Recursive call of function module 'CRM_ORDER_MAINTAIN'

Hi together,
I have got the follwoing problem.
We have to implement a proof on a partner function regarding the role.
I found the BADI IF_EX_COM_PARTNER_BADI~COM_PARTNER_CHECK
I implement the the follwoing coding:
IF is_partner_wrk-partner_fct = 'ZADI0012'.
    SELECT SINGLE * INTO ls_but100
                    FROM but100
                    WHERE partner = is_partner_wrk-external_partner_number
                    AND   rltyp   = 'BUP004'.
    IF sy-subrc = 4.
      MESSAGE e003(crm_ic_partner) WITH is_partner_wrk-external_partner_number.
    ENDIF.
ENDIF.
when I enter a partner with a wrong role, I got the message I have implemented. Afterwards I type in a partner with the correct role I got a short dump.
Recursive call of function module 'CRM_ORDER_MAINTAIN'
Has anybody an idea how to solve this issue?
Thanks and best regards,
Sylvia

Hi scharfen,
We got the similar requirement what you implemented.I implemented the below code but the error message is coming 3 times.
I have got the follwoing problem.
We have to implement a check on a partner function regarding the role.
I found the BADI IF_EX_COM_PARTNER_BADI~COM_PARTNER_CHECK
I implemented the the follwoing coding:
method IF_EX_COM_PARTNER_BADI~COM_PARTNER_CHECK .
DATA: lw_but100 TYPE but100,
lw_but000 TYPE but000,
lw_msgno TYPE bal_s_idno,
lt_msgno TYPE bal_r_idno,
l_partner TYPE symsgv,
lw_low TYPE balmsgidno.
IF is_partner_wrk-PARTNER_FCT = '00000009'.
SELECT SINGLE * INTO lw_but000
FROM BUT000
WHERE partner = is_partner_wrk-external_partner_number
AND TYPE = '2'.
IF sy-subrc EQ 0.
SELECT SINGLE * INTO lw_but100
FROM but100
WHERE partner = is_partner_wrk-external_partner_number
AND rltyp = 'BUP004'.
IF sy-subrc = 0.
REFRESH lt_msgno.
lw_msgno-sign = 'I'.
lw_msgno-option = 'EQ'.
lw_low-msgid = '/DS1/A'.
lw_low-msgno = '139'.
lw_msgno-low = lw_low.
APPEND lw_msgno TO lt_msgno.
CALL FUNCTION 'CRM_MESSAGES_DELETE'
EXPORTING
IT_R_MSGIDNO = lt_msgno
iv_ref_object = is_partner_wrk-guid.
l_partner = is_partner_wrk-external_partner_number.
CALL FUNCTION 'COM_PARTNER_MESSAGE_COLLECT_OW'
EXPORTING
is_partner_control = is_partner_control
iv_msgno = '139'
iv_msgid = '/DS1/A'
iv_msgty = 'E'
iv_msgv1 = l_partner.
ELSE.
REFRESH lt_msgno.
lw_msgno-sign = 'I'.
lw_msgno-option = 'EQ'.
lw_low-msgid = '/DS1/A'.
lw_low-msgno = '139'.
lw_msgno-low = lw_low.
APPEND lw_msgno TO lt_msgno.
CALL FUNCTION 'CRM_MESSAGES_DELETE'
EXPORTING
IT_R_MSGIDNO = lt_msgno
iv_ref_object = is_partner_wrk-guid.
ENDIF.
ENDIF.
ENDIF.
endmethod.
when I enter a partner with a wrong role, I got the message I have implemented. But the message is appearing 3 times in the errorlog. Can anyone please let me know the reason for this and solution to resolve this.
Regards,
Swetha

Similar Messages

CNTL_ERROR while calling a function module from Java webdynpro

I am calling a RFC function module from javawebdynpro app
which inturn calls a function module performing BDC on CAPP transaction. When I run this from SE37 of the same system or a different system everything works fine. But when called from Java webdynpro app, it raises a CNTL_ERROR exception and creates a short dump.
Any help on this is highly appreciated

Good catch, BI Learner. This was exactly it: when assigning the values from SOURCEFIELDS directly to the import/export parameters, you have to make sure that the types are EXACTLY the same, otherwise it will not work (the routine stops with an error when calling the FM, but there is no dump).
Therefore, to solve my problem, I created the declarations precisely as expected by the FM and assigned the values to these fields:
DATA:
      SOURCEVAL TYPE /BIC/OIINVQTY,
      SOURCEUOM TYPE /BIC/OIUSUOM,
      USITM TYPE /BIC/OIUSITM,
      TARGETUOM TYPE /BIC/OIUSUOM,
      CONVERTED_COST TYPE /BIC/OIINVQTY.
DATA PRODUCTION_UOM TYPE /BIC/OIUSUOM.
" get the Production UOM
    SELECT SINGLE I~/BIC/USPRDUOM
      FROM /BIC/PUSITM AS I
      INTO PRODUCTION_UOM
      WHERE I~/BIC/USITM = SOURCE_FIELDS-/BIC/USITM AND I~OBJVERS = 'A'.
    IF ( SY-SUBRC = 4 ). " no records found
      "RAISE PARTNO_NOT_FOUND.
      RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
    ENDIF.
" load the parameters
    SOURCEVAL = SOURCE_FIELDS-/BIC/USFRZMFC.
    SOURCEUOM = SOURCE_FIELDS-BASE_UOM.
    USITM = SOURCE_FIELDS-/BIC/USITM.
" then you can call the FM
    CALL FUNCTION 'Z_CA_CONVERT_US_COST'
      EXPORTING
        PSOURCEVAL                = SOURCEVAL
        PSOURCEUOM                = SOURCEUOM
        PUSITM                    = USITM
        PTARGETUOM                = PRODUCTION_UOM
      IMPORTING
        PTARGETVAL                = CONVERTED_COST
      EXCEPTIONS
        CONVERSION_NOT_MAINTAINED = 1
        PARTNO_NOT_FOUND          = 2
        OTHERS                    = 3.
" ... [do the rest]
Thanks for your help,
Dennis

Can we call a function module in ADHOC query

Hi
Can we call a function module in ADHOC query if yes how.
Also we ned to know how to call a function module in SAP query.
An early responce is appreciated.
Thanks and best regards
Rajeev

Okay as far as I understand your aim is:
To fill a field in the output list with a value that is based on the current line information and calculated by a function module
So go to SQ02 and create an additional field in the InfoSet.
You can refer in the coding to the technical names you can see in the left tree window like P0000-PERNR.
More information is avaiable in the Help part look for additional field in SQ02.
Regards,
Michael

Upload data from excel with vba by calling a function module

Hello all,
i have a problem with the function module "ALSM_EXCEL_TO_INTERNAL_TABLE". I will call this function module with vba to load data from excel to sap with a Buttonclick. I have copied this function module and set it remotable. But i can´t call it from excel.
Can you give me some tips how can i
upload data from excel with vba by click a button.
The problem seems the function: call method cl_gui_frontend_services=>clipboard_import in the function module, because when i comment this function call the vba-call is true but no results.
How can I call the function module correct with vba?
Thanks a lot for your tips!!!!
Chris
Message was edited by:
        Christoph Kirschner

HI
Uploading data directly from Excel file format
* Upload data direct from excel.xls file to SAP
REPORT ZEXCELUPLOAD.
PARAMETERS: filename LIKE rlgrap-filename MEMORY ID M01,
            begcol TYPE i DEFAULT 1 NO-DISPLAY,
            begrow TYPE i DEFAULT 1 NO-DISPLAY,
            endcol TYPE i DEFAULT 100 NO-DISPLAY,
            endrow TYPE i DEFAULT 32000 NO-DISPLAY.
* Tick don't append header
PARAMETERS: kzheader AS CHECKBOX.
DATA: BEGIN OF intern OCCURS 0.
        INCLUDE STRUCTURE alsmex_tabline.
DATA: END OF intern.
DATA: BEGIN OF intern1 OCCURS 0.
        INCLUDE STRUCTURE alsmex_tabline.
DATA: END OF intern1.
DATA: BEGIN OF t_col OCCURS 0,
       col LIKE alsmex_tabline-col,
       size TYPE i.
DATA: END OF t_col.
DATA: zwlen TYPE i,
      zwlines TYPE i.
DATA: BEGIN OF fieldnames OCCURS 3,
        title(60),
        table(6),
        field(10),
        kz(1),
      END OF fieldnames.
* No of columns
DATA: BEGIN OF data_tab OCCURS 0,
       value_0001(50),
       value_0002(50),
       value_0003(50),
       value_0004(50),
       value_0005(50),
       value_0006(50),
       value_0007(50),
       value_0008(50),
       value_0009(50),
       value_0010(50),
       value_0011(50),
       value_0012(50),
       value_0013(50),
       value_0014(50),
       value_0015(50),
       value_0016(50),
       value_0017(50),
       value_0018(50),
       value_0019(50),
       value_0020(50),
       value_0021(50),
       value_0022(50),
       value_0023(50),
       value_0024(50),
       value_0025(50),
       value_0026(50),
       value_0027(50),
       value_0028(50),
       value_0029(50),
       value_0030(50),
       value_0031(50),
       value_0032(50),
       value_0033(50),
       value_0034(50),
       value_0035(50),
       value_0036(50),
       value_0037(50),
       value_0038(50),
       value_0039(50),
       value_0040(50),
       value_0041(50),
       value_0042(50),
       value_0043(50),
       value_0044(50),
       value_0045(50),
       value_0046(50),
       value_0047(50),
       value_0048(50),
       value_0049(50),
       value_0050(50),
       value_0051(50),
       value_0052(50),
       value_0053(50),
       value_0054(50),
       value_0055(50),
       value_0056(50),
       value_0057(50),
       value_0058(50),
       value_0059(50),
       value_0060(50),
       value_0061(50),
       value_0062(50),
       value_0063(50),
       value_0064(50),
       value_0065(50),
       value_0066(50),
       value_0067(50),
       value_0068(50),
       value_0069(50),
       value_0070(50),
       value_0071(50),
       value_0072(50),
       value_0073(50),
       value_0074(50),
       value_0075(50),
       value_0076(50),
       value_0077(50),
       value_0078(50),
       value_0079(50),
       value_0080(50),
       value_0081(50),
       value_0082(50),
       value_0083(50),
       value_0084(50),
       value_0085(50),
       value_0086(50),
       value_0087(50),
       value_0088(50),
       value_0089(50),
       value_0090(50),
       value_0091(50),
       value_0092(50),
       value_0093(50),
       value_0094(50),
       value_0095(50),
       value_0096(50),
       value_0097(50),
       value_0098(50),
       value_0099(50),
       value_0100(50).
DATA: END OF data_tab.
DATA: tind(4) TYPE n.
DATA: zwfeld(19).
FIELD-SYMBOLS: <fs1>.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR filename.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
       EXPORTING
            mask      = '*.xls'
            static    = 'X'
       CHANGING
            file_name = filename.
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            filename                = filename
            i_begin_col             = begcol
            i_begin_row             = begrow
            i_end_col               = endcol
            i_end_row               = endrow
       TABLES
            intern                  = intern
       EXCEPTIONS
            inconsistent_parameters = 1
            upload_ole              = 2
            OTHERS                  = 3.
IF sy-subrc <> 0.
    WRITE:/ 'Upload Error ', SY-SUBRC.
ENDIF.
END-OF-SELECTION.
LOOP AT intern.
    intern1 = intern.
    CLEAR intern1-row.
    APPEND intern1.
ENDLOOP.
SORT intern1 BY col.
LOOP AT intern1.
    AT NEW col.
      t_col-col = intern1-col.
      APPEND t_col.
    ENDAT.
    zwlen = strlen( intern1-value ).
    READ TABLE t_col WITH KEY col = intern1-col.
    IF sy-subrc EQ 0.
      IF zwlen > t_col-size.
        t_col-size = zwlen.
*                          Internal Table, Current Row Index
        MODIFY t_col INDEX sy-tabix.
      ENDIF.
    ENDIF.
ENDLOOP.
DESCRIBE TABLE t_col LINES zwlines.
SORT intern BY row col.
IF kzheader = 'X'.
    LOOP AT intern.
      fieldnames-title = intern-value.
      APPEND fieldnames.
      AT END OF row.
        EXIT.
      ENDAT.
    ENDLOOP.
ELSE.
    DO zwlines TIMES.
      WRITE sy-index TO fieldnames-title.
      APPEND fieldnames.
    ENDDO.
ENDIF.
SORT intern BY row col.
LOOP AT intern.
    IF kzheader = 'X'
    AND intern-row = 1.
      CONTINUE.
    ENDIF.
    tind = intern-col.
    CONCATENATE 'DATA_TAB-VALUE_' tind INTO zwfeld.
    ASSIGN (zwfeld) TO <fs1>.
    <fs1> = intern-value.
    AT END OF row.
      APPEND data_tab.
      CLEAR data_tab.
    ENDAT.
ENDLOOP.
CALL FUNCTION 'DISPLAY_BASIC_LIST'
       EXPORTING
            file_name     = filename
       TABLES
            data_tab      = data_tab
            fieldname_tab = fieldnames.
*-- End of Program
<b>Excel Upload Alternative - KCD_EXCEL_OLE_TO_INT_CONVERT</b>
*Title : Excel Uploading
TYPES:   BEGIN OF t_datatab,
         col1(25) TYPE c,
         col2(30) TYPE c,
         col3(30) TYPE c,
         col4(30) TYPE c,
         col5(30) TYPE c,
         col6(30) TYPE c,
         col7(30) TYPE c,
         col8(30) TYPE c,
         col9(30) TYPE c,
         col10(30) TYPE c,
         col11(30)    TYPE c,
       END OF t_datatab.
DATA: it_datatab TYPE STANDARD TABLE OF t_datatab INITIAL SIZE 0,
      wa_datatab TYPE t_datatab.
Data : p_table type t_datatab occurs 0 with header line.
DATA : gd_scol   TYPE i VALUE '1',
       gd_srow   TYPE i VALUE '1',
       gd_ecol   TYPE i VALUE '256',
       gd_erow   TYPE i VALUE '65536'.
DATA: it_tab TYPE filetable,
      gd_subrc TYPE i.
field-symbols : <fs>.
*Selection screen definition
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_file LIKE rlgrap-filename
               DEFAULT 'c:test.xls' OBLIGATORY.   " File Name
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
REFRESH: it_tab.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title     = 'Select File'
      default_filename = '*.xls'
      multiselection   = ' '
    CHANGING
      file_table       = it_tab
      rc               = gd_subrc.
LOOP AT it_tab INTO p_file.
*    so_fpath-sign = 'I'.
*    so_fpath-option = 'EQ'.
*    append so_fpath.
ENDLOOP.
START-OF-SELECTION.
PERFORM upload_excel_file TABLES   it_datatab
                             USING   p_file
                                     gd_scol
                                     gd_srow
                                     gd_ecol
                                     gd_erow.
* END-OF-SELECTION.
END-OF-SELECTION.
LOOP AT it_datatab INTO wa_datatab.
    WRITE:/ wa_datatab-col1,
            wa_datatab-col2,
            wa_datatab-col3,
            wa_datatab-col4,
            wa_datatab-col5,
            wa_datatab-col6,
            wa_datatab-col7,
            wa_datatab-col8,
            wa_datatab-col9,
            wa_datatab-col10,
            wa_datatab-col11.
ENDLOOP.
*&      Form UPLOAD_EXCEL_FILE
*       upload excel spreadsheet into internal table
*      -->P_TABLE    Table to return excel data into
*      -->P_FILE     file name and path
*      -->P_SCOL     start column
*      -->P_SROW     start row
*      -->P_ECOL     end column
*      -->P_EROW     end row
FORM upload_excel_file TABLES   p_table
                       USING    p_file
                                p_scol
                                p_srow
                                p_ecol
                                p_erow.
DATA : lt_intern TYPE kcde_cells OCCURS 0 WITH HEADER LINE.
* Has the following format:
*             Row number   | Colum Number   |   Value
*      i.e.     1                 1             Name1
*               2                 1             Joe
DATA : ld_index TYPE i.
* Note: Alternative function module - 'ALSM_EXCEL_TO_INTERNAL_TABLE'
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
    EXPORTING
      filename                = p_file
      i_begin_col             = p_scol
      i_begin_row             = p_srow
      i_end_col               = p_ecol
      i_end_row               = p_erow
    TABLES
      intern                  = LT_INTERN
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      OTHERS                  = 3.
IF sy-subrc <> 0.
    FORMAT COLOR COL_BACKGROUND INTENSIFIED.
    WRITE:/ 'Error Uploading file'.
    EXIT.
ENDIF.
IF lt_intern[] IS INITIAL.
    FORMAT COLOR COL_BACKGROUND INTENSIFIED.
    WRITE:/ 'No Data Uploaded'.
    EXIT.
ELSE.
    SORT lt_intern BY row col.
    LOOP AT lt_intern.
     MOVE lt_intern-col TO ld_index.
     assign component ld_index of structure
     p_table to <fs>.
move : lt_intern-value to <fs>.
*     MOVE lt_intern-value TO p_table.
      AT END OF row.
        APPEND p_table.
        CLEAR p_table.
      ENDAT.
    ENDLOOP.
ENDIF.
ENDFORM.                    "UPLOAD_EXCEL_FILE
Regards
Pavan

How to call a function module from the Web Template?

Hi all,
how can I call a function module from a BI 7.x web template and then show the result of the FM on the web template?
Many thanks for your hints.
Regards, Nils

Hi!
I am too working on a similar issue.
Probably this helps:
Re: Calling a function module from a Web Template
Regards,
Sri

Program making a RFC call to Function Module not working in background

Hi All,
I have an ABAP Program which is used to do a reconciliation check between the R/3 and BI system for Invoice Data. Please find below the details of the program flow:
1.     Program counts the number of records in the DSO table and aggregates the Net_Value based on the date range (passed as parameters)
2.     Program calls a Function Module (RFC Call) which counts the number of records in the R/3 table and aggregates the Net_Value for the same date range
3.     Function Module Passes back the count values and aggregated Net_Value to the program
4.     Program compares the count and aggregated Net_Value from EDWH and MSP systems and sends an email mentioning whether the counts match or not
However we are facing an issue.
Whenever, we execute the program in dialog mode, it works fine and fetches results within 5-6 minutes. However if we schedule the program to run in background (parameters through a variant), it gives no results even after running for over 3-4 hours. We tried figuring it out yesterday but could not come to any conclusion. Since there is a RFC call being to the function module, we were wondering if we need to specify some other parameter as well.
Thanks & Regards
Dharmendra

RFC Call is a procedure for executing remote enables function modules. It is done via the 'Remote Enabled' radio button on the function module's attribute screen.

How to call a function module from a transformation

Hi,
Could somebody please let me know how I can call an abap function module from a transformation (abap xslt program). I know how to call the class methods from transformation, but how do i call a function module..?
Thanks,
Shashi.
Edited by: Shashi Kanth Kasam on Apr 8, 2010 12:45 PM

Ya. I can do that. But I don't want to use a class and a method to call that function module. Want to directly call function module from transformation. Is that possible..?
Thanks,
Shashi

System failure, during call of function module RSWR_RFC_SERVICE_TEST

Hi Team,
     I am working with BW and Portal Integration, with the Netweaver
2004s SP 11 version. I have a issue when i run the RSPOR_SETUP program
to test the configuration.
The error is on status 5 and 12, i get the following error:
System failure, during call of function module RSWR_RFC_SERVICE_TEST,
and when i enter at the dev_jrfc.trc log file, i have the following
error:
Exception thrown [Tue Jul 10 16:12:16,687]:Exception thrown by
application running in JCo Server
java.lang.RuntimeException: call FM RSWR_RFC_SERVICE_TEST to ProgId
smxpedvc_PORTAL_EPD on host smxpedvc.grupoempresarialangeles.com.mx
with SSO not authorized: No login module succeeded.
        at
com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest
(RFCDefaultRequestHandler.java:79)
        at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest
(RFCJCOServer.java:156)
        at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
        at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest
(MiddlewareJRfc.java:2405)
        at com.sap.mw.jco.MiddlewareJRfc$Server.listen
(MiddlewareJRfc.java:1728)
        at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
        at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
        at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
        at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
        at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:100)
        at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:170)
Could you help me to solve this issue.
Thanks so much.

Have you checked the user that is used to connect from J2EE back to ABAP?
I had a similar problem, went into the Visual Administrator and found the incorrect password (or possibly outdated password) was being used to communicate back to ABAP, and updating that sorted out my problem.
Hope this helps.
Cheers,
Andrew

Call of function module "SUBST_START_BATCHJOB" by RFC failed

Hello Guru's,
We have the following Issue:
In Phase PREP_INIT/JOB_RSUPDTEC we get this error from EHPI (Version 710-1)
Checks after phase PREP_INIT/JOB_RSUPDTEC were negative!
Last error code set: BATCHJOB RSUPDTEC FAILED: Calling RSUPDTEC failed - repeat phase.
In the file PSUPDTEC.LOG are the following error:
4 ETQ260 Starting batchjob "RSUPDTEC"
4 ETQ230 Starting RFC Login to: System = "E11", GwHost = "sape11", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="E11", Nr="00", GwHost="sape11", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
4 ETQ399 JOBNAME='RSUPDTEC', REPNAME='RSUPDTEC', VARNAME='', BATCHHOST='sape11', IV_SCHEDEVER=' '
4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
4 ETQ399 Returned JOBCOUNT='14230100'
2EETQ235 Call of function module "SUBST_START_BATCHJOB" by RFC failed (error-status "27")
2EETQ261 Start of batchjob "RSUPDTEC" failed
In the Sysem we can see, that the Job RSUPDTEC was created by DDIC but not started.
We can start (and finish) the job successfully as logged in DDIC.
We don't know whats the problem. The EHPI stopped every time at this point.
Need Help...
regards
Chris

Issue solved.
In /etc/hosts the first entry was SAPE11.
But it must be sape11, because the instance is sape11_E11_00.
In SM51 we could see that
sape11_E11_00 SAPE11 Dialog Batch Update Upd2 Spool Enqueue ICM active
We changed the entry and restarted SAP.
Then the job can be started.

Error when call RFC Function module in R/3

Dear All,
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
we are facing the error "Error while lookup Exception during processing the payload. Error when calling an adapter by using the communication channel CC_PPPI_MES_RFC_Rcvr (Party: , Service: WCD_320, Object ID: 16563889b449328eac76caa6a3bc592e) XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'. Cause Exception: 'com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'."
This is the first time we are doing this configuration.
Could you please let me know what woulbe the reason.

read the original message
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
I am talking about the above Receiver RFC channel which you guys are using to call R/3 from XI. That where you need to change the commit parameter

Type conflict when calling a function module (field length)

Dear All,
            I am getting this following error while executing: Type conflict when calling a function module (field length)
This is piece of coding i have writern in my action button.
method SEARCH_MATERIAL .
data:
        node_mat_input TYPE REF TO if_wd_context_node,
        node_mat_output TYPE REF TO if_wd_context_node,
        material TYPE BAPIMATDET-MATERIAL,
        itab TYPE TABLE OF BAPIMATDOA.
node_mat_input = wd_context->get_child_node( 'NODE_MAT_INPUT' ).
node_mat_output = wd_context->get_child_node( 'NODE_MAT_OUTPUT' ).
node_mat_input->get_attribute( EXPORTING name = 'MATERIAL'
                                 IMPORTING value = material ).
CALL FUNCTION 'BAPI_MATERIAL_GET_DETAIL'
    EXPORTING
      material                    = material
    PLANT                       = plant
    VALUATIONAREA               =
    VALUATIONTYPE               =
    MATERIAL_EVG                =
   IMPORTING
     MATERIAL_GENERAL_DATA       = itab
    RETURN                      =
    MATERIALPLANTDATA           =
    MATERIALVALUATIONDATA       =
node_mat_output->bind_table( itab ).
endmethod.
Attributes are:
Node name = INPUT its structure is BAPIMATDET
INPUT attributes = MATERIAL of type BAPIMATDET-MATERIAL
Thanks,
Gopi.

Hi Amit,
           I have used service call to fetch records from that bapi..
The following is the code generated by service call:-
METHOD execute_bapi_material_get_deta .
declarations for context navigation
DATA:
    node_bapi_material_get_de   TYPE REF TO if_wd_context_node,
     node_exporting   TYPE REF TO if_wd_context_node,
     node_material_general_dat   TYPE REF TO if_wd_context_node,
     node_importing   TYPE REF TO if_wd_context_node,
      lri_element    TYPE REF TO if_wd_context_element.
declarations for fuba parameters
data:
    stru_c_material_general_dat    TYPE if_componentcontroller=>element_material_general_dat.
DATA:
    attr_material    TYPE bapimatdet-material,
    attr_plant    TYPE bapimatall-plant.
get all involved child nodes
node_bapi_material_get_de = wd_context->get_child_node( `BAPI_MATERIAL_GET_DE` ).
node_exporting = node_bapi_material_get_de->get_child_node( `EXPORTING` ).
node_material_general_dat = node_exporting->get_child_node( `MATERIAL_GENERAL_DAT` ).
node_importing = node_bapi_material_get_de->get_child_node( `IMPORTING` ).
get input from context
node_importing->get_attribute(    EXPORTING      name = `MATERIAL`
                                                     IMPORTING      value = attr_material ).
node_importing->get_attribute( EXPORTING       name = `PLANT`
                                                          IMPORTING       value = attr_plant ).
the invocation - errors are always fatal !!!
CALL FUNCTION 'BAPI_MATERIAL_GET_DETAIL'
    EXPORTING
      material =                        attr_material
      plant =                           attr_plant
"      valuationarea =                   wd_This->Valuationarea
"      valuationtype =                   wd_This->Valuationtype
"      material_Evg =                    wd_This->Material_Evg
    IMPORTING
      material_general_data =           stru_c_material_general_dat
"      return =                          wd_This->Return
"      materialplantdata =               wd_This->Materialplantdata
"      materialvaluationdata =           wd_This->Materialvaluationdat
node_material_general_dat->bind_structure( stru_c_material_general_dat[] ).
ENDMETHOD.
                             but the problem is I am getting the following error while compiling...
" stru_c_materialplantdata " is not an internal table - the " OCCOURS n" specification is missing.
Thanks,
Gopi.
Edited by: Yegalaivan on Nov 18, 2009 8:30 AM

ERROR: -Type conflict when calling a function module

hi to all,
when iam executing the program in browser   Type conflict when calling a function module error is showing, i have bind all the attribute correctly still iam getting error, WHEN I CLICK ON THE SEARCH BUTTON DATA IS NOT COMING TO MY TABLE ITAB1 plz help me....
DATA:
      NODE_IP_SELECTION                   TYPE REF TO IF_WD_CONTEXT_NODE,
      ELEM_IP_SELECTION                   TYPE REF TO IF_WD_CONTEXT_ELEMENT,
      STRU_IP_SELECTION                   TYPE IF_PLANNING_HISTORY=>ELEMENT_IP_SELECTION ,
      ITAB TYPE TABLE OF ZSL_PL_UPDATE1,
      WA TYPE ZSL_PL_UPDATE1.
navigate from <CONTEXT> to <IP_SELECTION> via lead selection
    NODE_IP_SELECTION = WD_CONTEXT->GET_CHILD_NODE( NAME = `IP_SELECTION` ).
get element via lead selection
    ELEM_IP_SELECTION = NODE_IP_SELECTION->GET_ELEMENT( ).
get all declared attributes
    ELEM_IP_SELECTION->GET_STATIC_ATTRIBUTES(
      IMPORTING
        STATIC_ATTRIBUTES = STRU_IP_SELECTION ).
CALL FUNCTION 'ZBAPI_PL_UPDATE'
        EXPORTING
          GV_LIFNR           = STRU_IP_SELECTION-LIFNR
          GV_MATNR           = STRU_IP_SELECTION-LIFNR
          GV_GJAHR           = ' '
        GV_WEEK_LOW        =   STRU_IP_SELECTION-FROM_WEEK
         GV_WEEK_HIGH       = STRU_IP_SELECTION-TO_WEEK
      IMPORTING
        RETURN             =
        TABLES
          GT_PL_UPDATE       = ITAB
         DATA:
           NODE_PLANN_NODE                     TYPE REF TO IF_WD_CONTEXT_NODE,
           ELEM_PLANN_NODE                     TYPE REF TO IF_WD_CONTEXT_ELEMENT,
           STRU_PLANN_NODE                     TYPE IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE,
           WA1 TYPE IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE,
           ITAB1 TYPE TABLE OF IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE.
          LOOP AT ITAB INTO WA.
           MOVE-CORRESPONDING WA TO WA1.
           APPEND WA1 TO ITAB1.
          ENDLOOP.
       navigate from <CONTEXT> to <PLANN_NODE> via lead selection
         NODE_PLANN_NODE = WD_CONTEXT->GET_CHILD_NODE( NAME = `PLANN_NODE` ).
         CALL METHOD NODE_PLANN_NODE->BIND_TABLE
           EXPORTING
             NEW_ITEMS            = ITAB1
            SET_INITIAL_ELEMENTS = ABAP_TRUE
            INDEX                =
ENDMETHOD.

CALL FUNCTION 'ZBAPI_PL_UPDATE'
EXPORTING
GV_LIFNR = STRU_IP_SELECTION-LIFNR
GV_MATNR = STRU_IP_SELECTION-LIFNR
GV_GJAHR = ' '
GV_WEEK_LOW = STRU_IP_SELECTION-FROM_WEEK
GV_WEEK_HIGH = STRU_IP_SELECTION-TO_WEEK
IMPORTING
RETURN =
TABLES
GT_PL_UPDATE = ITAB
Problem is here
check out the type GV_GJAHR whether it accepts string type.
thanks
sarbjeet singh

Error:Type conflict when calling a function module RFC_ERROR_SYSTEM_Failure

Hi Experts,
When I run my Application in Portal, i am getting the following error.
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
When I execute the BAPI, it is getting executed.
My Bapi Strucute:
Import Parameters
IM_MAT_Search --> ZPTIP_MAT --> Import Parameters
Tables
IT_INFO_REC --> ZMM_GET_ITEM --> Output Parameters
When I import the model, i am getting the structure like this
BAPI_Name > ZMM_BAPI_Input> IM_MAT_Search(respective Parameters) , Output (respective Tables and their parameters)
> ZMM_Input1> Parameters
This is the way, how i am executing in webdynpro java
Zmm_Bapi_Ptip_Search_Input eleInput = new Zmm_Bapi_Ptip_Search_Input();
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
Zptip_Asset eleInputAsset = new Zptip_Asset();
eleInputAsset.setSearch("ACRS");
wdContext.nodeZptip_Asset().bind(eleInputAsset);
eleInput.setIm_Ast_Search(eleInputAsset);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().currentZmm_Bapi_Ptip_Search_InputElement().modelObject().execute();
wdContext.nodeOutput().invalidate();
Please let me know, how to do the same.
Thanks in advance.
Regards,
Palani

Hi David,
I checked for the Parameter of setIm_Ast_Search, it is of Zptip_Asset.
Hi Saleem,
When I changed the same, i am getting the Type conflict error,
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
Please let me know,what can be done in this regard to solve the problem.
My BAPI Structure when imported as model
SearchBAPI
--> ZMM_BAPI_SEARCH_INPUT
> IM_AST_SEARCH(zPTIP_ASSET)
>Zptip_Asset
>Search (Parameter)
> OutPut(ZMM_BAPI_Search_Output)
>IT_Asser_Rec(ZMM_Asset)
>ZMM_Asset
>TXT100 (output Parameter)
--> ZMM_BAPI_SEARACH_OUTPUT
--> ZPTIP_ASSET
>Search (Parameter)
Thanks & Regards,
Palani
Edited by: Palani Appan on Nov 11, 2009 5:31 PM

Calling a function module from within a transformation routine

I created a routine within a transformation and experience the following weird behavior now:
When I call a function module within that routine, the load fails with the following error message:
Exceptions in Substep: Rules
When I click on the button next to this text, it point me to my function module call.
What I do not understand is, that the following two scenarios work fine:
- Having the same function call (with fake values) in a plain ABAP program works beautilfully
- If I copy the content of my function module directly into my transformation routine, everything works fine as well
I am now wondering whether the routine does not "see" the function module I am calling. The module resides in a different package. Is that a problem? Do I have to include something first?
Here is the code that calls my FM (
CALL FUNCTION 'Z_CA_CONVERT_US_COST'
     EXPORTING
        PSOURCEVAL                      = SOURCE_FIELDS-/BIC/USFRZMFC
        PSOURCEUOM                      = SOURCE_FIELDS-BASE_UOM
        PUSITM                          = SOURCE_FIELDS-/BIC/USITM
        PTARGETUOM                      = PRODUCTION_UOM
     IMPORTING
        PTARGETVAL                = RESULT
     EXCEPTIONS
       CONVERSION_NOT_MAINTAINED = 1
       PARTNO_NOT_FOUND          = 2
       OTHERS                    = 3.
Thanks a lot for your help. Points will be assigned.
Dennis

Good catch, BI Learner. This was exactly it: when assigning the values from SOURCEFIELDS directly to the import/export parameters, you have to make sure that the types are EXACTLY the same, otherwise it will not work (the routine stops with an error when calling the FM, but there is no dump).
Therefore, to solve my problem, I created the declarations precisely as expected by the FM and assigned the values to these fields:
DATA:
      SOURCEVAL TYPE /BIC/OIINVQTY,
      SOURCEUOM TYPE /BIC/OIUSUOM,
      USITM TYPE /BIC/OIUSITM,
      TARGETUOM TYPE /BIC/OIUSUOM,
      CONVERTED_COST TYPE /BIC/OIINVQTY.
DATA PRODUCTION_UOM TYPE /BIC/OIUSUOM.
" get the Production UOM
    SELECT SINGLE I~/BIC/USPRDUOM
      FROM /BIC/PUSITM AS I
      INTO PRODUCTION_UOM
      WHERE I~/BIC/USITM = SOURCE_FIELDS-/BIC/USITM AND I~OBJVERS = 'A'.
    IF ( SY-SUBRC = 4 ). " no records found
      "RAISE PARTNO_NOT_FOUND.
      RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
    ENDIF.
" load the parameters
    SOURCEVAL = SOURCE_FIELDS-/BIC/USFRZMFC.
    SOURCEUOM = SOURCE_FIELDS-BASE_UOM.
    USITM = SOURCE_FIELDS-/BIC/USITM.
" then you can call the FM
    CALL FUNCTION 'Z_CA_CONVERT_US_COST'
      EXPORTING
        PSOURCEVAL                = SOURCEVAL
        PSOURCEUOM                = SOURCEUOM
        PUSITM                    = USITM
        PTARGETUOM                = PRODUCTION_UOM
      IMPORTING
        PTARGETVAL                = CONVERTED_COST
      EXCEPTIONS
        CONVERSION_NOT_MAINTAINED = 1
        PARTNO_NOT_FOUND          = 2
        OTHERS                    = 3.
" ... [do the rest]
Thanks for your help,
Dennis

Standard Component in CRM that will call RFC Function Module

HI all,
Is there any Standard Component in CRM that will call RFC Function Module from ECC and that called RFC FM should Fetch the data from ECC.

You can call RFC from different places, like programs, function modules, web dynpros, classes...
So you just have to have appropriate RFC on ERP side and call it from CRM side. To call it you use the following statement...
      CALL FUNCTION 'YOUR RFC FUNCTION'
        DESTINATION i_dest "name of server
        EXPORTING
          your export parameters
        IMPORTING
          your import parameters
Regards.

Recursive call of function module 'CRM_ORDER_MAINTAIN'

Similar Messages

Maybe you are looking for