Recurring inspection date -how to update

Hi experts,
I am doing recurring inspection of a batch B1 of material X with inspection interval=4 days which has been manufactured on 17.09.2014 and its next inspection date is 21.09.2014 if we see in MSC2N.
In QM07 i am putting "initial days =4" and a lot is formed. I did UD of that lot and cleared.
Now my question is how will my batch update with next inspection date as 21+4=25.09.2014 or i have to do it manually.How can i fullfill requirement of recurring inspection of batch will lot formation on interval of 4 days?

Hi Amit,
You need to schedule background job using transaction QA05 using variant.
If the background job is scheduled daily, the system creates inspection lots as per the control parameters in the variant.
1. Lot Creation only: The system creates inspection lots for the selected batches when the next inspection date is within the opening period automatically as per your indicator set on the initial screen.
2. To inspection stock at lot creation: The system creates inspection lots for the selected batches when the next inspection date is within the opening period. When the inspection lots are created, it posts the batch stock to inspection stock. If an inspection lot already exists, the stocks are also posted to inspection stock and the inspection lot is updated accordingly.
3. Block batch at lot creation: The system creates inspection lots for the selected batches and blocks the batches by changing their status to "restricted." If the batch status management function is not active, the stock is posted to blocked stock.
4. To inspection stock at inspection date: The system posts the batch stock to inspection stock when the next inspection date is reached. If an inspection lot already exists, the system updates the existing inspection lot. If a lot does not exist, the system creates one.
5. Block batch at inspection date: The system blocks the batch when the next inspection date is reached. If the batch status management function is not active in your plant, the stock is posted to blocked stock.
Please find screen snap on the initial screen attached.
Regards,
Gururaj Kulkarni

Similar Messages

Next inspection date is not updated in batch / prposed at the time of UD

Hi
I have configurted the system for retest of batches, the system successfully creates the inspection lot but when does not propose next inspection date at the time of UD nor it updates in Batch Master.
I entered inspection interval days in QM View, the system entered the first inspection date correctly. Also Batch Restriction is working properly.
Kindly help.
regards
Mobashir

Hi Shaymal & VRMP
I have checked the system, the only problem I am facing is that the system does not show next inspection date dialog box at the time of UD where I can see the next inspection date being set by the system
Say, I use QA07 (Triggered Manually) on 19.jan.08. The Next inspection date was 26.jan.08 and Initial Run in Days was 10 (days), the system created inspection lot on 19.jan.08 successfully. At the time of UD it automatically set 29.jan.08 as the next inspection date (i.e. 19.jan.08 + 10 days) istead of 06. Feb.08 (i.e. 26.jan.08 + 10 days) without showing dialog box / suggesting next inspectino date.
regards
Mobashir
Edited by: Muhammad Mobashir on Jan 19, 2009 7:11 AM

HT4623 Hi, I'd like to download the Spotify app,it needs iOS 6.0 or later, iPod says my software iOS 5.1.1 is up to date, how to update?

Hi, I'd like to download the Spotify app,it needs iOS 6.0 or later, iPod says my software iOS 5.1.1 is up to date, how do I update?

If the app was previously compatible with iOS 5.1.1 then
App Store: Downloading Older Versions of Apps on iOS - Apple Club

Planning Data how to Update

Dear All,
Through which transaction code do I update planned figures so that the same may appear business area wise in the undermentioned reports
S_ALR_87012253 - Annual Plan/Actual Comparison
S_ALR_87012254 - Half-Year Plan/Actual Comparison
S_ALR_87012255 - Quarterly Plan/Actual Comparison
S_ALR_87012256 - Periodic Plan/Actual Comparison
We are using ECC 5.0 version of SAP R3 , also pls guide if there is any configuration settings for the same.
Regards
Milind Nair

Dear All,
Pls provide some inputs on this as its urgent.
Regards
Milind Nair

HT4623 how to update Ipad

my IPad said: "iOS 5.1.1 your software is up to date" how to update it to 6 so i can update my apps?

What generation iPad is it ? If it's a first gen iPad then iOS 5.1.1 is the highest version that it supports, you can't install iOS 6+ on it.

Master data changes not updated in Inspection Plan- QP01

Hi
We created all the QM master data . After that we did some changes in inspection chars and in the sampling master data.but the values are not reflecting in the Inspection plan . How to update the changes in the inspection plan. We are trying to find indIvidual as well as Mass update
Any input will he highly appreciated
Thanks
JJ

Dear JJ
Another easy method will be maintaining MIC as referenced mic. instead of maintaining it as complete copy model you can make it referenced. any changes in the mic can be updated automaticalyin the inspection plan using the referenced functionality.
The issue being wherever the mic goes will be changed,
Regards
gajesh

Recurring inspection for a batch with early date

Dear Gurus,
I have a batch with retest date 31.07.2010
I need to create the inspection lot of recurring inspection for this batch today.
I use transaction QA07, but this will not work for days earlier than today.
I tried to create the lot manually, the lot was created but the quantity was not transferred to the Quality inspection and remained unrestricted.
I need to create the lot and transfer the quantity to quality inspection....how can I handle this case?
Regards,
MaX

Well, nothing is unacceptable. It's just that it needs a lot of documentation. You don't change the date and leave it. You change the date, manually run QA07 to create the 09 inspection and immediately change the date back again. With proper documentation and approval from the QA department this shouldn't be an issue. I am assuming this is a one time thing. It's not like you are advocating a new business process.
The batch record should already be self documenting already and show a record of all changes. While the FDA would frown on this being a regular business practice, if it is something that happens once and the proper paperwork is done. It shouldn't be an issue. It would however cause an auditor to probably ask what caused this in the first place, what was the corrective action applied to prevent it from happening again, how many times has this happened and is it expected to happen in the future. If all of that can be answered, there shouldn't be any issue.
FF

How to update link and import data of relocated incx file into inca file?

Subject : how to update link and import data of relocated incx file into inca file.? The incx file was originally part of the inca file and it has been relocated. ------------------- Hello All, I am working on InDesignCS2 and InCopyCS2. From indesign I am creating an assignment file as well as incopy files.(.inca and .incx file created through exporing). Now indesign hardcodes the path of the incx files in inca file.So if I put the incx files in different folder then after opening the inca file in InCopy , I am getting the alert stating that " The document doesn't consists of any incopy story" and all the linked story will flag a red question mark icon. So I tried to recreate and update the links. Below is my code for that //code start***************************** //creating kDataLinkHelperBoss InterfacePtr<IDataLinkHelper> dataLinkHelper(static_cast<IDataLinkHelper*> (CreateObject2<IDataLinkHelper>(kDataLinkHelperBoss))); /** The newFileToBeLinkedPath is the path of the incx file which is relocated. And it was previously part of the inca file. eg. earlier it was c:\\test.incx now it is d:\\test.incx */ IDFile newIDFileToBeLinked(newFileToBeLinkedPath); //create the datelink IDataLink * dlk = dataLinkHelper->CreateDataLink(newIDFileToBeLinked); NameInfo name; PMString type; uint32 fileType; dlk->GetNameInfo(&name,&type,&fileType); //relink the story InterfacePtr<ICommand> relinkCmd(CmdUtils::CreateCommand(kRestoreLinkCmdBoss)); InterfacePtr<IRestoreLinkCmdData> relinkCmdData(relinkCmd, IID_IRESTORELINKCMDDATA); relinkCmdData->Set(database, dataLinkUID, &name, &type, fileType, IDataLink::kLinkNormal); ErrorCode err = CmdUtils::ProcessCommand(relinkCmd); //Update the link now InterfacePtr<IUpdateLink> updateLink(dataLinkHelper, UseDefaultIID()); UID newLinkUID; err = updateLink->DoUpdateLink(dl, &newLinkUID, kFullUI); //code end********************* I am able to create the proper link.But the data which is there in the incx file is not getting imported in the linked story.But if I modify the newlinked story from the inca file,the incx file will be getting update.(all its previous content will be deleted.) I tried using Utils<IInCopyWorkflow>()->ImportStory() ,But its import the incx file in xml format. What is the solution of this then? Kindly help me as I am terribly stuck since last few days. Thanks and Regards, Yopangjo

>
I can say that anybody with
no experience could easily do an export/import in
MSSQLServer 2000.
Anybody with no experience should not mess up my Oracle Databases !

In Pages 5, how to get date to automatically update upon opening a template?

I'm using Pages 5.2. In prior versions of Appleworks and Pages I was able to construct and save a template in which the date would automatically update to the current date when the template was opened. I have tried "Insert Date" and I can click on that to update to current date, but I don't always remember to do that and therefore, some of my documents are dated several months prior.
Can't seem to find how to do it under Pages 5.2 Anyone have help or a work around?

I have the same problem.
What confuses me is that all the apple provided templates in pages seem to auto update their time and date upon opening.
So there MUST be a way to do it... although I've been unable to work out how...
Amnon

How to update ADF VO object to refresh the data in ADF Pivot table

I need to know how to update the View object so that the date in pivot table is refreshed/updated/filtered.
here are the steps I performed to create ADF pivot table application using VO at design time.
1) created a collection in a Data Control (ViewObject in an ApplicationModule) that provides the values I wanted to use for row and column labels as well the cell values (Used the SQL query)
2) Dragged this collection to the page in which wanted to create the pivot table
3) In the pivot table data binding editor specified the characteristics of the rows (which attribute(s) should be displayed in header), the columns (likewise) and the cells.
Now, I have a requirement to update/filter the data in pivot table on click of check box and my question is how to I update the View object so that the date in pivot table is refreshed/updated/filtered.
I have got this solution from one of the contact in which a WHERE clause on an underlying VO is updated based upon input from a Slider control. In essence, the value of the control is sent to a backing bean, and then the backing bean uses this input to call the "filterVO" method on the corresponding AppModule:
but, I'm getting "operationBinding" object as NULL in following code. Please let me know what's wrong.
here is the code
Our slider component will look like
<af:selectBooleanCheckbox label="Unit" value="#{PivotTableBean.dataValue}"
autoSubmit="true" />
The setDataValue() method in the backing bean will get a handle to AM and will execute the "filterVO" method in that, which takes the NumberRange as the input parameter.
public void setDataValue(boolean value) {
DataValue = value;
BindingContainer bindings = getBindings();
OperationBinding operationBinding = (OperationBinding)bindings.getOperationBinding("filterVO");
Object result = operationBinding.execute();
The filterVO method in the AMImpl.java will get the true or false and set the where Clause for the VO query to show values.
public void filterVO(boolean value) {
if (value != null) {
ViewObjectImpl ibVO = getVO1();
ibVO.setWhereClause("PRODUCT_TOTAL_REVENUE(+) where rownum < 10");
ibVO.executeQuery();
}

Did you define a filterVO action in your pagedef.xml file?
You might want to read on how to access service method from a JSF Web Application in the ADF Developer Guide for 10.1.3 chapter 8.5

My calendar on my iPhone 4 erases all data over a month old except for recurring events. How Do I get it to keep the info and not erase calendar events?

My calendar on my iPhone 4 erases all data over a month old except for recurring events. How Do I get it to keep the info and not erase calendar events?

Settings>Mail, Contacts, Calendars>Calendars>Sync>All Events.
Note: If you're using a work Exchange account, the administrator my have restricted your options for this setting.

My performance is very slow when I run graphs. How do I increase the speed at which I can do other things while the data is being updated and displayed on the graphs?

I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?

On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
>My performance is very slow when I run graphs. How do I increase the
>speed at which I can do other things while the data is being updated
>and displayed on the graphs?
>
>I am doing an an aquisition and displaying the data on graphs. When I
>run the program it is slow. I think because I have the number of
>scans to read associated with my scan rate. It takes the number of
>seconds I want to display on the chart times the scan rate and feeds
>that into the number of samples to read at a time from the AI read.
>The problem is that it stalls until the data points are aquired and
>displayed so I cannot click or change values on the front panel until
>the updates occur on the graph. What can I do to be a
ble to help
>this?
It may also be your graphics card. LabVIEW can max the CPU and you
screen may not be refreshing very fast.
--Ray
"There are very few problems that cannot be solved by
orders ending with 'or die.' " -Alistair J.R Young

How to Update data in ZMMPOAMEND

Hi all,
Here in my client place, we r doing Bank Project. In that Project we are maintaining Forward Contract No. Rate, Date in one T.Code of TX01 with the assignment of Purchase Order No. & its referenece No. It should be updated in above mentioned table of ZMMPOAMEND. But it is not updating in that table.
How to update in that table? Anybody known plase let me know..........

Hi,
This table is a user-developed (Z-table) entity. Therefore, the update of this table is performed via some development your ABAP team created. You have to ask your ABAP team to help you with this.
Regards,
Eli

HT4972 I am unable to download apps because my iOs is not up to date. No update shows up in my General settings, how do I update my iPad?

I am unable to download apps because my iOs is not up to date. No update shows up in my General settings, how do I update my iPad?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 4: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you are updating using wifi, locate your iPad close to your router so you don't get a wifi dropout (can cause update corruption).
 Cheers, Tom

How to update the data in sqlserver table using procedure in biztalkserver

Hi,
Please can any one answer this below question
how to update the data in sqlserver table using procedure in biztalkserver
while am using executescalar,typedprocedure getting some warning
Warning:The adapter failed to transmit message going to send port "SendtoSql1" with URL "mssql://nal126//MU_Stage2?". It will be retransmitted after the retry interval specified for this Send Port. Details
Please send me asap....
Thanks...

Hi Messip,
A detailed error would have helped us to answer you more appropriately but
You can follow the post which has step by step instructions, to understand how to use Stored Procedure:
http://tech-findings.blogspot.in/2013/07/insert-records-in-sql-server-using-wcf.html
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
2013: Inserting RawXML (Whole Incoming XML Message) in SQL database

Recurring inspection date -how to update

Similar Messages

Maybe you are looking for