Recurring inspection for blocked stock

Hi all
I am trying to create an inspection lot for recurring inspection for my material. Now the stock for this material is currently blocked. What I want to know is if its possible to have blocked stock moved into quality inspection for recurring inspection.
Regards
Obie

Hi Obie,
I am not sure but it may not be feasible to move the batch stock from block stock to quality inspection with recurring inspection. As I checked in OMJJ, I did not find QA07 transaction code as allowable for 349 movement.
On the contrary, once the batch reaches to its expiry, stock can be posted to QI or block from unrestricted.
I would suggest to use 08 inspection type for transferring material from block to quality inspection.
Regards,
Anand Rao

Similar Messages

  • Recurring inspection and blocked stock

    Hi
    - I have activated inspection type 09
    - Batch management is active
    - Next inspection interval is maintained in material master
    - Inspection lots are generated in QA07
    - Batch stock is moved to blocked stock
    Issue:
    When I record the usage decision I want the batch stock to be automatically transferred from blocked stock to unrestricted stock.
    How is this achievable?
    I have searched for function module but I am not sure whether this is correct?
    Please advise!
    Eva Ahrens

    Hi Amol,
    the inspection lot quantity is moved to blocked stock.
    If I run the process with move to QI stock, then the stock posting is working with transfer of inspection lot quantity from QI stock to unrestricted stock.
    The strange thing is also that when using blocked stock during the inspection there is no tab page for stock quantities in the inspection lot.
    But then it seems strange that this option exist - I seem to remember when testing appr. 10 years ago that it was working - perhaps a function module needs to be assigned to the usage decision code? I have looked but not found any suitable one yet.
    I appreciate your help!
    Eva

  • Transfer posting from material to material ( for blocked stock)

    Dear All,
    Whether transfer posting from material to material can be done for blocked stock also? because through 309 movement type i did not find any option, so let me know if there is any option
    Regards,
    Balakrishna R.V

    Dear
    Transfer posting of material can't be done if material is in Block Stock.
    When block stock is inspected in quality test in inquality inspection stock then it goes to Unrestricted use stock.
    finally Transfer posting is possible for unrestricted use stock material.

  • Clear difference for blocked stock in LI21

    Hi Gurus,
    I try to clear difference for blocked stock in LI21, an error will show up saying 'reason for movement xxxx not supported ' but  in OMBS, reasons for movement type 711 and 712 are maintained correctly.
    also , for unrestricted use stock, clearing difference can be performed well. do you know what's the problem . thank you in advance!
    BR,
    Dragsky

    Dragsky
    Hi
    Firstly 711 and 712 are not 'reasons for movements' they are Movement types and they are used to write 0ff (711) and write on (712) stock via a stock count (physical inventory)
    In the configuration in
    Logistics Execution > Warehouse Management > Activities > Physical Inventory > Clear differences (Interface to Inventory Management) and then select the top one - MM-IM Movement types for clearing inventory.
    Yoe will see in the SAP standard that 711 and 712 are for unrestricted stock
    You need to copy the rest for your warehouse with Category Q, R and S which are different movement types (713 to 718)
    This means that you can clearBlocked stock with movement types 717 and 718.
    I hope that this helps
    Frenchy

  • Recurring inspection for a batch with early date

    Dear Gurus,
    I have a batch with retest date 31.07.2010
    I need to create the inspection lot of recurring inspection for this batch today.
    I use transaction QA07, but this will not work for days earlier than today.
    I tried to create the lot manually, the lot was created but the quantity was not transferred to the Quality inspection and remained unrestricted.
    I need to create the lot and transfer the quantity to quality inspection....how can I handle this case?
    Regards,
    MaX

    Well,  nothing is unacceptable. It's just that it needs a lot of documentation.  You don't change the date and leave it.  You change the date, manually run QA07 to create the 09 inspection and immediately change the date back again.  With proper documentation and approval from the QA department this shouldn't be an issue.  I am assuming this is a one time thing.  It's not like you are advocating a new business process. 
    The batch record should already be self documenting already and show a record of all changes.  While the FDA would frown on this being a regular business practice, if it is something that happens once and the proper paperwork is done. It shouldn't be an issue. It would however cause an auditor to probably ask what caused this in the first place, what was the corrective action applied to prevent it from happening again, how many times has this happened and is it expected to happen in the future. If all of that can be answered, there shouldn't be any issue.
    FF

  • Stock in transit for Block stock

    Kindly suggest on scenario below here with.
    As like stock in transit can be seen through Mov. type 313,303 for un resticted stock. Can we see the stock in transit for Block stock. If so how.?
    Thanks & Regards
    Sudhansu

    Hi,
    In the two-step process,  Inventory Management function isonly used.
    Issuing plant
    MB1B --> Movement type - 303
                  Issuing plant & Storage location ---> Enter the receiving plant and storage location and quantity.
    Receiving plat
    MB1B --> movement tyoe- 305
             Enter the receiving plant and storage location. The material and quantity received.
    The above process can be replicated using the TCode MIGO
    Step 1 : Remove from Storage  -- Other --Movement Type 303 Enter the From and Destination plant in the Transfer posting tab.
    Step 2: Place in Storage -- Other/ Material Document (generated at the time of issue) movement tyoe- 305
                Enter the material and quantity received.
              Placement in Storage is only made in the unrestricted stock.
    Possible reasons for carrying out the a stock transfer in two steps are:
    a)  The plants are located at quite a distance from each other and the goods are in transit for a prolonged period of time;
    b)  there is one employee responsible at each plant, and each can only post movements for his/her own plant.
    hope you understand.
    regards,
    bijoy kumar

  • Able to post Invoice for Blocked stock from quality

    Hi
    I did GR for material against PO for 50 pcs, During QA32 stock posting i posted 30 pcs to Unres. stock(101) and 20 pieces to blocked stock(350) storage locations.
    Now when I am trying to  create  MIRO invoice verification, I am getting all the 50 pcs and available to post also for the entire quantity. How the system is allowing me to carryout Invoice verification for the blocked stock 20 pcs also ???
    It should allow me to process the 30 pcs only which are in unres. stock .
    How do I block the blocked stock from getting invoiced ?
    Please help
    Thanks
    Samuel

    Dear Jurgen
    Thanks for the reply,  master does contain the control key, I also have the inpsection set_up for the materials. During PO in delivery tab at item level I am getting stock type as Quality Inspection. During GR, lot is getting generated and we are able to Stock post it using QA11. Every thing works fine till the stock is there in Quality till the run of Txn QA11. But once stock is out of quality we are having the issue for the stock posted to blocked, I can understand MIRO picking up Unrestricted Quantity of the Lot but why it is also picking the quantity posted to blocked stock as we do not want to pay the vendor for this stock quanitity till we clear it.
    Is there any normal config setting to stop it form geting picked during MIRO.
    Thanks

  • Quality check for block stock

    Dear QM experts,
    I want to know which inspection types is suitable for check a material in block stock.
    Here is the case,
    First i used insp type 04 for GR from production. After we got the result that the lot is rejected, then we post the stock into block stock. After that my client want to do quality rechecking with a new inspection lot.
    So, my question is how SAP can support this business process?
    Thanks in advance,
    Helly

    Hi Amol,
    Thanks a lot for ur reply.
    I just wanna make sure.
    If we use 08, is it means that every goods movement will create an inspection lot unless we make a customizing for the movement type with QM not active ?
    Helly

  • MIGO-Mtype-103 batch not crted for blocked stock.in UD want batch

    Dear Friends ,
    GR at Blocked stock non valuated stock u2013
    Batch management is activated.
    1)     Creating PO
    2)     MIGO with M.Type-103 u2013Goods received for PO in to GR blocked stock.
    Stock quantity of material gets updated. But system does not create batch.
    3)     While making user decision(UD) in quality management (QA32) , system asking batch .
    But batch for that material is not created.
    Therefore I am not able to move stock to unrestricted stock. how to overcome this problem.
    Regards,
    Mahesh.

    Hi Mahesh......
    Please check this thread.....
    Re: Split Valuation configuration
    Thanks & Regards,
    Rahul

  • Quality-Invoicing for Blocked stock

    Hi
    I did GR for material against PO for 50 pcs, During QA32 stock posting i posted 30 pcs to Unres. stock(101) and 20 pieces to blocked stock(350) storage locations.
    Now when I am trying to create MIRO invoice verification, I am getting all the 50 pcs and available to post also for the entire quantity. How the system is allowing me to carryout Invoice verification for the blocked stock 20 pcs also ???
    It should allow me to process the 30 pcs only which are in unres. stock .
    How do I block the blocked stock from getting invoiced ?
    Thanks
    Samuel

    Hi,
    Please use the following badi to have a control on this. Please take a help of your ABAP consultant.
    invoice_update
    Method: Change_at_save. Pls Implement the same, This will not allow to do MIRO for materials in blocked stock.
    Hope this will work you.
    Thanks & Regards
    Kundan Kumar

  • Inspection for non stock parts

    Hello guys,
    I have the problem in inspecting the non stock parts. when the prod order has some non stock components attached to it....it generates the PR and I have convert it to PO to buy the non stock part.
    When I receive it....it directly issuing to the prod order as PR generated from Prod order.But I wanted to come to inspection first and then issue to the prod order. and also it is not mandatory that all the non stock parts has to be inspected.they do inspection based by vendor.
    Please note...we do inspection outside of SAP.No quality set up has been maintained.
    how to handle this issue ? pls revert asap.
    Akash.
    Edited by: chidprakash on Jun 10, 2009 3:46 PM

    Option 1:
    Maintain 01 inspection type in material master
    maintain info record with material vendor combination, if inspection not required for vendor then just select "No inspection" option in info record.
    If you don't want to do inspection in SAP then create blank inspection plan, here no need to maintain MIC in plan. SO once system create lot then do UD of lot with stock posting.
    Option 2:
    Maintain 89 inspection type & create manual lot when required.
    For this create blank IP with usage 9.
    Hope this give you some idea.
    Thanks!!!

  • How to see the material document for Blocked stock

    Hello Experts
    I having some blocked stock in plant X , How to see the material document for this stock.
    Thanks in Advance
    Prashanth.v
    Edited by: prashanth.venkategowda on Aug 11, 2010 7:38 PM

    which material documents do you want to see?
    Material documents can be found and displayed in MB51 transaction.
    in MMBE you can put the cursor onto your stock line and then choose from menu Environment > material documents and SAP will list all relevant material documents.
    block stock status is not a selection criteria, material number, plant storage location, batch number are selection criterias.
    if you want only documents to block stock, then you need to select by movement type, e.g. 343 and 344 are movements that change status from unrestricted to blocked or vica versa.

  • Transaction for Blocked stock as on date

    Hi,
    Is there any transaction to get the blocked stock as on a particular date?
    Regards,
    Srinivas

    Hi,
    Please try it in T code MB5B where in you give movement type 103 and selection date and execute.
    REgards
    Ram

  • Vendor Payment for Blocked stock

    Can we have control over vendor payment if stock is partly posted to unrestricted and partly posted to blocked stock?

    As block stock is as good as you have accepted the vendors material so only way is to use
    User exit LMR1M001 |User exits in Logistics Invoice Verification in MIRO-->this will provide additional blocks in MIRO

  • How to identify blocked stock to the concern GR inspection stock

    Dear All,
    my client want to have tracking for blocked stock posted good against the the same GRN. is there is any way or any T-code to indetify the concer related stocks.
    Please provide your valuable solution, it may help me to resolve the issue ...
    Thanks,
    Kirubakaran.S

    hi.. sujit..,
    Thanks for your reply....
    through mb51 how i can track the concern insp.lot material.. bcz there if, u enter the material it's shows the all movement materials if u specify the movement also it shows all releated doc's.. from tht how i can able to find r identify this material document is related to the same lot. is there is any provision plz update me... sorry to asking the whole detail... bcz i'm facing these as a first time tht s y...
    Thanks,
    Kiru.S

Maybe you are looking for