant to look into this?
    Regards,
    John Ta
    From: Adam Lee [mailto:[email protected]]
    Sent: Monday, Oct 09, 2006 12:19 AM
    Subject: RE: Category "SAP NetWeaver - Exchange Infrastructure " has been updated by Adam Lee
    Dear John Ta,
    Thank you for your kindness and willing to help.
    I have sent out contract for the certification. Tuhin is the assigned
    consultant to us.
    By the way, I have one more question here hoping you able to help me. I
    would like to delete an object in XI, but it show an error "Object Data Type
    DT_PO_RESP | http://ep-net.com/xi/eProcurement/scm/40 currently being edited
    by user EPASIA"
    It seems that this object is being locked as I do not have any screen
    editing this object. Appreciate if you can guide me how to unlock this
    object and delete it?
    Thank you.
    Best regards,
    Adam Lee.

  • Message (on one account) when logging in: The user account running the Configuration Manager console has insufficient permissions to read information from the Configuration Manager site database.

    After installing the reportservice/database i cannot use the Configuration Manager Console 2012 anymore with my own AD account. (The accounts of my colleagues are stil working)
    When i login i get the following message:
    The user account running the Configuration Manager console has insufficient permissions to read information from the Configuration Manager site database. The account must belong to a security role in Configuration Manager. The account must also have
    the Windows Server Distributed Component Object Model (DCOM) Remote Activation permission for the computer running the Configuration Manager site server and the SMS Provider.
    I checked the following:
    I am a administrative user in SCCM (Full Administrator)
    I am a member of the administrator group on the server
    Deleted HKEY_CURRENT_USER\Software\Microsoft\ConfigMgr10
    I tried to start it on multiple workstations and deleted my roaming profile
    Any more suggestions?

    Hi,
    Maybe you could have a look on the below blog.
    http://blog.nimbo.com/how-to-disable-user-account-control-in-windows-server-2012/
    (Note: Microsoft provides third-party contact information to help you find technical support. This contact information
    may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for

  • The iTunes Library.itl file is locked

    I have read many, many postings on this issue, but can't seem to find a resolution that works for me. The problem occurs whenever iTunes is forced to close unexpectedly. Upon attempting to reopen iTunes, I get the following error message: "The iTunes

  • Adding NFS Share to Mountain Lion Server

    Alright, here goes. The company I work for has been using SL server for years and wanted to test a possible upgrade to ML server for NFSv4. Downloaded ML to test machine and ML server. I mounted it via server connector (nfs://blah blah..you get the i

  • Can't install latest Flash player 10.1 for Opera 10.53

    Hi all Having a weird problem installing Flash Player 10.1.53.64. Flash is only installed partially, differently from earlier versions. OS: Windows XP SP 3 (32bit) Browser: Opera 10.53 old Flash player version: 10.0.45.2 I tried updating my Flash pla

  • Exchange - reply and forward arrow symbols not showing in Outlook

    I have a hosted Exchange 2007 account and I am running iOS 6.1.3 on an iPhone 4S.  When I reply to an e-mail, a grey reply arrow shows up on my iPhone.  However, in Outlook, there is no reply arrow.  There should be a little purple reply arrow.  And

  • Temp file save location

    1st Why is Itunes creating so many temp files? 2nd Can I change where Itunes saves these file? They are saving on "my music" folder which is part of our server, wasting valuable space. If I have to have these files I would like to save them to my C: