Recurring text error message

Hi, just got a iphone 4 last week and starting to discover all the different features. I have a text problem starting today I can't seem to resolve. My text messaging has been working fine I have to say. Then this morning I sent a text to an international phone number that turn out to be wrong number. First nothing happened. Then 5 hours later I received a reply telling me the phone number is incorrect. Ok, fine. But wait, after that I keep receiving the same exact error message, about every five minute. I went I deleted the original text message by going into edit and removing the whole post. Not so lucky, I still keep receiving the error sms. I am afraid this is going to go on and on, all night and day. Does anyone knows what I can do to make it stop?

Well there is no table available in the oracle to see such. However, for UNIX flavour in the rdbms directory (I guess) you have a flat file called oraus whch contains all ora errors messages. For NT(WINDOWS) system, you need to write a procesure using error code I believe. I had seen this in the asktom site. Search, you may get it.
Jaffar

Similar Messages

  • Picture Text Error Message

    So with recieving some of my picture texts now i am getting an error message that states the following "One or more of the message components have been deleted by MMS Adaptation. Either the message was too large or the components were unsuitable for your handset" is this a carrier issue or a software issue? I am using an iPhone 5 with the 7.1 OS, thanks!

    diesel vdub wrote:
    SMS and MMS are carrier features, contact the carrier to troubleshoot.
    Ok thanks will do...someone told me to try adjusting "mms max messaging size" do you know anything about that?

  • After installing Flash Player on a Mac with Mavericks, I get a long text error message about "Installation error". Can send screen shot if helpful.

    Error message titled "Internal Server Error". Unable to download screen shot, which is a small file, but .tiff.
    Any recommendations on the basis of this very minimal info?
    RPB

    Hello,
    Yes a screenshot will be helpful.  The format needs to be either JPG or PNG to upload to the forums.  You can use the Preview app (How to post a screenshot in the forum) to take the screenshot and save it in JPG or PNG.
    Maria

  • Starting getting text error message 2114 invalid number of digits.Contacted carrier with no response, getting fed up that this problem cannot be resolved, in the middle of maying funeral arrangements and started getting the same message

    Getting this message or a couple of my contacts, which have been texting OK , Have deleted them reentered with 10 digits nothing,
    they can text me but I cannot respond to them - now in the middle of receiving info on a death in the family - started getting the same message, and
    the day before all text's were going through fine. Have contacted carrier no one seems to know how to solve the problem. NOT A HAPPY CAMPER RIGHT NOW!

    First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Text error message in CS3

    Here is another strange error I just got:
    What does this mean? It happened when I hit command-A when editing text. I can type, but just not select all.

    Did you happen to copy text from Illustrator to the clipboard and still have Illustrator open?Try quitting Illustrator.
    Or try Edit > Purge > Clipboard and see if that helps.

  • Creating TextFiled with Error Message inside catch block .

    Hi ,
    I have seen this example from the Adobe :
    Here in this case Assume that an Exception is thrown inside the validate Method and it is caught in the catch Block .
    public function SimpleError()
                 try
                     validate();
                 catch (error:Error)
                     var errorMessage:TextField = new TextField();
                     errorMessage.autoSize = TextFieldAutoSize.LEFT;
                     errorMessage.textColor = 0xFF0000;
                     errorMessage.text = error.message;
                     addChild(errorMessage);
    Now can anybody please let me know to what container this TextFiled is added , and how this catch block can access that Container ??
    Please help me in understanding this .

    Hi,
    That code looks like it was written in a Component or the main Application. The addChild() method will add the TextField to the main app.
    The code also looks like it is from an ActionScript only project, but will work the same in a Flex App (use a Label component instead).
    The catch block is not special, the scope has access to it's containing class, which in this case is a DisplayObjectContainer at the least.
    Mike

  • Error message if invalid characters entered in PM order oper.short text fld

    Hi ALL,
    I need to display a error message, when user enters the invalid characters in work order operation short text field. The error message should be displayed during work order u201CSaveu201D (during creation and change mode).
    Kindly let me know is there is any user exit / BADI can be used for this.
    Note: I have checked some user exit, such as IWO10009 but I am not getting the value of Operation short text (AFVGD-LTXA1) to compare and throw the error message
    Regards
    Ramu

    hi
    the exit is correct but don't use structure field,
    follow this to get text
    get AUFPL(Routing number of operations in the order)from  CAUFV and paa it in AFVC -AUFPLyou get the short text
    it can be usefull
    -ashok

  • I am working in text edit and cannot open my file. Error message says it is in the wrong format, truncated or corrupted. what to do?

    I am working in text edit and cannot open my file. Error message says it is in the wrong format, truncated or corrupted. what to do?

    Try opening Disk Utility in your Applications-Utilities folder and repair permissions.

  • ICal - recurring "server responded with an error" message

    After years of using iCal without problems, (except for some recent duplicate alarms), a recurring error message has suddenly started popping up. It says:
    "The server responded with an error.
    Access to account "***@me.com" is not permitted.
    The server responded:
    "HTTP/1.1 403 Forbidden"
    to operation CalDAVAccountRefreshQueueableOperation."
    I use MobileMe to sync calendars with an iMac, iPhone, iPad and recently added a MacBookPro. I haven't changed anything other than adding the Macbook. MobileMe seems to be syncing just fine. iCal is operating normally, all of the calendars and info are there. I checked iCal > preferences > accounts and the MobileMe account information and password is entered correctly, ...but the error message is constantly popping up. Can someone help me resolve this?
    Thx.

    Are you using MobileMe Calendar Beta?
    First make an iCal backup, File > Export > Archive.
    Remove the following to the trash and restart your computer:
    Home > Library > Caches
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    __NOTE: Removing these files will remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    Once the computer is back up and running open iCal and test.
    Hope that helps.

  • Getting error message "Unable to Share" when trying to send pictures either by text or emai!  Is there something in my security settings that I need to change?

    I am unable to send pictures either by text or email. I will get an error message that states "Unable to Share".  Just purchased the iPhone 6 plus. Never had this issue with the 5.  Is there something that I need to change in my settings?

    I am unable to send pictures either by text or email. I will get an error message that states "Unable to Share".  Just purchased the iPhone 6 plus. Never had this issue with the 5.  Is there something that I need to change in my settings?

  • How to give error message for the screen element text field when wrong i/p

    How to give error message for the screen element text field when wrong i/p
    when wrong input given
    eg. 
    I have a text box with SBOOK-CARRID
    so when user give wrong entry in text box i.e LG
    then I should give some error stating that the the input is invalid or not available ,
    now it showing the error of standard messages,
    i want manual message to be displayed when error comes.
    Thank you,
    Regards,
    Jagrut Bharatkumar Shukla

    Hi all,
    Thank you for your valuable reply,
    but the thing is that its a screen field,
    i.e text box not a selection screen
    i created in screen layout
    with name sbook-carrid
    now i want to get error message display if wrong i/p is given
    thank you.
    Regards,
    Jagrut bharatkumar Shukla,

  • I keep getting this error message as soon as I open Facebook [Textarea Backup] Existing text detected in 'xhpc_message', overwrite with this backup?

    I received an update and the error message went away, I went to load Facebook today and the error message [Textarea Backup] Existing text detected in 'xhpc_message', overwrite with this backup? is back and when you click on cancel or ok...Facebook freezes up

    It is the Page Tweak Add-on... It is what has the Textarea Backup. I removed it and my facebook works fine now.

  • Error message when using the Text Tool

    I have just uninstalled and reinstalled my Copy of Photoshop CS6
    I now find I cannot use the TEXT TOOL - I get the following error message:- Adobe Photoshop CS6 could not complete your request because something prevented the text engine from being initialized.

    I did find that suggestion and I have tried it a couple of times. Now I am going to re-start my PC just incase that clears it
    .........................and it's worked!
    Maybe I didn't do the previous re-set properly but it's now O.K. thanks.
    Happy Christmas

  • Error: "Message short text 26 107 does not exist"

    Hi DS Expert,
    We've upgraded our DS from 3.2 into 4.2.
    But sometimes several jobs fail with error: "Message short text 26 107 does not exist".
    This error does not occur in DS 3.2.
    Please help...
    Thank you.

    Hi,
    Such a message seems to be SAP/BI related.
    check wether you had shortdumps in your connected SAP system.
    In DS there are no "long/medium/short-" texts stored.

  • Text messages on iphone 5s getting error message not delivered

    when attempting to send a text messages on iPhone 5s getting error message not delivered with a red explanation mark. I have filed cases with carrier and it comes back as device, some messages do go thru fine and then it will give the error for several message and then back to working again. Please Help.

    Hi
    I am NOT trying to be mean or patronizing so my apologies if this comes across that way
    That said
    SMS texts are sent on a part of the same carrier wave that carries voice calling and conversation as opposed to data - which is why even non smart phones can text - it is the unused portion of the spectrum that initially carriers were making money off of
    http://computer.howstuffworks.com/e-mail-messaging/sms.htm
    In other words - to be able to text - one has to have a plan that supports that
    Also that is why in some plans international texts have a cost whereas one can merrily iMessage from anywhere in the world and get away with it free
    So - if the texts are not leaving your phone - chances are that they do not have a channel to do that - that is an AT&T issue

Maybe you are looking for